Porteus Nemesis v3.5 BUG REPORTS

Arch based Porteus community project
User avatar
Ed_P
Contributor
Contributor
Posts: 3150
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#31 by Ed_P » 09 Jan 2016, 06:00

Ok, changed some of the USB drive's boot parms and now have these results.

The new notebook: EFI, grub2

This error msg when the DE appears, whether signing on as root or guest.

Code: Select all

Error

GDBus.Error:org.freedesktop.ConsoleKit.Manager.Error.General:
Unable to lookup session information for process '2121'
The mouse/touchpad does work. (Thank you kalo86)
The network functions do not work.

Code: Select all

guest ~ $ 
guest ~ $ su
Password: 
root /home/guest # psinfo
bash: psinfo: command not found
root /home/guest # pkill wpa_supplicant
root /home/guest # pkill netctl
root /home/guest # systemctl start NetworkManager
bash: systemctl: command not found
root /home/guest # exit
exit
guest ~ $
guest ~ $ sh /mnt/sdb1/bootdev.sh
Boot device:   /mnt/sdb1
Boot device format: "vfat" 
Boot folder:   /porteus/
Boot mode:     ISO /ISOs/porteus-nemesis-v3.5-lxde-x86_64.iso
OS:       Porteus-v3.4
ARCH:     x86_64
Kernel:   Linux porteus 4.3.3-porteus #1
Cmdline:  quiet BOOT_IMAGE=(loop)/boot/syslinux/vmlinuz from=/ISOs/porteus-nemesis-v3.5-lxde-x86_64.iso volume=33 reboot=cold 3
guest ~ $ 


-grub2-

menuentry "Porteus Nemesis 3.5 ISO" --class slackware   --class icon-linux  {
     echo Boot disk address is: $root
     echo Prefix is:            $prefix
     echo The boot mode is:     $grub2win_bootmode

     set iso=/ISOs/porteus-nemesis-v3.5-lxde-x86_64.iso

     search -f $iso --set=root 
     echo ISO root is:          $root
     echo ISO is:               $iso
     set porteus_parms="volume=33 reboot=cold 3"

     echo Porteus parms are:    $porteus_parms
     echo
     loopback loop $iso
     sleep -v -i 7 
     echo "Loading Linux" 
     linux (loop)/boot/syslinux/vmlinuz from=$iso $porteus_parms
     echo "Loading initrd"
     initrd (loop)/boot/syslinux/initrd.xz
}
And when signing on as root the task bar icons are not right.


Old netbook: BIOS, grub4dos

No error msg. :)
Mouse/touchpad working.
Network/Wi-Fi working :good:

Code: Select all

guest ~ $ sh /mnt/sdb1/bootdev.sh
Boot device:   /mnt/sda5
Boot device format: "ntfs" 
Boot folder:   /porteus3.x/
Boot mode:     ISO /ISOs/porteus-nemesis-v3.5-lxde-x86_64.iso
OS:       Porteus-v3.4
ARCH:     x86_64
Kernel:   Linux porteus 4.3.3-porteus #1
Cmdline:  quiet from=/ISOs/porteus-nemesis-v3.5-lxde-x86_64.iso   volume=40 reboot=cold ramsize=80%
guest ~ $ 


- grub4dos -

set ISOx=UP.Porteus-LXQT-v3.1-x86_64-nu.iso
set ISOy=porteus-nemesis-v3.5-lxde-x86_64.iso
set ISOz=Porteus-RazorQT-v3.0.1-x86_64-nu.iso

# menu entries

title Porteus 3.5 nemesis ISO     \n248MB\n %ISOy% 
find --set-root                       /ISOs/%ISOy%
map --heads=0 --sectors-per-track=0   /ISOs/%ISOy% (0xff) 
map --hook
root (0xff)
kernel /boot/syslinux/vmlinuz    from=/ISOs/%ISOy%   volume=40 reboot=cold ramsize=80%
initrd /boot/syslinux/initrd.xz
FYI My Porteus USB drive ISO booting scenario:

EFI system > /EFI/BOOT/bootx64.efi > /EFI/BOOT/refind.conf > /EFI/grub2win/grub2win.boot.efi > /grub2/grub.cfg > Porteus ISO
BIOS system > /boot/syslinux/porteus.cfg > /grldr > /menu.lst > Porteus ISO
Ed

aus9

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#32 by aus9 » 09 Jan 2016, 06:49

