Nemesis Mate

Arch based Porteus community project
Jack
Contributor
Contributor
Posts: 1187
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Nemesis Mate

Post#1 by Jack » 18 Dec 2016, 22:00

FIRST OFF I'M NOT GOOD ON HOW I DID IT AND HOPE YOU UNDERSTAND THIS.

I'm trying to build a Mate version of Nemesis.

I use ncmprhnsbl modules of Nemesis update from here viewtopic.php?f=138&t=6484 and his updates works great.

After I booted up in Terminal mode I did this.

Code: Select all

setup-pman
After that I ran this scuipt from francois.

Code: Select all

pman -S mate > /tmp/message-mate.txt
But now when it boots up in a Terminal window after I type root/toor so I type startx then It runs a graphic window.

How can I get it to run or start Mate auto?

The file size it made was 135.6 MB for my version Mate. Once I get it to start I will work on Mate-extra.

Here is the output of the build.

Code: Select all

:: There are 14 members in group mate:
:: Repository community
   1) caja  2) marco  3) mate-backgrounds  4) mate-control-center  5) mate-desktop  6) mate-icon-theme  7) mate-menus  8) mate-notification-daemon  9) mate-panel  10) mate-polkit  11) mate-session-manager  12) mate-settings-daemon  13) mate-themes  14) mate-user-guide
resolving dependencies...
looking for conflicting packages...

Packages (52) adwaita-icon-theme-3.22.0-1  aspell-0.60.6.1-5  dconf-0.26.0-2  enchant-1.6.0-10  exempi-2.3.0-1  gcr-3.20.0+11+g8322f27-1  geoclue2-2.4.4-2  gst-plugins-base-libs-1.10.2-1  gstreamer-1.10.2-1  gtk3-3.22.5-1  gvfs-1.30.2+11+g7435ecc-1  harfbuzz-icu-1.3.4-1  hspell-1.3-1  hunspell-1.5.4-1  hyphen-2.8.8-1  iso-codes-3.70-1  json-glib-1.2.2+4+gd725fb5-1  libcanberra-0.30-7  libgtop-2.34.1-1  libmatekbd-1.16.0-1  libmatemixer-1.16.0-1  libmateweather-1.16.1-1  libnotify-0.7.7-1  libvoikko-4.0.2-1  libwnck3-3.20.1-1  libxklavier-5.4-1  libxslt-1.1.29+23+geb1030d-1  libxss-1.2.2-2  mate-desktop-schemas-1.16.1-1  scrnsaverproto-1.2.2-2  sound-theme-freedesktop-0.8-2  tdb-1.3.11-1  udisks2-2.1.8-1  wayland-protocols-1.7-1  webkit2gtk-2.14.2-2  yelp-3.22.0+1+gfabd8eb-1  yelp-xsl-3.20.1-2  zenity-3.22.0+1+gcd1647c-1  caja-1.16.1-1  marco-1.16.0-2  mate-backgrounds-1.16.0-1  mate-control-center-1.16.0-1  mate-desktop-1.16.1-1  mate-icon-theme-1.16.0-1  mate-menus-1.16.0-1  mate-notification-daemon-1.16.1-1  mate-panel-1.16.0-1  mate-polkit-1.16.0-1  mate-session-manager-1.16.0-2  mate-settings-daemon-1.16.0-1  mate-themes-3.22.4-1  mate-user-guide-1.16.0-1

