conky 1.9.0

Post links to your 64bit module repos here. Repo maintainers are responsible for resolving any issues caused by their xzm's.
Post Reply
Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

conky 1.9.0

Post#1 by Kriss » 12 Nov 2011, 15:16

Update (2014-03-12) Since I've lost my usb flash, I decided to rebuild everything from scratch:
conky-1.9.0-nolua.xzm
conky-1.9.0.xzm (depends on lua at least, didn't test it though)
lua-5.1.5-x86_64-1cf.xzm (example lua module)
Compiled from official sources on clean porteus 3.0 (+devel)

Code: Select all

./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-lua
mkdir /new
make && make install DESTDIR=/new
--disable-lua flag was used for "nolua version"
added "/usr/share/autostart/conky.desktop" script

P.S. I tried to use version, created by freestyler, but didn't want to install dependancies like imlib, so I compiled it like this.
Update (2012-04-12) re-upload conky-1.8.1-2.xzm

Hello all!
Here's a little something I use: conky 1.8.1, system monitor, a fork ot torsmo.
It looks like this (bottom right corner).
This version doesn't requre lua and probably other deps unlike Slackware package.
Configured with options "--prefix=/usr --sysconfdir=/etc --disable-lua --enable-wlan"

About dependencies: feh is used if you don't want to see black rectangle under conky, giblib and imlib2 are used by feh

Here's example config file I use (place it in /etc/conky/conky.conf)

Code: Select all

alignment bottom_right
background yes
border_inner_margin 8
border_width 2
color1 white
# light blue
color2 red
color3 brown
color4 green
color5 pink
color6 yellow
color7 cyan
cpu_avg_samples 2
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
draw_borders no
draw_graph_borders yes
draw_outline yes
draw_shades no
default_shade_color 000000
extra_newline no
# Gap between borders of screen and text
gap_x 5
gap_y 5
maximum_width 335 0
#minimum_size 5 5
net_avg_samples 2
no_buffers no
out_to_console no
out_to_stderr no
override_utf8_locale yes
own_window yes
own_window_colour black
own_window_class Conky
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_transparent yes
#own_window_type override
#own_window_argb_130
show_graph_range no
show_graph_scale no
stippled_borders 4
text_buffer_size 2048
update_interval 3.0
uppercase no
# adds spaces around certain objects to stop them from moving other things around
use_spacer right
#use_xft yes
#xftalpha 0.8
#xftfont DejaVu Sans Mono:size=8
#font -misc-fixed-medium-r-semicondensed-*-*-100-*-*-c-*-iso8859-1
font -misc-fixed-medium-r-semicondensed-*-*-*-*-*-*-*-*
#font -misc-fixed-medium-r-semicondensed-*-*-100-*-*-c-*-utf8


