Atom Z3735F does not boot - how to boot with grubshell?

Here you can post about your various experiences with PC hardware. You can also post about hardware that is not compatible with the linux kernel or not recommended for use with Porteus.
Post Reply
kultex
White ninja
White ninja
Posts: 9
Joined: 30 Dec 2015, 12:11
Distribution: fluxflux
Location: Austria

Atom Z3735F does not boot - how to boot with grubshell?

Post#1 by kultex » 30 Dec 2015, 16:48

I have a nice little fanless Atom Z3735F PC - Cenovo http://hometheatrelife.com/cenovo-mini- ... el-z3735f/

I would like to run some lightwight linux on it, but the only Linux, that boots, is Ubuntu following this howto http://www.jfwhome.com/2014/03/07/perfe ... book-t100/

with rufus + bootia32.efi + Porteus-LXQT-v3.1-x86_64.iso I managed at least to arrive the grub 2.02 shell - but I cant boot Porteus

normally it should be possible to boot with something like>

linux (hd0,gpt1)/boot/vmlinuz-3.18.0-9-generic root=/dev/mmcblk0p5
initrd (hd0,gpt1)/boot/initrd-3.18.0-9-generic

but I dont find files like this in the iso - does somebody know, how I can boot Porteus from the grub shell

just in case lspci+lsmod from Ubuntu

Code: Select all

ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0f)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0f)
00:03.0 Multimedia controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Camera ISP (rev 0f)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI (rev 0f)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0f)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0f)
ubuntu@ubuntu:~$ lsmod
Module                  Size  Used by
intel_rapl             20480  0
intel_soc_dts_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
kvm_intel             167936  0
kvm                   512000  1 kvm_intel
snd_soc_sst_baytrail_pcm    28672  0
gpio_keys              20480  0
snd_soc_sst_ipc        16384  1 snd_soc_sst_baytrail_pcm
snd_soc_sst_dsp        53248  1 snd_soc_sst_baytrail_pcm
axp288_adc             16384  0
punit_atom_debug       16384  0
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
aesni_intel           167936  0
snd_soc_sst_byt_rt5640_mach    16384  0
aes_x86_64             20480  1 aesni_intel
lrw                    16384  1 aesni_intel
gf128mul               16384  1 lrw
glue_helper            16384  1 aesni_intel
cdc_ether              16384  0
ablk_helper            16384  1 aesni_intel
usbnet                 40960  1 cdc_ether
cryptd                 20480  3 ghash_clmulni_intel,aesni_intel,ablk_helper
input_leds             16384  0
r8152                  49152  0
mii                    16384  2 r8152,usbnet
mei_txe                20480  0
lpc_ich                24576  0
mei                    98304  1 mei_txe
mac_hid                16384  0
bmc150_accel           24576  0
8250_fintek            16384  0
kxcjk_1013             20480  0
industrialio_triggered_buffer    16384  2 kxcjk_1013,bmc150_accel
tpm_crb                16384  0
dw_dmac                16384  0
dw_dmac_core           24576  2 dw_dmac,snd_soc_sst_dsp
soc_button_array       16384  0
jsa1212                16384  0
kfifo_buf              16384  1 industrialio_triggered_buffer
industrialio           61440  6 jsa1212,axp288_adc,industrialio_triggered_buffer,kxcjk_1013,kfifo_buf,bmc150_accel
goodix                 16384  0
snd_intel_sst_acpi     16384  0
snd_soc_rt5640        114688  1 snd_soc_sst_byt_rt5640_mach
snd_intel_sst_core     73728  1 snd_intel_sst_acpi
snd_soc_sst_mfld_platform    86016  1 snd_intel_sst_core
snd_soc_rl6231         16384  1 snd_soc_rt5640
snd_soc_core          196608  4 snd_soc_rt5640,snd_soc_sst_baytrail_pcm,snd_soc_sst_byt_rt5640_mach,snd_soc_sst_mfld_platform
snd_compress           20480  1 snd_soc_core
ac97_bus               16384  1 snd_soc_core
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_pcm               102400  5 snd_soc_rt5640,snd_soc_core,snd_soc_sst_baytrail_pcm,snd_soc_sst_mfld_platform,snd_pcm_dmaengine
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
snd                    81920  8 snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_soc_sst_mfld_platform,snd_seq_device,snd_compress
int3400_thermal        16384  0
processor_thermal_device    16384  0
int3402_thermal        16384  0
acpi_thermal_rel       16384  1 int3400_thermal
int3403_thermal        16384  0
int340x_thermal_zone    16384  3 int3402_thermal,processor_thermal_device,int3403_thermal
intel_soc_dts_iosf     16384  2 intel_soc_dts_thermal,processor_thermal_device
rfkill_gpio            16384  0
i2c_designware_platform    16384  0
acpi_pad               20480  0
soundcore              16384  1 snd
iosf_mbi               16384  3 intel_soc_dts_iosf,intel_rapl,punit_atom_debug
i2c_designware_core    16384  1 i2c_designware_platform
snd_soc_sst_acpi       16384  0
spi_pxa2xx_platform    24576  0
pwm_lpss_platform      16384  0
8250_dw                16384  0
pwm_lpss               16384  1 pwm_lpss_platform
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
squashfs               49152  1
overlay                49152  1
nls_iso8859_1          16384  1
dm_mirror              24576  0
dm_region_hash         24576  1 dm_mirror
dm_log                 20480  2 dm_region_hash,dm_mirror
mmc_block              36864  0
hid_generic            16384  0
i915                 1130496  4
i2c_algo_bit           16384  1 i915
uas                    24576  0
drm_kms_helper        126976  1 i915
usb_storage            69632  2 uas
usbhid                 49152  0
drm                   356352  6 i915,drm_kms_helper
video                  36864  1 i915
i2c_hid                20480  0
hid                   118784  3 i2c_hid,hid_generic,usbhid
sdhci_acpi             16384  0
sdhci                  45056  1 sdhci_acpi



aus9

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#2 by aus9 » 31 Dec 2015, 03:37

Hi

Until you get a better reply as I don't have your hw and don't use GPT
with rufus + bootia32.efi + Porteus-LXQT-v3.1-x86_64.iso I managed at least to arrive the grub 2.02 shell
there is something not quite right in that statement. To be blunter, you have one of the following scenarios

A You truly made a bootable usb stick/hard drive of Portues but you failed to change bios order

B Same as A but you did not truly update your bios as per link suggesting that you needed to....to allow usb boot devices

C You failed to make a bootable usb stick....bios attempted to boot usb device, found no bootloader so jumped to next detected media.....in this case we know grub2 is on the internal device

########################

We know that grub2 is only on internal media because Porteus does not use grub2 as a bootloader.....it uses Syslinux AKA isolinux.

###################

Suggestions
##########
You may like to eliminate some easy things? Some may not be relevant

1 Can you boot the usb stick with Porteus on a normal PC by pressing F8 at the bios screen and getting a Porteus menu up?

2 If (1) fails that might be a clue to (C) so what did you did do to make the bootable usb stick

3 In one of the links, it suggests disable secure boot in bios.........did you do so?

User avatar
Ed_P
Contributor
Contributor
Posts: 3314
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#3 by Ed_P » 31 Dec 2015, 05:17

kultex wrote:normally it should be possible to boot with something like>

linux (hd0,gpt1)/boot/vmlinuz-3.18.0-9-generic root=/dev/mmcblk0p5
initrd (hd0,gpt1)/boot/initrd-3.18.0-9-generic
I boot a Porteus ISO using these grub2 commands:

Code: Select all

set iso=/ISOs/UP.Porteus-LXQT-v3.1-x86_64-nu.iso

     search -f $iso --set=root 
     echo ISO root is:          $root
     echo ISO is:               $iso
     if [ -f (hd0,1)/USB_INSTALLATION.txt ]; then
         set linux_drv=/mnt/sdb1/porteus3.1
     else
         set linux_drv=/mnt/sda5/porteus3.1
     fi
     echo Porteus extramods is: $linux_drv
     set porteus_parms="volume=33 3"
     echo Porteus parms are:    $porteus_parms
     echo
     loopback loop $iso
     sleep -v -i 7 
     echo "Loading Linux" 
#     linux (loop)/boot/syslinux/vmlinuz from=$iso $porteus_parms 
     linux (loop)/boot/syslinux/vmlinuz from=$iso extramod="$linux_drv/Modules;$linux_drv/modsavedat" volume=33 reboot=cold
     echo "Loading initrd"
     initrd (loop)/boot/syslinux/initrd.xz
Maybe they will help you with yours.

