Compiling Wi-Fi driver

New features which should be implemented in Porteus Kiosk Edition and the kiosk wizard.
Forum rules
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
simver
Ronin
Ronin
Posts: 1
Joined: 02 Sep 2014, 13:27
Distribution: Kiosk
Location: Hungary

Compiling Wi-Fi driver

Post#1 by simver » 02 Sep 2014, 13:36

Hi,

I really like the Kiosk version, but I don't have a compatible Wi-Fi adapter. I bought one which I was hoping would work but it didn't, it's a D-Link GO-USB-N150.
It does come however with the source code for the driver (ftp://ftp.dlink.eu/Products/go/go-usb-n ... 120926.zip). I just don't know how I could complain and make it work under the Kiosk version. Some useful help page URLs seem to be dead and it's a little bit confusing what applies for the Desktop and what for the Kiosk version.

Could anyone help me a wee bit please?

Thanks!
Last edited by simver on 03 Sep 2014, 07:25, edited 1 time in total.

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Complaining Wi-Fi driver

Post#2 by fanthom » 02 Sep 2014, 14:45

hi simver,

please attach this dongle to any linux where it is working and show me the output of 'lsusb' and 'lsusb -t' commands. i care about the usbid the most.
thanks
Please add [Solved] to your thread title if the solution was found.

kroben
White ninja
White ninja
Posts: 4
Joined: 17 Nov 2014, 16:20
Distribution: porteus 3.0.1
Location: prague

Re: Compiling Wi-Fi driver

Post#3 by kroben » 17 Nov 2014, 16:24

Hello,

Same probleme here, from my porteus install i see the dongle with lsusb
the id is 2001:3311

thanks

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Compiling Wi-Fi driver

Post#4 by fanthom » 17 Nov 2014, 16:35

is the dongle working with desktop edition?
if yes then please provide output of following commands:
lsmod
lsusb
lsusb -t
dmesg

thanks
Please add [Solved] to your thread title if the solution was found.

kroben
White ninja
White ninja
Posts: 4
Joined: 17 Nov 2014, 16:20
Distribution: porteus 3.0.1
Location: prague

Re: Compiling Wi-Fi driver

Post#5 by kroben » 17 Nov 2014, 17:31

Hello

Code: Select all

lsmod

Module                  Size  Used by
ipv6                  171272  16 
wl                   5960836  0 
b44                    17588  0 
gspca_m5602            35652  0 
gspca_main             15380  1 gspca_m5602
snd_hda_codec_realtek    31532  1 
snd_hda_codec_generic    29728  2 snd_hda_codec_realtek
i915                  478776  3 
snd_hda_intel          22140  1 
snd_hda_codec          51232  3 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
snd_hwdep               2904  1 snd_hda_codec
acer_wmi               18604  0 
sparse_keymap           1484  1 acer_wmi
led_class               1500  1 acer_wmi
intel_agp               6316  0 
ssb                    30392  1 b44
libphy                 11524  1 b44
mii                     2388  1 b44
snd_pcm                39220  2 snd_hda_codec,snd_hda_intel
yenta_socket           13760  0 
pcmcia_rsrc             6276  1 yenta_socket
cfg80211              118972  1 wl
i2c_i801                6840  0 
pcmcia                 21540  1 ssb
pcmcia_core             6972  3 pcmcia,pcmcia_rsrc,yenta_socket
snd_timer              10240  1 snd_pcm
drm_kms_helper         23856  1 i915
rfkill                  8164  2 cfg80211,acer_wmi
irda                   59272  0 
intel_gtt               7092  3 i915,intel_agp
rng_core                1932  0 
wmi                     5128  1 acer_wmi
crc_ccitt                920  1 irda
thermal                 5864  0 
video                   8816  2 i915,acer_wmi

lsusb
Bus 001 Device 002: ID 18a5:0302 Verbatim, Ltd Flash Drive
Bus 001 Device 003: ID 0402:5602 ALi Corp. M5602 Video Camera Controller
Bus 001 Device 004: ID 2001:3311 D-Link Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


lsusb-t
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
    |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=ALi m5602, 480M
    |__ Port 5: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 480M

dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.14.15-porteus (root@porteus) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Sun Aug 3 12:59:14 Local time zone must be set--s
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f67ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f680000-0x000000003f6fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f700000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Acer             TravelMate 2490 /Grapevine, BIOS V3.01 10/25/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f680 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 03F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] found SMP MP-table at [mem 0x000f6510-0x000f651f] mapped at [c00f6510]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x01638000, 0x01638fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3f5d4000-0x3f67efff]
[    0.000000] Allocated new RAMDISK: [mem 0x37753000-0x377fdab3]
[    0.000000] Move RAMDISK from [mem 0x3f5d4000-0x3f67eab3] to [mem 0x37753000-0x377fdab3]
[    0.000000] ACPI: RSDP 000f64e0 000014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 3f687449 000048 (v01 PTLTD  Capell00 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3f68de2e 000074 (v01 Acer   Grape    06040000 LOHR 0000005A)
[    0.000000] ACPI: DSDT 3f688098 005D96 (v01 Acer   CALISTGA 06040000 INTL 20050228)
[    0.000000] ACPI: FACS 3f68efc0 000040
[    0.000000] ACPI: APIC 3f68dea2 000068 (v01 Acer   Grape    06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 3f68df0a 000038 (v01 Acer   Grape    06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 3f68df42 00003C (v01 Acer   Grape    06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC 3f68df7e 00005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 3f68dfd8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 3f687bd6 0004C2 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
[    0.000000] ACPI: SSDT 3f687977 00025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT 3f687491 0004E6 (v01  PmRef    CpuPm 00003000 INTL 20050228)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x01639000, 0x01639fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x3f67ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3f67ffff]
[    0.000000] On node 0 totalpages: 259614
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32386 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f6f35000 s27840 r0 d21312 u49152
[    0.000000] pcpu-alloc: s27840 r0 d21312 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257838
[    0.000000] Kernel command line: quiet initrd=initrd.xz changes=/mnt/sda1/savefile.dat timezone=Europe/Prague kmap=fr,us BOOT_IMAGE=vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f680)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1022216K/1038456K available (4232K kernel code, 297K rwdata, 984K rodata, 428K init, 372K bss, 16240K reserved, 129544K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1565000 - 0xc15d0000   ( 428 kB)
[    0.000000]       .data : 0xc14226c7 - 0xc1564640   (1287 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14226c7   (4233 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1596.018 MHz processor
[    0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.03 BogoMIPS (lpj=1596018)
[    0.001020] pid_max: default: 32768 minimum: 301
[    0.001036] ACPI: Core revision 20131218
[    0.006521] ACPI: All ACPI Tables successfully acquired
[    0.007049] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007054] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008142] Initializing cgroup subsys net_cls
[    0.008178] Disabled fast string operations
[    0.008186] mce: CPU supports 6 MCE banks
[    0.008198] CPU0: Thermal monitoring enabled (TM1)
[    0.008216] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.008216] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.008216] tlb_flushall_shift: 6
[    0.010904] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.011396] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.021413] smpboot: CPU0: Intel(R) Celeron(R) M CPU        420  @ 1.60GHz (fam: 06, model: 0e, stepping: 08)
[    0.022000] Performance Events: Core events, core PMU driver.
[    0.022000] ... version:                1
[    0.022000] ... bit width:              40
[    0.022000] ... generic registers:      2
[    0.022000] ... value mask:             000000ffffffffff
[    0.022000] ... max period:             000000007fffffff
[    0.022000] ... fixed-purpose events:   0
[    0.022000] ... event mask:             0000000000000003
[    0.025087] x86: Booted up 1 node, 1 CPUs
[    0.025091] smpboot: Total of 1 processors activated (3192.03 BogoMIPS)
[    0.025917] devtmpfs: initialized
[    0.026437] PM: Registering ACPI NVS region [mem 0x3f680000-0x3f6fffff] (524288 bytes)
[    0.026641] pinctrl core: initialized pinctrl subsystem
[    0.026731] NET: Registered protocol family 16
[    0.027326] EISA bus registered
[    0.027330] cpuidle: using governor ladder
[    0.027333] cpuidle: using governor menu
[    0.027460] ACPI: bus type PCI registered
[    0.027463] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.027680] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.027687] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.027689] PCI: Using MMCONFIG for extended config space
[    0.027692] PCI: Using configuration type 1 for base access
[    0.039865] bio: create slab <bio-0> at 0
[    0.040214] ACPI: Added _OSI(Module Device)
[    0.040218] ACPI: Added _OSI(Processor Device)
[    0.040220] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040223] ACPI: Added _OSI(Processor Aggregator Device)
[    0.045076] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.046134] ACPI: Interpreter enabled
[    0.046154] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.046161] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.046181] ACPI: (supports S0 S3 S4 S5)
[    0.046184] ACPI: Using IOAPIC for interrupt routing
[    0.046261] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.046498] ACPI: No dock devices found.
[    0.124468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.124480] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.124489] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.125225] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.125230] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.125234] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.125239] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.125243] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.125247] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.125251] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.125255] acpi PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.125259] PCI: root bus 00: using default resources