TEXT
${texeci 24 feh --bg-fill "`grep 'wallpaper=/' ~/.kde4/share/config/plasma-desktop-appletsrc | sed  's/wallpaper=//' | sed q`"}
${color5}$nodename/$kernel $machine Uptime: $uptime
${color4}CPU ${freq}MHz x ${execi 18000 cat /proc/cpuinfo | grep processor | wc -l}${alignr}${if_match "${cpu cpu0}" > "85" }${color2}${endif}${cpubar cpu0 2,235}
${color1}Core1${color} ${cpu cpu1}% ${if_match "${execi 18000 sensors | grep Core0 -c}"=="2"}${execi 3 sensors | grep Core0 | tail +15c | head -2c}(~${execi 3 sensors | grep Core0 | sed -n '/Core0 Temp/ {n;p}' | tail +15c|head -2c})'C${color1}${if_match "${cpu cpu1}" > "95" }${color2}${endif} ${alignr}${cpubar cpu1 2,210}${else}${alignr}${cpubar cpu1 2,235}${endif}${if_existing /sys/devices/system/cpu/cpu1}
${color1}Core2${color} ${cpu cpu2}% ${if_match "${execi 18000 sensors | grep Core1 -c}"=="2"}${execi 3 sensors | grep Core1 | tail +15c | head -2c}(~${execi 3 sensors | grep Core1 | sed -n '/Core1 Temp/ {n;p}' | tail +15c|head -2c})'C${color1}${if_match "${cpu cpu2}" > "95" }${color2}${endif} ${alignr}${cpubar cpu2 2,210}${else}${alignr}${cpubar cpu2 2,235}${endif}${endif}${if_existing /sys/devices/system/cpu/cpu2}
${color1}Core3${color} ${cpu cpu3}% ${if_match "${execi 18000 sensors | grep Core2 -c}"=="2"}${execi 3 sensors | grep Core2 | tail +15c | head -2c}(~${execi 3 sensors | grep Core2 | sed -n '/Core2 Temp/ {n;p}' | tail +15c|head -2c})'C${color1}${if_match "${cpu cpu3}" > "95" }${color2}${endif} ${alignr}${cpubar cpu3 2,210}${else}${alignr}${cpubar cpu3 2,235}${endif}${endif}${if_existing /sys/devices/system/cpu/cpu3}
${color1}Core4${color} ${cpu cpu4}% ${if_match "${execi 18000 sensors | grep Core3 -c}"=="2"}${execi 3 sensors | grep Core3 | tail +15c | head -2c}(~${execi 3 sensors | grep Core3 | sed -n '/Core3 Temp/ {n;p}' | tail +15c|head -2c})'C${color1}${if_match "${cpu cpu4}" > "95" }${color2}${endif} ${alignr}${cpubar cpu4 2,210}${else}${alignr}${cpubar cpu4 2,235}${endif}${endif}${if_existing /sys/devices/system/cpu/cpu4}
${color1}Core5${color} ${cpu cpu5}% ${if_match "${execi 18000 sensors | grep Core4 -c}"=="2"}${execi 3 sensors | grep Core4 | tail +15c | head -2c}(~${execi 3 sensors | grep Core4 | sed -n '/Core4 Temp/ {n;p}' | tail +15c|head -2c})'C${color1}${if_match "${cpu cpu5}" > "95" }${color2}${endif} ${alignr}${cpubar cpu5 2,210}${else}${alignr}${cpubar cpu5 2,235}${endif}${endif}${if_existing /sys/devices/system/cpu/cpu5}
${color1}Core6${color} ${cpu cpu6}% ${if_match "${execi 18000 sensors | grep Core5 -c}"=="2"}${execi 3 sensors | grep Core5 | tail +15c | head -2c}(~${execi 3 sensors | grep Core5 | sed -n '/Core5 Temp/ {n;p}' | tail +15c|head -2c})'C${color1}${if_match "${cpu cpu6}" > "95" }${color2}${endif} ${alignr}${cpubar cpu6 2,210}${else}${alignr}${cpubar cpu6 2,235}${endif}${endif}
${cpugraph 000000 ffffff}
${color1}Load:${color} ${loadavg}    ${color1}Processes:${color} $processes  ${alignr}${color1}Running:${color} $running_processes
${color1}NAME         ${alignr 64}PID ${alignr 32}MEM% ${alignr}CPU%
${color5}${top name 1} ${alignr 32}${top pid 1} ${alignr 16}${top mem 1}  ${alignr}${top cpu 1}${color}
${top name 2} ${alignr 32}${top pid 2} ${alignr 16}${top mem 2}  ${alignr}${top cpu 2}
${top name 3} ${alignr 32}${top pid 3} ${alignr 16}${top mem 3}  ${alignr}${top cpu 3}
${top name 4} ${alignr 32}${top pid 4} ${alignr 16}${top mem 4}  ${alignr}${top cpu 4}
${color4}RAM $memperc%, $mem of $memmax / DISK ${fs_free}${alignr}${fs_bar 2,70 /}${color1}
#${color1}swap:${color} $swapperc%  $swap / $swapmax ${alignr}${swapbar 6,164}
${diskiograph_read 25,165} ${alignr}${diskiograph_write 25,165}
${color1}Read: ${color}${diskio_read}${alignc -64}${color1}Write: ${color}${diskio_write}
${color5}${if_match "$gw_iface" == "eth0"}${color5}${endif}${if_existing /proc/net/route eth0}eth0 ${addr eth0}${endif}${color4}${if_match "$gw_iface" == "wlan0"}${color5}${endif}${if_existing /proc/net/route wlan0}wlan0 ${addr wlan0} ${endif}${if_gw}${color5}(${execi 300 wget http://automation.whatismyip.com/n09230945.asp -O - -q})${color4}${endif}${hr 2}${color1}
${if_existing /proc/net/route eth0}eth0 ${addr eth0} Up:${upspeed eth0} Down:${downspeed eth0}${endif}${if_existing /proc/net/route wlan0}wlan0 ${wireless_essid wlan0} Up:${upspeed wlan0}(${totalup wlan0})  Down:${downspeed wlan0}(${totaldown wlan0})${endif}
${if_existing /sys/class/power_supply/BAT1}${color4}BAT1 ${if_existing /sys/class/power_supply/BAT1/manufacturer}${execi 120 cat /sys/class/power_supply/BAT1/manufacturer}/${endif}${if_existing /sys/class/power_supply/BAT1/technology}${execi 120 cat /sys/class/power_supply/BAT1/technology}${endif} ${if_existing /sys/class/power_supply/BAT1/status Discharging}${color2}${endif}${if_existing /sys/class/power_supply/BAT1/status}(${execi 3 cat /sys/class/power_supply/BAT1/status}) ${endif}${color4}${hr 2}${color1}
${if_existing /sys/class/power_supply/BAT1/charge_now}${execi 3 cat /sys/class/power_supply/BAT1/charge_now | sed 's/...$//'}${endif}/${if_existing /sys/class/power_supply/BAT1/charge_full}${execi 120 cat /sys/class/power_supply/BAT1/charge_full | sed 's/...$//'}mAh${endif}${if_existing /sys/class/power_supply/BAT1/charge_full_design} (Factory ${execi 120 cat /sys/class/power_supply/BAT1/charge_full_design | sed 's/...$//'}mAh)${endif} ${if_existing /sys/class/power_supply/BAT1/voltage_now}${execi 3 cat /sys/class/power_supply/BAT1/voltage_now | sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{6\}\)/\1,\2/;ta' | sed 's/...$//'}V${endif}${if_existing /sys/class/power_supply/BAT1/voltage_min_design} (min ${execi 120 cat /sys/class/power_supply/BAT1/voltage_min_design | sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{6\}\)/\1,\2/;ta' | sed 's/...$//'}V)${endif}${endif}
In this config file it is assumed that your wallpaper placed with original proportions.
Also here I tried to automatically detect some things (number of cores, presence of battery, information from sensors) so there is probability that not everything will be seen on other systems/distros/Porteus versions. Please tell me if everything's Ok or if you don't see something.
Especially I'd like to know about CPU temperature(s).
Last edited by Kriss on 12 Mar 2014, 10:39, edited 9 times in total.
Suggestions/corrections/additions are always welcome.