Ed

while brokenman is bound to supply a better reply...
systemctl start NetworkManager
We are now on openrc and for a normal bootup the network applet is already there and network is already running.

maybe

Code: Select all

openrc -h
Usage: openrc [options] [<runlevel>]

Options: [a:no:s:SChqVv]
  -a, --applet <arg>                runs the applet specified by the next argument
  -n, --no-stop                     do not stop any services
  -o, --override <arg>              override the next runlevel to change into
                                    when leaving single user or boot runlevels
  -s, --service <arg>               runs the service specified with the rest
                                    of the arguments
  -S, --sys                         output the RC system type, if any
  -h, --help                        Display this help output
  -C, --nocolor                     Disable color output
  -V, --version                     Display software version
  -v, --verbose                     Run verbosely
  -q, --quiet                       Run quietly (repeat to suppress errors)
might be useful?

nah I think this might be better?

Code: Select all

sudo setup-network

User avatar
Ed_P
Contributor
Contributor
Posts: 3150
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#33 by Ed_P » 09 Jan 2016, 06:51

aus9 wrote:Can you open a terminal and run

Code: Select all

lsmod | grep synaptics
I can now.

Code: Select all

guest ~ $ lsmod | grep synaptics
guest ~ $ lsmod | grep -e synaptics
guest ~ $ lsmod | grep -e mouse
guest ~ $ lsmod | grep -e pad
acpi_pad                4048  0
guest ~ $ lsmod | grep -e touch
hid_multitouch          7936  0
guest ~ $ lsmod | grep -e wireless
hp_wireless             1672  0
guest ~ $ lsmod | grep -e wifi
iwlwifi                84648  0
cfg80211              149992  2 wl,iwlwifi
firmware_class          5256  9 i915,iwlwifi,btbcm,btqca,btrtl,btusb,r8169,snd_hda_intel,hci_uart
guest ~ $ lsmod | grep -e eth
guest ~ $ lsmod | grep -e network
guest ~ $ 
Ed

User avatar
Ed_P
Contributor
Contributor
Posts: 3150
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#34 by Ed_P » 09 Jan 2016, 06:54

aus9 wrote:nah I think this might be better?

Code: Select all

sudo setup-network
Thanks aus9, I'll try it next time I boot the notebook.
Ed

aus9

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#35 by aus9 » 09 Jan 2016, 06:56

@roadie and brokenman

roadie's suggestion to resolve crashing of pcmanfm works well for inserting and clicking on usb stick and then clicking on eject.

for a data cd.....click on eject now also no longer crashes filemanager but for me....tray door still auto closes without giving me a chance to pull out cd.
But something new.....pressing hardware eject button now only needs to be pressed once.

Thanks roadie

roadie
Full of knowledge
Full of knowledge
Posts: 205
Joined: 02 Jan 2011, 18:41
Distribution: Porteus 3.5...with a twist
Location: In a hayfield

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#36 by roadie » 09 Jan 2016, 06:58

@Ed_P

Try this command from the console prompt when you boot to textmode on the new machine....comes from brokenman:
exec ck-launch-session dbus-launch startlxde

It looks like consolekit is not running....if you run "ck-list-sessions" from a terminal in X, it'll probably show nothing.

Nope, you won't find psinfo and for sure not systemctl on this release...I imported psinfo from an old Porteus...and mloop...handy lil programs.

For the net on the new machine, it's back to getting info....ifconfig...dmesg...lsmod....you know the drill.

aus9

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#37 by aus9 » 09 Jan 2016, 07:04

new minor bug discovered for lsusb

usb.ids seems to exist on system but the naming is not showing

Code: Select all

lsusb
Bus 004 Device 002: ID 8087:8001  
Bus 004 Device 001: ID 1d6b:0002  
Bus 003 Device 002: ID 8087:8009  
Bus 003 Device 001: ID 1d6b:0002  
Bus 002 Device 001: ID 1d6b:0003  
Bus 001 Device 002: ID 046d:c05a  
Bus 001 Device 009: ID 0bb4:0c02  
Bus 001 Device 003: ID 04d9:1605  
Bus 001 Device 001: ID 1d6b:0002
Also the ids on system could be updated?
Yours /usr/share/hwdata/usb.ids
# Version: 2015.03.31
# Date: 2015-03-31 20:34:09
a more recent can be found here
http://www.linux-usb.org/usb.ids
# Version: 2015.12.17
# Date: 2015-12-17 20:34:05
and yes my system applet says I am up todate

User avatar
Ed_P
Contributor
Contributor
Posts: 3150
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#38 by Ed_P » 09 Jan 2016, 07:06

setup-network and openrc produce nothing.