[    0.125553] PCI host bridge to bus 0000:00
[    0.125559] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.125563] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.125567] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.125582] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.125765] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.125782] pci 0000:00:02.0: reg 0x10: [mem 0xd0100000-0xd017ffff]
[    0.125791] pci 0000:00:02.0: reg 0x14: [io  0x1800-0x1807]
[    0.125800] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.125809] pci 0000:00:02.0: reg 0x1c: [mem 0xd0200000-0xd023ffff]
[    0.125987] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.126021] pci 0000:00:02.1: reg 0x10: [mem 0xd0180000-0xd01fffff]
[    0.126260] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.126288] pci 0000:00:1b.0: reg 0x10: [mem 0xd0240000-0xd0243fff 64bit]
[    0.126417] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.126487] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.126602] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.126726] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.126902] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.127063] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.127242] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.127374] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.127545] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.127678] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.127854] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.127918] pci 0000:00:1d.0: reg 0x20: [io  0x1820-0x183f]
[    0.128049] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.128166] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.128229] pci 0000:00:1d.1: reg 0x20: [io  0x1840-0x185f]
[    0.128335] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.128442] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.128507] pci 0000:00:1d.2: reg 0x20: [io  0x1860-0x187f]
[    0.128611] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.128720] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.128785] pci 0000:00:1d.3: reg 0x20: [io  0x1880-0x189f]
[    0.128889] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.129024] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.129053] pci 0000:00:1d.7: reg 0x10: [mem 0xd0444000-0xd04443ff]
[    0.129170] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.129233] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.129353] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.129573] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.129697] pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[    0.129706] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.129712] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f)
[    0.129718] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f)
[    0.129908] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.129928] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.129943] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.129957] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.129971] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.129986] pci 0000:00:1f.1: reg 0x20: [io  0x1810-0x181f]
[    0.130175] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.130255] pci 0000:00:1f.3: reg 0x20: [io  0x18a0-0x18bf]
[    0.130644] acpiphp: Slot [1] registered
[    0.130656] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.130665] pci 0000:00:1c.0:   bridge window [io  0x0000-0x0fff]
[    0.130672] pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff]
[    0.130822] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.130983] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.131160] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.131300] pci 0000:06:01.0: [14e4:170c] type 00 class 0x020000
[    0.131326] pci 0000:06:01.0: reg 0x10: [mem 0xd0000000-0xd0001fff]
[    0.131430] pci 0000:06:01.0: supports D1 D2
[    0.131434] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.131462] pci 0000:06:01.0: System wakeup disabled by ACPI
[    0.131574] pci 0000:06:02.0: [14e4:4318] type 00 class 0x028000
[    0.131593] pci 0000:06:02.0: reg 0x10: [mem 0xd0002000-0xd0003fff]
[    0.131765] pci 0000:06:04.0: [1524:1412] type 02 class 0x060700
[    0.131796] pci 0000:06:04.0: reg 0x10: [mem 0xd0004000-0xd0004fff]
[    0.131841] pci 0000:06:04.0: supports D1 D2
[    0.131845] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.131981] pci 0000:06:04.1: [1524:0530] type 00 class 0x050100
[    0.132020] pci 0000:06:04.1: reg 0x10: [mem 0xd0005000-0xd000507f]
[    0.132121] pci 0000:06:04.1: supports D1 D2
[    0.132124] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
[    0.132263] pci 0000:06:04.2: [1524:0550] type 00 class 0x080501
[    0.132288] pci 0000:06:04.2: reg 0x10: [mem 0xd0005400-0xd00054ff]
[    0.132388] pci 0000:06:04.2: supports D1 D2
[    0.132391] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[    0.132522] pci 0000:06:04.3: [1524:0520] type 00 class 0x050100
[    0.132547] pci 0000:06:04.3: reg 0x10: [mem 0xd0005800-0xd000587f]
[    0.132645] pci 0000:06:04.3: supports D1 D2
[    0.132649] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[    0.132781] pci 0000:06:04.4: [1524:0551] type 00 class 0x050100
[    0.132807] pci 0000:06:04.4: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.132905] pci 0000:06:04.4: supports D1 D2
[    0.132908] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[    0.133097] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.133108] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.133119] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.133123] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.133227] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-07] (conflicts with (null) [bus 06-07])
[    0.133235] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[    0.133240] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06-07] (conflicts with (null) [bus 06-07])
[    0.133248] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.133288] pci_bus 0000:00: on NUMA node 0
[    0.133500] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
[    0.133584] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
[    0.133666] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
[    0.133749] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