Total Download Size:   124.28 MiB
Total Installed Size:  428.41 MiB

:: Retrieving packages...
downloading exempi-2.3.0-1-x86_64.pkg.tar.xz...
downloading dconf-0.26.0-2-x86_64.pkg.tar.xz...
downloading udisks2-2.1.8-1-x86_64.pkg.tar.xz...
downloading adwaita-icon-theme-3.22.0-1-any.pkg.tar.xz...
downloading json-glib-1.2.2+4+gd725fb5-1-x86_64.pkg.tar.xz...
downloading wayland-protocols-1.7-1-any.pkg.tar.xz...
downloading gtk3-3.22.5-1-x86_64.pkg.tar.xz...
downloading gcr-3.20.0+11+g8322f27-1-x86_64.pkg.tar.xz...
downloading gvfs-1.30.2+11+g7435ecc-1-x86_64.pkg.tar.xz...
downloading tdb-1.3.11-1-x86_64.pkg.tar.xz...
downloading sound-theme-freedesktop-0.8-2-any.pkg.tar.xz...
downloading libcanberra-0.30-7-x86_64.pkg.tar.xz...
downloading libgtop-2.34.1-1-x86_64.pkg.tar.xz...
downloading libxslt-1.1.29+23+geb1030d-1-x86_64.pkg.tar.xz...
downloading aspell-0.60.6.1-5-x86_64.pkg.tar.xz...
downloading hunspell-1.5.4-1-x86_64.pkg.tar.xz...
downloading hspell-1.3-1-x86_64.pkg.tar.xz...
downloading libvoikko-4.0.2-1-x86_64.pkg.tar.xz...
downloading enchant-1.6.0-10-x86_64.pkg.tar.xz...
downloading geoclue2-2.4.4-2-x86_64.pkg.tar.xz...
downloading gstreamer-1.10.2-1-x86_64.pkg.tar.xz...
downloading gst-plugins-base-libs-1.10.2-1-x86_64.pkg.tar.xz...
downloading harfbuzz-icu-1.3.4-1-x86_64.pkg.tar.xz...
downloading libnotify-0.7.7-1-x86_64.pkg.tar.xz...
downloading hyphen-2.8.8-1-x86_64.pkg.tar.xz...
downloading webkit2gtk-2.14.2-2-x86_64.pkg.tar.xz...
downloading zenity-3.22.0+1+gcd1647c-1-x86_64.pkg.tar.xz...
downloading iso-codes-3.70-1-any.pkg.tar.xz...
downloading libxklavier-5.4-1-x86_64.pkg.tar.xz...
downloading scrnsaverproto-1.2.2-2-any.pkg.tar.xz...
downloading libxss-1.2.2-2-x86_64.pkg.tar.xz...
downloading libwnck3-3.20.1-1-x86_64.pkg.tar.xz...
downloading yelp-xsl-3.20.1-2-any.pkg.tar.xz...
downloading yelp-3.22.0+1+gfabd8eb-1-x86_64.pkg.tar.xz...
downloading mate-desktop-schemas-1.16.1-1-x86_64.pkg.tar.xz...
downloading mate-desktop-1.16.1-1-x86_64.pkg.tar.xz...
downloading caja-1.16.1-1-x86_64.pkg.tar.xz...
downloading marco-1.16.0-2-x86_64.pkg.tar.xz...
downloading mate-backgrounds-1.16.0-1-any.pkg.tar.xz...
downloading mate-menus-1.16.0-1-x86_64.pkg.tar.xz...
downloading libmatekbd-1.16.0-1-x86_64.pkg.tar.xz...
downloading libmatemixer-1.16.0-1-x86_64.pkg.tar.xz...
downloading mate-settings-daemon-1.16.0-1-x86_64.pkg.tar.xz...
downloading mate-control-center-1.16.0-1-x86_64.pkg.tar.xz...
downloading mate-icon-theme-1.16.0-1-any.pkg.tar.xz...
downloading mate-notification-daemon-1.16.1-1-x86_64.pkg.tar.xz...
downloading libmateweather-1.16.1-1-x86_64.pkg.tar.xz...
downloading mate-panel-1.16.0-1-x86_64.pkg.tar.xz...
downloading mate-polkit-1.16.0-1-x86_64.pkg.tar.xz...
downloading mate-session-manager-1.16.0-2-x86_64.pkg.tar.xz...
downloading mate-themes-3.22.4-1-any.pkg.tar.xz...
downloading mate-user-guide-1.16.0-1-any.pkg.tar.xz...
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
checking available disk space...
:: Processing package changes...
installing exempi...
installing dconf...
installing udisks2...
Optional dependencies for udisks2
    parted: partition management [installed]
    gptfdisk: GUID partition table support [installed]
    ntfs-3g: NTFS filesystem management support [installed]
    dosfstools: VFAT filesystem management support [installed]