Actually that's not totally true. setup-networkmanager opens a NetworkManager TUI window.

The network icon in the system tray shows nothing but the About window. NetworkManager Applet 1.0.8. No network connection.
Ed

roadie
Full of knowledge
Full of knowledge
Posts: 205
Joined: 02 Jan 2011, 18:41
Distribution: Porteus 3.5...with a twist
Location: In a hayfield

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#39 by roadie » 09 Jan 2016, 07:21

Ed_P wrote:setup-network and openrc produce nothing.

Actually that's not totally true. setup-networkmanager opens a NetworkManager TUI window.

The network icon in the system tray shows nothing but the About window. NetworkManager Applet 1.0.8. No network connection.

From a terminal, run "NetworkManager"....setup-network won't work without NetworkManager running.

User avatar
Ed_P
Contributor
Contributor
Posts: 3150
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#40 by Ed_P » 09 Jan 2016, 07:32

roadie wrote:Try this command from the console prompt when you boot to textmode on the new machine....comes from brokenman:
exec ck-launch-session dbus-launch startlxde
Crap, I forgot to do this one. Sorry.
For the net on the new machine, it's back to getting info....ifconfig...dmesg...lsmod....you know the drill.
This part I did.

Code: Select all

root /home/guest # lsmod
Module                  Size  Used by
binfmt_misc             5336  1
wl                   6224988  0
iwlwifi                84648  0
hp_wmi                  5224  0
acer_wmi               10024  0
r8169                  47172  0
intel_rapl              7448  0
coretemp                4740  0
cfg80211              149992  2 wl,iwlwifi
kvm                   210841  0
snd_hda_codec_hdmi     26625  1
snd_hda_codec_realtek    43024  1
snd_hda_codec_generic    36032  1 snd_hda_codec_realtek
mii                     3072  1 r8169
crct10dif_pclmul        3264  0
crc32_pclmul            2048  0
snd_hda_intel          16384  1
crc32c_intel            7232  0
snd_hda_codec          56896  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
aesni_intel           139032  0
aes_x86_64              7040  1 aesni_intel
snd_hda_core           21576  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
lrw                     2816  1 aesni_intel
gf128mul                4736  1 lrw
snd_hwdep               3912  1 snd_hda_codec
glue_helper             3456  1 aesni_intel
snd_pcm                50192  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
hci_uart               18000  0
btusb                  21442  0
btrtl                   3328  1 btusb
btbcm                   4480  2 btusb,hci_uart
ablk_helper             1408  1 aesni_intel
i2c_i801                9164  0
cryptd                  4424  2 aesni_intel,ablk_helper
shpchp                 18502  0
input_leds              2432  0
snd_timer              13796  1 snd_pcm
btqca                   2816  1 hci_uart
hid_sensor_hub          5632  0
hid_multitouch          7936  0
i2c_hid                 8513  0
btintel                 2112  2 btusb,hci_uart
i915                  745824  3
wmi                     5698  2 acer_wmi,hp_wmi
intel_lpss_pci          2112  0
uvcvideo               54872  0
bluetooth             216185  7 btbcm,btqca,btrtl,btusb,hci_uart,btintel
videobuf2_vmalloc       2880  1 uvcvideo
videobuf2_memops        1216  1 videobuf2_vmalloc
videobuf2_core         23816  1 uvcvideo
rfkill                 10704  4 cfg80211,acer_wmi,hp_wmi,bluetooth
fan                     3328  0
fjes                   14464  0
hp_accel               16321  0
processor_thermal_device     4104  0
int3400_thermal         2752  0
int3403_thermal         1984  0
acpi_thermal_rel        3416  1 int3400_thermal
lis3lv02d               7872  1 hp_accel
intel_gtt               9024  1 i915
input_polldev           2304  1 lis3lv02d
hp_wireless             1672  0
firmware_class          5256  9 i915,iwlwifi,btbcm,btqca,btrtl,btusb,r8169,snd_hda_intel,hci_uart
intel_soc_dts_iosf      3136  1 processor_thermal_device
int3402_thermal         1344  0
iosf_mbi                2384  2 intel_soc_dts_iosf,intel_rapl
int340x_thermal_zone     2432  3 int3402_thermal,processor_thermal_device,int3403_thermal
intel_lpss_acpi         1472  0
intel_lpss              3536  2 intel_lpss_pci,intel_lpss_acpi
led_class               3016  3 hp_accel,acer_wmi,input_leds
acpi_pad                4048  0
mac_hid                 2772  0
efivarfs                4416  1
root /home/guest # ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether b0:5a:da:a9:1b:b9  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root /home/guest # dmesg > /mnt/sdb1/hpdmesg.txt
root /home/guest # 

