Porteus-v3.2rc3 Bug Reports

Please reproduce your error on a second machine before posting, and check the error by running without saved changes or extra modules (See FAQ No. 13, "How to report a bug"). For unstable Porteus versions (alpha, beta, rc) please use the relevant thread in our "Development" section.
User avatar
Blaze
Moderator
Moderator
Posts: 1383
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#91 by Blaze » 19 Jun 2016, 17:15

Bogomips wrote:
burdi01 wrote:@Jack: The engrampa/iso problem is a know one.
Just mount iso file from CLI.

Code: Select all

mkdir  iso
sudo  mount file.iso  iso
So far had no problem with this.
Better to use gvfsd-archive for mount ISO. In CLI it will be

Code: Select all

cd here_directory_where_your_ISO_file
sudo /usr/libexec/gvfsd-archive file=here_name_of_ISO_file
for example

Code: Select all

sudo /usr/libexec/gvfsd-archive file=/mnt/sda5/Porteus-LXDE-v3.1-i486.iso
tome, hm, in CLI and GUI all ok

Code: Select all

root@porteus:~# cd /tmp
root@porteus:/tmp# rpm2xzm syslinux-extlinux-6.04-0.1.fc25.x86_64.rpm syslinux-extlinux-6.04-0.1.fc25.x86_64.xzm

Slackware package maker, version 3.141593.

Searching for symbolic links:
etc/extlinux.conf    ../boot/extlinux/extlinux.conf

Making symbolic link creation script:
( cd etc ; rm -rf extlinux.conf )
( cd etc ; ln -sf ../boot/extlinux/extlinux.conf extlinux.conf )

It is recommended that you make these lines your new installation script.

Would you like to make this stuff the install script for this package
and remove the symbolic links ([y]es, [n]o)? y


Removing symbolic links:
удалён './etc/extlinux.conf'

Creating your new ./install/doinst.sh...

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /tmp/rpm2xzm1791/syslinux-extlinux-6.04-0.1.fc25.x86_64.txz

./
sbin/
sbin/extlinux
install/
install/doinst.sh
etc/

Slackware package /tmp/rpm2xzm1791/syslinux-extlinux-6.04-0.1.fc25.x86_64.txz created.

Verifying package syslinux-extlinux-6.04-0.1.fc25.x86_64.txz.
Installing package syslinux-extlinux-6.04-0.1.fc25.x86_64.txz:
PACKAGE DESCRIPTION:
Executing install script for syslinux-extlinux-6.04-0.1.fc25.x86_64.txz.
Package syslinux-extlinux-6.04-0.1.fc25.x86_64.txz installed.

Creating /tmp/rpm2xzm1791/syslinux-extlinux-6.04-0.1.fc25.x86_64.xzm

root@porteus:/tmp# ls
SBo/      mozilla_root0/       syslinux-extlinux-6.04-0.1.fc25.x86_64.rpm  usm/
mc-root/  pulse-SSOPWtVdHBVi/  syslinux-extlinux-6.04-0.1.fc25.x86_64.xzm
root@porteus:/tmp#       
About simplescreenrecorder. simplescreenrecorder-0.3.6-1-x64-3.2-needQT4.xzm + dependence qt-4.8.7-x86_64-1_slack14.1.xzm
Image
Need to press 'No' for use NVIDIA proprietary display driver and simplescreenrecorder is working for me fine (he is recording video and audio from my Porteus screen + support PulseAudio).
Linux porteus 4.12.7-porteus #1 SMP PREEMPT Sun Aug 13 17:38:30 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

Bogomips
Full of knowledge
Full of knowledge
Posts: 2539
Joined: 25 Jun 2014, 15:21
Distribution: 3.2.2 Cinnamon & KDE5
Location: London

Re: Porteus-v3.2rc3 Bug Reports

Post#92 by Bogomips » 19 Jun 2016, 18:07

Blaze wrote:
Bogomips wrote:[Just mount iso file from CLI.

Code: Select all

mkdir  iso
sudo  mount file.iso  iso
So far had no problem with this.
Better to use gvfsd-archive for mount ISO. In CLI
Not a hundred percent certain but think the mount command uses libarchive, which is installed on this system. http://libarchive.org/
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB

User avatar
Ed_P
Contributor
Contributor
Posts: 3155
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus-v3.2rc3 Bug Reports

Post#93 by Ed_P » 19 Jun 2016, 19:32

Bogomips wrote:
Ed_P wrote:init 4 -> init: must be superuser.
That's right. su, supply pw, and become Superuser.
I'm obviously not explaining this well.