User avatar
Hamza
Warlord
Warlord
Posts: 1846
Joined: 28 Dec 2010, 07:41
Distribution: Porteus
Location: France

Re: conky 1.8.1 + deps

Post#2 by Hamza » 12 Nov 2011, 16:23

Hello,
On the screenshot you can notice numbers after each core (like 59-55 and 57-53), these are from temperature sensors. I didn't understand why there were two temperatures for each core, so just added both of them.
The Actual temperature and Average temperature.

Good Stuff.
NjVFQzY2Rg==

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: conky 1.8.1 + deps

Post#3 by Kriss » 12 Nov 2011, 21:55

Thank you Hamza!
First one is Actual temperature and second one is for Average temperature?

I've reuploaded archive with something a little bit more normal (no /usr/local anymore and more options for WiFi) and will update cofiguration file later (when I'll be satisfied with it myself)
Suggestions/corrections/additions are always welcome.

User avatar
Hamza
Warlord
Warlord
Posts: 1846
Joined: 28 Dec 2010, 07:41
Distribution: Porteus
Location: France

Re: conky 1.8.1 + deps

Post#4 by Hamza » 12 Nov 2011, 22:36

First one is Actual temperature and second one is for Average temperature?
I cannot remember which is the actual temperature and which one is the average.
NjVFQzY2Rg==

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: conky 1.8.1 + deps

Post#5 by Kriss » 13 Dec 2011, 09:59

I'm tinkering with configuration from time to time, here's newer one.
No dependencies needed because I switched from pseudo-transparency to real transparency...

