Porteus 3.1 no termina de cargar en portatil antiguo

Hola!
Post Reply
txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Porteus 3.1 no termina de cargar en portatil antiguo

Post#1 by txema75 » 29 Oct 2016, 14:31

Buenas de nuevo
Estoy intentando rescatar un viejo portatil Acer aspire 3503 wlmi (intel celeron a 1,5 Ghz, 1 Gb de Ram, gráfica integrada), una caquilla, pero que en su día me hacía su servicio y a día de hoy con win XP va lentísimo. :oops:
El caso que le meto un live de porteus KDE 32 bits, y no termina de cargar la interfaz gráfica, se queda el icono del ratón girando sobre la pantalla en negro y me toca darle botonazo. Con el escritorio LQXt me pasa lo mismo :cry:

En otras lives que he llegado a probar, le tengo que añadir nomodeset a los parámetros de inicio y arranca, pero no se ve demasiado bien

No sé que puede pasar con porteus :(

Un saludo y gracias de antemano :)
Last edited by txema75 on 21 Nov 2016, 12:14, edited 1 time in total.

port
Samurai
Samurai
Posts: 126
Joined: 18 Feb 2016, 09:25
Distribution: Linux porteus 3.2.2 KDE
Location: Spain

Re: Porteus no termina de cargar en portatil antiguo

Post#2 by port » 02 Nov 2016, 16:43

pon aqui la salida de consola o log para intentar ver que sucede. Así a ciegas es complicado ;)

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus no termina de cargar en portatil antiguo

Post#3 by txema75 » 02 Nov 2016, 20:47

port wrote:pon aqui la salida de consola o log para intentar ver que sucede. Así a ciegas es complicado ;)
Lo siento port, no entiendo muy bien a que te refieres.
No me entra en la consola, se queda la pantalla en negro con el "reloj" de carga girando y nunca termina de cargar nunca el escritorio.
Me pasa en los dos entornos kde y LQXt. He probado tb con puppy linux y tampoco carga :(
Al ejecutar desde un live CD, no se donde se crea el log :(

Creo que el problema es la tarjeta gráfica que es una "via" integrada en placa y no debe ser muy compatible con los drivers.
Antes mas, con linux mint y algún otro que probé le metía el "cheapcode" nomodeset y arrancaba. Pero son sistemas muy pesados y les cuesta mucho cargar en el portatil con lo cual no me apañaba nada

Gracias una vez más por tu ayuda port :beer:

port
Samurai
Samurai
Posts: 126
Joined: 18 Feb 2016, 09:25
Distribution: Linux porteus 3.2.2 KDE
Location: Spain

Re: Porteus no termina de cargar en portatil antiguo

Post#4 by port » 16 Nov 2016, 17:39

txema75 wrote: Creo que el problema es la tarjeta gráfica que es una "via" integrada en placa y no debe ser muy compatible con los drivers.
Antes mas, con linux mint y algún otro que probé le metía el "cheapcode" nomodeset y arrancaba. Pero son sistemas muy pesados y les cuesta mucho cargar en el portatil con lo cual no me apañaba nada
¿llegas a ver el menu de arranque de porteus? si es así prueba a arrancar con la opción de text mode, si de esta forma te arranca prueba a arrancar de nuevo en la opción por defecto (graphics mode) pero editandola previamente (te situas en ella y pulsas el tabulador [TAB]), verás una linea de letras blancas sobre fondo negro, entonces pulsas la flecha derecha durante un buen rato y finalmente tecleas un espacio y lo siguiente "vga=769" (sin las comillas claro) y le das a ENTER

con la salida de la consola me referia a lo que va escribiendo el proceso de carga en la pantalla

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus no termina de cargar en portatil antiguo

Post#5 by txema75 » 20 Nov 2016, 12:26

port wrote:
txema75 wrote: Creo que el problema es la tarjeta gráfica que es una "via" integrada en placa y no debe ser muy compatible con los drivers.
Antes mas, con linux mint y algún otro que probé le metía el "cheapcode" nomodeset y arrancaba. Pero son sistemas muy pesados y les cuesta mucho cargar en el portatil con lo cual no me apañaba nada
¿llegas a ver el menu de arranque de porteus? si es así prueba a arrancar con la opción de text mode, si de esta forma te arranca prueba a arrancar de nuevo en la opción por defecto (graphics mode) pero editandola previamente (te situas en ella y pulsas el tabulador [TAB]), verás una linea de letras blancas sobre fondo negro, entonces pulsas la flecha derecha durante un buen rato y finalmente tecleas un espacio y lo siguiente "vga=769" (sin las comillas claro) y le das a ENTER

con la salida de la consola me referia a lo que va escribiendo el proceso de carga en la pantalla
Ok, gracias port una vez mas :)
Sí que me llega al menú de arranque, y creo que donde me dices es donde yo trataba de poner el "nomodeset" que me funcionaba en otras distros
Voy a probar con el parámetro que me dices a ver si hay suerte. Ya te comentaré :friends:
Es curioso ayer probé con un viejo ISO de slax y sí arrancaba el modo gráfico :unknown:

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus no termina de cargar en portatil antiguo

Post#6 by txema75 » 20 Nov 2016, 15:08

Ya he probado y ocurre lo mismo :(
Después de ver y pasar todos los menus de carga, los textos... llego a una pantalla gris con un puntero/reloj azul redondo que parece que está cargando el escritorio, pero que no termina nunca de cargar.
La "salida de la consola" mientras va cargando, no muestra ningún error

Esto pasa con los drivers de linux. Con los drivers de NVidia que tengo para el pc, no sale ni el puntero (lógico)
Ya te digo, es extraño que en una versión más antigua de slax lo arranque, y con esta no :oops:
Igual busco alguna versíon previa de porteus?

Lo que he descubierto el plobp boot manager que me permite arrancar desde usb (no tengo soporte bios) y me ha dado un alegrón :Yahoo!:

Gracias port :friends:

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus no termina de cargar en portatil antiguo

Post#7 by txema75 » 21 Nov 2016, 12:03

Confirmo que la versión 1.0 y la 2.1 si carga :)
No entiendo por qué fallará la 3.1, pero para el uso que quiero darle, con la 2.1creo me será suficiente :)
Lo que sí tengo que investigar como instalarla en el disco duro interno

Gracias por todo port

port
Samurai
Samurai
Posts: 126
Joined: 18 Feb 2016, 09:25
Distribution: Linux porteus 3.2.2 KDE
Location: Spain

Re: Porteus no termina de cargar en portatil antiguo

Post#8 by port » 22 Nov 2016, 20:06

txema75 wrote:Ya he probado y ocurre lo mismo :(
Después de ver y pasar todos los menus de carga, los textos... llego a una pantalla gris con un puntero/reloj azul redondo que parece que está cargando el escritorio, pero que no termina nunca de cargar.
La "salida de la consola" mientras va cargando, no muestra ningún error
cuando te aparezca esa pantalla gris con el reloj azul, pulsa a la vez las teclas ctrl-alt-F1 y si te sale una pantalla negra que te pide login teclea root y luego la password, aparecerá una consola, en ella ejecuta:

Code: Select all

# cat /var/log/Xorg.0.log > ~/xlog.txt
y luego pon aquí el contenido del fichero xlog.txt

Por otro lado, ¿has podido arrancar en modo texto?

port
Samurai
Samurai
Posts: 126
Joined: 18 Feb 2016, 09:25
Distribution: Linux porteus 3.2.2 KDE
Location: Spain

Re: Porteus no termina de cargar en portatil antiguo

Post#9 by port » 22 Nov 2016, 20:20

txema75 wrote: Lo que sí tengo que investigar como instalarla en el disco duro interno
si con ello te refieres a una instalación normal de un sistema linux, sin formato live, te diré que oficialmente no es posible y extraoficialmente cuesta un poco ;-)

si te refieres a que funcione en el disco duro, sin depender de un usb o un cd, entonces es facil, usa el instalador oficial de porteus: menú porteus -> system -> Porteus Installer y sigue las instrucciones

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus no termina de cargar en portatil antiguo

Post#10 by txema75 » 24 Nov 2016, 12:08

port wrote:
cuando te aparezca esa pantalla gris con el reloj azul, pulsa a la vez las teclas ctrl-alt-F1 y si te sale una pantalla negra que te pide login teclea root y luego la password, aparecerá una consola, en ella ejecuta:

Code: Select all

# cat /var/log/Xorg.0.log > ~/xlog.txt
y luego pon aquí el contenido del fichero xlog.txt

Por otro lado, ¿has podido arrancar en modo texto?
Gracias por la ayuda Port :)
Tengo pendiente ejecutar el comando que me indicas, estos días no para mucho en casa. Ya te pondré el resultado :good:
En modo texto si que se que arranca, y ahí tecleo init 4 para pasar a modo gráfico y también falla, llego a la misma pantalla gris con un relojito azul girando.
txema75 wrote:
Lo que sí tengo que investigar como instalarla en el disco duro interno



si con ello te refieres a una instalación normal de un sistema linux, sin formato live, te diré que oficialmente no es posible y extraoficialmente cuesta un poco ;-)

si te refieres a que funcione en el disco duro, sin depender de un usb o un cd, entonces es facil, usa el instalador oficial de porteus: menú porteus -> system -> Porteus Installer y sigue las instrucciones
Ya había leido algo al respecto, que la instalación "fácil" no era una instalación como tal, y la extraoficial se complicaba. :oops:
Bueno, tampoco pasa nada, con el pendrive y porteus 2.1 de momento me apaño bien sin instalar ni nada :)

Gracias nuevamente port :friends:

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus 3.1 no termina de cargar en portatil antiguo

Post#11 by txema75 » 24 Nov 2016, 14:28

Por fin he sacado un momento, tampoco cuesta nada :)
Me sobraba un ~ que no podía escribir (me sale el teclado en inglés en la consola), pero creo que sin él ha funcionado igual :)
Te pego el log
Gracias port :beer:
  • [ 30.489]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 30.489] X Protocol Version 11, Revision 0
    [ 30.489] Build Operating System: Slackware 14.1 Slackware Linux Project
    [ 30.489] Current Operating System: Linux porteus 3.17.4-porteus #1 SMP PREEMPT Fri Dec 12 16:04:56 Local time zone must be set-- i686
    [ 30.489] Kernel command line: quiet initrd=initrd.xz changes=/porteus/porteussave.dat kmap=es,us BOOT_IMAGE=vmlinuz
    [ 30.489] Build Date: 11 January 2014 04:25:55PM
    [ 30.489]
    [ 30.489] Current version of pixman: 0.30.2
    [ 30.490] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 30.490] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 30.490] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 25 15:06:50 2016
    [ 30.491] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 30.491] (==) No Layout section. Using the first Screen section.
    [ 30.491] (==) No screen section available. Using defaults.
    [ 30.491] (**) |-->Screen "Default Screen Section" (0)
    [ 30.491] (**) | |-->Monitor "<default monitor>"
    [ 30.492] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 30.492] (==) Automatically adding devices
    [ 30.492] (==) Automatically enabling devices
    [ 30.492] (==) Automatically adding GPU devices
    [ 30.492] (WW) The directory "/usr/share/fonts/local" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
    [ 30.492] Entry deleted from font path.
    [ 30.492] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
    [ 30.492] (WW) The directory "/usr/share/fonts/OTF" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/Type1" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/misc" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/CID" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
    [ 30.492] Entry deleted from font path.
    [ 30.492] (==) FontPath set to:

    [ 30.492] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 30.492] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 30.492] (II) Loader magic: 0x8256480
    [ 30.492] (II) Module ABI versions:
    [ 30.492] X.Org ANSI C Emulation: 0.4
    [ 30.492] X.Org Video Driver: 14.1
    [ 30.492] X.Org XInput driver : 19.1
    [ 30.492] X.Org Server Extension : 7.0
    [ 30.494] (--) PCI:*(0:1:0:0) 1039:6330:1025:0082 rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x00009000/128
    [ 30.494] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 30.494] Initializing built-in extension Generic Event Extension
    [ 30.494] Initializing built-in extension SHAPE
    [ 30.494] Initializing built-in extension MIT-SHM
    [ 30.494] Initializing built-in extension XInputExtension
    [ 30.494] Initializing built-in extension XTEST
    [ 30.494] Initializing built-in extension BIG-REQUESTS
    [ 30.494] Initializing built-in extension SYNC
    [ 30.494] Initializing built-in extension XKEYBOARD
    [ 30.494] Initializing built-in extension XC-MISC
    [ 30.494] Initializing built-in extension XINERAMA
    [ 30.494] Initializing built-in extension XFIXES
    [ 30.494] Initializing built-in extension RENDER
    [ 30.494] Initializing built-in extension RANDR
    [ 30.495] Initializing built-in extension COMPOSITE
    [ 30.495] Initializing built-in extension DAMAGE
    [ 30.495] Initializing built-in extension MIT-SCREEN-SAVER
    [ 30.495] Initializing built-in extension DOUBLE-BUFFER
    [ 30.495] Initializing built-in extension RECORD
    [ 30.495] Initializing built-in extension DPMS
    [ 30.495] Initializing built-in extension X-Resource
    [ 30.495] Initializing built-in extension XVideo
    [ 30.495] Initializing built-in extension XVideo-MotionCompensation
    [ 30.495] Initializing built-in extension XFree86-VidModeExtension
    [ 30.495] Initializing built-in extension XFree86-DGA
    [ 30.495] Initializing built-in extension XFree86-DRI
    [ 30.495] Initializing built-in extension DRI2
    [ 30.495] (II) LoadModule: "glx"
    [ 30.498] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 30.498] (II) Module glx: vendor="X.Org Foundation"
    [ 30.498] compiled for 1.14.5, module version = 1.0.0
    [ 30.499] ABI class: X.Org Server Extension, version 7.0
    [ 30.499] (==) AIGLX enabled
    [ 30.499] Loading extension GLX
    [ 30.499] (==) Matched sis as autoconfigured driver 0
    [ 30.499] (==) Matched vesa as autoconfigured driver 1
    [ 30.499] (==) Matched modesetting as autoconfigured driver 2
    [ 30.499] (==) Matched fbdev as autoconfigured driver 3
    [ 30.499] (==) Assigned the driver to the xf86ConfigLayout
    [ 30.499] (II) LoadModule: "sis"
    [ 30.500] (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
    [ 30.500] (II) Module sis: vendor="X.Org Foundation"
    [ 30.500] compiled for 1.14.2, module version = 0.10.7
    [ 30.500] Module class: X.Org Video Driver
    [ 30.500] ABI class: X.Org Video Driver, version 14.1
    [ 30.500] (II) LoadModule: "vesa"
    [ 30.501] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 30.501] (II) Module vesa: vendor="X.Org Foundation"
    [ 30.501] compiled for 1.14.3, module version = 2.3.3
    [ 30.501] Module class: X.Org Video Driver
    [ 30.501] ABI class: X.Org Video Driver, version 14.1
    [ 30.501] (II) LoadModule: "modesetting"
    [ 30.502] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 30.502] (II) Module modesetting: vendor="X.Org Foundation"
    [ 30.502] compiled for 1.14.5, module version = 0.9.0
    [ 30.502] Module class: X.Org Video Driver
    [ 30.502] ABI class: X.Org Video Driver, version 14.1
    [ 30.502] (II) LoadModule: "fbdev"
    [ 30.505] (WW) Warning, couldn't open module fbdev
    [ 30.505] (II) UnloadModule: "fbdev"
    [ 30.505] (II) Unloading fbdev
    [ 30.505] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 30.505] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
    SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
    SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
    SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
    SIS340
    [ 30.505] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
    Volari V3XT/V5/V8/Duo (XG40)
    [ 30.505] (II) VESA: driver for VESA chipsets: vesa
    [ 30.505] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 30.505] (++) using VT number 7