installing adwaita-icon-theme...
installing json-glib...
installing wayland-protocols...
installing gtk3...
Optional dependencies for gtk3
    libcanberra: gtk3-widget-factory demo [pending]
    gtk3-print-backends: Printing
installing gcr...
installing gvfs...
Optional dependencies for gvfs
    gvfs-afc: AFC (mobile devices) support
    gvfs-smb: SMB/CIFS (Windows client) support
    gvfs-gphoto2: gphoto2 (PTP camera/MTP media player) support
    gvfs-mtp: MTP device support
    gvfs-goa: gnome-online-accounts (e.g. OwnCloud) support
    gvfs-nfs: NFS support
    gvfs-google: Google Drive support
    gtk3: Recent files support [installed]
installing mate-desktop-schemas...
installing mate-desktop...
installing caja...
Optional dependencies for caja
    gstreamer: automatic media playback when mouseover [pending]
installing tdb...
Optional dependencies for tdb
    python2: for python bindings
installing sound-theme-freedesktop...
installing libcanberra...
Optional dependencies for libcanberra
    libcanberra-pulse: PulseAudio driver
    libcanberra-gstreamer: GStreamer driver
installing libgtop...
installing libxslt...
installing aspell...
Optional dependencies for aspell
    perl: to import old dictionaries [installed]
installing hunspell...
Optional dependencies for hunspell
    perl: for ispellaff2myspell [installed]
installing hspell...
installing libvoikko...
installing enchant...
installing geoclue2...
Optional dependencies for geoclue2
    geoip: geoip-lookup server binary
installing gstreamer...
installing gst-plugins-base-libs...
installing harfbuzz-icu...
installing libnotify...
installing hyphen...
installing webkit2gtk...
Optional dependencies for webkit2gtk
    gtk2: Netscape plugin support [installed]
    gst-plugins-base: free media decoding
    gst-plugins-good: media decoding
    gst-libav: nonfree media decoding
installing zenity...
installing marco...
installing mate-backgrounds...
installing mate-menus...
Optional dependencies for mate-menus
    python2: python2 bindings
installing iso-codes...
installing libxklavier...
installing libmatekbd...
installing libmatemixer...
installing mate-settings-daemon...
Optional dependencies for mate-settings-daemon
    libcanberra-pulse: PulseAudio support
    pulseaudio-alsa: PulseAudio support
installing scrnsaverproto...
installing libxss...
installing mate-control-center...
installing mate-icon-theme...
installing libwnck3...
installing mate-notification-daemon...
installing libmateweather...
installing mate-panel...
installing mate-polkit...
installing mate-session-manager...
Optional dependencies for mate-session-manager
    gnome-keyring: keyring support
    xdg-user-dirs-gtk: manage user directories
installing mate-themes...
Optional dependencies for mate-themes
    gtk-engines: for gtk2 themes
    gtk-engine-murrine: for gtk2 themes
    mate-icon-theme: default icon theme [installed]
installing yelp-xsl...
installing yelp...
installing mate-user-guide...
:: Running post-transaction hooks...
(1/8) Updating GIO module cache...
(2/8) Compiling GSettings XML schema files...
(3/8) Probing GTK3 input method modules...
(4/8) Updating icon theme caches...
(5/8) Reloading GVFS config...
(6/8) Updating the info directory file...
(7/8) Updating the desktop file MIME type cache...
(8/8) Updating the MIME type database...