[    0.133831] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled.
[    0.133914] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10
[    0.133997] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
[    0.134102] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
[    0.156310] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.156371] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.156618] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.156627] vgaarb: loaded
[    0.156629] vgaarb: bridge control possible 0000:00:02.0
[    0.156963] SCSI subsystem initialized
[    0.157115] libata version 3.00 loaded.
[    0.157123] ACPI: bus type USB registered
[    0.157238] usbcore: registered new interface driver usbfs
[    0.157290] usbcore: registered new interface driver hub
[    0.157350] usbcore: registered new device driver usb
[    0.157474] Linux video capture interface: v2.00
[    0.157837] Advanced Linux Sound Architecture Driver Initialized.
[    0.157841] PCI: Using ACPI for IRQ routing
[    0.171002] PCI: pci_cache_line_size set to 64 bytes
[    0.171098] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.171102] e820: reserve RAM buffer [mem 0x3f680000-0x3fffffff]
[    0.171554] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.171565] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.171571] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.173059] Switched to clocksource hpet
[    0.173198] pnp: PnP ACPI init
[    0.173216] ACPI: bus type PNP registered
[    0.173373] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.173378] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.173383] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.173387] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.173392] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.173396] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.173403] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.198041] pnp 00:01: [dma 4]
[    0.198121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.198216] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.198414] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.198421] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.198528] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.198677] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.198683] system 00:05: [io  0x1000-0x107f] could not be reserved
[    0.198687] system 00:05: [io  0x1180-0x11bf] has been reserved
[    0.198691] system 00:05: [io  0x1640-0x164f] has been reserved
[    0.198696] system 00:05: [io  0xfe00-0xfefe] has been reserved
[    0.198700] system 00:05: [io  0xff2c-0xff2f] has been reserved
[    0.198706] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.198802] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.198903] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.199065] pnp 00:08: Plug and Play ACPI device, IDs SYN0703 SYN0700 SYN0002 PNP0f13 (active)
[    0.199117] pnp: PnP ACPI: found 9 devices
[    0.199120] ACPI: bus type PNP unregistered
[    0.199124] PnPBIOS: Disabled by ACPI PNP
[    0.239474] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.239482] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.239487] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.239502] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.239507] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.239512] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[    0.239526] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.239531] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.239536] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[    0.239551] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.239556] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[    0.239561] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
[    0.239584] pci 0000:06:04.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.239589] pci 0000:06:04.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.239595] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 06-07] add_size 1000
[    0.239600] pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.239606] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-07] add_size 4000000
[    0.239617] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.239625] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.239630] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.239635] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.239639] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.239644] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.239648] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.239653] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.239658] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.239662] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.239667] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.239671] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.239676] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.239680] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.239684] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.239694] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.239699] pci 0000:00:1c.0: BAR 14: assigned [mem 0x44000000-0x441fffff]
[    0.239704] pci 0000:00:1c.0: BAR 15: assigned [mem 0x44200000-0x443fffff 64bit pref]
[    0.239709] pci 0000:00:1c.1: BAR 14: assigned [mem 0x44400000-0x445fffff]
[    0.239714] pci 0000:00:1c.1: BAR 15: assigned [mem 0x44600000-0x447fffff 64bit pref]
[    0.239719] pci 0000:00:1c.2: BAR 14: assigned [mem 0x44800000-0x449fffff]
[    0.239725] pci 0000:00:1c.2: BAR 15: assigned [mem 0x44a00000-0x44bfffff 64bit pref]
[    0.239729] pci 0000:00:1c.3: BAR 14: assigned [mem 0x44c00000-0x44dfffff]
[    0.239735] pci 0000:00:1c.3: BAR 15: assigned [mem 0x44e00000-0x44ffffff 64bit pref]
[    0.239741] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.239746] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.239751] pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
[    0.239756] pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]
[    0.239761] pci 0000:00:1e.0: BAR 13: assigned [io  0x6000-0x6fff]
[    0.239769] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.239774] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.239782] pci 0000:00:1c.0:   bridge window [mem 0x44000000-0x441fffff]
[    0.239789] pci 0000:00:1c.0:   bridge window [mem 0x44200000-0x443fffff 64bit pref]
[    0.239799] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.239804] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.239813] pci 0000:00:1c.1:   bridge window [mem 0x44400000-0x445fffff]