These parts of dmesg look pertinent.

[    7.087186] DC6 already programmed to be disabled.
[    7.087187] Modules linked in: crct10dif_pclmul crc32_pclmul snd_hda_intel crc32c_intel snd_hda_codec ghash_clmulni_intel(-) aesni_intel aes_x86_64 snd_hda_core lrw gf128mul snd_hwdep glue_helper snd_pcm hci_uart btusb btrtl btbcm ablk_helper i2c_i801 cryptd shpchp input_leds snd_timer btqca hid_sensor_hub hid_multitouch i2c_hid btintel i915 wmi intel_lpss_pci uvcvideo bluetooth videobuf2_vmalloc videobuf2_memops videobuf2_core rfkill fan fjes hp_accel processor_thermal_device int3400_thermal int3403_thermal acpi_thermal_rel lis3lv02d intel_gtt input_polldev hp_wireless firmware_class intel_soc_dts_iosf int3402_thermal iosf_mbi int340x_thermal_zone intel_lpss_acpi intel_lpss led_class acpi_pad mac_hid efivarfs
[    7.087219] CPU: 2 PID: 63 Comm: kworker/2:1 Tainted: G        W       4.3.3-porteus #1
[    7.087220] Hardware name: HP HP Pavilion x360 Convertible/80D1, BIOS F.15 09/11/2015


[    7.136744] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.136751] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.136754] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.136755] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.136757] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.136759] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    7.136760] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    7.151298] snd_hda_intel 0000:00:1f.3: Too many HDMI devices
[    7.151301] snd_hda_intel 0000:00:1f.3: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[    7.152759] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    7.152832] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    7.152903] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    7.152971] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    7.153042] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    7.172706] kvm: disabled by bios
[    7.215668] intel_rapl: Found RAPL domain package
[    7.215672] intel_rapl: Found RAPL domain core
[    7.215676] intel_rapl: Found RAPL domain uncore
[    7.215679] intel_rapl: Found RAPL domain dram
[    7.465605] fbcon: inteldrmfb (fb0) is primary device
[    7.467933] acer_wmi: Acer Laptop ACPI-WMI Extras
[    7.468279] Intel(R) Wireless WiFi driver for Linux
[    7.468279] Copyright(c) 2003- 2015 Intel Corporation
[    7.468916] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.476404] r8169 0000:03:00.0 eth0: RTL8107e at 0xffffc900006a4000, b0:5a:da:a9:1b:b9, XID 14100800 IRQ 131
[    7.478129] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
[    7.478184] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-16.ucode failed with error -2
[    7.478230] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2
[    7.478274] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-14.ucode failed with error -2
[    7.478322] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2
[    7.478325] iwlwifi 0000:02:00.0: request for firmware file 'iwlwifi-7265D-13.ucode' failed.
[    7.478326] iwlwifi 0000:02:00.0: no suitable firmware found!
[    7.478712] iwlwifi 0000:02:00.0: Unsupported splx structure

Ed

aus9

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#41 by aus9 » 09 Jan 2016, 08:01

@Ed_P

bingo you need that firmware but its not there according to my eyesight

Code: Select all

find / -name iwlwifi-7265*
/mnt/live/memory/images/000-kernel.xzm/usr/lib/firmware/iwlwifi-7265-12.ucode
/mnt/live/memory/images/000-kernel.xzm/usr/lib/firmware/iwlwifi-7265D-12.ucode
/usr/lib/firmware/iwlwifi-7265-12.ucode
/usr/lib/firmware/iwlwifi-7265D-12.ucode
a possible solution is here
https://forum.manjaro.org/index.php?topic=26219.0

if that does not work try clicking on raw on this link and then added it
https://github.com/OpenELEC/iwlwifi-fir ... 5-13.ucode

but hopefully brokenman will offer better long term solution?