[1m[36m Multiple packages were detected. [m

[1m[32m Decompressing adwaita-icon-theme-3.22.0-1-any.pkg.tar.xz [m
[1m[32m Stripping adwaita-icon-theme-3.22.0-1-any.pkg.tar.xz [m

[1m Size before strip: [m
 42M
[1m Size after strip: [m
 41M

[1m[32m Decompressing aspell-0.60.6.1-5-x86_64.pkg.tar.xz [m
[1m[32m Stripping aspell-0.60.6.1-5-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 45M
[1m Size after strip: [m
 44M

[1m[32m Decompressing caja-1.16.1-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping caja-1.16.1-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 62M
[1m Size after strip: [m
 61M

[1m[32m Decompressing dconf-0.26.0-2-x86_64.pkg.tar.xz [m
[1m[32m Stripping dconf-0.26.0-2-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 62M
[1m Size after strip: [m
 62M

[1m[32m Decompressing enchant-1.6.0-10-x86_64.pkg.tar.xz [m
[1m[32m Stripping enchant-1.6.0-10-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 62M
[1m Size after strip: [m
 62M

[1m[32m Decompressing exempi-2.3.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping exempi-2.3.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 63M
[1m Size after strip: [m
 63M

[1m[32m Decompressing gcr-3.20.0+11+g8322f27-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping gcr-3.20.0+11+g8322f27-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 69M
[1m Size after strip: [m
 67M

[1m[32m Decompressing geoclue2-2.4.4-2-x86_64.pkg.tar.xz [m
[1m[32m Stripping geoclue2-2.4.4-2-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 68M
[1m Size after strip: [m
 67M

[1m[32m Decompressing gst-plugins-base-libs-1.10.2-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping gst-plugins-base-libs-1.10.2-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 81M
[1m Size after strip: [m
 74M

[1m[32m Decompressing gstreamer-1.10.2-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping gstreamer-1.10.2-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 91M
[1m Size after strip: [m
 81M

[1m[32m Decompressing gtk3-3.22.5-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping gtk3-3.22.5-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 153M
[1m Size after strip: [m
 125M

[1m[32m Decompressing gvfs-1.30.2+11+g7435ecc-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping gvfs-1.30.2+11+g7435ecc-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 131M
[1m Size after strip: [m
 131M

[1m[32m Decompressing harfbuzz-icu-1.3.4-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping harfbuzz-icu-1.3.4-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 131M
[1m Size after strip: [m
 131M

[1m[32m Decompressing hspell-1.3-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping hspell-1.3-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 132M
[1m Size after strip: [m
 132M

[1m[32m Decompressing hunspell-1.5.4-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping hunspell-1.5.4-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 133M
[1m Size after strip: [m
 133M

[1m[32m Decompressing hyphen-2.8.8-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping hyphen-2.8.8-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 133M
[1m Size after strip: [m
 133M

[1m[32m Decompressing iso-codes-3.70-1-any.pkg.tar.xz [m
[1m[32m Stripping iso-codes-3.70-1-any.pkg.tar.xz [m

[1m Size before strip: [m
 150M
[1m Size after strip: [m
 150M

[1m[32m Decompressing json-glib-1.2.2+4+gd725fb5-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping json-glib-1.2.2+4+gd725fb5-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 152M
[1m Size after strip: [m
 151M

[1m[32m Decompressing libcanberra-0.30-7-x86_64.pkg.tar.xz [m
[1m[32m Stripping libcanberra-0.30-7-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 151M
[1m Size after strip: [m
 151M

[1m[32m Decompressing libgtop-2.34.1-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libgtop-2.34.1-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 152M
[1m Size after strip: [m
 152M

[1m[32m Decompressing libmatekbd-1.16.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libmatekbd-1.16.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 153M
[1m Size after strip: [m
 153M

[1m[32m Decompressing libmatemixer-1.16.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libmatemixer-1.16.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 154M
[1m Size after strip: [m
 153M

[1m[32m Decompressing libmateweather-1.16.1-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libmateweather-1.16.1-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 173M
[1m Size after strip: [m
 173M

[1m[32m Decompressing libnotify-0.7.7-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libnotify-0.7.7-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 173M
[1m Size after strip: [m
 173M

[1m[32m Decompressing libvoikko-4.0.2-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libvoikko-4.0.2-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 173M
[1m Size after strip: [m
 173M

[1m[32m Decompressing libwnck3-3.20.1-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libwnck3-3.20.1-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 177M
[1m Size after strip: [m
 176M

[1m[32m Decompressing libxklavier-5.4-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libxklavier-5.4-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 176M
[1m Size after strip: [m
 176M

[1m[32m Decompressing libxslt-1.1.29+23+geb1030d-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping libxslt-1.1.29+23+geb1030d-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 179M
[1m Size after strip: [m
 177M

[1m[32m Decompressing libxss-1.2.2-2-x86_64.pkg.tar.xz [m
[1m[32m Stripping libxss-1.2.2-2-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 177M
[1m Size after strip: [m
 177M

[1m[32m Decompressing marco-1.16.0-2-x86_64.pkg.tar.xz [m
[1m[32m Stripping marco-1.16.0-2-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 182M
[1m Size after strip: [m
 182M

[1m[32m Decompressing mate-backgrounds-1.16.0-1-any.pkg.tar.xz [m
[1m[32m Stripping mate-backgrounds-1.16.0-1-any.pkg.tar.xz [m

