Porteus-v3.2rc3 Bug Reports

Please reproduce your error on a second machine before posting, and check the error by running without saved changes or extra modules (See FAQ No. 13, "How to report a bug"). For unstable Porteus versions (alpha, beta, rc) please use the relevant thread in our "Development" section.
donald
Full of knowledge
Full of knowledge
Posts: 1159
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

Re: Porteus-v3.2rc3 Bug Reports

Post#16 by donald » 09 Jun 2016, 21:16

@ Blaze
--> nvidia driver <--
maybe this can help to build the driver:
https://lists.opensuse.org/opensuse-fac ... 00072.html

I used a similar Patch for 304.xx
Re: NVIDIA driver Setup (Post by donald #46042)
and it compiled on 3.2rc3
good luck

northpeter1954
White ninja
White ninja
Posts: 7
Joined: 09 Jul 2014, 08:33
Distribution: mepis
Location: Havering

Re: Porteus-v3.2rc3 Bug Reports

Post#17 by northpeter1954 » 10 Jun 2016, 08:09

I have access to two types of PC
1) "always fresh" Intel HD 440:
--- twice (out of >10 tests) "Cinnamon has crashed"; then comes back cleanly;
--- Rc2 was unconditionally stable

2) "always fresh" Radeon 550:
--- Rc2 always looped "Cinnamon has crashed", 2x1280x1020 mode;
---- ctrl-alt-F1 produces fast scroll of stack crashes - 3 entries per crash(is there any way to capture these?)
--- Rc3 "stable" - but claims to be 2x1280x1020 mode though It compresses the screens into the left always 2/3, pixels dropped so that menu only displays "ly" out of ?"Settings Display";
---- mouse tracks "correct" offset, so mouse icon is nowhere near what is highlighted by roll-over for right half of display - basically unusable - (works better if I close my eyes)
---- Any attempt to set display causes hair raising graphics effects which would have blown a glass tub apart
--- ctrl-alt-F1 produces fast scroll of error messages (is there any way to capture these?)

"always fresh" XFCE, Mate "no mixer element found" and SLOW scroll of error messages on ctrl-alt-F1

Two really basic questions...

A)What is the FIRST IPL we should do to "install" Porteus RC3 ?
-- is there (should there be) an "always fresh poll hardware" option that LOGS EVERYTHING we need for problem determination for hardware incompatibilities

B)in the absence of A) what are the set of logs best suited for i) Display Errors; ii) Sound Errors; iii) network errors (not that I have had any ... but ideas would be welcome) ?

all this is a surprise for me, I never had problems with Porteus 3 or 3.1 or Nemesis (apart from missing Config files on Nemesis) - the lack of such installation issues has always been the attraction of Porteus :shock:

Bogomips
Full of knowledge
Full of knowledge
Posts: 2540
Joined: 25 Jun 2014, 15:21
Distribution: 3.2.2 Cinnamon & KDE5
Location: London

Re: Porteus-v3.2rc3 Bug Reports

Post#18 by Bogomips » 10 Jun 2016, 11:20

Hi
I'll mention it just in case you don't, but I'm guessing you should already know about /var/log directory.
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB

User avatar
Blaze
Moderator
Moderator
Posts: 1384
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#19 by Blaze » 10 Jun 2016, 17:52

Thanks donald for your patch and howto.
I have done nVidia-340.96-patched-porteus-v3.2rc3-x86_64.xzm