You could also look at an app called Easy2Boot.
Ed

kultex
White ninja
White ninja
Posts: 9
Joined: 30 Dec 2015, 12:11
Distribution: fluxflux
Location: Austria

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#4 by kultex » 31 Dec 2015, 15:00

thx for your answers

@aus9 the problem of all of this Atom devices - BayTrail tablets und miniPCs - they have very stripped down UEFI-firmware and they have a 64bit CPU, but a 32bit UEFI.
No legacy mode - no bootorder - there is only one possibility to boot from a stick and you select in the bios boot from this stick. And this stick needs a file called bootia32.efi in /EFI/boot/ and this bootia32.efi uses Grub2

The problem is described here: https://bugs.launchpad.net/ubuntu/+sour ... ug/1341944

@Ed_P ok I tried

linux (hd0,gpt1)/boot/syslinux/vmlinuz root=/dev/null
initrd (hd0,gpt1)/boot/syslinux/initrd.xz

but I get

error: invalid magic number

evrything I was searching the net, did not work

Edit: and I forgot to say - until now I avoided UEFI Hardware, but my OdroidU3, which runs perfect under Debian and LXDE has a Hardware bug - the on/off button is wrotten - if I have to restart it, it sometimes takes 2 hours...

And I am also afraid to load any bootloader, because I have no experience with this UEFI loades until now....

User avatar
Ed_P
Contributor
Contributor
Posts: 3314
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#5 by Ed_P » 31 Dec 2015, 19:41

Confused. :unknown:

What OS is on the Atom's hardrive?

Where is Porteus on the hard drive or a USB drive? Is it installed to the drive? What did you use to load Porteus to the drive? What is the format of the drive? What else do you boot with grub2 on the Atom?

Check out this Porteus EFI posting: viewtopic.php?f=81&t=4632&p=33898#p33604

Porteus doesn't use grub2 to boot on EFI systems it uses rEFInd. And it doesn't use a cheatcode of root=/dev/null ttbomk.
Ed

kultex
White ninja
White ninja
Posts: 9
Joined: 30 Dec 2015, 12:11
Distribution: fluxflux
Location: Austria

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#6 by kultex » 31 Dec 2015, 20:33

ok... to make it clear:

on the internal harddisk, there is Android + Win8.1

on the USB stick, there is Porteus - rufus USB bootable image creator "burnd" it to the stick and I added the bootia32.efi, which is grub 2.02 to the stick

there is no other way to boot the stick than booting it with grub2

as long as I cannot boot one linux, that can deal with the internal harddisk and make an image, I will noch change the bootloader.... for me its to dangerous with this 32 / 64 bit confusion

I hope, its clear

User avatar
Ed_P
Contributor
Contributor
Posts: 3314
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#7 by Ed_P » 31 Dec 2015, 22:20

kultex wrote:on the USB stick, there is Porteus - rufus USB bootable image creator "burnd" it to the stick and I added the bootia32.efi, which is grub 2.02 to the stick

there is no other way to boot the stick than booting it with grub2
I disagree.

Follow the steps in the link I posted. It booted on my wife's Windows 8.1 EFI machine with only 2 BIOS changes; 1. I disabled Secure Boot and 2. I changed the boot device order to put the USB drive first. No boot loader, no BCD changes, no Windows changes.

In the steps in the link I posted Porteus writes it's own EFI files to the USB drive. You don't have to manually do that.
Ed

User avatar
brokenman
Site Admin
Site Admin
Posts: 5542
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#8 by brokenman » 31 Dec 2015, 23:12

You need to extract the kernel and initrd from the Porteus ISO. These need to be on the EFI partition. They are found in ISO/boot/syslinux/{vmlinuz,initrd.xz}
You need to extract the porteus folder from the ISO. This can be on whatever partition you choose. Even the windows one.

Put the kernel and initrd inside the boot folder on your EFI partition then boot like this.

inux (hd0,gpt1)/boot/vmlinuz root=/dev/mmcblk0p5 <--- obviously this is the path to the folder containing the "porteus" directory.
initrd (hd0,gpt1)/boot/initrd.xz

Good luck
How do i become super user?
Wear your underpants on the outside and put on a cape.

aus9

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#9 by aus9 » 01 Jan 2016, 01:57

Now I might be confused but as I have already declared I don't have your hw, let me make some suggestions to OP and others.

AFAIK /dev/mmcblk0p5 or similar assumes a flash media file structure and not a traditional Linux USB or Windows USB file structure.
The OP has said that only w8 and android are on internal so I don't think brokenman's suggestion will work as is....also hd0 might well be internal but its not clear to me if bios change boot order swaps the hard drive numbers? to allow usb to be seen as first hd0....and if it is....then I would not expect to use /dev/ you-know-what

2) Thanks for the bug link. It suggests to me, I may be wrong etc, that it might be smarter to download a porteus 32 bit and device has only 2G of RAM so no waste will occur.
b) that means any efi 32 bit will or should be already suitable for conversion

3) So finally it seems to me you have confimed you have a working grub2 Ubuntu and a bios that allows usb boot.

Therefore Porteus is well suited to extract some files from the 32 bit Porteus and provide a 40_custom grub2 bootloader entry.

The rough steps can be expanded upon if OP is interested but goes something like this

Download a 32 bit Porteus

On a linux system.....insert the ubunutu usb stick and look at its structure.....as I am not sure what you have lets assume you have one internal drive and one usb stick inserted
internal is sda
usb is sdb.....and its partitions are sdb1 sdb2 and maybe sdb3 of which
sdb1 is the efi fat32 partition.....so this is where you copy the porteus efi file

Lets pretend the balance of ubuntu is on one partition sdb2

using root powers we make a simple easy to type directories to hold our Porteus kernel and initrd (rootfs)

Code: Select all

sudo su
mkdir /tmp/iso
mount -o loop <yourdownloadpathway to 32 bit Porteus>filename.iso /tmp/iso
cd /mnt/sdb2
mkdir 1 
Now I tend to use mc in a terminal for next bits but you can issue the filemanager command because you need root powers to
(the porteus files are currently visible in /tmp/iso)
--copy the porteus kernel and initrd files to /mnt/sdb2/1 and rename them to keep simple names v=vmlinuz i.xz=initrd.xz
--copy the porteus folder to /mnt/sdb2...including its sign file
--copy the changes folder to /mnt/sdb2

RESEARCH current /mnt/sdb2/boot/grub/grub.cfg to find out its hd number to use below....as it may not be hd0 as I use that beast I will show the sections that will interest you
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-838e3d73-ec57-4558-91d6-e81a02644e31' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
set root='hd0,msdos1 its hd0 for me but YMMV

copy and paste the following suggestion into to replace /mnt/sdb2/etc/grub.d/40_custom

I am aware you may want more than one entry but we can add others later
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.

menuentry'Porteus' {
set root='hd0,msdos2'
kernel /1/v root=/dev/sdb2
initrd /1/i.xz
}
I actually prefer you unmount the usb stick and create labels for each linux partition so we can use them in the 40_custom file...but I am not sure you are going to agree to any of this so won't expand on it until we know we not wasting each others time eh

do not bother attempting chroot and running update-grub

instead reboot with usb as first device on either your linxu PC or device....should not matter which
now you can update bootloader menu

Code: Select all

sudo update-grub
reboot to test

I can expand on this if interested.....but not sure how scared you are?
:D

kultex
White ninja
White ninja
Posts: 9
Joined: 30 Dec 2015, 12:11
Distribution: fluxflux
Location: Austria

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#10 by kultex » 01 Jan 2016, 12:41

thank you all - I am writing from the Cenovo :beer:

I did not have to change anything on the stick - just the grubshell bootlines

grub> set root=(hd0,gpt1)
grub> linux /boot/syslinux/vmlinuz root=/dev/sda1
grub> initrd /boot/syslinux/initrd.xz
grub> boot

I had no panel but I had a !!!mouse!!! - in Ubuntu and Lubuntu I did not have a mouse - the problem is, that there are two displays and I just have the UNKNOWN1 - see screenshot, but with the mouse I managed to get the panel to the top and it recognizes the internal harddisk and mounts the ESP partition !!!!

the rest of the partitions are a bit strange - see the error in the leafpad file

so as soon as I have more time I will continue working on it - first stepp is done!!!

no attachments - so here is the screenshot https://www.dropbox.com/s/nibn69tfcs2me ... t.png?dl=0

aus9

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#11 by aus9 » 01 Jan 2016, 13:30

I notice you have gparted open. I strongly suggest you do not open that any time soon to reduce the chance of accidently deleting modifying any flash partition.