Code: Select all

alignment bottom_right
background yes
border_inner_margin 8
border_width 2
color1 white
# light blue
color2 red
color3 brown
color4 green
color5 pink
color6 yellow
color7 cyan
color8 707070
color9 red
cpu_avg_samples 2
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
draw_borders no
draw_graph_borders no
draw_outline yes
draw_shades yes
#default_shade_color 333333
extra_newline no
# Gap between borders of screen and text
gap_x 5
gap_y 5
maximum_width 235 0
#minimum_size 235 5
net_avg_samples 2
no_buffers no
out_to_console no
out_to_stderr no
#override_utf8_locale yes
own_window yes
own_window_transparent yes
own_window_argb_visual yes
#own_window_argb_value 255
#own_window_argb_130
own_window_type normal
own_window_class conky
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_colour black
show_graph_range yes
show_graph_scale yes
stippled_borders 4
text_buffer_size 2048
update_interval 3.0
uppercase no
short_units yes
#if_up_strictness address
if_up_strictness up
# adds spaces around certain objects to stop them from moving other things around
use_spacer right
#use_xft no
#xftalpha 0.8
#xftfont DejaVu Sans Mono:size=7
#font -misc-fixed-medium-r-semicondensed-*-*-100-*-*-c-*-iso8859-1
#font -misc-fixed-medium-r-semicondensed-*-*-*-*-*-*-*-*
#font -misc-fixed-medium-r-semicondensed-*-*-100-*-*-c-*-utf8