[    0.239820] pci 0000:00:1c.1:   bridge window [mem 0x44600000-0x447fffff 64bit pref]
[    0.239829] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.239835] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.239843] pci 0000:00:1c.2:   bridge window [mem 0x44800000-0x449fffff]
[    0.239850] pci 0000:00:1c.2:   bridge window [mem 0x44a00000-0x44bfffff 64bit pref]
[    0.239860] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.239865] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.239873] pci 0000:00:1c.3:   bridge window [mem 0x44c00000-0x44dfffff]
[    0.239880] pci 0000:00:1c.3:   bridge window [mem 0x44e00000-0x44ffffff 64bit pref]
[    0.239894] pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.239899] pci 0000:06:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.239903] pci 0000:06:04.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.239907] pci 0000:06:04.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.239912] pci 0000:06:04.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.239919] pci 0000:06:04.0: BAR 16: assigned [mem 0xd4000000-0xd7ffffff]
[    0.239923] pci 0000:06:04.0: BAR 13: assigned [io  0x6000-0x60ff]
[    0.239928] pci 0000:06:04.0: BAR 14: assigned [io  0x6400-0x64ff]
[    0.239932] pci 0000:06:04.4: BAR 0: assigned [mem 0xd0005100-0xd00051ff]
[    0.239942] pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
[    0.239945] pci 0000:06:04.0:   bridge window [io  0x6000-0x60ff]
[    0.239953] pci 0000:06:04.0:   bridge window [io  0x6400-0x64ff]
[    0.239961] pci 0000:06:04.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.239969] pci 0000:06:04.0:   bridge window [mem 0xd4000000-0xd7ffffff]
[    0.239976] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.239981] pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
[    0.239989] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.239996] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.240016] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.240020] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.240025] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.240029] pci_bus 0000:02: resource 1 [mem 0x44000000-0x441fffff]
[    0.240033] pci_bus 0000:02: resource 2 [mem 0x44200000-0x443fffff 64bit pref]
[    0.240037] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.240041] pci_bus 0000:03: resource 1 [mem 0x44400000-0x445fffff]
[    0.240045] pci_bus 0000:03: resource 2 [mem 0x44600000-0x447fffff 64bit pref]
[    0.240049] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.240053] pci_bus 0000:04: resource 1 [mem 0x44800000-0x449fffff]
[    0.240058] pci_bus 0000:04: resource 2 [mem 0x44a00000-0x44bfffff 64bit pref]
[    0.240062] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
[    0.240066] pci_bus 0000:05: resource 1 [mem 0x44c00000-0x44dfffff]
[    0.240070] pci_bus 0000:05: resource 2 [mem 0x44e00000-0x44ffffff 64bit pref]
[    0.240074] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
[    0.240078] pci_bus 0000:06: resource 1 [mem 0xd0000000-0xd00fffff]
[    0.240082] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.240086] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.240090] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.240094] pci_bus 0000:07: resource 0 [io  0x6000-0x60ff]
[    0.240098] pci_bus 0000:07: resource 1 [io  0x6400-0x64ff]
[    0.240102] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.240106] pci_bus 0000:07: resource 3 [mem 0xd4000000-0xd7ffffff]
[    0.240160] NET: Registered protocol family 2
[    0.240369] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.240402] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.240458] TCP: Hash tables configured (established 8192 bind 8192)
[    0.240496] TCP: reno registered
[    0.240501] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.240514] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.240603] NET: Registered protocol family 1
[    0.240626] pci 0000:00:02.0: Boot video device
[    0.242270] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.242513] Unpacking initramfs...
[    0.398597] Freeing initrd memory: 684K (f7753000 - f77fe000)
[    0.398738] Simple Boot Flag at 0x36 set to 0x1
[    0.399671] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.400147] bounce pool size: 64 pages
[    0.405825] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.406092] fuse init (API version 7.22)
[    0.406337] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.407370] aufs 3.14-20140721
[    0.407378] msgmni has been set to 1744
[    0.407641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.407645] io scheduler noop registered
[    0.407648] io scheduler deadline registered (default)
[    0.407838] pcieport 0000:00:1c.0: enabling device (0100 -> 0103)
[    0.408139] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.408478] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.408804] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.409164] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.409511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.409637] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.409750] intel_idle: does not run on family 6 model 14
[    0.413594] ACPI: AC Adapter [ACAD] (on-line)
[    0.413816] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.413842] ACPI: Lid Switch [LID]
[    0.413964] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.413971] ACPI: Sleep Button [SLPB]
[    0.414113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.414118] ACPI: Power Button [PWRB]
[    0.414450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.414455] ACPI: Power Button [PWRF]
[    0.420839] tsc: Marking TSC unstable due to TSC halts in idle
[    0.420854] ACPI: acpi_idle registered with cpuidle
[    0.421081] isapnp: Scanning for PnP cards...
[    0.471018] ACPI : EC: GPE storm detected(10 GPEs), transactions will use polling mode
[    0.778027] isapnp: No Plug & Play device found
[    0.802162] ACPI: Battery Slot [BAT1] (battery present)
[    0.802412] Linux agpgart interface v0.103
[    0.802466] [drm] Initialized drm 1.1.0 20060810
[    0.804370] loop: module loaded
[    0.805382] ata_piix 0000:00:1f.1: version 2.13
[    0.806835] scsi0 : ata_piix
[    0.807108] scsi1 : ata_piix
[    0.807246] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.807250] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.807456] ata2: port disabled--ignoring
[    0.810608] Fusion MPT base driver 3.04.20
[    0.810611] Copyright (c) 1999-2008 LSI Corporation