Your next step unless bronkenman disagrees might be to add a new line to your fstab to allow auto mounting of your ESP partiton but it should be user and ro to protect yourself IMHO.
altho it says "bootable" and appears to have a key against it, which means its locked from normal naughty user actions

You may want to post one or more of your logs from /var/log?

###################
What do you mean by 2 displays?

kultex
White ninja
White ninja
Posts: 9
Joined: 30 Dec 2015, 12:11
Distribution: fluxflux
Location: Austria

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#12 by kultex » 01 Jan 2016, 16:29

what I mean with 2 screens screeninfo + the part from Xorg.0.log

Code: Select all

SCREEN INFO:

Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 32767 x 32767
HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
   1920x1080      60.0*+   50.0     59.9  
   1920x1080i     60.1     50.0     60.0  
   1680x1050      59.9  
   1280x1024      75.0     60.0  
   1440x900       59.9  
   1280x960       60.0  
   1280x800       59.9  
   1152x864       75.0  
   1280x720       60.0     50.0     59.9  
   1440x576i      50.1  
   1024x768       75.1     70.1     60.0  
   1440x480i      60.1     60.1  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   720x576        50.0  
   720x480        60.0     59.9  
   640x480        75.0     72.8     66.7     60.0     59.9  
   720x400        70.1  
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
UNKNOWN1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1920x1200      59.7*+

--------------------------------------------------------------------------------------------------------------------------------

Xorg.0.log

[    11.900] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  1 15:49:15 2016
[    11.909] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.916] (==) No Layout section.  Using the first Screen section.
[    11.916] (==) No screen section available. Using defaults.

[    12.621] (II) AIGLX: Loaded and initialized i965
[    12.621] (II) GLX: Initialized DRI2 GL provider for screen 0
[    12.626] (II) intel(0): switch to mode 1920x1200@59.7 on pipe 0 using UNKNOWN1, position (0, 0), rotation normal
[    12.635] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 1 using HDMI1, position (0, 0), rotation normal
[    12.643] (II) intel(0): Setting screen physical size to 508 x 317
[    12.904] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    12.904] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
intel(0): switch to mode 1920x1200@59.7 on pipe 0 using UNKNOWN1, position (0, 0), rotation normal - this means it takes the UnKnown1 screen as main screen - so I do not see the bottom panel - so this means, I have to write a screen.conf in xorg.conf.d

some more logs:

dmesg

Code: Select all

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.17.4-porteus (root@porteus) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 12 12:48:28 Local time zone must be set--
[    0.000000] Command line: BOOT_IMAGE=/boot/syslinux/vmlinuz root=/dev/sda1
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007ba96fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ba97000-0x000000007bac6fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bac7000-0x000000007baf9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007bafa000-0x000000007c1f9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c1fa000-0x000000007c465fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c466000-0x000000007c569fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007c56a000-0x000000007cbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x7baf9000  ACPI 2.0=0x7baf9014  SMBIOS=0x7c465210 
[    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
[    0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
[    0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000c7a000) (11MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000c7a000-0x0000000020000000) (499MB)
[    0.000000] efi: mem06: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037e9a000) (380MB)
[    0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000037e9a000-0x0000000037f45000) (0MB)
[    0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037f45000-0x000000005a750000) (552MB)
[    0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000005a750000-0x0000000078c00000) (484MB)
[    0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000078c00000-0x0000000078c20000) (0MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000078c20000-0x0000000079167000) (5MB)
[    0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000079167000-0x00000000791ff000) (0MB)
[    0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000791ff000-0x000000007b497000) (34MB)
[    0.000000] efi: mem15: type=7, attr=0xf, range=[0x000000007b497000-0x000000007b90f000) (4MB)
[    0.000000] efi: mem16: type=2, attr=0xf, range=[0x000000007b90f000-0x000000007b918000) (0MB)
[    0.000000] efi: mem17: type=3, attr=0xf, range=[0x000000007b918000-0x000000007ba97000) (1MB)
[    0.000000] efi: mem18: type=0, attr=0xf, range=[0x000000007ba97000-0x000000007bac7000) (0MB)
[    0.000000] efi: mem19: type=9, attr=0xf, range=[0x000000007bac7000-0x000000007bafa000) (0MB)
[    0.000000] efi: mem20: type=10, attr=0xf, range=[0x000000007bafa000-0x000000007c1fa000) (7MB)
[    0.000000] efi: mem21: type=6, attr=0x800000000000000f, range=[0x000000007c1fa000-0x000000007c466000) (2MB)
[    0.000000] efi: mem22: type=5, attr=0x800000000000000f, range=[0x000000007c466000-0x000000007c56a000) (1MB)
[    0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000007c56a000-0x000000007cbf6000) (6MB)
[    0.000000] efi: mem24: type=2, attr=0xf, range=[0x000000007cbf6000-0x000000007cbf7000) (0MB)
[    0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000007cbf7000-0x000000007cc00000) (0MB)
[    0.000000] efi: mem26: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[    0.000000] efi: mem27: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[    0.000000] efi: mem28: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed09000) (0MB)
[    0.000000] efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./CENOVO, BIOS 5.6.5 05/23/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7cc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07E000000 mask FFE000000 uncachable
[    0.000000]   2 base 07D000000 mask FFF000000 uncachable
[    0.000000]   3 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   4 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 07CD00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] Base memory trampoline at [ffff880000069000] 69000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x017ee000, 0x017eefff] PGTABLE
[    0.000000] BRK [0x017ef000, 0x017effff] PGTABLE
[    0.000000] BRK [0x017f0000, 0x017f0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7b600000-0x7b7fffff]
[    0.000000]  [mem 0x7b600000-0x7b7fffff] page 2M
[    0.000000] BRK [0x017f1000, 0x017f1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x78000000-0x7b5fffff]
[    0.000000]  [mem 0x78000000-0x7b5fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x77ffffff]
[    0.000000]  [mem 0x20200000-0x77ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x7b800000-0x7ba96fff]
[    0.000000]  [mem 0x7b800000-0x7b9fffff] page 2M
[    0.000000]  [mem 0x7ba00000-0x7ba96fff] page 4k
[    0.000000] BRK [0x017f2000, 0x017f2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c56a000-0x7cbfffff]
[    0.000000]  [mem 0x7c56a000-0x7c5fffff] page 4k
[    0.000000]  [mem 0x7c600000-0x7cbfffff] page 2M
[    0.000000] BRK [0x017f3000, 0x017f3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37e9a000-0x37f44fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007BAF9014 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000007BAF8100 0000D4 (v01 ALASKA A M I    00000003 MSFT 0100000D)
[    0.000000] ACPI: FACP 0x000000007BAF2000 00010C (v05 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: DSDT 0x000000007BADF000 00EEEB (v02 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: TCPA 0x000000007BAF7000 000032 (v02                 00000000      00000000)
[    0.000000] ACPI: MSDM 0x000000007BAF6000 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: UEFI 0x000000007C1AE000 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: BCFG 0x000000007BAF5000 0000BD (v01 ALASKA BATTCON  00000003 AMI  0100000D)
[    0.000000] ACPI: OEM0 0x000000007BAF4000 000084 (v05 ALASKA BATTERY  00000003 AMI  0100000D)
[    0.000000] ACPI: DBG2 0x000000007BAF3000 000072 (v00 ALASKA INTLDBG2 00000003 AMI  0100000D)
[    0.000000] ACPI: HPET 0x000000007BAF1000 000038 (v01 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: LPIT 0x000000007BAF0000 000104 (v01 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: APIC 0x000000007BAEF000 00006C (v03 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: MCFG 0x000000007BAEE000 00003C (v01 ALASKA A M I    00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BADE000 0005DA (v01 ALASKA CpuDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BADB000 00249A (v01 ALASKA DptfTab  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BADA000 000058 (v01 ALASKA LowPwrM  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BAD9000 0000FF (v01 ALASKA SoCDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: FPDT 0x000000007BAD8000 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007BAD7000 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BAD6000 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BAD5000 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BAD4000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.000000] ACPI: TPM2 0x000000007BAD3000 000034 (v03                 00000000      00000000)
[    0.000000] ACPI: CSRT 0x000000007BAD2000 00014C (v00 ALASKA A M I    00000005 INTL 20120624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cbfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7cbfffff]
[    0.000000]   NODE_DATA [mem 0x7b914000-0x7b917fff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076c00000-ffff880078bfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0008efff]
[    0.000000]   node   0: [mem 0x00090000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x7ba96fff]
[    0.000000]   node   0: [mem 0x7c56a000-0x7cbfffff]
[    0.000000] On node 0 totalpages: 507593
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 67 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7920 pages used for memmap
[    0.000000]   DMA32 zone: 503597 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics stolen memory at 0x7cf00000-0x7eefffff
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ba97000-0x7bac6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bac7000-0x7baf9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bafa000-0x7c1f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c1fa000-0x7c465fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c466000-0x7c569fff]
[    0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007b600000 s75072 r8192 d23232 u524288
[    0.000000] pcpu-alloc: s75072 r8192 d23232 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 499542
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: quiet BOOT_IMAGE=/boot/syslinux/vmlinuz root=/dev/sda1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 1944148K/2030372K available (4767K kernel code, 595K rwdata, 1232K rodata, 848K init, 640K bss, 86224K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:1024 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Maximum core-clock to bus-clock ratio: 0x10
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 1331200 KHz
[    0.000000] lapic_timer_frequency = 83200
[    0.000000] tsc: Detected 1331.200 MHz processor
[    0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.40 BogoMIPS (lpj=1331200)
[    0.000026] pid_max: default: 32768 minimum: 301
[    0.000041] ACPI: Core revision 20140724
[    0.041430] ACPI: All ACPI Tables successfully acquired
[    0.043012] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.044426] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.045089] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.045103] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.045491] Initializing cgroup subsys net_cls
[    0.045526] CPU: Physical Processor ID: 0