Code: Select all

.
├── etc
│   ├── OpenCL
│   │   └── vendors
│   │       └── nvidia.icd
│   ├── X11
│   │   └── xorg.conf
│   ├── modprobe.d
│   │   └── nvidia-installer-disable-nouveau.conf
│   └── rc.d
│       └── rcS.d
│           └── S99-nVidia
├── lib
│   └── modules
│       └── 4.6.1-porteus
│           └── kernel
│               └── drivers
│                   └── video
│                       ├── nvidia-uvm.ko
│                       └── nvidia.ko
└── usr
    ├── bin
    │   ├── nvidia-bug-report.sh
    │   ├── nvidia-cuda-mps-control
    │   ├── nvidia-cuda-mps-server
    │   ├── nvidia-debugdump
    │   ├── nvidia-installer
    │   ├── nvidia-modprobe
    │   ├── nvidia-persistenced
    │   ├── nvidia-settings
    │   ├── nvidia-smi
    │   ├── nvidia-uninstall -> nvidia-installer
    │   └── nvidia-xconfig
    ├── lib
    │   ├── libEGL.so -> libEGL.so.1
    │   ├── libEGL.so.1 -> libEGL.so.340.96
    │   ├── libEGL.so.340.96
    │   ├── libGL.la
    │   ├── libGL.so -> libGL.so.1
    │   ├── libGL.so.1 -> libGL.so.340.96
    │   ├── libGL.so.340.96
    │   ├── libGLESv1_CM.so -> libGLESv1_CM.so.1
    │   ├── libGLESv1_CM.so.1 -> libGLESv1_CM.so.340.96
    │   ├── libGLESv1_CM.so.340.96
    │   ├── libGLESv2.so -> libGLESv2.so.2
    │   ├── libGLESv2.so.2 -> libGLESv2.so.340.96
    │   ├── libGLESv2.so.340.96
    │   ├── libOpenCL.so -> libOpenCL.so.1
    │   ├── libOpenCL.so.1 -> libOpenCL.so.1.0
    │   ├── libOpenCL.so.1.0 -> libOpenCL.so.1.0.0
    │   ├── libOpenCL.so.1.0.0
    │   ├── libcuda.so -> libcuda.so.1
    │   ├── libcuda.so.1 -> libcuda.so.340.96
    │   ├── libcuda.so.340.96
    │   ├── libnvcuvid.so -> libnvcuvid.so.1
    │   ├── libnvcuvid.so.1 -> libnvcuvid.so.340.96
    │   ├── libnvcuvid.so.340.96
    │   ├── libnvidia-compiler.so.340.96
    │   ├── libnvidia-eglcore.so.340.96
    │   ├── libnvidia-encode.so -> libnvidia-encode.so.1
    │   ├── libnvidia-encode.so.1 -> libnvidia-encode.so.340.96
    │   ├── libnvidia-encode.so.340.96
    │   ├── libnvidia-fbc.so -> libnvidia-fbc.so.1
    │   ├── libnvidia-fbc.so.1 -> libnvidia-fbc.so.340.96
    │   ├── libnvidia-fbc.so.340.96
    │   ├── libnvidia-glcore.so.340.96
    │   ├── libnvidia-glsi.so.340.96
    │   ├── libnvidia-ifr.so -> libnvidia-ifr.so.1
    │   ├── libnvidia-ifr.so.1 -> libnvidia-ifr.so.340.96
    │   ├── libnvidia-ifr.so.340.96
    │   ├── libnvidia-ml.so -> libnvidia-ml.so.1
    │   ├── libnvidia-ml.so.1 -> libnvidia-ml.so.340.96
    │   ├── libnvidia-ml.so.340.96
    │   ├── libnvidia-opencl.so.1 -> libnvidia-opencl.so.340.96
    │   ├── libnvidia-opencl.so.340.96
    │   ├── libnvidia-tls.so.340.96
    │   ├── libvdpau_nvidia.so -> vdpau/libvdpau_nvidia.so.340.96
    │   └── vdpau
    │       ├── libvdpau_nvidia.so.1 -> libvdpau_nvidia.so.340.96
    │       └── libvdpau_nvidia.so.340.96
    ├── lib64
    │   ├── libEGL.so -> libEGL.so.1
    │   ├── libEGL.so.1 -> libEGL.so.340.96
    │   ├── libEGL.so.340.96
    │   ├── libGL.la
    │   ├── libGL.so -> libGL.so.1
    │   ├── libGL.so.1 -> libGL.so.340.96
    │   ├── libGL.so.340.96
    │   ├── libGLESv1_CM.so -> libGLESv1_CM.so.1
    │   ├── libGLESv1_CM.so.1 -> libGLESv1_CM.so.340.96
    │   ├── libGLESv1_CM.so.340.96
    │   ├── libGLESv2.so -> libGLESv2.so.2
    │   ├── libGLESv2.so.2 -> libGLESv2.so.340.96
    │   ├── libGLESv2.so.340.96
    │   ├── libOpenCL.so -> libOpenCL.so.1
    │   ├── libOpenCL.so.1 -> libOpenCL.so.1.0
    │   ├── libOpenCL.so.1.0 -> libOpenCL.so.1.0.0
    │   ├── libOpenCL.so.1.0.0
    │   ├── libXvMCgallium.so.1 -> libXvMCr600.so.1.0.0
    │   ├── libcuda.so -> libcuda.so.1
    │   ├── libcuda.so.1 -> libcuda.so.340.96
    │   ├── libcuda.so.340.96
    │   ├── libncurses.so.5 -> libcurses.so
    │   ├── libncursesw.so.5 -> libcursesw.so
    │   ├── libnvcuvid.so -> libnvcuvid.so.1
    │   ├── libnvcuvid.so.1 -> libnvcuvid.so.340.96
    │   ├── libnvcuvid.so.340.96
    │   ├── libnvidia-cfg.so -> libnvidia-cfg.so.1
    │   ├── libnvidia-cfg.so.1 -> libnvidia-cfg.so.340.96
    │   ├── libnvidia-cfg.so.340.96
    │   ├── libnvidia-compiler.so.340.96
    │   ├── libnvidia-eglcore.so.340.96
    │   ├── libnvidia-encode.so -> libnvidia-encode.so.1
    │   ├── libnvidia-encode.so.1 -> libnvidia-encode.so.340.96
    │   ├── libnvidia-encode.so.340.96
    │   ├── libnvidia-fbc.so -> libnvidia-fbc.so.1
    │   ├── libnvidia-fbc.so.1 -> libnvidia-fbc.so.340.96
    │   ├── libnvidia-fbc.so.340.96
    │   ├── libnvidia-glcore.so.340.96
    │   ├── libnvidia-glsi.so.340.96
    │   ├── libnvidia-ifr.so -> libnvidia-ifr.so.1
    │   ├── libnvidia-ifr.so.1 -> libnvidia-ifr.so.340.96
    │   ├── libnvidia-ifr.so.340.96
    │   ├── libnvidia-ml.so -> libnvidia-ml.so.1
    │   ├── libnvidia-ml.so.1 -> libnvidia-ml.so.340.96
    │   ├── libnvidia-ml.so.340.96
    │   ├── libnvidia-opencl.so.1 -> libnvidia-opencl.so.340.96
    │   ├── libnvidia-opencl.so.340.96
    │   ├── libnvidia-tls.so.340.96
    │   ├── libudev.so.1 -> libudev.so.0
    │   ├── libvdpau_nvidia.so -> vdpau/libvdpau_nvidia.so.340.96
    │   ├── tls
    │   │   └── libnvidia-tls.so.340.96
    │   ├── vdpau
    │   │   ├── libvdpau_nvidia.so.1 -> libvdpau_nvidia.so.340.96
    │   │   └── libvdpau_nvidia.so.340.96
    │   └── xorg
    │       └── modules
    │           ├── drivers
    │           │   └── nvidia_drv.so
    │           ├── extensions
    │           │   ├── libglx.so -> libglx.so.340.96
    │           │   └── libglx.so.340.96
    │           ├── libnvidia-wfb.so.1 -> libnvidia-wfb.so.340.96
    │           └── libnvidia-wfb.so.340.96
    └── share
        ├── applications
        │   └── nvidia-settings.desktop
        ├── doc
        │   └── NVIDIA_GLX-1.0
        │       ├── LICENSE
        │       ├── NVIDIA_Changelog
        │       ├── README.txt
        │       ├── html
        │       │   ├── acknowledgements.html
        │       │   ├── addressingcapabilities.html
        │       │   ├── addtlresources.html
        │       │   ├── appendices.html
        │       │   ├── audiosupport.html
        │       │   ├── commonproblems.html
        │       │   ├── configlaptop.html
        │       │   ├── configmultxscreens.html
        │       │   ├── configtvout.html
        │       │   ├── configtwinview.html
        │       │   ├── depth30.html
        │       │   ├── displaydevicenames.html
        │       │   ├── dma_issues.html
        │       │   ├── dpi.html
        │       │   ├── editxconfig.html
        │       │   ├── faq.html
        │       │   ├── flippingubb.html
        │       │   ├── framelock.html
        │       │   ├── glxsupport.html
        │       │   ├── gpunames.html
        │       │   ├── i2c.html
        │       │   ├── index.html
        │       │   ├── installationandconfiguration.html
        │       │   ├── installdriver.html
        │       │   ├── installedcomponents.html
        │       │   ├── introduction.html
        │       │   ├── knownissues.html
        │       │   ├── minimumrequirements.html
        │       │   ├── newusertips.html
        │       │   ├── nvidia-debugdump.html
        │       │   ├── nvidia-ml.html
        │       │   ├── nvidia-persistenced.html
        │       │   ├── nvidia-smi.html
        │       │   ├── nvidiasettings.html
        │       │   ├── openglenvvariables.html
        │       │   ├── optimus.html
        │       │   ├── powermanagement.html
        │       │   ├── procinterface.html
        │       │   ├── profiles.html
        │       │   ├── programmingmodes.html
        │       │   ├── randr14.html
        │       │   ├── sdi.html
        │       │   ├── selectdriver.html
        │       │   ├── sli.html
        │       │   ├── supportedchips.html
        │       │   ├── vdpausupport.html
        │       │   ├── xcompositeextension.html
        │       │   ├── xconfigoptions.html
        │       │   ├── xineramaglx.html
        │       │   └── xrandrextension.html
        │       ├── nvidia-settings.png
        │       └── sample
        │           └── nvidia-persistenced-init.tar.bz2
        ├── man
        │   └── man1
        │       ├── nvidia-cuda-mps-control.1.gz
        │       ├── nvidia-installer.1.gz
        │       ├── nvidia-modprobe.1.gz
        │       ├── nvidia-persistenced.1.gz
        │       ├── nvidia-settings.1.gz
        │       ├── nvidia-smi.1.gz
        │       └── nvidia-xconfig.1.gz
        └── nvidia
            ├── monitoring.conf
            ├── nvidia-application-profiles-340.96-key-documentation
            ├── nvidia-application-profiles-340.96-rc
            └── pci.ids