In 3.2 rc3 the init 4 command results is this error msg:

Code: Select all

-bash: init: command not found.
In 3.0 the init 4 command results in this helpful msg:

Code: Select all

init: must be superuser.
Ed

User avatar
Blaze
Moderator
Moderator
Posts: 1383
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#94 by Blaze » 19 Jun 2016, 19:35

Xfce4 x86_64 RC3

Code: Select all

root@porteus:~# bleachbit
/usr/bin/env: «python»: No such file or directory
root@porteus:~#
bleachbit + python and Xfce??? OMG

BTW I tried to build python module

Code: Select all

python-2.7.5-x86_64-1.txz [11868K] [not installed]
tcl-8.6.1-x86_64-1.txz [2500K] [not installed]
tk-8.6.1-x86_64-1.txz [1700K] [not installed]
via usm and received this message

Code: Select all

Updating shared library links:  /sbin/ldconfig

Gtk-WARNING (recursed) **: /usr/lib64/gtk-2.0/2.10.0/engines/libadwaita.so: cannot open shared object file: No such file or directory

Gtk-WARNING (recursed) **: /usr/lib64/gtk-2.0/2.10.0/engines/libadwaita.so: cannot open shared object file: No such file or directory

/tmp/usm/python-2.7.5-x86_64-bundle.xzm is ready.

Code: Select all

root@porteus:~# bleachbit
Traceback (most recent call last):
  File "/usr/bin/bleachbit", line 40, in <module>
    import gtk
ImportError: No module named gtk
root@porteus:~#
Linux porteus 4.12.7-porteus #1 SMP PREEMPT Sun Aug 13 17:38:30 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

tome
Contributor
Contributor
Posts: 562
Joined: 26 Jun 2013, 14:03
Distribution: x64 Openbox
Location: Poland
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#95 by tome » 19 Jun 2016, 19:48

Blaze, are you trying rpm2xzm in Fresh Mode without devel, 7zip, peazip...?

Fujitsu P702 xfce4-x86_64
I can't also use Ctrl+Alt+F-key to switch sessions - many warnings, pictures here: https://www.dropbox.com/sc/axrmjkznsbcb ... gAhtxhDCha
In menu (porteus-button) switch icon and user icon don't work "Failed to execute child process "mugshot" (No such file or directory)"

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#96 by brokenman » 19 Jun 2016, 21:12

@Tome
Please try adding this link for now.
ln -s /lib64/libdb-4.4.so /usr/lib64/libdb-4.8.so

@Blaze
Bleachbit will be removed from xfce4.
The two missing icons (at the bottom) in nemo ... after installing various icon packages I still can't find the correct icon names.

@Ed_P
Not sure why in v3.0 you get a return from guest when calling init. init is in sbin and as such guest should not even know about it.
How do i become super user?
Wear your underpants on the outside and put on a cape.

burdi01
Black ninja
Black ninja
Posts: 49
Joined: 18 Aug 2013, 12:09
Distribution: Slackware, Xubuntu
Location: The Netherlands

Re: Porteus-v3.2rc3 Bug Reports

Post#97 by burdi01 » 20 Jun 2016, 08:13

Blaze wrote:
Bogomips wrote:
burdi01 wrote:@Jack: The engrampa/iso problem is a know one.
Just mount iso file from CLI.

Code: Select all

mkdir  iso
sudo  mount file.iso  iso
So far had no problem with this.
Better to use gvfsd-archive for mount ISO. In CLI it will be

Code: Select all

cd here_directory_where_your_ISO_file
sudo /usr/libexec/gvfsd-archive file=here_name_of_ISO_file
@Bogomips: As it is so convenient to open an ISO in Caja (the mate "nautilus", which then calls engrampa (the mate "file-roller"), which then calls 7z (the [un]zipper) I regard mounting the ISO from the CLI as a workaround in this case.

@Blaze: What is the advantage of using gvfsd-archive over Bogomips' mount?

@All: But you are missing my point. Engrampa/7z is not to blame (though 7z might be somewhat more lenient here): big ISOs produced by mkisofs have problems, the same big ISOs produced by genisoimage or xorriso are ok.
How to repack such an ISO is described in https://drive.google.com/file/d/0B0gP2v ... sp=sharing. Have a look at the mkgriso script therein. “Your changes” are to untar this tar to the root of the cdrom and amend the “VER” in the script.

:D

User avatar
Blaze
Moderator
Moderator
Posts: 1383
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#98 by Blaze » 20 Jun 2016, 16:59

tome, with devel.

burdi01, gvfsd-archive is easily to mounts ISO files into the left sidebar of the file manager (Thunar, etc)
brokenman wrote:The two missing icons (at the bottom) in nemo ... after installing various icon packages I still can't find the correct icon names.
I think you are forgot about nemo-data package. I converted nemo-data (2.2.4-2) (probably there is a newer version) to xzm module nemo-data_2.2.4-2_all.xzm

I tested it and all icons are present - look at this screenshot
Image

Code: Select all

/usr/share/icons/hicolor/scalable/actions/location-symbolic.svg
/usr/share/icons/hicolor/scalable/actions/sidebar-hide-symbolic.svg
/usr/share/icons/hicolor/scalable/actions/sidebar-places-symbolic.svg
/usr/share/icons/hicolor/scalable/actions/sidebar-show-symbolic.svg
/usr/share/icons/hicolor/scalable/actions/sidebar-tree-symbolic.svg
/usr/share/icons/hicolor/scalable/actions/view-compact-symbolic.svg
Xfce x86_64 RC3

Code: Select all

root@porteus:~# firefox
Vector smash protection is enabled.