    [ 30.507] (WW) Falling back to old probe method for sis
    [ 30.507] (--) Assigning device section with no busID to primary device
    [ 30.507] (--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
    [ 30.507] (WW) Falling back to old probe method for vesa
    [ 30.507] (WW) Falling back to old probe method for modesetting
    [ 30.507] (EE) open /dev/dri/card0: No such file or directory
    [ 30.507] (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.14.2.0)
    [ 30.507] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
    [ 30.507] (II) SIS(0): *** See http://www.winischhofer.eu/linuxsisvga.shtml
    [ 30.507] (II) SIS(0): *** for documentation and updates.
    [ 30.507] (--) SIS(0): sisfb not found
    [ 30.507] (--) SIS(0): Relocated I/O registers at 0x9000
    [ 30.508] (II) Loading sub module "ramdac"
    [ 30.508] (II) LoadModule: "ramdac"
    [ 30.508] (II) Module "ramdac" already built-in
    [ 30.508] (II) SIS(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 30.508] (==) SIS(0): Depth 24, (--) framebuffer bpp 32
    [ 30.508] (==) SIS(0): RGB weight 888
    [ 30.508] (==) SIS(0): Default visual is TrueColor
    [ 30.508] (WW) SIS(0): Could not find/read video BIOS
    [ 30.508] (==) SIS(0): Using HW cursor
    [ 30.508] (==) SIS(0): Color HW cursor is enabled
    [ 30.508] (II) SIS(0): Using VRAM command queue, size 512k
    [ 30.508] (==) SIS(0): Hotkey display switching is enabled
    [ 30.508] (II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
    [ 30.508] (II) SIS(0): whether enabled or disabled. This is no driver bug.
    [ 30.508] (==) SIS(0): SiSCtrl utility interface is disabled
    [ 30.508] (II) SIS(0): For information on SiSCtrl, see
    http://www.winischhofer.eu/linuxsispart1.shtml#sisctrl
    [ 30.508] (==) SIS(0): DRI disabled
    [ 30.508] (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
    [ 30.508] (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
    [ 30.508] (--) SIS(0): DIMM0 is DDR SDRAM
    [ 30.508] (--) SIS(0): DIMM1 is DDR SDRAM
    [ 30.508] (--) SIS(0): DIMM2 is not installed
    [ 30.508] (--) SIS(0): DRAM type: DDR SDRAM
    [ 30.508] (--) SIS(0): Memory clock: 332.892 MHz
    [ 30.508] (--) SIS(0): DRAM bus width: 64 bit
    [ 30.508] (--) SIS(0): Linear framebuffer at 0xE8000000
    [ 30.508] (--) SIS(0): MMIO registers at 0xE2100000 (size 64K)
    [ 30.508] (--) SIS(0): VideoRAM: 65536 KB
    [ 30.508] (II) SIS(0): Using 64960K of framebuffer memory at offset 0K
    [ 30.508] (--) SIS(0): Hardware supports two video overlays
    [ 30.509] (--) SIS(0): Detected SiS302LV video bridge (Charter/UMC-1, ID 1; Rev 0xe1)
    [ 31.725] (--) SIS(0): No CRT1/VGA detected
    [ 31.725] (--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [2cc106])
    [ 31.725] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 31.725] (II) SIS(0): CRT1 gamma correction is enabled
    [ 31.725] (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
    [ 31.725] (II) SIS(0): CRT2 gamma correction is enabled
    [ 31.725] (--) SIS(0): Memory bandwidth at 32 bpp is 665.784 MHz
    [ 31.725] (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT2)
    [ 31.725] (--) SIS(0): Detected LCD PanelDelayCompensation1 0x00 (for LCD=CRT1)
    [ 31.725] (--) SIS(0): 302LV/302ELV: Using EMI 0x600d703f (LCD)
    [ 31.725] (II) Loading sub module "ddc"
    [ 31.726] (II) LoadModule: "ddc"
    [ 31.726] (II) Module "ddc" already built-in
    [ 31.726] (--) SIS(0): CRT2 DDC probing failed
    [ 31.726] (==) SIS(0): Min pixel clock is 10 MHz
    [ 31.726] (--) SIS(0): Max pixel clock is 400 MHz
    [ 31.726] (II) SIS(0): Replaced entire mode list with built-in modes
    [ 31.726] (II) SIS(0): Correcting missing CRT2 monitor HSync range
    [ 31.726] (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
    [ 31.726] (II) SIS(0): "Unknown reason" in the following list means that the mode
    [ 31.726] (II) SIS(0): is not supported on the chipset/bridge/current output device.
    [ 31.726] (II) SIS(0): <default monitor>: Using hsync range of 30.00-80.00 kHz
    [ 31.726] (II) SIS(0): <default monitor>: Using vrefresh range of 59.00-61.00 Hz
    [ 31.726] (II) SIS(0): <default monitor>: Using vrefresh value of 71.00 Hz
    [ 31.726] (WW) SIS(0): Unable to estimate virtual size
    [ 31.726] (II) SIS(0): Clock range: 10.00 to 400.00 MHz
    [ 31.726] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "800x600" (hsync out of range)
    [ 31.726] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
    [ 31.726] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
    [ 31.726] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
    [ 31.726] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
    [ 31.726] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
    [ 31.726] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
    [ 31.726] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1280x720" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1280x720" (hsync out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1280x960" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1280x960" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1280x768" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1280x768" (hsync out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1360x768" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1280x800" (vrefresh out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1280x800" (hsync out of range)
    [ 31.727] (II) SIS(0): Not using default mode "1680x1050" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1920x1080" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1280x854" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1280x854" (unknown reason)
    [ 31.727] (II) SIS(0): Not using default mode "1280x854" (unknown reason)
    [ 31.727] (--) SIS(0): Virtual size is 1280x800 (pitch 1280)
    [ 31.727] (**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
    [ 31.727] (**) SIS(0): *Default mode "1280x768" (1280x768) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