33 directories, 187 files

Code: Select all

root@porteus:~# uname -r
4.6.1-porteus
root@porteus:~# grep -i nvidia /var/log/Xorg.0.log
[     7.180] (II) Module glx: vendor="NVIDIA Corporation"
[     7.189] (II) NVIDIA GLX Module  340.96  Sun Nov  8 22:06:18 PST 2015
[     7.189] (II) LoadModule: "nvidia"
[     7.189] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[     7.299] (II) Module nvidia: vendor="NVIDIA Corporation"
[     7.324] (II) NVIDIA dlloader X Driver  340.96  Sun Nov  8 21:46:28 PST 2015
[     7.324] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     7.392] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     7.392] (==) NVIDIA(0): RGB weight 888
[     7.392] (==) NVIDIA(0): Default visual is TrueColor
[     7.392] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.392] (**) NVIDIA(0): Enabling 2D acceleration
[     8.268] (II) NVIDIA(0): Display (Samsung S24E500 (CRT-1)) does not support NVIDIA 3D
[     8.268] (II) NVIDIA(0):     Vision stereo.
[     8.268] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[     8.270] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[     8.270] (--) NVIDIA(0): Memory: 524288 kBytes
[     8.270] (--) NVIDIA(0): VideoBIOS: 60.84.41.00.00
[     8.270] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     8.274] (--) NVIDIA(0): Valid display device(s) on GeForce 8600 GT at PCI:1:0:0
[     8.274] (--) NVIDIA(0):     CRT-0
[     8.274] (--) NVIDIA(0):     Samsung S24E500 (CRT-1) (boot, connected)
[     8.274] (--) NVIDIA(0):     TV-0
[     8.274] (--) NVIDIA(0):     DFP-0
[     8.274] (--) NVIDIA(0):     DFP-1
[     8.274] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     8.274] (--) NVIDIA(GPU-0): Samsung S24E500 (CRT-1): 400.0 MHz maximum pixel clock
[     8.274] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[     8.274] (--) NVIDIA(0): DFP-0: Internal TMDS
[     8.274] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     8.274] (--) NVIDIA(0): DFP-1: Internal TMDS
[     8.274] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[     8.274] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     8.274] (**) NVIDIA(0):     device Samsung S24E500 (CRT-1) (Using EDID frequencies has
[     8.274] (**) NVIDIA(0):     been enabled on all display devices.)
[     8.275] (==) NVIDIA(0): 
[     8.275] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     8.275] (==) NVIDIA(0):     will be used as the requested mode.
[     8.275] (==) NVIDIA(0): 
[     8.276] (II) NVIDIA(0): Validated MetaModes:
[     8.276] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[     8.276] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     8.303] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[     8.303] (--) NVIDIA(0):     option
[     8.303] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[     8.319] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[     8.437] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.437] (==) NVIDIA(0): Backing store enabled
[     8.437] (==) NVIDIA(0): Silken mouse enabled
[     8.437] (**) NVIDIA(0): DPMS enabled
[     8.438] (II) NVIDIA(0): [DRI2] Setup complete
[     8.438] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    11.428] (II) NVIDIA(GPU-0): Display (Samsung S24E500 (CRT-1)) does not support NVIDIA 3D
[    11.428] (II) NVIDIA(GPU-0):     Vision stereo.
[  1190.432] (II) NVIDIA(GPU-0): Display (Samsung S24E500 (CRT-1)) does not support NVIDIA 3D
[  1190.432] (II) NVIDIA(GPU-0):     Vision stereo.
root@porteus:~#
It work for me fine.

About sad :( :( :(
Cinnamon rc3 (+rc2) and KDE5 rc3 still unstable for me :wall:
Anybody knows how to fix it? BTW I remember that Cinnamon rc1 is worked for me.
They are (Cinnamon and KDE5) does not boot up with my nVidia-340.96-patched-porteus-v3.2rc3-x86_64.xzm driver.

Log of Cinnamon rc3 with my nVidia-340.96-patched-porteus-v3.2rc3-x86_64.xzm driver

Code: Select all

root@porteus: startx
xauth:  file /root/.serverauth.869 does not exist
xauth:  file /root/.Xauthority does not exist
xauth:  file /root/.Xauthority does not exist


X.Org X Server 1.18.3
Release Date: 2016-04-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 14.2 Slackware Linux Project
Current Operating System: Linux porteus 4.6.1-porteus #1 SMP PREEMPT Fri Jun 3 00:10:16 BRT 2016 x86_64
Kernel command line: quiet initrd=initrd.xz 3 timezone=Europe/Moscow volume=100% kmap=us,ru login=root BOOT_IMAGE=vmlinuz 
Build Date: 15 April 2016  11:05:21AM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 10 19:43:15 2016
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
cinnamon-session[920]: WARNING: t+0.21598s: AT-SPI: Could not obtain desktop path or name

cinnamon-session[920]: WARNING: t+0.22326s: atk-bridge: GetRegisteredEvents returned message with unknown signature
cinnamon-session[920]: WARNING: t+0.22335s: atk-bridge: get_device_events_reply: unknown signature
cinnamon-session[920]: WARNING: t+0.22340s: atk-bridge: get_device_events_reply: unknown signature
GNOME_KEYRING_CONTROL=/root/.cache/keyring-D6GTIY
GPG_AGENT_INFO=/root/.cache/keyring-D6GTIY/gpg:0:1
GNOME_KEYRING_CONTROL=/root/.cache/keyring-D6GTIY
GPG_AGENT_INFO=/root/.cache/keyring-D6GTIY/gpg:0:1
GNOME_KEYRING_CONTROL=/root/.cache/keyring-D6GTIY
GPG_AGENT_INFO=/root/.cache/keyring-D6GTIY/gpg:0:1
SSH_AUTH_SOCK=/root/.cache/keyring-D6GTIY/ssh
GNOME_KEYRING_CONTROL=/root/.cache/keyring-D6GTIY
GPG_AGENT_INFO=/root/.cache/keyring-D6GTIY/gpg:0:1
SSH_AUTH_SOCK=/root/.cache/keyring-D6GTIY/ssh

** (cinnamon-settings-daemon:939): WARNING **: /usr/lib64/cinnamon-settings-daemon-3.0/libxsettings.so: undefined symbol: gdk_screen_get_monitor_scale_factor

** (cinnamon-settings-daemon:939): WARNING **: Cannot load plugin 'X Settings' since file '/usr/lib64/cinnamon-settings-daemon-3.0/libxsettings.so' cannot be read.