(plugin-container:1595): Gtk-WARNING **: /usr/lib64/gtk-2.0/2.10.0/engines/libadwaita.so: cannot open shared object file: No such file or directory

(plugin-container:1595): Gtk-WARNING **: /usr/lib64/gtk-2.0/2.10.0/engines/libadwaita.so: cannot open shared object file: No such file or directory
Vector smash protection is enabled.
root@porteus:~#
Last edited by Blaze on 20 Jun 2016, 17:32, edited 2 times in total.
Linux porteus 4.12.7-porteus #1 SMP PREEMPT Sun Aug 13 17:38:30 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

rchase
Samurai
Samurai
Posts: 154
Joined: 10 Jan 2016, 17:26
Distribution: Porteus 3.2.2 xfce x64
Location: Denver, Colorado

Re: Porteus-v3.2rc3 Bug Reports

Post#99 by rchase » 20 Jun 2016, 17:23

Porteus-v3.2rc3 x86 XFCE does not recognize the Linux installation script as such and opens Mousepad instead of executing it -- how can I install Porteus to a partition on a hard drive?

User avatar
Ed_P
Contributor
Contributor
Posts: 3155
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus-v3.2rc3 Bug Reports

Post#100 by Ed_P » 20 Jun 2016, 18:05

brokenman wrote: @Ed_P
Not sure why in v3.0 you get a return from guest when calling init. init is in sbin and as such guest should not even know about it.
Must have been a fanthom tweak. Probably a bash script named init that guest can access.
Ed

Jack
Contributor
Contributor
Posts: 1063
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Porteus-v3.2rc3 Bug Reports

Post#101 by Jack » 20 Jun 2016, 18:41

Jack wrote:Mate rc3 x86_64

I try to open a ISO file with Engrampa 1.14.0 and I got a error and the error was "An error occurred while loading the archive." Can some verify that?
I install this old file "p7zip-9.20.1-x86_64-1_slack.txz" and converted it to "p7zip-9.20.1-x86_64-1_slack.xzm" and it fixed the ISO problem I had. It might be wrong way to fix it but it works for me.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

scdbackup
White ninja
White ninja
Posts: 7
Joined: 20 Jun 2016, 20:58
Distribution: Debian
Location: Germany

Re: Porteus-v3.2rc3 Bug Reports

Post#102 by scdbackup » 20 Jun 2016, 21:06

Hi,

as developer of xorriso i have to nitpick that it is not the
size of the ISO but the existence of empty files which makes
mkisofs output indigestible for 7z.

mkisofs uses block address 4294967280 (aka 0xfffffff0 aka -16)
for files which are no directories and contain no data bytes.
7z checks sanity of block addresses versus ISO size.

Have a nice day :)

Thomas

User avatar
francois
Contributor
Contributor
Posts: 4942
Joined: 28 Dec 2010, 14:25
Distribution: kde xfce porteus manjaro kubun
Location: Enfin l'été, le changement climatique attendu: le soleil.

Re: Porteus-v3.2rc3 Bug Reports

Post#103 by francois » 20 Jun 2016, 21:15

Sorry for being absent in the testing of this rc3. Will there be a rc4? Would it be of any help for me to test rc3 at this point?
Voltaire: Le mieux est l'ennemi du bien.

User avatar
Ed_P
Contributor
Contributor
Posts: 3155
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus-v3.2rc3 Bug Reports

Post#104 by Ed_P » 20 Jun 2016, 22:23

francois wrote:Would it be of any help for me to test rc3 at this point?
I would think so. You might find something new or confirm someone else's findings.
Ed

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#105 by brokenman » 21 Jun 2016, 02:03

I think you are forgot about nemo-data package.
Not forgot. I didn't even know if existed. It is not in the Cinnamon Slack Builds. Thanks for doing the extra work. I will include this extra package.

Porteus-v3.2rc3 x86 XFCE does not recognize the Linux installation script as such and opens Mousepad instead of executing it
Thanks. Will check out the mimetypes.

how can I install Porteus to a partition on a hard drive?
The same way as installing on a USB device except you DON'T want to run the Porteus-installer script. This will wipe the boot record and only porteus will boot. If you already have a bootloader in place just tweak the config file to add Porteus.

Must have been a fanthom tweak. Probably a bash script named init that guest can access.
I can find no such script in v3.1. I will add it to the next release. It at least gives a sane message.

I install this old file "p7zip-9.20.1-x86_64-1_slack.txz" and converted it to "p7zip-9.20.1-x86_64-1_slack.xzm"

Thanks Jack. We have version 15.14.1 installed. Seems like a huge downgrade but I will check out if it breaks anything else.

as developer of xorriso i have to nitpick that it is not the size of the ISO but the existence of empty files which makes mkisofs output indigestible for 7z.

Thanks for stopping by, and thanks for the detailed info. Not nit picky at all. In fact this helps to understand a lot more.

Hi Francois. I think there will be an rc4 since I have made some quite substantial changes since rc3. At rc4 the base will be frozen and only bugfixes considered.

Thanks to all.
How do i become super user?
Wear your underpants on the outside and put on a cape.

Locked