    [ 31.727] (**) SIS(0): *Default mode "1280x720" (1280x720) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
    [ 31.727] (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
    [ 31.727] (**) SIS(0): *Default mode "1024x576" (1024x576) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
    [ 31.727] (**) SIS(0): *Default mode "960x600" (960x600) (For CRT device: 41.5 MHz, 37.1 kHz, 60.0 Hz)
    [ 31.727] (**) SIS(0): *Default mode "960x540" (960x540) (For CRT device: 37.3 MHz, 33.8 kHz, 60.0 Hz)
    [ 31.727] (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
    [ 31.727] (**) SIS(0): *Default mode "768x576" (768x576) (For CRT device: 35.0 MHz, 35.9 kHz, 60.1 Hz)
    [ 31.727] (**) SIS(0): *Default mode "720x576" (720x576) (For CRT device: 32.7 MHz, 35.9 kHz, 60.1 Hz)
    [ 31.727] (**) SIS(0): *Default mode "856x480" (856x480) (For CRT device: 33.9 MHz, 31.7 kHz, 59.8 Hz)
    [ 31.727] (**) SIS(0): *Default mode "848x480" (848x480) (For CRT device: 33.7 MHz, 31.0 kHz, 60.0 Hz)
    [ 31.727] (**) SIS(0): *Default mode "800x480" (800x480) (For CRT device: 39.8 MHz, 37.7 kHz, 60.0 Hz)
    [ 31.727] (**) SIS(0): *Default mode "720x480" (720x480) (For CRT device: 28.3 MHz, 31.6 kHz, 61.0 Hz)
    [ 31.727] (**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
    [ 31.727] (**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
    [ 31.727] (**) SIS(0): *Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D))
    [ 31.727] (**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
    [ 31.727] (**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
    [ 31.727] (**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
    [ 31.727] (==) SIS(0): DPI set to (96, 96)
    [ 31.727] (II) Loading sub module "fb"
    [ 31.727] (II) LoadModule: "fb"
    [ 31.729] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 31.730] (II) Module fb: vendor="X.Org Foundation"
    [ 31.730] compiled for 1.14.5, module version = 1.0.0
    [ 31.730] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 31.730] (II) Loading sub module "exa"
    [ 31.730] (II) LoadModule: "exa"
    [ 31.731] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 31.732] (II) Module exa: vendor="X.Org Foundation"
    [ 31.732] compiled for 1.14.5, module version = 2.6.0
    [ 31.732] ABI class: X.Org Video Driver, version 14.1
    [ 31.732] (II) UnloadModule: "vesa"
    [ 31.732] (II) Unloading vesa
    [ 31.732] (II) UnloadModule: "modesetting"
    [ 31.732] (II) Unloading modesetting
    [ 31.732] (--) Depth 24 pixmap format is 32 bpp
    [ 31.732] (II) Loading sub module "vbe"
    [ 31.732] (II) LoadModule: "vbe"
    [ 31.733] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 31.734] (II) Module vbe: vendor="X.Org Foundation"
    [ 31.734] compiled for 1.14.5, module version = 1.1.0
    [ 31.734] ABI class: X.Org Video Driver, version 14.1
    [ 31.734] (II) Loading sub module "int10"
    [ 31.734] (II) LoadModule: "int10"
    [ 31.735] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 31.735] (II) Module int10: vendor="X.Org Foundation"
    [ 31.735] compiled for 1.14.5, module version = 1.0.0
    [ 31.735] ABI class: X.Org Video Driver, version 14.1
    [ 31.735] (II) SIS(0): initializing int10
    [ 31.738] (II) SIS(0): Primary V_BIOS segment is: 0xc000
    [ 31.740] (II) SIS(0): VESA BIOS detected
    [ 31.740] (II) SIS(0): VESA VBE Version 3.0
    [ 31.740] (II) SIS(0): VESA VBE Total Mem: 16384 kB
    [ 31.740] (II) SIS(0): VESA VBE OEM: SiS
    [ 31.740] (II) SIS(0): VESA VBE OEM Software Rev: 1.0
    [ 31.740] (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
    [ 31.740] (II) SIS(0): VESA VBE OEM Product: 6330
    [ 31.740] (II) SIS(0): VESA VBE OEM Product Rev: 2.24.4e
    [ 31.771] (II) SIS(0): Setting standard mode 0x16
    [ 32.570] (II) EXA(0): Offscreen pixmap area of 62423040 bytes
    [ 32.570] (II) EXA(0): Driver registered support for the following operations:
    [ 32.570] (II) Solid
    [ 32.570] (II) Copy
    [ 32.570] (II) UploadToScreen
    [ 32.570] (II) DownloadFromScreen
    [ 32.570] (--) SIS(0): CPU frequency 1500.01Mhz
    [ 32.574] (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
    [ 32.589] (--) SIS(0): Checked libc memcpy()... 188.0 MiB/s
    [ 32.603] (--) SIS(0): Checked built-in-1 memcpy()... 188.0 MiB/s
    [ 32.647] (--) SIS(0): Checked built-in-2 memcpy()... 58.1 MiB/s
    [ 32.661] (--) SIS(0): Checked MMX memcpy()... 188.2 MiB/s
    [ 32.675] (--) SIS(0): Checked MMX2 memcpy()... 188.2 MiB/s
    [ 32.675] (--) SIS(0): Using MMX method for aligned data transfers to video RAM
    [ 32.675] (--) SIS(0): Using MMX method for unaligned data transfers to video RAM
    [ 32.676] (--) SIS(0): CPU frequency 1500.01Mhz
    [ 32.679] (II) SIS(0): Benchmarking video RAM to system RAM memory transfer methods:
    [ 32.769] (--) SIS(0): Checked libc memcpy()... 33.2 MiB/s
    [ 32.853] (--) SIS(0): Checked built-in-1 memcpy()... 33.4 MiB/s
    [ 32.964] (--) SIS(0): Checked built-in-2 memcpy()... 24.6 MiB/s
    [ 33.018] (--) SIS(0): Checked MMX memcpy()... 50.7 MiB/s
    [ 33.070] (--) SIS(0): Checked MMX2 memcpy()... 52.1 MiB/s
    [ 33.070] (--) SIS(0): Using MMX2 method for aligned data transfers from video RAM
    [ 33.070] (--) SIS(0): Using MMX2 method for unaligned data transfers from video RAM
    [ 33.070] (==) SIS(0): Backing store disabled
    [ 33.070] (==) SIS(0): Silken mouse enabled
    [ 33.071] (==) SIS(0): DPMS enabled
    [ 33.071] (II) SIS(0): Using SiS300/315/330/340 series HW Xv
    [ 33.071] (II) SIS(0): Default Xv adaptor is Video Overlay
    [ 33.123] (II) SIS(0): Initialized SISCTRL extension version 0.1
    [ 33.123] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
    [ 33.124] (==) RandR enabled
    [ 33.141] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 33.141] (II) AIGLX: Screen 0 is not DRI capable
    [ 33.149] (II) AIGLX: Loaded and initialized swrast
    [ 33.149] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 33.195] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 33.196] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 33.196] (**) Power Button: Applying InputClass "keyboard-all"