** (cinnamon-settings-daemon:939): WARNING **: Error activating plugin 'X Settings'
=== xinerama setup Configuration ===
  Clone: false
  Output: (null) attached to DVI-I-0
     status: off
     width: -1
     height: -1
     rate: -1
     primary: true
     position: -1 -1
  Output: SAMSUNG 23" attached to DVI-I-1
     status: on
     width: 1920
     height: 1080
     rate: 60
     primary: false
     position: 0 0
  Output: (null) attached to TV-0
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DVI-I-2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DVI-I-3
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
=== Applying Configuration Configuration ===
  Clone: false
  Output: (null) attached to DVI-I-0
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: SAMSUNG 23" attached to DVI-I-1
     status: on
     width: 1920
     height: 1080
     rate: 60
     primary: true
     position: 0 0
  Output: (null) attached to TV-0
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DVI-I-2
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: (null) attached to DVI-I-3
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1

(cinnamon-settings-daemon:939): power-plugin-WARNING **: Unable to inhibit suspend: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.login1 was not provided by any .service files

(cinnamon-settings-daemon:939): power-plugin-WARNING **: Unable to inhibit lid switch: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.login1 was not provided by any .service files

(cinnamon-settings-daemon:939): media-keys-plugin-WARNING **: Unable to inhibit keypresses: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.login1 was not provided by any .service files

** (cinnamon-settings-daemon:939): WARNING **: AT-SPI: Could not obtain desktop path or name


** (cinnamon-settings-daemon:939): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (cinnamon-settings-daemon:939): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-settings-daemon:939): WARNING **: atk-bridge: get_device_events_reply: unknown signature
[1465577000,000,xklavier.c:xkl_engine_start_listen/] 	The backend does not require manual layout management - but it is provided by the application
cinnamon: symbol lookup error: /usr/lib64/libmuffin.so.0: undefined symbol: gdk_x11_display_set_window_scale
metacity: symbol lookup error: metacity: undefined symbol: gdk_x11_display_set_window_scale

** (cinnamon-launcher:1095): WARNING **: AT-SPI: Could not obtain desktop path or name


** (cinnamon-launcher:1095): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (cinnamon-launcher:1095): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-launcher:1095): WARNING **: atk-bridge: get_device_events_reply: unknown signature
cinnamon: symbol lookup error: /usr/lib64/libmuffin.so.0: undefined symbol: gdk_x11_display_set_window_scale

** (cinnamon-launcher:1095): WARNING **: AT-SPI: Could not obtain desktop path or name


** (cinnamon-launcher:1095): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (cinnamon-launcher:1095): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-launcher:1095): WARNING **: atk-bridge: get_device_events_reply: unknown signature
metacity: symbol lookup error: metacity: undefined symbol: gdk_x11_display_set_window_scale
ALSA lib control.c:843:(snd_ctl_open_conf) Invalid type for CTL default definition
amixer: Mixer attach default error: Invalid argument
Initializing nemo-image-converter extension
Failed to play sound: File or data not found

** (cinnamon-killer-daemon:1351): WARNING **: AT-SPI: Could not obtain desktop path or name


** (cinnamon-killer-daemon:1351): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (cinnamon-killer-daemon:1351): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-killer-daemon:1351): WARNING **: atk-bridge: get_device_events_reply: unknown signature
Traceback (most recent call last):
  File "/usr/bin/blueman-applet", line 19, in <module>
    from gi.repository import Gdk
  File "/usr/lib64/python2.7/site-packages/gi/importer.py", line 115, in load_module
  File "/usr/lib64/python2.7/site-packages/gi/overrides/__init__.py", line 125, in load_overrides
  File "/usr/lib64/python2.7/importlib/__init__.py", line 37, in import_module
  File "/usr/lib64/python2.7/site-packages/gi/overrides/Gdk.py", line 169, in <module>
  File "/usr/lib64/python2.7/site-packages/gi/module.py", line 168, in __getattr__
ValueError: invalid enum value: 42

** (nm-applet:1350): WARNING **: AT-SPI: Could not obtain desktop path or name


** (nm-applet:1350): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (nm-applet:1350): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (nm-applet:1350): WARNING **: atk-bridge: get_device_events_reply: unknown signature
In Cinnamon rc3 - 23 missing dependencies:

Code: Select all

libQtCore.so.4 => not found
Required by: automoc4-0.9.88-x86_64-1 (/usr/bin/automoc4)

libQtGui.so.4 => not found
libQtCore.so.4 => not found
Required by: cmake-3.5.2-x86_64-1 (/usr/bin/cmake-gui)

libgtk-1.2.so.0 => not found
libgdk-1.2.so.0 => not found
libgmodule-1.2.so.0 => not found
libglib-1.2.so.0 => not found
libxmms.so.1 => not found
Required by: flac-1.3.1-x86_64-1 (/usr/lib64/xmms/Input/libxmms-flac.so)

libgcj.so.16 => not found
Required by: gettext-tools-0.19.6-x86_64-1 (/usr/lib64/gettext/gnu.gettext.DumpResource)

libgcj.so.16 => not found
Required by: gettext-tools-0.19.6-x86_64-1 (/usr/lib64/gettext/gnu.gettext.GetURL)

libtcl8.6.so => not found
Required by: newt-0.52.19-x86_64-1 (/usr/lib64/whiptcl.so)

libboost_program_options.so.1.59.0 => not found
Required by: pamixer-1.3.1-x86_64-1 (/usr/bin/pamixer)

libmysqlclient.so.18 => not found
Required by: perl-5.22.2-x86_64-1 (/usr/lib64/perl5/vendor_perl/auto/DBD/mysql/mysql.so)

libQtGui.so.4 => not found
libQtXml.so.4 => not found
libQtCore.so.4 => not found
Required by: poppler-0.44.0-x86_64-1 (/usr/lib64/libpoppler-qt4.so.4.9.0)

libtk8.6.so => not found
libtcl8.6.so => not found
Required by: python-2.7.11-x86_64-2 (/usr/lib64/python2.7/lib-dynload/_tkinter.so)

libtcl8.6.so => not found
libtk8.6.so => not found
Required by: python-pillow-3.0.0-x86_64-1 (/usr/lib64/python2.7/site-packages/PIL/_imagingtk.so)

libgimpui-2.0.so.0 => not found
libgimpwidgets-2.0.so.0 => not found
libgimpmodule-2.0.so.0 => not found
libgimp-2.0.so.0 => not found
libgimpmath-2.0.so.0 => not found
libgimpconfig-2.0.so.0 => not found
libgimpcolor-2.0.so.0 => not found
libgimpbase-2.0.so.0 => not found
Required by: sane-1.0.25-x86_64-2 (/usr/bin/xscanimage)

libnetsnmp.so.30 => not found
Required by: sane-1.0.25-x86_64-2 (/usr/lib64/sane/libsane-magicolor.so.1.0.25)

libQtOpenGL.so.4 => not found
libQtGui.so.4 => not found
libQtCore.so.4 => not found
Required by: v4l-utils-1.10.0-x86_64-1 (/usr/bin/qv4l2)