User avatar
Blaze
Moderator
Moderator
Posts: 1383
Joined: 28 Dec 2010, 11:31
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64
Location: ☭ Russian Federation, Lipetsk region, Dankov
Contact:

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#42 by Blaze » 09 Jan 2016, 17:54

1. When i boot up Porteus Nemesis v3.5 i see this

Code: Select all

rm: can't remove '/memory/changes/etc/inittab': No such file or directory
2. daemon.log, everything.log

Code: Select all

Jan  9 14:57:05 localhost console-kit-daemon[1975]: WARNING: Failed to get the session id from cgmanager, the error was: invalid request
Jan  9 14:57:05 localhost console-kit-daemon[1975]: WARNING: Couldn't read /proc/2140/environ: Failed to open file '/proc/2140/environ': No such file or directory
Jan  9 14:57:12 localhost console-kit-daemon[1975]: WARNING: Failed to let cgmanager know that it can remove the cgroup when it's empty, the error was: invalid request
Jan  9 14:57:12 localhost console-kit-daemon[1975]: WARNING: Failed to let cgmanager know that it can remove the cgroup when it's empty, the error was: invalid request
Jan  9 14:57:13 localhost dbus[1893]: [system] Activating service name='org.manjaro.pamac' (using servicehelper)
Jan  9 14:57:13 localhost dbus[1893]: [system] Successfully activated service 'org.manjaro.pamac'
Jan  9 14:57:35 localhost init[1]: Switching to runlevel: 0
Jan  9 14:57:35 localhost console-kit-daemon[1975]: GLib-CRITICAL: g_hash_table_foreach_remove_or_steal: assertion 'version == hash_table->version' failed
Jan  9 14:57:37 localhost openrc[4733]: openrc: caught SIGTERM, aborting
3. errors.log

Code: Select all

Jan  9 14:57:37 localhost openrc[4733]: openrc: caught SIGTERM, aborting
4. kernel.log

Code: Select all

Jan  9 14:48:46 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  9 14:48:46 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  9 14:48:52 localhost kernel: pool[2234]: segfault at e4 ip 00007f5d710d9c70 sp 00007f5d693c2cc8 error 4 in libalpm.so.9.0.1[7f5d710c3000+31000]
Jan  9 14:49:01 localhost kernel: atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
Jan  9 14:49:01 localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan  9 14:49:02 localhost kernel: pool[2358]: segfault at e4 ip 00007f010bf68c70 sp 00007f00f7ffecc8 error 4 in libalpm.so.9.0.1[7f010bf52000+31000] 
5. pacman.log

Code: Select all

[2016-01-05 21:04] [ALPM] installed consolekit (1.0.0-4)
[2016-01-05 21:04] [ALPM] installed consolekit-openrc (20151020-1)
[2016-01-05 21:04] [ALPM-SCRIPTLET] call to execv failed (No such file or directory)
[2016-01-05 21:04] [ALPM] installed coreutils (8.24-1)
[2016-01-05 21:04] [ALPM-SCRIPTLET] call to execv failed (No such file or directory)
[2016-01-05 21:04] [ALPM] installed cower (14-2)
[2016-01-05 21:04] [ALPM] installed cpio (2.12-2)
[2016-01-05 21:04] [ALPM-SCRIPTLET] call to execv failed (No such file or directory)
[2016-01-05 21:04] [ALPM] installed cracklib (2.9.4-1)
[2016-01-05 21:04] [ALPM] installed cronie (1.5.0-1)
[2016-01-05 21:04] [ALPM] installed cronie-openrc (20151014-2)
[2016-01-05 21:04] [ALPM-SCRIPTLET] call to execv failed (No such file or directory)
...
[2016-01-05 21:04] [ALPM] installed glib2 (2.46.2-2)
[2016-01-05 21:04] [ALPM] installed glibc (2.22-3)
[2016-01-05 21:04] [ALPM] installed glibc-openrc (20151014-1)
[2016-01-05 21:04] [ALPM-SCRIPTLET] /usr/bin/bash: error while loading shared libraries: libreadline.so.6: cannot open shared object file: No such file or directory
[2016-01-05 21:04] [ALPM] installed gmp (6.1.0-2)
[2016-01-05 21:04] [ALPM-SCRIPTLET] /usr/bin/bash: error while loading shared libraries: libreadline.so.6: cannot open shared object file: No such file or directory
[2016-01-05 21:04] [ALPM] installed gnupg (2.1.10-1)
[2016-01-05 21:04] [ALPM-SCRIPTLET] /usr/bin/bash: error while loading shared libraries: libreadline.so.6: cannot open shared object file: No such file or directory
[2016-01-05 21:04] [ALPM] installed gnutls (3.4.7-2)
[2016-01-05 21:04] [ALPM-SCRIPTLET] /usr/bin/bash: error while loading shared libraries: libreadline.so.6: cannot open shared object file: No such file or directory
6. pm-powersave.log