[    0.810625] Fusion MPT SPI Host driver 3.04.20
[    0.810687] Fusion MPT SAS Host driver 3.04.20
[    0.810763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.810765] ehci-pci: EHCI PCI platform driver
[    0.810995] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.811071] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.811093] ehci-pci 0000:00:1d.7: debug port 1
[    0.815056] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.815088] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0444000
[    0.821055] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.821416] hub 1-0:1.0: USB hub found
[    0.821431] hub 1-0:1.0: 8 ports detected
[    0.821949] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.821959] ohci-pci: OHCI PCI platform driver
[    0.822040] uhci_hcd: USB Universal Host Controller Interface driver
[    0.822247] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.822257] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.822289] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.822626] hub 2-0:1.0: USB hub found
[    0.822639] hub 2-0:1.0: 2 ports detected
[    0.822972] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.822981] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.823042] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.823380] hub 3-0:1.0: USB hub found
[    0.823392] hub 3-0:1.0: 2 ports detected
[    0.823724] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.823737] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.823783] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.824150] hub 4-0:1.0: USB hub found
[    0.824162] hub 4-0:1.0: 2 ports detected
[    0.824491] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.824500] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.824546] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.824870] hub 5-0:1.0: USB hub found
[    0.824883] hub 5-0:1.0: 2 ports detected
[    0.825294] usbcore: registered new interface driver usb-storage
[    0.825344] usbcore: registered new interface driver ums-alauda
[    0.825394] usbcore: registered new interface driver ums-cypress
[    0.825444] usbcore: registered new interface driver ums-datafab
[    0.825492] usbcore: registered new interface driver ums-freecom
[    0.825543] usbcore: registered new interface driver ums-isd200
[    0.825592] usbcore: registered new interface driver ums-jumpshot
[    0.825641] usbcore: registered new interface driver ums-karma
[    0.825690] usbcore: registered new interface driver ums-onetouch
[    0.825749] usbcore: registered new interface driver ums-realtek
[    0.825799] usbcore: registered new interface driver ums-sddr09
[    0.825849] usbcore: registered new interface driver ums-sddr55
[    0.825898] usbcore: registered new interface driver ums-usbat
[    0.826060] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    0.828260] i8042: Detected active multiplexing controller, rev 1.1
[    0.828358] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.828424] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.828433] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.828437] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.828441] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.828866] mousedev: PS/2 mouse device common for all mice
[    0.829504] rtc_cmos 00:06: RTC can wake from S4
[    0.829742] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.829792] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.829926] platform eisa.0: Probing EISA bus 0
[    0.829938] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.829943] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.829947] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.829951] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.829955] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.829959] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.829971] platform eisa.0: EISA: Detected 0 cards
[    0.830053] sdhci: Secure Digital Host Controller Interface driver
[    0.830056] sdhci: Copyright(c) Pierre Ossman
[    0.830095] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[    0.830112] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    0.830127] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
[    0.830360] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[    0.830386] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[    0.830398] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[    0.830588] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[    0.830692] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    0.830694] wbsd: Copyright(c) Pierre Ossman
[    0.830884] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    0.831065] usbcore: registered new interface driver vub300
[    0.831609] hidraw: raw HID events driver (C) Jiri Kosina
[    0.831738] usbcore: registered new interface driver usbhid
[    0.831741] usbhid: USB HID core driver
[    0.831930] TCP: cubic registered
[    0.831934] NET: Registered protocol family 17
[    0.832392] Using IPI No-Shortcut mode
[    0.832660] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.833059] registered taskstats version 1
[    0.833676] rtc_cmos 00:06: setting system clock to 2014-11-17 18:07:28 UTC (1416247648)
[    0.833696] ALSA device list:
[    0.833698]   No soundcards found.
[    0.961459] ata1.01: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.00, max UDMA/33
[    0.967333] ata1.01: configured for UDMA/33
[    0.980762] scsi 0:0:1:0: CD-ROM            PIONEER  DVD-RW DVR-K17RS 1.00 PQ: 0 ANSI: 5
[    1.000972] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.000976] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.001225] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.001758] Freeing unused kernel memory: 428K (c1565000 - c15d0000)
[    1.123055] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.240851] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.240936] scsi2 : usb-storage 1-1:1.0
[    1.343048] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    1.449474] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0, board id: 3655, fw id: 235996
[    1.479545] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[    1.567046] usb 1-5: new high-speed USB device number 4 using ehci-pci
[    2.246262] scsi 2:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 4
[    2.247491] sd 2:0:0:0: [sda] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
[    2.248110] sd 2:0:0:0: [sda] Write Protect is off
[    2.248116] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[    2.248729] sd 2:0:0:0: [sda] No Caching mode page found