####################################


Missing dependencies: 23

libQtCore.so.4
libQtGui.so.4
libQtOpenGL.so.4
libQtXml.so.4
libboost_program_options.so.1.59.0
libgcj.so.16
libgdk-1.2.so.0
libgimp-2.0.so.0
libgimpbase-2.0.so.0
libgimpcolor-2.0.so.0
libgimpconfig-2.0.so.0
libgimpmath-2.0.so.0
libgimpmodule-2.0.so.0
libgimpui-2.0.so.0
libgimpwidgets-2.0.so.0
libglib-1.2.so.0
libgmodule-1.2.so.0
libgtk-1.2.so.0
libmysqlclient.so.18
libnetsnmp.so.30
libtcl8.6.so
libtk8.6.so
libxmms.so.1
_________________
1. I (as root user) try to update adobe flash player via script

Code: Select all

update-flash
but after extracting adobe flash player xzm module I dont found library of adobe flash player

Code: Select all

root@porteus:~# ls /root/Downloads/flashplayer-plugin-11.2.202.621-x86_64-1/usr/lib/mozilla/plugins/
root@porteus:~#
:shock:

2. With firefox I have a failure

Code: Select all

root@porteus:~# update-firefox
Checking internet ...
Downloading: update-firefox-live  DONE
Verifying archive integrity...  100%   All good.
Uncompressing Porteus browser updater  100%  
/usr/local/bin/update-firefox-live: line 496: ./update-firefox-live: Permission denied
root@porteus:~#
3. and update-wps-office with this error

Code: Select all

cp: cannot copy a directory, '/tmp/', into itself, '/tmp/.wps.8984/tmp'
ar: No error
tar: ../data.tar.xz: Cannot open: No such file or directory
full log

Code: Select all

root@porteus:~# update-wps-office
 Starting checks ... 
[OK] User is root.
[OK] Distro is Porteus
[OK] libbfd was found
[OK] libbfd was found
Downloading live script ...
Downloading: update-wps-office-live  DONE
Verifying archive integrity...  100%   All good.
Uncompressing Porteus updater  100%  

Getting latest version ...
Latest version: 

 Would you like to download the latest version? [y/n]
 Would you like to create a Porteus module? [y/n]
cp: cannot copy a directory, '/tmp/', into itself, '/tmp/.wps.8984/tmp'
ar: No error
tar: ../data.tar.xz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
Copying libpng ...

Slackware package maker, version 3.141593.

Searching for symbolic links:
usr/lib64/libpng14.so	libpng14.so.14.19.0
usr/lib64/libpng12.so.0	libpng12.so.0.56.0
usr/lib64/libpng.a	libpng14.a
usr/lib64/pkgconfig/libpng.pc	libpng14.pc
usr/lib64/libpng12.so	libpng12.so.0.56.0
usr/lib64/libpng.so.3	libpng.so.3.56.0
usr/lib64/libpng.so.14	libpng14.so.14
usr/lib64/libpng14.so.14	libpng14.so.14.19.0
usr/lib64/libpng.so	libpng14.so
usr/lib64/libpng.la	libpng14.la
usr/bin/libpng-config	libpng14-config

Making symbolic link creation script:
( cd usr/lib64 ; rm -rf libpng14.so )
( cd usr/lib64 ; ln -sf libpng14.so.14.19.0 libpng14.so )
( cd usr/lib64 ; rm -rf libpng12.so.0 )
( cd usr/lib64 ; ln -sf libpng12.so.0.56.0 libpng12.so.0 )
( cd usr/lib64 ; rm -rf libpng.a )
( cd usr/lib64 ; ln -sf libpng14.a libpng.a )
( cd usr/lib64/pkgconfig ; rm -rf libpng.pc )
( cd usr/lib64/pkgconfig ; ln -sf libpng14.pc libpng.pc )
( cd usr/lib64 ; rm -rf libpng12.so )
( cd usr/lib64 ; ln -sf libpng12.so.0.56.0 libpng12.so )
( cd usr/lib64 ; rm -rf libpng.so.3 )
( cd usr/lib64 ; ln -sf libpng.so.3.56.0 libpng.so.3 )
( cd usr/lib64 ; rm -rf libpng.so.14 )
( cd usr/lib64 ; ln -sf libpng14.so.14 libpng.so.14 )
( cd usr/lib64 ; rm -rf libpng14.so.14 )
( cd usr/lib64 ; ln -sf libpng14.so.14.19.0 libpng14.so.14 )
( cd usr/lib64 ; rm -rf libpng.so )
( cd usr/lib64 ; ln -sf libpng14.so libpng.so )
( cd usr/lib64 ; rm -rf libpng.la )
( cd usr/lib64 ; ln -sf libpng14.la libpng.la )
( cd usr/bin ; rm -rf libpng-config )
( cd usr/bin ; ln -sf libpng14-config libpng-config )

It is recommended that you make these lines your new installation script.

Would you like to make this stuff the install script for this package
and remove the symbolic links ([y]es, [n]o)? y


Removing symbolic links:
removed './usr/lib64/libpng14.so'
removed './usr/lib64/libpng12.so.0'
removed './usr/lib64/libpng.a'
removed './usr/lib64/pkgconfig/libpng.pc'
removed './usr/lib64/libpng12.so'
removed './usr/lib64/libpng.so.3'
removed './usr/lib64/libpng.so.14'
removed './usr/lib64/libpng14.so.14'
removed './usr/lib64/libpng.so'
removed './usr/lib64/libpng.la'
removed './usr/bin/libpng-config'

Creating your new ./install/doinst.sh...

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

WARNING: /tmp/.wps.8984/build is chmod 700
         temporarily changing to chmod 755
Creating Slackware package:  /tmp/wps-office--x86_64-1.txz

./
var/
var/log/
var/log/removed_scripts/
var/log/removed_packages/
var/log/packages/
var/log/packages/libpng-1.4.19-x86_64-1_slack14.1
var/log/scripts/
var/log/scripts/libpng-1.4.19-x86_64-1_slack14.1
var/log/setup/
var/log/setup/tmp/
usr/
usr/man/
usr/doc/
usr/lib64/
usr/lib64/pkgconfig/
usr/lib64/pkgconfig/libpng14.pc
usr/lib64/pkgconfig/libpng12.pc
usr/lib64/libpng12.la
usr/lib64/libpng12.so.0.56.0
usr/lib64/libpng14.a
usr/lib64/libpng14.so.14.19.0
usr/lib64/libpng12.a
usr/lib64/libpng.so.3.56.0
usr/lib64/libpng14.la
usr/bin/
usr/bin/libpng14-config
usr/bin/libpng12-config
install/
install/slack-desc
install/doinst.sh

Restoring permissions of /tmp/.wps.8984/build to chmod 700

Slackware package /tmp/wps-office--x86_64-1.txz created.

Verifying package wps-office--x86_64-1.txz.
Installing package wps-office--x86_64-1.txz:
PACKAGE DESCRIPTION:
# wps-office (wps-office)
#
# wps office document editor
#
# Home: http://wps-community.org/
Executing install script for wps-office--x86_64-1.txz.
Package wps-office--x86_64-1.txz installed.