[    0.045530] CPU: Processor Core ID: 0
[    0.045537] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.045537] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.050498] mce: CPU supports 6 MCE banks
[    0.050511] CPU0: Thermal monitoring enabled (TM1)
[    0.050525] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.050525] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.050688] Freeing SMP alternatives memory: 12K (ffffffff81749000 - ffffffff8174c000)
[    0.055532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.065547] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.065559] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.065563] ..... (found apic 0 pin 0) ...
[    0.075569] ....... works.
[    0.075573] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (fam: 06, model: 37, stepping: 08)
[    0.075604] TSC deadline timer enabled
[    0.075622] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.075643] ... version:                3
[    0.075647] ... bit width:              40
[    0.075651] ... generic registers:      2
[    0.075654] ... value mask:             000000ffffffffff
[    0.075658] ... max period:             000000ffffffffff
[    0.075661] ... fixed-purpose events:   3
[    0.075664] ... event mask:             0000000700000003
[    0.081782] x86: Booting SMP configuration:
[    0.081789] .... node  #0, CPUs:      #1 #2 #3
[    0.140246] x86: Booted up 1 node, 4 CPUs
[    0.140254] smpboot: Total of 4 processors activated (10649.60 BogoMIPS)
[    0.141169] devtmpfs: initialized
[    0.141629] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.141636] PM: Registering ACPI NVS region [mem 0x7bafa000-0x7c1f9fff] (7340032 bytes)
[    0.142093] pinctrl core: initialized pinctrl subsystem
[    0.142401] NET: Registered protocol family 16
[    0.142676] cpuidle: using governor ladder
[    0.142682] cpuidle: using governor menu
[    0.142765] ACPI: bus type PCI registered
[    0.142771] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.142922] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.142929] PCI: not using MMCONFIG
[    0.142933] PCI: Using configuration type 1 for base access
[    0.152943] ACPI: Added _OSI(Module Device)
[    0.152950] ACPI: Added _OSI(Processor Device)
[    0.152954] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.152958] ACPI: Added _OSI(Processor Aggregator Device)
[    0.185046] ACPI: Dynamic OEM Table Load:
[    0.185071] ACPI: SSDT 0xFFFF88007B151000 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.186961] ACPI: Dynamic OEM Table Load:
[    0.186983] ACPI: SSDT 0xFFFF88007B151800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.200097] ACPI: Dynamic OEM Table Load:
[    0.200117] ACPI: SSDT 0xFFFF88007B195200 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.206705] ACPI: Dynamic OEM Table Load:
[    0.206725] ACPI: SSDT 0xFFFF88007B1AA300 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.214847] ACPI: Interpreter enabled
[    0.214869] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[    0.214883] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[    0.214894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140724/hwxface-580)
[    0.214907] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140724/hwxface-580)
[    0.214926] ACPI: (supports S0 S5)
[    0.214931] ACPI: Using IOAPIC for interrupt routing
[    0.214989] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.225745] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[    0.225752] PCI: not using MMCONFIG
[    0.225788] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.230553] ACPI: Power Resource [USBC] (on)
[    0.236251] ACPI: Power Resource [WWPR] (off)
[    0.245330] ACPI: Power Resource [PLPE] (on)
[    0.252401] ACPI: Power Resource [CLK0] (on)
[    0.252525] ACPI: Power Resource [CLK1] (on)
[    0.254528] ACPI: Power Resource [CLK0] (on)
[    0.254635] ACPI: Power Resource [CLK1] (on)
[    0.261290] ACPI: Power Resource [P28X] (off)
[    0.261404] ACPI: Power Resource [P18X] (off)
[    0.261509] ACPI: Power Resource [P28P] (off)
[    0.261614] ACPI: Power Resource [P18P] (off)
[    0.261726] ACPI: Power Resource [P28T] (off)
[    0.261842] ACPI: Power Resource [P18T] (off)
[    0.261959] ACPI: Power Resource [P1XT] (off)
[    0.267580] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.267595] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.267708] \_SB_.PCI0:_OSC invalid UUID
[    0.267713] _OSC request data:1 1e 0 
[    0.267725] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.268363] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.268826] PCI host bridge to bus 0000:00
[    0.268836] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.268843] pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
[    0.268859] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
[    0.268866] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.268872] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.268879] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.268885] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[    0.268892] pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000]
[    0.268898] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90cffffe]
[    0.268904] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
[    0.268922] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.269148] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.269171] pci 0000:00:02.0: reg 0x10: [mem 0x90400000-0x907fffff]
[    0.269189] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.269206] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.269429] pci 0000:00:03.0: [8086:0f38] type 00 class 0x048000
[    0.269448] pci 0000:00:03.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.269687] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.269715] pci 0000:00:14.0: reg 0x10: [mem 0x90c00000-0x90c0ffff 64bit]
[    0.269789] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.270025] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.270060] pci 0000:00:1a.0: reg 0x10: [mem 0x90b00000-0x90bfffff]
[    0.270080] pci 0000:00:1a.0: reg 0x14: [mem 0x90a00000-0x90afffff]
[    0.270202] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.270414] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.271494] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.271662] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.271828] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272006] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272170] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272334] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272498] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.272662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.283826] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.283834] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.283840] vgaarb: loaded
[    0.283845] vgaarb: bridge control possible 0000:00:02.0
[    0.284123] SCSI subsystem initialized
[    0.284218] libata version 3.00 loaded.
[    0.284231] ACPI: bus type USB registered
[    0.284296] usbcore: registered new interface driver usbfs
[    0.284327] usbcore: registered new interface driver hub
[    0.284385] usbcore: registered new device driver usb
[    0.284441] Linux video capture interface: v2.00
[    0.284595] Advanced Linux Sound Architecture Driver Initialized.
[    0.284600] PCI: Using ACPI for IRQ routing
[    0.284605] PCI: pci_cache_line_size set to 64 bytes
[    0.284634] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.284642] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.284647] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.284652] e820: reserve RAM buffer [mem 0x7ba97000-0x7bffffff]
[    0.284657] e820: reserve RAM buffer [mem 0x7cc00000-0x7fffffff]
[    0.284997] Switched to clocksource refined-jiffies
[    0.285102] pnp: PnP ACPI init
[    0.285216] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.285497] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.285506] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.285513] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.285520] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.285527] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.285536] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.285765] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.289335] pnp 00:03: unknown resource type 17 in _CRS
[    0.289343] pnp 00:03: can't evaluate _CRS: 1
[    0.289400] pnp 00:03: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
[    0.290062] pnp: PnP ACPI: found 4 devices
[    0.295311] pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
[    0.295320] pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
[    0.295326] pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
[    0.295333] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.295340] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[    0.295346] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[    0.295352] pci_bus 0000:00: resource 10 [mem 0x7cf00001-0x7ef00000]
[    0.295359] pci_bus 0000:00: resource 11 [mem 0x80000000-0x90cffffe]
[    0.295365] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed40fff]
[    0.295417] NET: Registered protocol family 2
[    0.295842] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.295957] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.296089] TCP: Hash tables configured (established 16384 bind 16384)
[    0.296142] TCP: reno registered