Code: Select all

/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted
7. What is mean

Code: Select all

[2016-01-09 17:34] [ALPM-SCRIPTLET]  >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2016-01-09 17:34] [ALPM-SCRIPTLET]  >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2016-01-09 17:34] [ALPM-SCRIPTLET]  >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version. 
?

I open /etc/adobe/mms.cfg and find

Code: Select all

#Hardware video decoding
#EnableLinuxHWVideoDecode=1     
replace with

Code: Select all

#Hardware video decoding
EnableLinuxHWVideoDecode=1
OverrideGPUValidation = 1
But I didn't understand that it gave me :)

8. For guest account and for pacaur need to fix chmod for /tmp/pacaurtmp-guest

Code: Select all

guest ~ $ pacaur -S moka-icon-theme-git
:: /tmp/pacaurtmp-guest does not have write permission.
sudo pacaur -S moka-icon-theme-git
[sudo] password for guest: 
:: you cannot perform this operation as root
chmod 777 /tmp/pacaurtmp-guest
chmod: changing permissions of ‘/tmp/pacaurtmp-guest’: Operation not permitted
i fix it under root account (need to login how root)

Code: Select all

chmod 777 /tmp/pacaurtmp-guest
BTW why i can't use pacaur under root account
you cannot perform this operation as root
Why? pacaur is working only in guest account?
Linux porteus 4.12.7-porteus #1 SMP PREEMPT Sun Aug 13 17:38:30 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16

roadie
Full of knowledge
Full of knowledge
Posts: 205
Joined: 02 Jan 2011, 18:41
Distribution: Porteus 3.5...with a twist
Location: In a hayfield

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#43 by roadie » 09 Jan 2016, 19:11

@Blaze
[2016-01-05 21:04] [ALPM-SCRIPTLET] /usr/bin/bash: error while loading shared libraries: libreadline.so.6: cannot open shared object file: No such file or directory


Readline was installed after the stuff in the log...it's in my system.....execv is not.


rm: can't remove '/memory/changes/etc/inittab': No such file or directory
Might be coming from linuxrc...I get it too, haven't looked yet.

Jan 9 14:57:05 localhost console-kit-daemon[1975]: WARNING: Failed to get the session id from cgmanager, the error was: invalid request
Is cgmanager running?....try rc-status.

beny
Full of knowledge
Full of knowledge
Posts: 723
Joined: 02 Jan 2011, 11:33
Location: italy

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#44 by beny » 09 Jan 2016, 20:53

guest ~ $ pacaur -Syu
[sudo] password for guest:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
there is nothing to do
:: Starting AUR upgrade...
:: resolving dependencies...
:: no results found for [zukitwo-themes]:
guest ~ $ pacaur -S moka-icon-theme-git
:: Package(s) moka-icon-theme-git not found in repositories, trying AUR...
:: resolving dependencies...
:: looking for inter-conflicts...

AUR Packages (3): faba-icon-theme-git-latest faba-mono-icons-git-latest moka-icon-theme-git-latest
Repo Packages (2): git-2.6.4-1 perl-error-0.17024-1

Repo Download Size: 4.31 MiB
Repo Installed Size: 26.20 MiB

:: Proceed with installation? [Y/n]
hi blaze seem that work...

roadie
Full of knowledge
Full of knowledge
Posts: 205
Joined: 02 Jan 2011, 18:41
Distribution: Porteus 3.5...with a twist
Location: In a hayfield

Re: Porteus Nemesis v3.5 BUG REPORTS

Post#45 by roadie » 09 Jan 2016, 21:03

@Blaze
BTW why i can't use pacaur under root account

you cannot perform this operation as root


Why? pacaur is working only in guest account?
Thats normal for pacaur, all the building is done as user, installing by root.

Post Reply