Creating /tmp/wps-office--x86_64-1.xzm

root@porteus:~#
:wall: :wall: :wall:
Linux porteus 4.12.7-porteus #1 SMP PREEMPT Sun Aug 13 17:38:30 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#20 by brokenman » 11 Jun 2016, 03:37

@Evan
Mouse size not working.
Known problem. Try this:
gsettings set org.cinnamon.desktop.interface cursor-size 48
If you of another way I am all ears.

Shutdown and switch user button doesn't work
Can anyone confirm this. I've
been shutting down ok for weeks.

@ncmprhnsbl
no still no glx with radeon?
Sorry. Will add to next release.

duplicate packages?
Thanks. Just the /var/log/packages file is doubled

in xorg
xf86-video-nouveau-1.0.12-x86_64-1
xf86-video-nouveau-git_20151119_6e6d8ac-x86_64-1

Thanks.

@donald
If i choose the MediterraneanDarkest theme the cpu freq is jumping up and down
Noted.

Thunar > rightclick a xzm module we have "mount" but not " unmount"

Will check it out.
Noted.

There are some leftover files in /var/log/removed_packages/ and /var/log/removed_scripts/
Noted

Some files in /var/log/scripts/ have a music-icon -- properties = "Amiga Soundtracker audio" open with Audacious.???
Audacious has a rather aggresive .desktop file

@jmhoward56
cinnamon-menu-editor
alacarte

Thanks. Looking into it.

pamixer: error while loading shared libraries: libboost_program_options.so.1.59.0
Added to aaa_elflibs

xscanimage: error while loading shared libraries: libgimpui-2.0.so.0
Thanks. Recompiled sane.

@Ed_P
3.2
guest@porteus:~$ grep -A1 "Booting" /var/log/porteus-livedbg|tail -n1|sed 's^//^/^g'
/mnt/isoloop

Yes, this is more accurate.

@Bogomips
guiexec activation issue:
Noted. Confirmed.

@jimhoward56
This is more question relating to you upgrading cinnamon to 3.0.2. I noticed that you are not using the newer python3 which Willy Sudiarto is in his git. This is actually the first thing compiled. Could this possibly be reason some features such as cinnamon-menu-editor might be throwing the errors that it is?
Unfortunately no. Recompiled everything under python3 with no difference.

@Blaze
(cinnamon-settings-daemon:863): power-plugin-WARNING **: Unable to inhibit suspend:
After bumping cinnamon to 3.0.5 I am not getting this error anymore. I will upload the ISO for you to check if libxsettings.so is still giving problems.

Don't forget to replace v3.1 on v3.2
This was already done. Justed checked the ISO and the /etc/issue file in 001 is correct.

Bug report from ramd
Can you please get me the device details?

@northpeter1954
A)What is the FIRST IPL we should do to "install" Porteus RC3 ?
Not sure what you mean by this but i'll do my best. When booting the kernel is loaded followed by the initrd.xz which is uncompressed and then linuxrc is run from the ramdisk. You can locate this file after booting at /mnt/live/linuxrc
So I would call this the IPL. Placing the string "debug" on the boot command line allows you to pause the booting procedure at stages.

is there (should there be) an "always fresh poll hardware" option that LOGS EVERYTHING
There is nothing as such. Good idea however anything that would be gleaned is available in the /var/log path

After booting there is a script that collects all hardware info and automatically uploads it to pastebin where you can link to. This can be found in the Porteus Settings Cetnre.

the lack of such installation issues has always been the attraction of Porteus
Am I to understand that you had troubles installing porteus, or hardware issues that were apparent after booting?

@Blaze
Cinnamon rc3 (+rc2) and KDE5 rc3 still unstable for me
Both require hardware acceleration ad unfortunately I don't have access to an nvidia card for testing. Hopefully I will in around another month.

In Cinnamon rc3 - 23 missing dependencies:
There will always be some unresolved libraries as I don't want to pull in qt or gimp just to satisfy a non essential dep.

but after extracting adobe flash player xzm module I dont found library of adobe flash player
I just tested this on rc3 and it works fine. Flash library was located. Can anyone confirm? Also had no trouble with update-firefox or wps-office.
How do i become super user?
Wear your underpants on the outside and put on a cape.

User avatar
Ed_P
Contributor
Contributor
Posts: 3156
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus-v3.2rc3 Bug Reports

Post#21 by Ed_P » 11 Jun 2016, 05:12

brokenman wrote: @Ed_P
3.2
guest@porteus:~$ grep -A1 "Booting" /var/log/porteus-livedbg|tail -n1|sed 's^//^/^g'
/mnt/isoloop

Yes, this is more accurate.
Not according to this:

Code: Select all

guest@porteus:~$ ls /mnt/
live/  sda1/  sda2/  sda3/  sda5/  sda6/
guest@porteus:~$ su
Password: 
root@porteus:/home/guest# ls /mnt
live/  sda1/  sda2/  sda3/  sda5/  sda6/
root@porteus:/home/guest# 
Ed

Evan
Warlord
Warlord
Posts: 519
Joined: 11 Apr 2016, 09:00
Distribution: Anything Cinnamon
Location: London

Re: Porteus-v3.2rc3 Bug Reports

Post#22 by Evan » 11 Jun 2016, 08:19

<removed>
Last edited by Evan on 24 Jun 2016, 12:57, edited 1 time in total.

User avatar
Blaze
Moderator
Moderator
Posts: 1384
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#23 by Blaze » 11 Jun 2016, 10:31

brokenman wrote:Thunar > rightclick a xzm module we have "mount" but not " unmount"
Will check it out.
Noted.
I have done it and corrected icon for txz2xzm.
Ready variant here uca-tweak-by-baze.7z
Copy uca.xml to ~/.config/Thunar/
brokenman wrote:@Blaze
(cinnamon-settings-daemon:863): power-plugin-WARNING **: Unable to inhibit suspend:
After bumping cinnamon to 3.0.5 I am not getting this error anymore. I will upload the ISO for you to check if libxsettings.so is still giving problems.
Ok. Thanks.
brokenman wrote:Don't forget to replace v3.1 on v3.2
This was already done. Justed checked the ISO and the /etc/issue file in 001 is correct.
It's strange. I checked /etc/issue and 001-core.xzm and I have Welcome to Porteus v3.1
Image
brokenman wrote:Bug report from ramd
Can you please get me the device details?
I send your requisition to him.
brokenman wrote:@Blaze
Cinnamon rc3 (+rc2) and KDE5 rc3 still unstable for me
Both require hardware acceleration ad unfortunately I don't have access to an nvidia card for testing. Hopefully I will in around another month.
Yep. For it I done nVidia-340.96-patched-porteus-v3.2rc3-x86_64.xzm

Code: Select all

root@porteus:~# glxinfo | grep direct
direct rendering: Yes
    GL_EXT_depth_bounds_test, GL_EXT_direct_state_access, 
    GL_EXT_depth_bounds_test, GL_EXT_direct_state_access, 
root@porteus:~#
and stuck...