[    0.296156] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.296191] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.296296] NET: Registered protocol family 1
[    0.296328] pci 0000:00:02.0: Video device with shadowed ROM
[    0.296648] PCI: CLS 0 bytes, default 64
[    0.297121] Unpacking initramfs...
[    0.488535] Freeing initrd memory: 684K (ffff880037e9a000 - ffff880037f45000)
[    0.489601] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.493875] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.494025] fuse init (API version 7.23)
[    0.494218] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.495209] aufs 3.17-20141110
[    0.495220] msgmni has been set to 3884
[    0.495619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.495626] io scheduler noop registered
[    0.495630] io scheduler deadline registered (default)
[    0.495777] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.495823] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.495928] efifb: probing for efifb
[    0.495952] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000480000, using 1920k, total 1920k
[    0.495958] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.495961] efifb: scrolling: redraw
[    0.495967] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.551562] Console: switching to colour frame buffer device 100x37
[    0.606608] fb0: EFI VGA frame buffer device
[    0.606630] intel_idle: MWAIT substates: 0x33000020
[    0.606634] intel_idle: v0.4 model 0x37
[    0.606637] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.607260] ACPI Error: No handler for Region [GPOP] (ffff88007682f090) [GeneralPurposeIo] (20140724/evregion-163)
[    0.607272] ACPI Error: Region GeneralPurposeIo (ID=8) has no handler (20140724/exfldio-299)
[    0.607283] ACPI Error: Method parse/execution failed [\_SB_.ADP1._PSR] (Node ffff88007683e208), AE_NOT_EXIST (20140724/psparse-536)
[    0.607303] ACPI Exception: AE_NOT_EXIST, Error reading AC Adapter state (20140724/ac-131)
[    0.611427] [Firmware Bug]: No valid trip found
[    0.611742] hpet: number irqs doesn't agree with number of timers
[    0.611815] Linux agpgart interface v0.103
[    0.611855] [drm] Initialized drm 1.1.0 20060810
[    0.611996] ACPI: Battery Slot [BMBT] (battery present)
[    0.613593] loop: module loaded
[    0.613716] usbcore: registered new interface driver rtsx_usb
[    0.615416] Fusion MPT base driver 3.04.20
[    0.615421] Copyright (c) 1999-2008 LSI Corporation
[    0.615436] Fusion MPT SPI Host driver 3.04.20
[    0.615473] Fusion MPT SAS Host driver 3.04.20
[    0.615524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.615528] ehci-pci: EHCI PCI platform driver
[    0.615556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.615566] ohci-pci: OHCI PCI platform driver
[    0.615595] uhci_hcd: USB Universal Host Controller Interface driver
[    0.615848] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.615866] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.616283] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.616316] xhci_hcd 0000:00:14.0: irq 87 for MSI/MSI-X
[    0.616758] hub 1-0:1.0: USB hub found
[    0.616783] hub 1-0:1.0: 6 ports detected
[    0.617987] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.617999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.618374] hub 2-0:1.0: USB hub found
[    0.618396] hub 2-0:1.0: 1 port detected
[    0.618768] usbcore: registered new interface driver usb-storage
[    0.618792] usbcore: registered new interface driver ums-alauda
[    0.618814] usbcore: registered new interface driver ums-cypress
[    0.618835] usbcore: registered new interface driver ums-datafab
[    0.618860] usbcore: registered new interface driver ums_eneub6250
[    0.618882] usbcore: registered new interface driver ums-freecom
[    0.618903] usbcore: registered new interface driver ums-isd200
[    0.618924] usbcore: registered new interface driver ums-jumpshot
[    0.618944] usbcore: registered new interface driver ums-karma
[    0.618965] usbcore: registered new interface driver ums-onetouch
[    0.618999] usbcore: registered new interface driver ums-realtek
[    0.619020] usbcore: registered new interface driver ums-sddr09
[    0.619046] usbcore: registered new interface driver ums-sddr55
[    0.619068] usbcore: registered new interface driver ums-usbat
[    0.619138] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.370722] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.504543] hub 1-1:1.0: USB hub found
[    1.504834] hub 1-1:1.0: 4 ports detected
[    1.626710] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    1.660808] Switched to clocksource tsc
[    1.661693] i8042: No controller found
[    1.662729] mousedev: PS/2 mouse device common for all mice
[    1.663163] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20140724/evxface-643)
[    1.663621] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.663693] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram
[    1.663757] Intel P-state driver initializing.
[    1.664314] sdhci: Secure Digital Host Controller Interface driver
[    1.664326] sdhci: Copyright(c) Pierre Ossman
[    1.665807] sdhci-acpi 80860F14:00: No vmmc regulator found
[    1.665826] sdhci-acpi 80860F14:00: No vqmmc regulator found
[    1.667354] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    1.669689] sdhci-acpi INT33BB:00: No vmmc regulator found
[    1.669697] sdhci-acpi INT33BB:00: No vqmmc regulator found
[    1.671208] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    1.671580] sdhci-acpi 80860F14:02: failed to setup card detect gpio
[    1.672595] sdhci-acpi 80860F14:02: No vmmc regulator found
[    1.672602] sdhci-acpi 80860F14:02: No vqmmc regulator found
[    1.674308] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    1.674420] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    1.674424] wbsd: Copyright(c) Pierre Ossman
[    1.674522] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    1.677986] usbcore: registered new interface driver vub300
[    1.678045] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.678750] EFI Variables Facility v0.08 2004-May-17
[    1.684848] hidraw: raw HID events driver (C) Jiri Kosina
[    1.684901] usbcore: registered new interface driver usbhid
[    1.684904] usbhid: USB HID core driver
[    1.685101] TCP: cubic registered
[    1.685106] NET: Registered protocol family 17
[    1.687956] registered taskstats version 1
[    1.689130] rtc_cmos 00:00: setting system clock to 2016-01-01 15:49:05 UTC (1451663345)
[    1.689269] ALSA device list:
[    1.689273]   No soundcards found.
[    1.691473] Freeing unused kernel memory: 848K (ffffffff81675000 - ffffffff81749000)
[    1.860844] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
[    1.941825] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    1.944858] scsi host0: usb-storage 1-1.2:1.0
[    2.009931] usb 1-1.3: new low-speed USB device number 5 using xhci_hcd
[    2.021059] mmc0: BKOPS_EN bit is not set
[    2.037450] mmc0: Got command interrupt 0x00000001 even though no command operation was in progress.
[    2.078163] mmc0: new HS200 MMC card at address 0001
[    2.078801] mmcblk0: mmc0:0001 NCard  28.9 GiB 
[    2.079251] mmcblk0boot0: mmc0:0001 NCard  partition 1 4.00 MiB
[    2.080330] mmcblk0boot1: mmc0:0001 NCard  partition 2 4.00 MiB
[    2.081215] mmcblk0rpmb: mmc0:0001 NCard  partition 3 4.00 MiB
[    2.095137] usb 1-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.095167] usb 1-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.110682] input: Cypress  PS2toUSB KBM Bridge V2.02a as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04B4:00FF.0001/input/input0
[    2.111189] hid-generic 0003:04B4:00FF.0001: input,hidraw0: USB HID v1.00 Keyboard [Cypress  PS2toUSB KBM Bridge V2.02a] on usb-0000:00:14.0-1.3/input0
[    2.111502]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    2.120558] input: Cypress  PS2toUSB KBM Bridge V2.02a as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04B4:00FF.0002/input/input1
[    2.121294] hid-generic 0003:04B4:00FF.0002: input,hidraw1: USB HID v1.00 Mouse [Cypress  PS2toUSB KBM Bridge V2.02a] on usb-0000:00:14.0-1.3/input1
[    2.121600]  mmcblk0boot1: unknown partition table
[    2.129269]  mmcblk0boot0: unknown partition table
[    3.094053] scsi 0:0:0:0: Direct-Access     Generic  USB Flash Drive  1.00 PQ: 0 ANSI: 2
[    3.095031] sd 0:0:0:0: [sda] 2077184 512-byte logical blocks: (1.06 GB/1014 MiB)
[    3.095343] sd 0:0:0:0: [sda] Write Protect is off
[    3.095354] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[    3.095633] sd 0:0:0:0: [sda] No Caching mode page found
[    3.095642] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    3.117289]  sda: sda1
[    3.119089] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.345935] Clocksource tsc unstable (delta = 78183179 ns)
[    3.346304] Switched to clocksource refined-jiffies
[    4.061905] random: nonblocking pool is initialized
[    4.182816] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.479459] udevd[371]: starting version 182
[    7.073687] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    7.094345] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    7.147753] [drm] Memory usable by graphics device = 2048M
[    7.147759] [drm] Replacing VGA console driver
[    7.147767] checking generic (80000000 1e0000) vs hw (80000000 10000000)
[    7.147770] fb: switching to inteldrmfb from EFI VGA
[    7.147852] Console: switching to colour dummy device 80x25
[    7.164093] i915 0000:00:02.0: irq 88 for MSI/MSI-X