[1m Size before strip: [m
 203M
[1m Size after strip: [m
 203M

[1m[32m Decompressing mate-control-center-1.16.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-control-center-1.16.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 212M
[1m Size after strip: [m
 211M

[1m[32m Decompressing mate-desktop-1.16.1-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-desktop-1.16.1-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 215M
[1m Size after strip: [m
 214M

[1m[32m Decompressing mate-desktop-schemas-1.16.1-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-desktop-schemas-1.16.1-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 214M
[1m Size after strip: [m
 214M

[1m[32m Decompressing mate-icon-theme-1.16.0-1-any.pkg.tar.xz [m
[1m[32m Stripping mate-icon-theme-1.16.0-1-any.pkg.tar.xz [m

[1m Size before strip: [m
 240M
[1m Size after strip: [m
 239M

[1m[32m Decompressing mate-menus-1.16.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-menus-1.16.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 240M
[1m Size after strip: [m
 240M

[1m[32m Decompressing mate-notification-daemon-1.16.1-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-notification-daemon-1.16.1-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 241M
[1m Size after strip: [m
 241M

[1m[32m Decompressing mate-panel-1.16.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-panel-1.16.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 251M
[1m Size after strip: [m
 251M

[1m[32m Decompressing mate-polkit-1.16.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-polkit-1.16.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 251M
[1m Size after strip: [m
 251M

[1m[32m Decompressing mate-session-manager-1.16.0-2-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-session-manager-1.16.0-2-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 253M
[1m Size after strip: [m
 253M

[1m[32m Decompressing mate-settings-daemon-1.16.0-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping mate-settings-daemon-1.16.0-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 256M
[1m Size after strip: [m
 256M

[1m[32m Decompressing mate-themes-3.22.4-1-any.pkg.tar.xz [m
[1m[32m Stripping mate-themes-3.22.4-1-any.pkg.tar.xz [m

[1m Size before strip: [m
 286M
[1m Size after strip: [m
 286M

[1m[32m Decompressing mate-user-guide-1.16.0-1-any.pkg.tar.xz [m
[1m[32m Stripping mate-user-guide-1.16.0-1-any.pkg.tar.xz [m

[1m Size before strip: [m
 310M
[1m Size after strip: [m
 310M

[1m[32m Decompressing scrnsaverproto-1.2.2-2-any.pkg.tar.xz [m
[1m[32m Stripping scrnsaverproto-1.2.2-2-any.pkg.tar.xz [m

[1m Size before strip: [m
 310M
[1m Size after strip: [m
 310M

[1m[32m Decompressing sound-theme-freedesktop-0.8-2-any.pkg.tar.xz [m
[1m[32m Stripping sound-theme-freedesktop-0.8-2-any.pkg.tar.xz [m

[1m Size before strip: [m
 310M
[1m Size after strip: [m
 310M

[1m[32m Decompressing tdb-1.3.11-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping tdb-1.3.11-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 310M
[1m Size after strip: [m
 310M

[1m[32m Decompressing udisks2-2.1.8-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping udisks2-2.1.8-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 319M
[1m Size after strip: [m
 314M

[1m[32m Decompressing wayland-protocols-1.7-1-any.pkg.tar.xz [m
[1m[32m Stripping wayland-protocols-1.7-1-any.pkg.tar.xz [m

[1m Size before strip: [m
 314M
[1m Size after strip: [m
 314M

[1m[32m Decompressing webkit2gtk-2.14.2-2-x86_64.pkg.tar.xz [m
[1m[32m Stripping webkit2gtk-2.14.2-2-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 417M
[1m Size after strip: [m
 410M

[1m[32m Decompressing yelp-3.22.0+1+gfabd8eb-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping yelp-3.22.0+1+gfabd8eb-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 413M
[1m Size after strip: [m
 413M

[1m[32m Decompressing yelp-xsl-3.20.1-2-any.pkg.tar.xz [m
[1m[32m Stripping yelp-xsl-3.20.1-2-any.pkg.tar.xz [m

[1m Size before strip: [m
 415M
[1m Size after strip: [m
 415M

[1m[32m Decompressing zenity-3.22.0+1+gcd1647c-1-x86_64.pkg.tar.xz [m
[1m[32m Stripping zenity-3.22.0+1+gcd1647c-1-x86_64.pkg.tar.xz [m

[1m Size before strip: [m
 422M
[1m Size after strip: [m
 422M

/tmp
Parallel mksquashfs: Using 2 processors
Creating 4.0 filesystem on /tmp/003-mate, block size 262144.