At this moment it's main problem for me. (about Cinnamon)
I know that I use old iron (about my pc ASUS P5KC LGA775 socket, 4GB (1x4GB) DDR3 1333 MHz, NVIDIA GeForce 8600 GT).
This summer I am planning to upgrade my PC at. I'll buy everything that I need at computeruniverse.net
If you have any recommendations (about configuration of my a new PC) let me know about them.
Thanks.
brokenman wrote:but after extracting adobe flash player xzm module I dont found library of adobe flash player
I just tested this on rc3 and it works fine. Flash library was located. Can anyone confirm? Also had no trouble with update-firefox or wps-office.
I'm recheck it today and yes, with flash player all ok, but update-firefox and update-wps-office does not work for me.
Linux porteus 4.12.7-porteus #1 SMP PREEMPT Sun Aug 13 17:38:30 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

Bogomips
Full of knowledge
Full of knowledge
Posts: 2540
Joined: 25 Jun 2014, 15:21
Distribution: 3.2.2 Cinnamon & KDE5
Location: London

Re: Porteus-v3.2rc3 Bug Reports

Post#24 by Bogomips » 11 Jun 2016, 11:23

brokenman wrote: @Bogomips
guiexec activation issue:
Noted. Confirmed.
Cannot activate at all in Cinnamon 32 bit using CLI :wall: Please refer to https://forum.porteus.org/viewtopic.php ... 928#p46175

@ Blaze
Think had been inadvertently running in rc2 without h/w acceleration:
  • /home/guest/.xinitrc

    Code: Select all

    exec cinnamon-session-cinnamon2d
    
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB

User avatar
Ed_P
Contributor
Contributor
Posts: 3156
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus-v3.2rc3 Bug Reports

Post#25 by Ed_P » 11 Jun 2016, 17:06

lspci command not working in Cinnamon 64 bit like it does in prior releases.

Code: Select all

guest@porteus:~$ lspci
bash: lspci: command not found
guest@porteus:~$ 
And a Boot Device of /mnt/isoloop/ without indicating from which physical device the iso is on is kinda useless. imo :(
And yes I know the full path is /mnt/live/mnt/isoloop, which doesn't help either.
Last edited by Ed_P on 11 Jun 2016, 20:03, edited 2 times in total.
Ed

Jack
Contributor
Contributor
Posts: 1063
Joined: 09 Aug 2013, 14:25
Distribution: Porteus 3.2.rc5 Mate 64 bit
Location: Marysville, OHIO USA

Re: Porteus-v3.2rc3 Bug Reports

Post#26 by Jack » 11 Jun 2016, 18:04

Ed_P wrote:lspci command not working.

Code: Select all

guest@porteus:~$ lspci
bash: lspci: command not found
guest@porteus:~$ 
And a Boot Device of /mnt/isoloop/ without indicating from which physical device the iso is on is kinda useless. imo :(
And yes I know the full path is /mnt/live/mnt/isoloop, which doesn't help either.
In Mate rc3 x86_64 here is my outoput.

Code: Select all

[code]guest@porteus:~$ lspci
bash: lspci: command not found
guest@porteus:~$ su
Password: 
root@porteus:/home/guest# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
root@porteus:/home/guest# 
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

Bogomips
Full of knowledge
Full of knowledge
Posts: 2540
Joined: 25 Jun 2014, 15:21
Distribution: 3.2.2 Cinnamon & KDE5
Location: London

Re: Porteus-v3.2rc3 Bug Reports

Post#27 by Bogomips » 11 Jun 2016, 18:57

Ed_P wrote:lspci command not working.

Code: Select all

guest@porteus:~$ ls /var/log/packages/cinn*
/var/log/packages/cinnamon-3.0.2-i586-1jay
...
guest@porteus:~$ /sbin/lspci                                                       
00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1)            
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)                   
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)                             
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)            
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)       
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)       
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)                   
...
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB

User avatar
Blaze
Moderator
Moderator
Posts: 1384
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Porteus-v3.2rc3 Bug Reports

Post#28 by Blaze » 11 Jun 2016, 19:12

Bogomips wrote:@ Blaze
Think had been inadvertently running in rc2 without h/w acceleration:
  • /home/guest/.xinitrc

    Code: Select all

    exec cinnamon-session-cinnamon2d
    
Thanks, but it does not help. Your advice tested in RC3 without nVidia driver.

Code: Select all

root@porteus: cat .xinitrc
exec cinnamon-session-cinnamon2d
root@porteus: startx
xauth:  file /root/.serverauth.1451 does not exist
xauth:  file /root/.Xauthority does not exist
xauth:  file /root/.Xauthority does not exist


X.Org X Server 1.18.3
Release Date: 2016-04-04
X Protocol Version 11, Revision 0
Build Operating System: Slackware 14.2 Slackware Linux Project
Current Operating System: Linux porteus 4.6.1-porteus #1 SMP PREEMPT Fri Jun 3 00:10:16 BRT 2016 x86_64
Kernel command line: quiet initrd=initrd.xz 3 timezone=Europe/Moscow volume=100% kmap=us,ru login=root BOOT_IMAGE=vmlinuz 
Build Date: 15 April 2016  11:05:21AM
 
Current version of pixman: 0.34.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 11 21:54:50 2016
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
resize called 1920 1080
cinnamon-session[1493]: WARNING: t+0.00449s: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
cinnamon-session[1493]: WARNING: t+0.16425s: AT-SPI: Could not obtain desktop path or name

cinnamon-session[1493]: WARNING: t+0.18122s: atk-bridge: GetRegisteredEvents returned message with unknown signature
cinnamon-session[1493]: WARNING: t+0.18139s: atk-bridge: get_device_events_reply: unknown signature
cinnamon-session[1493]: WARNING: t+0.18148s: atk-bridge: get_device_events_reply: unknown signature
GNOME_KEYRING_CONTROL=/root/.cache/keyring-ABRQIY
GNOME_KEYRING_CONTROL=/root/.cache/keyring-ABRQIY
GNOME_KEYRING_CONTROL=/root/.cache/keyring-ABRQIY
SSH_AUTH_SOCK=/root/.cache/keyring-ABRQIY/ssh
GNOME_KEYRING_CONTROL=/root/.cache/keyring-ABRQIY
SSH_AUTH_SOCK=/root/.cache/keyring-ABRQIY/ssh
GPG_AGENT_INFO=/root/.cache/keyring-ABRQIY/gpg:0:1
E: [autospawn] core-util.c: Home directory not accessible: Permission denied
W: [autospawn] lock-autospawn.c: Cannot access autospawn lock.
E: [pulseaudio] main.c: Failed to acquire autospawn lock

** (cinnamon-settings-daemon:1515): WARNING **: /usr/lib64/cinnamon-settings-daemon-3.0/libxsettings.so: undefined symbol: gdk_screen_get_monitor_scale_factor

** (cinnamon-settings-daemon:1515): WARNING **: Cannot load plugin 'Параметры системы X Window' since file '/usr/lib64/cinnamon-settings-daemon-3.0/libxsettings.so' cannot be read.