[    7.164113] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.164116] [drm] Driver supports precise vblank timestamp query.
[    7.258828] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.455573] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[    7.455597] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[    7.455603] usb 1-2: hub failed to enable device, error -22
[    7.603639] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[    7.603663] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[    7.603670] usb 1-2: hub failed to enable device, error -22
[    7.720380] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[    7.744668] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b0e9600
[    7.744677] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b0e9648
[    7.744683] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b0e9690
[    7.774122] r8152 1-2:1.0 eth0: v1.06.1 (2014/10/01)
[    7.774287] usbcore: registered new interface driver r8152
[    7.821089] usbcore: registered new interface driver cdc_ether
[    7.943357] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[    8.050722] fbcon: inteldrmfb (fb0) is primary device
[    8.899351] [drm:intel_pipe_config_compare] *ERROR* mismatch in dpll_hw_state.dpll (expected 0x20002000, found 0x20000000)
[    8.899352] ------------[ cut here ]------------
[    8.899355] WARNING: CPU: 0 PID: 379 at drivers/gpu/drm/i915/intel_display.c:10659 0xffffffffa0088601()
[    8.899356] pipe state doesn't match!
[    8.899368] Modules linked in: cdc_ether usbnet r8152 mii i915(+) 8250 serial_core i2c_hid drm_kms_helper iosf_mbi intel_gtt acpi_pad firmware_class pwm_lpss
[    8.899372] CPU: 0 PID: 379 Comm: udevd Not tainted 3.17.4-porteus #1
[    8.899373] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CENOVO, BIOS 5.6.5 05/23/2015
[    8.899377]  0000000000000000 ffffffff8149f1fe ffff880079a6b398 ffffffff81033a76
[    8.899380]  ffffffffa0088601 ffff880079edf000 ffff880079a6b3e8 ffff880079a6b418
[    8.899383]  ffff880079edf708 ffffffff81033ad2 ffffffffa00da434 000001cd00000018
[    8.899384] Call Trace:
[    8.899388]  [<ffffffff8149f1fe>] ? 0xffffffff8149f1fe
[    8.899389]  [<ffffffff81033a76>] ? 0xffffffff81033a76
[    8.899392]  [<ffffffffa0088601>] ? 0xffffffffa0088601
[    8.899394]  [<ffffffff81033ad2>] ? 0xffffffff81033ad2
[    8.899396]  [<ffffffffa0088601>] ? 0xffffffffa0088601
[    8.899398]  [<ffffffff81050641>] ? 0xffffffff81050641
[    8.899402]  [<ffffffffa0094b46>] ? 0xffffffffa0094b46
[    8.899404]  [<ffffffffa0094e2e>] ? 0xffffffffa0094e2e
[    8.899406]  [<ffffffffa0095c61>] ? 0xffffffffa0095c61
[    8.899408]  [<ffffffff812cd325>] ? 0xffffffff812cd325
[    8.899410]  [<ffffffffa003496f>] ? 0xffffffffa003496f
[    8.899412]  [<ffffffffa003499e>] ? 0xffffffffa003499e
[    8.899414]  [<ffffffffa009dfc1>] ? 0xffffffffa009dfc1
[    8.899415]  [<ffffffffa0035c37>] ? 0xffffffffa0035c37
[    8.899417]  [<ffffffffa009dfcf>] ? 0xffffffffa009dfcf
[    8.899419]  [<ffffffff81266827>] ? 0xffffffff81266827
[    8.899421]  [<ffffffff812b5caf>] ? 0xffffffff812b5caf
[    8.899423]  [<ffffffff812b72ce>] ? 0xffffffff812b72ce
[    8.899425]  [<ffffffff812b787e>] ? 0xffffffff812b787e
[    8.899426]  [<ffffffff8126378e>] ? 0xffffffff8126378e
[    8.899428]  [<ffffffff810478cd>] ? 0xffffffff810478cd
[    8.899430]  [<ffffffff81047ae3>] ? 0xffffffff81047ae3
[    8.899431]  [<ffffffff8126a5a6>] ? 0xffffffff8126a5a6
[    8.899434]  [<ffffffffa0035fdc>] ? 0xffffffffa0035fdc
[    8.899436]  [<ffffffffa0080748>] ? 0xffffffffa0080748
[    8.899438]  [<ffffffffa00bc3e1>] ? 0xffffffffa00bc3e1
[    8.899439]  [<ffffffff8122b0e0>] ? 0xffffffff8122b0e0
[    8.899441]  [<ffffffff810567a3>] ? 0xffffffff810567a3
[    8.899443]  [<ffffffff8144bbc4>] ? 0xffffffff8144bbc4
[    8.899444]  [<ffffffff810c3050>] ? 0xffffffff810c3050
[    8.899446]  [<ffffffff8122b5e9>] ? 0xffffffff8122b5e9
[    8.899448]  [<ffffffff812dbb98>] ? 0xffffffff812dbb98
[    8.899450]  [<ffffffff81497608>] ? 0xffffffff81497608
[    8.899451]  [<ffffffff812dcfab>] ? 0xffffffff812dcfab
[    8.899453]  [<ffffffff81229398>] ? 0xffffffff81229398
[    8.899455]  [<ffffffff812c80ce>] ? 0xffffffff812c80ce
[    8.899457]  [<ffffffff812ca4a2>] ? 0xffffffff812ca4a2
[    8.899459]  [<ffffffff812e56cb>] ? 0xffffffff812e56cb
[    8.899461]  [<ffffffff8124aec6>] ? 0xffffffff8124aec6
[    8.899463]  [<ffffffff8124afca>] ? 0xffffffff8124afca
[    8.899465]  [<ffffffff812defea>] ? 0xffffffff812defea
[    8.899467]  [<ffffffff812df1a2>] ? 0xffffffff812df1a2
[    8.899469]  [<ffffffff812df14f>] ? 0xffffffff812df14f
[    8.899470]  [<ffffffff812dd8ec>] ? 0xffffffff812dd8ec
[    8.899472]  [<ffffffff812de8d2>] ? 0xffffffff812de8d2
[    8.899474]  [<ffffffff812df6a1>] ? 0xffffffff812df6a1
[    8.899476]  [<ffffffffa00e6000>] ? 0xffffffffa00e6000
[    8.899478]  [<ffffffff8100028f>] ? 0xffffffff8100028f
[    8.899480]  [<ffffffff8107cb41>] ? 0xffffffff8107cb41
[    8.899482]  [<ffffffff8107ad76>] ? 0xffffffff8107ad76
[    8.899485]  [<ffffffff8107cf38>] ? 0xffffffff8107cf38
[    8.899487]  [<ffffffff814a3e12>] ? 0xffffffff814a3e12
[    8.899488] ---[ end trace 1fb4c549e3c83702 ]---
[    9.135381] [drm:intel_pipe_config_compare] *ERROR* mismatch in dpll_hw_state.dpll (expected 0x20002000, found 0x20000000)
[    9.135382] ------------[ cut here ]------------
[    9.135384] WARNING: CPU: 0 PID: 379 at drivers/gpu/drm/i915/intel_display.c:10659 0xffffffffa0088601()
[    9.135385] pipe state doesn't match!
[    9.135394] Modules linked in: cdc_ether usbnet r8152 mii i915(+) 8250 serial_core i2c_hid drm_kms_helper iosf_mbi intel_gtt acpi_pad firmware_class pwm_lpss
[    9.135397] CPU: 0 PID: 379 Comm: udevd Tainted: G        W      3.17.4-porteus #1
[    9.135398] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CENOVO, BIOS 5.6.5 05/23/2015
[    9.135402]  0000000000000000 ffffffff8149f1fe ffff880079a6b398 ffffffff81033a76
[    9.135405]  ffffffffa0088601 ffff880079edf000 ffff880079a6b3e8 ffff880079a6b418
[    9.135407]  ffff880079edf708 ffffffff81033ad2 ffffffffa00da434 000001cd00000018
[    9.135408] Call Trace:
[    9.135410]  [<ffffffff8149f1fe>] ? 0xffffffff8149f1fe
[    9.135412]  [<ffffffff81033a76>] ? 0xffffffff81033a76
[    9.135414]  [<ffffffffa0088601>] ? 0xffffffffa0088601
[    9.135416]  [<ffffffff81033ad2>] ? 0xffffffff81033ad2
[    9.135418]  [<ffffffffa0088601>] ? 0xffffffffa0088601
[    9.135422]  [<ffffffffa0094b46>] ? 0xffffffffa0094b46
[    9.135424]  [<ffffffffa0094e2e>] ? 0xffffffffa0094e2e
[    9.135426]  [<ffffffffa0095c61>] ? 0xffffffffa0095c61
[    9.135428]  [<ffffffff812cd325>] ? 0xffffffff812cd325
[    9.135430]  [<ffffffffa003496f>] ? 0xffffffffa003496f
[    9.135432]  [<ffffffffa003499e>] ? 0xffffffffa003499e
[    9.135433]  [<ffffffffa009dfc1>] ? 0xffffffffa009dfc1
[    9.135435]  [<ffffffffa0035c37>] ? 0xffffffffa0035c37
[    9.135437]  [<ffffffffa009dfcf>] ? 0xffffffffa009dfcf
[    9.135439]  [<ffffffff81266827>] ? 0xffffffff81266827
[    9.135441]  [<ffffffff812b5caf>] ? 0xffffffff812b5caf
[    9.135442]  [<ffffffff812b72ce>] ? 0xffffffff812b72ce
[    9.135444]  [<ffffffff812b787e>] ? 0xffffffff812b787e
[    9.135446]  [<ffffffff8126378e>] ? 0xffffffff8126378e
[    9.135448]  [<ffffffff810478cd>] ? 0xffffffff810478cd
[    9.135449]  [<ffffffff81047ae3>] ? 0xffffffff81047ae3
[    9.135451]  [<ffffffff8126a5a6>] ? 0xffffffff8126a5a6
[    9.135453]  [<ffffffffa0035fdc>] ? 0xffffffffa0035fdc
[    9.135455]  [<ffffffffa0080748>] ? 0xffffffffa0080748
[    9.135457]  [<ffffffffa00bc3e1>] ? 0xffffffffa00bc3e1
[    9.135459]  [<ffffffff8122b0e0>] ? 0xffffffff8122b0e0
[    9.135461]  [<ffffffff810567a3>] ? 0xffffffff810567a3
[    9.135462]  [<ffffffff8144bbc4>] ? 0xffffffff8144bbc4
[    9.135464]  [<ffffffff810c3050>] ? 0xffffffff810c3050
[    9.135466]  [<ffffffff8122b5e9>] ? 0xffffffff8122b5e9
[    9.135468]  [<ffffffff812dbb98>] ? 0xffffffff812dbb98
[    9.135469]  [<ffffffff81497608>] ? 0xffffffff81497608
[    9.135471]  [<ffffffff812dcfab>] ? 0xffffffff812dcfab
[    9.135473]  [<ffffffff81229398>] ? 0xffffffff81229398
[    9.135475]  [<ffffffff812c80ce>] ? 0xffffffff812c80ce
[    9.135477]  [<ffffffff812ca4a2>] ? 0xffffffff812ca4a2
[    9.135478]  [<ffffffff812e56cb>] ? 0xffffffff812e56cb
[    9.135480]  [<ffffffff8124aec6>] ? 0xffffffff8124aec6
[    9.135482]  [<ffffffff8124afca>] ? 0xffffffff8124afca
[    9.135484]  [<ffffffff812defea>] ? 0xffffffff812defea
[    9.135486]  [<ffffffff812df1a2>] ? 0xffffffff812df1a2
[    9.135488]  [<ffffffff812df14f>] ? 0xffffffff812df14f
[    9.135490]  [<ffffffff812dd8ec>] ? 0xffffffff812dd8ec
[    9.135491]  [<ffffffff812de8d2>] ? 0xffffffff812de8d2
[    9.135494]  [<ffffffff812df6a1>] ? 0xffffffff812df6a1
[    9.135495]  [<ffffffffa00e6000>] ? 0xffffffffa00e6000
[    9.135497]  [<ffffffff8100028f>] ? 0xffffffff8100028f
[    9.135500]  [<ffffffff8107cb41>] ? 0xffffffff8107cb41
[    9.135501]  [<ffffffff8107ad76>] ? 0xffffffff8107ad76
[    9.135504]  [<ffffffff8107cf38>] ? 0xffffffff8107cf38
[    9.135506]  [<ffffffff814a3e12>] ? 0xffffffff814a3e12
[    9.135508] ---[ end trace 1fb4c549e3c83703 ]---
[    9.138018] Console: switching to colour frame buffer device 240x67
[    9.160254] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.160258] i915 0000:00:02.0: registered panic notifier
[    9.167599] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.168536] acpi device:09: registered as cooling_device4
[    9.168704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    9.169314] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0