[===========================================================/] 21178/21178 100%

Exportable Squashfs 4.0 filesystem, xz compressed, data block size 262144
	compressed data, compressed metadata, compressed fragments, compressed xattrs
	duplicates are removed
Filesystem size 132444.61 Kbytes (129.34 Mbytes)
	34.90% of uncompressed filesystem size (379452.49 Kbytes)
Inode table size 223000 bytes (217.77 Kbytes)
	21.40% of uncompressed inode table size (1041896 bytes)
Directory table size 266428 bytes (260.18 Kbytes)
	32.05% of uncompressed directory table size (831318 bytes)
Number of duplicate files found 3865
Number of inodes 28149
Number of files 20531
Number of fragments 863
Number of symbolic links  6230
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 1388
Number of ids (unique uids + gids) 2
Number of uids 1
	root (0)
Number of gids 2
	root (0)
	polkitd (102)

130M	/tmp/003-mate

[1m[31m ERROR: Module directory is not mounted or unwritable. [m
Please manually copy the modules to your module directory.

[1m[32m Your modules are in the /tmp folder: [m
003-mate

Packages were removed from /var/cache/pacman/pkg.
Last edited by Jack on 19 Dec 2016, 17:39, edited 1 time in total.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
francois
Contributor
Contributor
Posts: 5080
Joined: 28 Dec 2010, 14:25
Distribution: kde xfce porteus manjaro kubun
Location: Enfin l'été, le changement climatique attendu: le soleil.

Re: Nemesis Mate

Post#2 by francois » 18 Dec 2016, 23:00

Voltaire: Le mieux est l'ennemi du bien.

Jack
Contributor
Contributor
Posts: 1187
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Nemesis Mate

Post#3 by Jack » 18 Dec 2016, 23:26

I first type mate session and didn't work. Then I try exec mate-session and it didn't work. Both went into a Graphic mode window.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
Blaze
DEV Team
DEV Team
Posts: 1501
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Nemesis Mate

Post#4 by Blaze » 19 Dec 2016, 07:54

Jack, probably need to install slim

Code: Select all

pacman -S slim
I think you can ignore this step.

Try without slim:

Code: Select all

echo "exec mate-session" > ~/.xinitrc
startx
It's must to solve this issue.
Linux porteus 4.13.3-porteus #1 SMP PREEMPT Sat Sep 23 18:22:13 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
francois
Contributor
Contributor
Posts: 5080
Joined: 28 Dec 2010, 14:25
Distribution: kde xfce porteus manjaro kubun
Location: Enfin l'été, le changement climatique attendu: le soleil.

Re: Nemesis Mate

Post#5 by francois » 19 Dec 2016, 13:47

Make sure you have the xorg-xinit package.

Code: Select all

pman -S xorg-xinit
Voltaire: Le mieux est l'ennemi du bien.

Jack
Contributor
Contributor
Posts: 1187
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Nemesis Mate

Post#6 by Jack » 19 Dec 2016, 15:39

Blaze wrote:Jack, probably need to install slim

Code: Select all

pacman -S slim
I think you can ignore this step.
This is the only one that ran Mate but it would not let me to login. I try guest/guest and root/toor as far as username and password.
Try without slim:

Code: Select all

echo "exec mate-session" > ~/.xinitrc
startx
It's must to solve this issue.
It started to run but went back to terminal.

I even install this and rerun Blaze what show or told me to do.
francois wrote:Make sure you have the xorg-xinit package.

Code: Select all

pman -S xorg-xinit
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
Blaze
DEV Team
DEV Team
Posts: 1501
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Nemesis Mate

Post#7 by Blaze » 19 Dec 2016, 17:19

Jack, record all your steps via command

Code: Select all

script /sdaX/script-name.txt
or better share your 003-mate.xzm
Linux porteus 4.13.3-porteus #1 SMP PREEMPT Sat Sep 23 18:22:13 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

Jack
Contributor
Contributor
Posts: 1187
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Nemesis Mate

Post#8 by Jack » 19 Dec 2016, 17:50

Here is a link to my 003-mate.xzm. I hope you can fine out what is wrong.
http://www.mediafire.com/file/fpb36803f ... 3-mate.xzm