    [ 33.196] (II) LoadModule: "evdev"
    [ 33.197] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 33.198] (II) Module evdev: vendor="X.Org Foundation"
    [ 33.198] compiled for 1.14.5, module version = 2.8.4
    [ 33.198] Module class: X.Org XInput Driver
    [ 33.198] ABI class: X.Org XInput driver, version 19.1
    [ 33.198] (II) Using input driver 'evdev' for 'Power Button'
    [ 33.198] (**) Power Button: always reports core events
    [ 33.198] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 33.198] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 33.198] (--) evdev: Power Button: Found keys
    [ 33.198] (II) evdev: Power Button: Configuring as keyboard
    [ 33.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 33.198] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 33.198] (**) Option "xkb_rules" "evdev"
    [ 33.198] (**) Option "xkb_model" "pc104"
    [ 33.198] (**) Option "xkb_layout" "us"
    [ 33.198] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 33.239] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 33.239] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 33.239] (**) Power Button: Applying InputClass "keyboard-all"
    [ 33.239] (II) Using input driver 'evdev' for 'Power Button'
    [ 33.239] (**) Power Button: always reports core events
    [ 33.239] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 33.239] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 33.239] (--) evdev: Power Button: Found keys
    [ 33.239] (II) evdev: Power Button: Configuring as keyboard
    [ 33.239] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
    [ 33.239] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 33.239] (**) Option "xkb_rules" "evdev"
    [ 33.239] (**) Option "xkb_model" "pc104"
    [ 33.239] (**) Option "xkb_layout" "us"
    [ 33.239] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 33.240] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
    [ 33.240] (II) No input driver specified, ignoring this device.
    [ 33.240] (II) This device may have been added with another device file.
    [ 33.240] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 33.240] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 33.240] (**) Sleep Button: Applying InputClass "keyboard-all"
    [ 33.240] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 33.240] (**) Sleep Button: always reports core events
    [ 33.240] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 33.240] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 33.240] (--) evdev: Sleep Button: Found keys
    [ 33.240] (II) evdev: Sleep Button: Configuring as keyboard
    [ 33.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
    [ 33.240] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 33.240] (**) Option "xkb_rules" "evdev"
    [ 33.240] (**) Option "xkb_model" "pc104"
    [ 33.240] (**) Option "xkb_layout" "us"
    [ 33.241] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 33.241] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
    [ 33.241] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 33.241] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
    [ 33.241] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 33.241] (**) AT Translated Set 2 keyboard: always reports core events
    [ 33.242] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
    [ 33.242] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 33.242] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 33.242] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 33.242] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
    [ 33.242] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 33.242] (**) Option "xkb_rules" "evdev"
    [ 33.242] (**) Option "xkb_model" "pc104"
    [ 33.242] (**) Option "xkb_layout" "us"
    [ 33.242] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 33.242] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
    [ 33.243] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 33.243] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
    [ 33.243] (II) LoadModule: "synaptics"
    [ 33.244] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 33.244] (II) Module synaptics: vendor="X.Org Foundation"
    [ 33.245] compiled for 1.14.5, module version = 1.7.6
    [ 33.245] Module class: X.Org XInput Driver
    [ 33.245] ABI class: X.Org XInput driver, version 19.1
    [ 33.245] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 33.245] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 33.245] (**) Option "Device" "/dev/input/event5"
    [ 33.268] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 61)
    [ 33.268] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 100)
    [ 33.268] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 33.268] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 33.268] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
    [ 33.268] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 33.268] (**) Option "TapButton1" "1"
    [ 33.268] (**) Option "TapButton2" "2"
    [ 33.268] (**) Option "TapButton3" "3"
    [ 33.268] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 33.268] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 33.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
    [ 33.280] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
    [ 33.280] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 33.280] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 33.280] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
    [ 33.280] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 33.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 33.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 33.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 33.280] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 33.281] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 33.281] (II) No input driver specified, ignoring this device.
    [ 33.281] (II) This device may have been added with another device file.
    [ 47.031] (II) SIS(0): Restoring by setting old mode 0x03