** (cinnamon-settings-daemon:1515): WARNING **: Error activating plugin 'Параметры системы X Window'
=== xinerama setup Configuration ===
  Clone: false
  Output: (null) attached to DVI-I-1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: SAMSUNG 23" attached to DVI-I-2
     status: on
     width: 1920
     height: 1080
     rate: 60
     primary: false
     position: 0 0
=== Applying Configuration Configuration ===
  Clone: false
  Output: (null) attached to DVI-I-1
     status: off
     width: -1
     height: -1
     rate: -1
     primary: false
     position: -1 -1
  Output: SAMSUNG 23" attached to DVI-I-2
     status: on
     width: 1920
     height: 1080
     rate: 60
     primary: true
     position: 0 0
resize called 1920 1080

(cinnamon-settings-daemon:1515): power-plugin-WARNING **: Unable to inhibit suspend: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.login1 was not provided by any .service files

(cinnamon-settings-daemon:1515): power-plugin-WARNING **: Unable to inhibit lid switch: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.login1 was not provided by any .service files
Home directory not accessible: Отказано в доступе

(cinnamon-settings-daemon:1515): media-keys-plugin-WARNING **: Unable to inhibit keypresses: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.login1 was not provided by any .service files

** (cinnamon-settings-daemon:1515): WARNING **: AT-SPI: Could not obtain desktop path or name


** (cinnamon-settings-daemon:1515): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (cinnamon-settings-daemon:1515): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-settings-daemon:1515): WARNING **: atk-bridge: get_device_events_reply: unknown signature
[1465671294,000,xklavier.c:xkl_engine_start_listen/]     The backend does not require manual layout management - but it is provided by the application
Home directory not accessible: Отказано в доступе

(cinnamon-settings-daemon:1515): Cvc-WARNING **: Failed to connect context: Connection refused

** (cinnamon-settings-daemon:1515): WARNING **: Failed to get session for pid: GDBus.Error:org.freedesktop.ConsoleKit.Manager.Error.General: Unable to lookup session information for process '1515'

** (cinnamon-settings-daemon:1515): WARNING **: Failed to get session for pid: GDBus.Error:org.freedesktop.ConsoleKit.Manager.Error.General: Unable to lookup session information for process '1515'

** (cinnamon-settings-daemon:1515): WARNING **: Failed to get session for pid: GDBus.Error:org.freedesktop.ConsoleKit.Manager.Error.General: Unable to lookup session information for process '1515'
cinnamon: symbol lookup error: /usr/lib64/libmuffin.so.0: undefined symbol: gdk_x11_display_set_window_scale
Home directory not accessible: Отказано в доступе

(cinnamon-settings-daemon:1515): Cvc-WARNING **: Failed to connect context: Connection refused
cinnamon-session[1493]: WARNING: t+32.17294s: Application 'cinnamon2d.desktop' failed to register before timeout
cinnamon-session[1493]: WARNING: t+32.17488s: Unable to determine session: Unable to lookup session information for process '1493'
cinnamon-session[1493]: CRITICAL: t+32.17497s: We failed, but the fail whale is dead. Sorry....
Home directory not accessible: Отказано в доступе
Initializing nemo-image-converter extension
Failed to play sound: Not available
Traceback (most recent call last):
  File "/usr/bin/blueman-applet", line 19, in <module>
    from gi.repository import Gdk
  File "/usr/lib64/python2.7/site-packages/gi/importer.py", line 115, in load_module

** (nm-applet:1914): WARNING **: AT-SPI: Could not obtain desktop path or name

  File "/usr/lib64/python2.7/site-packages/gi/overrides/__init__.py", line 125, in load_overrides
  File "/usr/lib64/python2.7/importlib/__init__.py", line 37, in import_module
  File "/usr/lib64/python2.7/site-packages/gi/overrides/Gdk.py", line 169, in <module>
  File "/usr/lib64/python2.7/site-packages/gi/module.py", line 168, in __getattr__
ValueError: invalid enum value: 42
ALSA lib control.c:843:(snd_ctl_open_conf) Invalid type for CTL default definition
amixer: Mixer attach default error: Invalid argument

** (cinnamon-killer-daemon:1916): WARNING **: AT-SPI: Could not obtain desktop path or name


** (cinnamon-killer-daemon:1916): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (cinnamon-killer-daemon:1916): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-killer-daemon:1916): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (nm-applet:1914): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (nm-applet:1914): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (nm-applet:1914): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-screensaver:2106): WARNING **: AT-SPI: Could not obtain desktop path or name


** (cinnamon-screensaver:2106): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature

** (cinnamon-screensaver:2106): WARNING **: atk-bridge: get_device_events_reply: unknown signature

** (cinnamon-screensaver:2106): WARNING **: atk-bridge: get_device_events_reply: unknown signature
(II) AIGLX: Suspending AIGLX clients for VT switch
^Cxinit: connection to X server lost


waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

xinit: unexpected signal 2
Linux porteus 4.12.7-porteus #1 SMP PREEMPT Sun Aug 13 17:38:30 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

User avatar
Ed_P
Contributor
Contributor
Posts: 3156
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus-v3.2rc3 Bug Reports

Post#29 by Ed_P » 11 Jun 2016, 19:37

Jack wrote: In Mate rc3 x86_64 here is my outoput.
duh!! :sorry: Yes, that works for me too.

Code: Select all

guest@porteus:~$ lspci
bash: lspci: command not found
guest@porteus:~$ su
Password: 
root@porteus:/home/guest# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6290]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
 :
 :
Thanks Jack. :beer:

:shock:

Code: Select all

guest@porteus:~$ /sbin/lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6290]
 :
 :
Without root privileges!! :shock:

Thanks Bogomips.


-but-


In Porteus 3.0.1

Code: Select all

guest@porteus:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6290]
00:01.1 Audio device.......
 :
 :
So I'm not as crazy as I thought. :no:

There are options in 3.2 Cinnamon to get the command to work but they aren't needed in prior release. I've updated my original report.
Ed

Bogomips
Full of knowledge
Full of knowledge
Posts: 2540
Joined: 25 Jun 2014, 15:21
Distribution: 3.2.2 Cinnamon & KDE5
Location: London

Re: Porteus-v3.2rc3 Bug Reports

Post#30 by Bogomips » 11 Jun 2016, 20:47

Blaze wrote:
Bogomips wrote:@ Blaze
Think had been inadvertently running in rc2 without h/w acceleration:
  • /home/guest/.xinitrc

    Code: Select all

    exec cinnamon-session-cinnamon2d
    
Thanks, but it does not help. Your advice tested in RC3 without nVidia driver.

Code: Select all

root@porteus: cat .xinitrc
exec cinnamon-session-cinnamon2d
root@porteus: startx
xauth:  file /root/.serverauth.1451 does not exist
xauth:  file /root/.Xauthority does not exist
xauth:  file /root/.Xauthority does not exist
@ Blaze
Am running in AF mode. So put in rootcopy dir: home/guest/.xinitrc. Boot Cinnamon as usual.
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB

Locked