TEXT
$kernel $machine Uptime: $uptime_short
${color4}CPU ${freq_g}GHz X${pre_exec cat /proc/cpuinfo | grep processor | wc -l} ${cpu cpu0}% ${if_match "${pre_exec sensors | grep 'CPU Temperature' -c}">"0"}${execi 3 sensors | grep 'CPU Temperature' | tail +22c | head -2c}°C${alignr}${cpubar cpu0 2,95}${else}${alignr}${cpubar cpu0 2,115}${endif}${color}\
${if_existing /sys/devices/system/cpu/cpu0}
${cpu cpu1}% ${if_match "${pre_exec sensors | grep Core0 -c}">"0"}${execi 3 sensors | grep Core0 | tail +15c | head -2c}°C${alignr}${cpubar cpu1 2,175}${else}${alignr}${cpubar cpu1 2,210}${endif}${endif}\
${if_existing /sys/devices/system/cpu/cpu1}
${cpu cpu2}% ${if_match "${pre_exec sensors | grep Core1 -c}">"0"}${execi 3 sensors | grep Core1 | tail +15c | head -2c}°C${alignr}${cpubar cpu2 2,175}${else}${alignr}${cpubar cpu2 2,210}${endif}${endif}\
${if_existing /sys/devices/system/cpu/cpu2}
${cpu cpu3}% ${if_match "${pre_exec sensors | grep Core2 -c}">"0"}${execi 3 sensors | grep Core2 | tail +15c | head -2c}°C${alignr}${cpubar cpu2 2,175}${else}${alignr}${cpubar cpu3 2,210}${endif}${endif}\
${if_existing /sys/devices/system/cpu/cpu3}
${cpu cpu4}% ${alignr}${cpubar cpu4 2,210}${endif}\
${if_existing /sys/devices/system/cpu/cpu4}
${cpu cpu5}% ${alignr}${cpubar cpu5 2,210}${endif}\
${if_existing /sys/devices/system/cpu/cpu5}
${cpu cpu6}% ${alignr}${cpubar cpu6 2,210}${endif}
#${color1}${cpugraph 000000 ffffff}
\
\
${color1}Processes:${color} $processes  ${alignr}${color1}Running:${color} $running_processes
${color1}NAME         ${alignr 32}PID ${alignr 12}MEM% ${alignr}CPU%${color5}
${top name 1} ${alignr}${top pid 1} ${alignr}${top mem 1} ${alignr}${top cpu 1}${color}
${top name 2} ${alignr}${top pid 2} ${alignr}${top mem 2} ${alignr}${top cpu 2}
${top name 3} ${alignr}${top pid 3} ${alignr}${top mem 3} ${alignr}${top cpu 3}
${top name 4} ${alignr}${top pid 4} ${alignr}${top mem 4} ${alignr}${top cpu 4}
\
\
${color4}RAM $memperc%, $mem/$memmax ${alignr}${membar 2,105}${color1}
#${pre_exec cat /var/log/porteus-livedbg | grep "# Porteus boot device:" -A1 | tail --lines=1} ${fs_free}/${fs_size}${alignr}${fs_bar 2,115}${color1}
#${color1}swap:${color} $swapperc%  $swap / $swapmax ${alignr}${swapbar 6,164}
#${diskiograph_read 25,165} ${alignr}${diskiograph_write 25,165}
HDD ${color1}read: ${color}${diskio_read}${alignc -64}${color1}write: ${color}${diskio_write}
\
\
${color4}${pre_exec echo `lspci -vv | grep 'VGA compatible' -A50 | grep 'Kernel modules' | sed -e 's/.*Kernel modules: //' | sed q`}${hr 2}${color1}
${pre_exec echo `lspci | grep 'VGA compatible' | sed -e 's/.*controller: //' -e 's/Corporation //' -e 's/Technologies Inc //' -e 's/(rev /(/'` `lspci -v | grep 'VGA compatible' -A10 | grep ' prefetchable' | sed -e 's/.*\[size=//' -e 's/\]//'`}
${color4}${if_match "${pre_exec lspci -v | grep Audio -A18 | grep 'Kernel modules' | grep snd-hda-intel -c}">="2"}${pre_exec echo 'snd-hda-intel' \(x`lspci -v | grep Audio -A18 | grep 'Kernel modules' | grep snd-hda-intel -c`\)} ${pre_exec echo `lspci -v | grep Audio -A18 | grep 'Kernel modules' | sed -e 's/.*Kernel modules: //' | grep snd-hda-intel -v`}${else}${pre_exec echo `lspci -v | grep Audio -A18 | grep 'Kernel modules' | sed -e 's/.*Kernel modules: //'`}${endif}${hr 2}${color1}
${pre_exec echo `lspci | grep Audio | sed -e 's/.*device: //' -e 's/Corporation //' -e 's/Technologies Inc //' -e 's/ Audio//' -e 's/ Controller//' -e 's/High Definition/HD/' -e 's/000/k/' -e 's/(rev /(/' | head -1`}${if_match "${pre_exec lspci | grep Audio -c}">"1"}
${pre_exec echo `lspci | grep Audio | sed -e 's/.*device: //' -e 's/Corporation //' -e 's/Technologies Inc //' -e 's/ Audio//' -e 's/ Controller//' -e 's/High Definition/HD/' -e 's/000/k/' -e 's/(rev /(/' | tail -1`}${endif}${if_match "${pre_exec lspci | grep 'Multimedia audio controller' -c}">"0"}
${pre_exec echo `lspci | grep 'Multimedia audio controller' | sed -e 's/.*Multimedia audio controller: //' -e 's/Corporation //' -e 's/Technologies Inc //' -e 's/ Audio//' -e 's/ Controller//' -e 's/High Definition Audio/HDA/' -e 's/(rev /(/' | head -1`}${endif}
\
\
${if_match "${pre_exec ifconfig | grep HWaddr -c}">"0"}${if_up eth0}${color8}${if_existing /proc/net/route eth0}${color1}${if_match "$gw_iface"=="eth0"}${color4}${endif}${endif}eth0 ${endif}${if_up wlan0}${color8}${if_existing /proc/net/route wlan0}${color1}${if_match "$gw_iface"=="wlan0"}${color4}${endif}${endif}wlan0${endif}${color4}${if_gw}${execi 300 wget http://automation.whatismyip.com/n09230945.asp -O - -q}${endif}${hr 2}${color1}