[    2.248733] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.252229] sd 2:0:0:0: [sda] No Caching mode page found
[    2.252233] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.253251]  sda: sda1
[    2.255979] sd 2:0:0:0: [sda] No Caching mode page found
[    2.255983] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    2.255988] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    2.332238] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    3.531070] random: nonblocking pool is initialized
[    4.734376] XFS (loop1): Mounting Filesystem
[    4.885439] XFS (loop1): Ending clean mount
[    7.236175] udevd[1282]: starting version 182
[    8.075429] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.075670] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[    8.144116] thermal LNXTHERM:00: registered as thermal_zone0
[    8.144123] ACPI: Thermal Zone [TZ00] (52 C)
[    8.211866] thermal LNXTHERM:01: registered as thermal_zone1
[    8.211872] ACPI: Thermal Zone [TZ01] (52 C)
[    8.351345] wmi: Mapper loaded
[    8.536297] intel_rng: FWH not detected
[    8.542662] NET: Registered protocol family 23
[    8.923435] ACPI Warning: SystemIO range 0x000018a0-0x000018bf conflicts with OpRegion 0x000018a0-0x000018af (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[    8.923449] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.041674] cfg80211: Calling CRDA to update world regulatory domain
[    9.100912] yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090]
[    9.100945] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[    9.100949] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[    9.100956] yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44
[    9.528627] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    9.528661] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    9.528853] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    9.539449] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    9.632676] acer_wmi: Acer Laptop ACPI-WMI Extras
[    9.641091] acer_wmi: Function bitmap for Communication Device: 0x31
[    9.641108] acer_wmi: Disabling ACPI video driver
[    9.654443] input: Acer BMA150 accelerometer as /devices/virtual/input/input14
[    9.851228] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    9.895279] [drm] Memory usable by graphics device = 256M
[    9.922074] hda_codec: ALC883: SKU not ready 0x411111f0
[    9.927560] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.927565] [drm] Driver supports precise vblank timestamp query.
[    9.927676] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.029436] gspca_main: v2.14.0 registered
[   10.032105] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   10.032112] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[   10.032119] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   10.032135] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io  0x6000-0x6fff]
[   10.032140] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff:
[   10.042890]  excluding 0x6000-0x60ff
[   10.043566] [drm] initialized overlay support
[   10.062599] gspca_main: ALi m5602-2.14.0 probing 0402:5602
[   10.180159]  0x6400-0x64ff
[   10.313086] gspca_m5602: Sensor reported 0xffff
[   10.342934] 
[   10.342950] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd00fffff]
[   10.342957] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd00fffff:
[   10.342962]  excluding 0xd0000000-0xd000ffff
[   10.342977] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[   10.342982] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff:
[   10.342994]  excluding 0x40000000-0x43ffffff
[   10.397099] b43-pci-bridge 0000:06:02.0: enabling device (0000 -> 0002)
[   10.414201] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[   10.414215] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[   10.414224] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[   10.414233] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[   10.414241] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[   10.475300] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[   10.531076] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[   10.531088] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[   10.531097] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[   10.531105] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[   10.695311] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
[   10.695739] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[   10.723021] gspca_m5602: Detected a s5k83a sensor
[   10.735356] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:16:d4:60:e3:14
[   10.798598] usbcore: registered new interface driver ALi m5602
[   11.064143] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff:
[   11.064849]  excluding 0xcf8-0xcff
[   11.064913] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   11.068224] fbcon: inteldrmfb (fb0) is primary device
[   11.133262]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   11.133382] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   11.174237] wl: module license 'unspecified' taints kernel.
[   11.174240] Disabling lock debugging due to kernel taint
[   11.191750]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   11.212788] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   11.214199]  excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xe0000-0xfffff
[   11.218731] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   11.218751]  clean.
[   11.218838] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   11.218854]  clean.
[   11.218912] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   11.246680]  clean.
[   11.904449] Console: switching to colour frame buffer device 160x50
[   11.981707] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.981711] i915 0000:00:02.0: registered panic notifier
[   11.981869] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.992060] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15
[   11.996057] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.264508] NET: Registered protocol family 10
[   15.777377] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4059.002229] b44 ssb1:0 eth0: Link is up at 100 Mbps, full duplex
[ 4059.002237] b44 ssb1:0 eth0: Flow control is off for TX and off for RX
[ 4059.002541] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4111.002124] b44 ssb1:0 eth0: Link is down
[ 4113.002233] b44 ssb1:0 eth0: Link is up at 100 Mbps, full duplex
[ 4113.002241] b44 ssb1:0 eth0: Flow control is off for TX and off for RX