Thanks Blaze.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
ncmprhnsbl
DEV Team
DEV Team
Posts: 973
Joined: 20 Mar 2012, 03:42
Distribution: 3.2.2-64bit xfce/openbox
Location: australia
Contact:

Re: Nemesis Mate

Post#9 by ncmprhnsbl » 19 Dec 2016, 19:47

you probly need to run: (as root)

Code: Select all

update-cache
before starting X, this will update varoius caches and ask if you want a module: answer yes(y)
i think it turns up in /tmp, if so move it to /modules, then if alls well, merge it into 003-mate (copy the extracted caches module to extracted mate, recompress)
Forum Rules : http://forum.porteus.org/viewtopic.php?f=35&t=44

Jack
Contributor
Contributor
Posts: 1187
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Nemesis Mate

Post#10 by Jack » 19 Dec 2016, 20:25

ncmprhnsbl wrote:you probly need to run: (as root)

Code: Select all

update-cache
before starting X, this will update varoius caches and ask if you want a module: answer yes(y)
i think it turns up in /tmp, if so move it to /modules, then if alls well, merge it into 003-mate (copy the extracted caches module to extracted mate, recompress)
Is that after what Blaze and francois told me what to do?
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
ncmprhnsbl
DEV Team
DEV Team
Posts: 973
Joined: 20 Mar 2012, 03:42
Distribution: 3.2.2-64bit xfce/openbox
Location: australia
Contact:

Re: Nemesis Mate

Post#11 by ncmprhnsbl » 19 Dec 2016, 20:41

Jack wrote:Is that after what Blaze and francois told me what to do?
as well as,
after probly... just, before starting X..
Forum Rules : http://forum.porteus.org/viewtopic.php?f=35&t=44

Jack
Contributor
Contributor
Posts: 1187
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Nemesis Mate

Post#12 by Jack » 19 Dec 2016, 21:41

After I did what Blaze said to do. Which was this.

Code: Select all

echo "exec mate-session" > ~/.xinitrc
After I did what francois said to do. Which was this.

Code: Select all

pman -S xorg-xinit
And then what ncmprhnsbl said to do. Which was this.

Code: Select all

update-cache
And then I did this.

Code: Select all

startx
Mate started up. Then I rebooted in Graphic mode then all I had was 3 Graphics windows.

It must be missing something somewhere but I don't know what.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
ncmprhnsbl
DEV Team
DEV Team
Posts: 973
Joined: 20 Mar 2012, 03:42
Distribution: 3.2.2-64bit xfce/openbox
Location: australia
Contact:

Re: Nemesis Mate

Post#13 by ncmprhnsbl » 19 Dec 2016, 22:34

Jack wrote:Then I rebooted in Graphic mode then all I had was 3 Graphics windows.
not sure what you mean ... is this openbox with an xterm?
did you... copy /home/guest/.xinitrc into your mate module?
i wonder if it might better to put it as xinitrc in /etc/X11/xinit, so as to overlay the existing one in 002-gui that says "exec openbox-session"..
Forum Rules : http://forum.porteus.org/viewtopic.php?f=35&t=44

Jack
Contributor
Contributor
Posts: 1187
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Nemesis Mate

Post#14 by Jack » 19 Dec 2016, 22:50

Here what I mean in red.

not sure what you mean ... is this openbox with an xterm? xterm
did you... copy /home/guest/.xinitrc into your mate module?
no not sure how to do it.
i wonder if it might better to put it as xinitrc in /etc/X11/xinit, so as to overlay the existing one in 002-gui that says "exec openbox-session"..
I don't know.

I'm not smart enough for all of this and wish I haven't even did it. I would let all other the other member do it and I would use it.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
francois
Contributor
Contributor
Posts: 5080
Joined: 28 Dec 2010, 14:25
Distribution: kde xfce porteus manjaro kubun
Location: Enfin l'été, le changement climatique attendu: le soleil.

Re: Nemesis Mate

Post#15 by francois » 20 Dec 2016, 01:15

@jack:
We will troubleshoot you. This sometimes is fast, sometimes slow.

Don't try more than 5 times, stop after half an hour and take some fresh air. Watch for the icy patches outdoor. :wink:
Voltaire: Le mieux est l'ennemi du bien.

Post Reply