${if_up eth0}${color8}${if_match "$gw_iface"=="eth0"}${color4}${endif}eth0 ${if_existing /proc/net/route eth0}${addrs eth0}${endif}
${pre_exec cat /sys/class/net/eth0/device/uevent | grep 'DRIVER=' | tail +8c} \
${pre_exec lspci -vv | grep `cat /sys/class/net/eth0/device/uevent | grep 'PCI_SLOT_NAME=' | tail +20c` | sed -e 's/.*Ethernet controller: //' -e 's/Technology //' -e 's/Group //' -e 's/Ltd. //' -e 's/Inc. //' -e 's/Corp. //' -e 's/Communications //' -e 's/Semiconductor //' -e 's/Ethernet //' -e 's/Controller //' -e 's/Adapter//' -e 's/(rev /(/'}${endif}${color}${if_existing /proc/net/route eth0}
Up:${upspeed eth0} ${totalup eth0} Down:${downspeed eth0} ${totaldown eth0}${endif}${color}
${if_up wlan0}${color8}${if_match "$gw_iface"=="wlan0"}${color4}${endif}wlan0 ${if_existing /proc/net/route wlan0}${addrs wlan0} ${wireless_essid wlan0} ${wireless_mode wlan0}${endif}
${pre_exec cat /sys/class/net/wlan0/device/uevent | grep 'DRIVER=' | tail +8c} \
${if_match "${pre_exec cat /sys/class/net/wlan0/device/uevent | grep usb_interface -c}">"0"}\
${pre_exec lsusb | grep Wireless | tail +34c | sed -e 's/.*Ethernet controller: //' -e 's/Technology //' -e 's/Group //' -e 's/Ltd. //' -e 's/Inc. //' -e 's/Corp. //' -e 's/Communications //' -e 's/Semiconductor //' -e 's/Fast //' -e 's/Ethernet //' -e 's/Controller //' -e 's/Adapter//' -e 's/(rev /(/'}(USB)${endif}
${pre_exec lspci -vv | grep `cat /sys/class/net/wlan0/device/uevent | grep 'PCI_SLOT_NAME=' | tail +20c` | sed -e 's/.*Ethernet controller: //' -e 's/Technology //' -e 's/Group //' -e 's/Ltd. //' -e 's/Inc. //' -e 's/Corp. //' -e 's/Communications //' -e 's/Semiconductor //' -e 's/Fast //' -e 's/Ethernet //' -e 's/Controller //' -e 's/Adapter//' -e 's/(rev /(/'}${endif}${if_existing /proc/net/route wlan0}
Up:${upspeed wlan0} ${totalup wlan0} Down:${downspeed wlan0} ${totaldown wlan0}${endif}${color}
\
\
${if_existing /sys/class/power_supply/BAT0}${color4}BAT0 ${if_existing /sys/class/power_supply/BAT0/manufacturer}${pre_exec cat /sys/class/power_supply/BAT0/manufacturer}/${endif}${if_existing /sys/class/power_supply/BAT0/technology}${pre_exec cat /sys/class/power_supply/BAT0/technology}${endif}${if_existing /sys/class/power_supply/BAT0/charge_full_design} ${pre_exec cat /sys/class/power_supply/BAT0/charge_full_design | head -c -4}mAh${endif} ${if_existing /sys/class/power_supply/BAT0/status Discharging}${color2}${endif}${if_existing /sys/class/power_supply/BAT0/status}(${execi 6 cat /sys/class/power_supply/BAT0/status})${endif}${color4}${hr 2}${color1}
${if_existing /sys/class/power_supply/BAT0/charge_now}${execi 6 cat /sys/class/power_supply/BAT0/charge_now | head -c -4}${endif}/${if_existing /sys/class/power_supply/BAT0/charge_full}${pre_exec cat /sys/class/power_supply/BAT0/charge_full | head -c -4 }mAh${endif} ${if_existing /sys/class/power_supply/BAT0/voltage_now}${execi 6 cat /sys/class/power_supply/BAT0/voltage_now | sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{6\}\)/\1,\2/;ta' -e 's/...$//'}V${endif}${if_existing /sys/class/power_supply/BAT0/voltage_min_design} (min ${pre_exec cat /sys/class/power_supply/BAT0/voltage_min_design | sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{6\}\)/\1,\2/;ta' -e 's/...$//'}V)${endif}${endif}\
\
${if_existing /sys/class/power_supply/BAT1}${color4}BAT1 ${if_existing /sys/class/power_supply/BAT1/manufacturer}${pre_exec cat /sys/class/power_supply/BAT1/manufacturer}/${endif}${if_existing /sys/class/power_supply/BAT1/technology}${pre_exec cat /sys/class/power_supply/BAT1/technology}${endif}${if_existing /sys/class/power_supply/BAT1/charge_full_design} ${pre_exec cat /sys/class/power_supply/BAT1/charge_full_design | head -c -4}mAh${endif} ${if_existing /sys/class/power_supply/BAT1/status Discharging}${color2}${endif}${if_existing /sys/class/power_supply/BAT1/status}(${execi 6 cat /sys/class/power_supply/BAT1/status})${endif}${color4}${hr 2}${color1}
${if_existing /sys/class/power_supply/BAT1/charge_now}${execi 6 cat /sys/class/power_supply/BAT1/charge_now | head -c -4}${endif}/${if_existing /sys/class/power_supply/BAT1/charge_full}${pre_exec cat /sys/class/power_supply/BAT1/charge_full | head -c -4 }mAh${endif} ${if_existing /sys/class/power_supply/BAT1/voltage_now}${execi 6 cat /sys/class/power_supply/BAT1/voltage_now | sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{6\}\)/\1,\2/;ta' -e 's/...$//'}V${endif}${if_existing /sys/class/power_supply/BAT1/voltage_min_design} (min ${pre_exec cat /sys/class/power_supply/BAT1/voltage_min_design | sed -e :a -e 's/\(.*[0-9]\)\([0-9]\{6\}\)/\1,\2/;ta' -e 's/...$//'}V)${endif}${endif}