port
Samurai
Samurai
Posts: 126
Joined: 18 Feb 2016, 09:25
Distribution: Linux porteus 3.2.2 KDE
Location: Spain

Re: Porteus 3.1 no termina de cargar en portatil antiguo

Post#12 by port » 26 Nov 2016, 21:14

parece que tu problema es con el dirver SIS, ejecuta este comando y pon aquí el resultado:

Code: Select all

# lspci | grep VGA
luego este comando y de nuevo pon el resultado:

Code: Select all

# lsmod | grep -i sis
también dime si tienes algún fichero en el directorio /etc/X11/xorg.conf.d/ especialmente alguno que contenga sis en el nombre

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus 3.1 no termina de cargar en portatil antiguo

Post#13 by txema75 » 26 Nov 2016, 21:33

Gracias port :)
Lo miro y te pongo el resultado :good:

txema75
Black ninja
Black ninja
Posts: 46
Joined: 07 Feb 2016, 17:45
Distribution: Porteus 3.1 64bits
Location: spain

Re: Porteus 3.1 no termina de cargar en portatil antiguo

Post#14 by txema75 » 27 Nov 2016, 14:27

port wrote:parece que tu problema es con el dirver SIS, ejecuta este comando y pon aquí el resultado:

Code: Select all

# lspci | grep VGA
luego este comando y de nuevo pon el resultado:

Code: Select all

# lsmod | grep -i sis
Ya lo siento port :good:
Lo he intentado enviar a un log pero me sale vacío
He tecleado

Code: Select all

# lspci / grep VGA > /log1.txt

Code: Select all

# lsmod / grep -i sis > /log2.txt
El carácter

Code: Select all

|
no lo encuentro en el teclado, que me sale en inglés mientras no carga la interfaz gráfica (aunque en los parámetros de inicio le especifico español)
también dime si tienes algún fichero en el directorio /etc/X11/xorg.conf.d/ especialmente alguno que contenga sis en el nombre
desde la terminal le he hecho un "dir" (no se si es el comando adecuado), y me sale vacío.
Tengo que buscar los comandos de linux porteus qu yo los que me sé son los de dos...
En modo gráfico mirándolo con otro ordenador, el directorio me sale vacío también


Gracias una vez mas port :friends:

Post Reply