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Compiling Wi-Fi driver

Post#6 by fanthom » 17 Nov 2014, 18:08

@kroben
i see that this device does not work with desktop edition either. anyway - i have found solution up here:
http://forums.linuxmint.com/viewtopic.php?f=53&t=153544

please contact me on support@porteus-kiosk.org and i'll send you kernel config + aufs patch so you can recreate the kiosk kernel and then compile modified rtl8188eu driver against kiosk kernel sources.

you could go with original drivers from DLink:
http://www.dlink.com/uk/en/support/prod ... n=deu_reva
but i think you will still need kiosk kernel sources

thanks
Please add [Solved] to your thread title if the solution was found.

kroben
White ninja
White ninja
Posts: 4
Joined: 17 Nov 2014, 16:20
Distribution: porteus 3.0.1
Location: prague

Re: Compiling Wi-Fi driver

Post#7 by kroben » 17 Nov 2014, 19:06

hello,

thanks for the quick answer,i'll check the solution tomorrow and then contact you to get the sources at the address you sent.

have a nice evening

kroben

kroben
White ninja
White ninja
Posts: 4
Joined: 17 Nov 2014, 16:20
Distribution: porteus 3.0.1
Location: prague

Re: Compiling Wi-Fi driver

Post#8 by kroben » 22 Nov 2014, 20:34

@fanthom

I use the desktop version, and i managed to get it working with the solution you found.
I downloaded the driver from here https://github.com/lwfinger/rtl8188eu.git and it has apparently been updated (no need to tweak the rtl8188eu/os_dep/usb_intf.c file anymore)
I recompiled it against the 3.7.8 kernel and it is now working perfectly

thanks for your help

kroben

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Compiling Wi-Fi driver

Post#9 by fanthom » 23 Nov 2014, 14:54

ahh - you have posted in the kiosk section of the forum and i got confused.
glad that its resolved.
Please add [Solved] to your thread title if the solution was found.

Locked