${alignr}
Detects (can tweak it if anyone wants something):
number of cpu cores,
CPU temperature sensor.
AMD k8temp sensors for first 2 cores
wlan0, eth0 and their state, IP, Wlan mode and network
1 VGA card + loaded kernel modules (video memory value is broken, don't know where to look for it)
2-3 Sound cards + loaded kernel modules
Batteries BAT0 and BAT1 (useful for notebooks), their state, voltage, charge in mAh and some generic info

Screenshot

P.S. Excuse me for big image, I was in hurry. I'll add screenshot rom notebook soon.
Last edited by Kriss on 13 Dec 2011, 18:52, edited 1 time in total.
Suggestions/corrections/additions are always welcome.

User avatar
Hamza
Warlord
Warlord
Posts: 1846
Joined: 28 Dec 2010, 07:41
Distribution: Porteus
Location: France

Re: conky 1.8.1 + deps

Post#6 by Hamza » 13 Dec 2011, 16:11

Hmm..There is a parameter in rc file about desktop position..Really sorry I can't remember. please make a diff and try to find out a parameter with keyword : top / right / absolute /
NjVFQzY2Rg==

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: conky 1.8.1 + deps

Post#7 by Kriss » 13 Dec 2011, 18:45

@Hamza
Sorry I can't understand what you wanted to say...
There's parameter "alignment" at the top of configuration file.
Text alignment on screen, {top,bottom,middle}_{left,right,middle} or none. Can also be abbreviated with first chars of position, ie. tr for top_right.
Aligned position on screen, may be top_left, top_right, top_middle, bottom_left, bottom_right, bottom_middle, middle_left, middle_middle, middle_right, or none (also can be abreviated as tl, tr, tm, bl, br, bm, ml, mm, mr). See also gap_x and gap_y.
In my case it's "bottom_right".
Suggestions/corrections/additions are always welcome.

User avatar
Hamza
Warlord
Warlord
Posts: 1846
Joined: 28 Dec 2010, 07:41
Distribution: Porteus
Location: France

Re: conky 1.8.1 + deps

Post#8 by Hamza » 13 Dec 2011, 18:59

So, you need to replace it by top_right to place it on top right of your screen.
NjVFQzY2Rg==

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: conky 1.8.1 + deps

Post#9 by Kriss » 14 Dec 2011, 01:57

Yes.

Code: Select all

alignment top_right
Suggestions/corrections/additions are always welcome.

User avatar
Hamza
Warlord
Warlord
Posts: 1846
Joined: 28 Dec 2010, 07:41
Distribution: Porteus
Location: France

Re: conky 1.8.1 + deps

Post#10 by Hamza » 14 Dec 2011, 17:08

Let us know if this worked and solved your problem.
NjVFQzY2Rg==

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: conky 1.8.1 + deps

Post#11 by Kriss » 15 Dec 2011, 05:57

Err... I had no problems.
I updated this topic to post newer (better in my opinion) configuration file.
Suggestions/corrections/additions are always welcome.

lukaluki
Black ninja
Black ninja
Posts: 66
Joined: 08 Dec 2011, 01:01
Location: asdfw

Re: conky 1.8.1 + deps

Post#12 by lukaluki » 01 Jan 2012, 23:06

It seems the conky file on mediafire has been deleted :(
could you please reupload it? would be so great!

thank you!

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: conky 1.8.1 + deps

Post#13 by Kriss » 12 Apr 2012, 08:30

Sorry, was absent for a long time.
And didn't find a way to upload files there (if somebody know how to do it with their new interface, please tell me) so i uploaded conky-1.8.1-2.xzm to depositfiles.com
http://depositfiles.com/files/fbbfgvetq
Suggestions/corrections/additions are always welcome.

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: conky

Post#14 by Kriss » 12 Mar 2014, 10:36

Update...
Suggestions/corrections/additions are always welcome.

Post Reply