kultex
White ninja
White ninja
Posts: 9
Joined: 30 Dec 2015, 12:11
Distribution: fluxflux
Location: Austria

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#13 by kultex » 01 Jan 2016, 16:31

and var/log/messages

Code: Select all

Jan  1 15:49:12 porteus syslogd 1.5.0: restart.
Jan  1 15:49:13 porteus mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3" 
Jan  1 15:49:13 porteus mtp-probe: bus: 1, device: 5 was not an MTP device 
Jan  1 15:49:13 porteus mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2" 
Jan  1 15:49:13 porteus mtp-probe: bus: 1, device: 4 was not an MTP device 
Jan  1 15:49:13 porteus mtp-probe: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2" 
Jan  1 15:49:13 porteus mtp-probe: bus: 1, device: 3 was not an MTP device 
Jan  1 15:49:13 porteus kernel: klogd 1.5.0, log source = /proc/kmsg started.
Jan  1 15:49:13 porteus kernel: [    0.000000] Initializing cgroup subsys cpu
Jan  1 15:49:13 porteus kernel: [    0.000000] Linux version 3.17.4-porteus (root@porteus) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 12 12:48:28 Local time zone must be set--
Jan  1 15:49:13 porteus kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/syslinux/vmlinuz root=/dev/sda1
Jan  1 15:49:13 porteus kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007ba96fff] usable
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000007ba97000-0x000000007bac6fff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000007bac7000-0x000000007baf9fff] ACPI data
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000007bafa000-0x000000007c1f9fff] ACPI NVS
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000007c1fa000-0x000000007c465fff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000007c466000-0x000000007c569fff] type 20
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x000000007c56a000-0x000000007cbfffff] usable
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Jan  1 15:49:13 porteus kernel: [    0.000000] NX (Execute Disable) protection: active
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: EFI v2.31 by American Megatrends
Jan  1 15:49:13 porteus kernel: [    0.000000] efi:  ACPI=0x7baf9000  ACPI 2.0=0x7baf9014  SMBIOS=0x7c465210 
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000c7a000) (11MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000c7a000-0x0000000020000000) (499MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem06: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037e9a000) (380MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000037e9a000-0x0000000037f45000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037f45000-0x000000005a750000) (552MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000005a750000-0x0000000078c00000) (484MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000078c00000-0x0000000078c20000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000078c20000-0x0000000079167000) (5MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000079167000-0x00000000791ff000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000791ff000-0x000000007b497000) (34MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem15: type=7, attr=0xf, range=[0x000000007b497000-0x000000007b90f000) (4MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem16: type=2, attr=0xf, range=[0x000000007b90f000-0x000000007b918000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem17: type=3, attr=0xf, range=[0x000000007b918000-0x000000007ba97000) (1MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem18: type=0, attr=0xf, range=[0x000000007ba97000-0x000000007bac7000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem19: type=9, attr=0xf, range=[0x000000007bac7000-0x000000007bafa000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem20: type=10, attr=0xf, range=[0x000000007bafa000-0x000000007c1fa000) (7MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem21: type=6, attr=0x800000000000000f, range=[0x000000007c1fa000-0x000000007c466000) (2MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem22: type=5, attr=0x800000000000000f, range=[0x000000007c466000-0x000000007c56a000) (1MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000007c56a000-0x000000007cbf6000) (6MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem24: type=2, attr=0xf, range=[0x000000007cbf6000-0x000000007cbf7000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000007cbf7000-0x000000007cc00000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem26: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem27: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem28: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed09000) (0MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000ffb00000-0x0000000100000000) (5MB)
Jan  1 15:49:13 porteus kernel: [    0.000000] SMBIOS 2.7 present.
Jan  1 15:49:13 porteus kernel: [    0.000000] AGP: No AGP bridge found
Jan  1 15:49:13 porteus kernel: [    0.000000] e820: last_pfn = 0x7cc00 max_arch_pfn = 0x400000000
Jan  1 15:49:13 porteus kernel: [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] init_memory_mapping: [mem 0x7b600000-0x7b7fffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] init_memory_mapping: [mem 0x78000000-0x7b5fffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] init_memory_mapping: [mem 0x20200000-0x77ffffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] init_memory_mapping: [mem 0x7b800000-0x7ba96fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] init_memory_mapping: [mem 0x7c56a000-0x7cbfffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] RAMDISK: [mem 0x37e9a000-0x37f44fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: Early table checksum verification disabled
Jan  1 15:49:13 porteus kernel: [    0.000000] No NUMA configuration found
Jan  1 15:49:13 porteus kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cbfffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] Initmem setup node 0 [mem 0x00000000-0x7cbfffff]
Jan  1 15:49:13 porteus kernel: [    0.000000]   NODE_DATA [mem 0x7b914000-0x7b917fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
Jan  1 15:49:13 porteus kernel: [    0.000000] Reserving Intel graphics stolen memory at 0x7cf00000-0x7eefffff
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Jan  1 15:49:13 porteus kernel: [    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan  1 15:49:13 porteus kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Jan  1 15:49:13 porteus kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jan  1 15:49:13 porteus kernel: [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7ba97000-0x7bac6fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7bac7000-0x7baf9fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7bafa000-0x7c1f9fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7c1fa000-0x7c465fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] PM: Registered nosave memory: [mem 0x7c466000-0x7c569fff]
Jan  1 15:49:13 porteus kernel: [    0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
Jan  1 15:49:13 porteus kernel: [    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
Jan  1 15:49:13 porteus kernel: [    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007b600000 s75072 r8192 d23232 u524288
Jan  1 15:49:13 porteus kernel: [    0.000000] Kernel command line: quiet BOOT_IMAGE=/boot/syslinux/vmlinuz root=/dev/sda1
Jan  1 15:49:13 porteus kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 15:49:13 porteus kernel: [    0.000000] AGP: Checking aperture...
Jan  1 15:49:13 porteus kernel: [    0.000000] AGP: No AGP bridge found
Jan  1 15:49:13 porteus kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 15:49:13 porteus kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jan  1 15:49:13 porteus kernel: [    0.000000] ^ICONFIG_RCU_FANOUT set to non-default value of 32
Jan  1 15:49:13 porteus kernel: [    0.000000] ^IDump stacks of tasks blocking RCU-preempt GP.
Jan  1 15:49:13 porteus kernel: [    0.000000] ^IRCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
Jan  1 15:49:13 porteus kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 15:49:13 porteus kernel: [    0.000000] NR_IRQS:4352 nr_irqs:1024 0
Jan  1 15:49:13 porteus kernel: [    0.000000] Console: colour dummy device 80x25
Jan  1 15:49:13 porteus kernel: [    0.000000] console [tty0] enabled
Jan  1 15:49:13 porteus kernel: [    0.000000] Maximum core-clock to bus-clock ratio: 0x10
Jan  1 15:49:13 porteus kernel: [    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
Jan  1 15:49:13 porteus kernel: [    0.000000] TSC runs at 1331200 KHz
Jan  1 15:49:13 porteus kernel: [    0.000000] lapic_timer_frequency = 83200
Jan  1 15:49:13 porteus kernel: [    0.000000] tsc: Detected 1331.200 MHz processor
Jan  1 15:49:13 porteus kernel: [    0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.40 BogoMIPS (lpj=1331200)
Jan  1 15:49:13 porteus kernel: [    0.000026] pid_max: default: 32768 minimum: 301
Jan  1 15:49:13 porteus kernel: [    0.000041] ACPI: Core revision 20140724
Jan  1 15:49:13 porteus kernel: [    0.043012] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jan  1 15:49:13 porteus kernel: [    0.044426] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jan  1 15:49:13 porteus kernel: [    0.045089] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 15:49:13 porteus kernel: [    0.045103] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 15:49:13 porteus kernel: [    0.045491] Initializing cgroup subsys net_cls
Jan  1 15:49:13 porteus kernel: [    0.045526] CPU: Physical Processor ID: 0
Jan  1 15:49:13 porteus kernel: [    0.045530] CPU: Processor Core ID: 0
Jan  1 15:49:13 porteus kernel: [    0.050498] mce: CPU supports 6 MCE banks
Jan  1 15:49:13 porteus kernel: [    0.050511] CPU0: Thermal monitoring enabled (TM1)
Jan  1 15:49:13 porteus kernel: [    0.050525] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Jan  1 15:49:13 porteus kernel: [    0.050525] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
Jan  1 15:49:13 porteus kernel: [    0.050688] Freeing SMP alternatives memory: 12K (ffffffff81749000 - ffffffff8174c000)
Jan  1 15:49:13 porteus kernel: [    0.055532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
Jan  1 15:49:13 porteus kernel: [    0.065559] ...trying to set up timer (IRQ0) through the 8259A ...
Jan  1 15:49:13 porteus kernel: [    0.065563] ..... (found apic 0 pin 0) ...
Jan  1 15:49:13 porteus kernel: [    0.075569] ....... works.
Jan  1 15:49:13 porteus kernel: [    0.075573] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (fam: 06, model: 37, stepping: 08)
Jan  1 15:49:13 porteus kernel: [    0.075622] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
Jan  1 15:49:13 porteus kernel: [    0.075643] ... version:                3
Jan  1 15:49:13 porteus kernel: [    0.075647] ... bit width:              40
Jan  1 15:49:13 porteus kernel: [    0.075651] ... generic registers:      2
Jan  1 15:49:13 porteus kernel: [    0.075654] ... value mask:             000000ffffffffff
Jan  1 15:49:13 porteus kernel: [    0.075658] ... max period:             000000ffffffffff
Jan  1 15:49:13 porteus kernel: [    0.075661] ... fixed-purpose events:   3
Jan  1 15:49:13 porteus kernel: [    0.075664] ... event mask:             0000000700000003
Jan  1 15:49:13 porteus kernel: [    0.081782] x86: Booting SMP configuration:
Jan  1 15:49:13 porteus kernel: [    0.081789] .... node  #0, CPUs:      #1 #2 #3
Jan  1 15:49:13 porteus kernel: [    0.140246] x86: Booted up 1 node, 4 CPUs
Jan  1 15:49:13 porteus kernel: [    0.140254] smpboot: Total of 4 processors activated (10649.60 BogoMIPS)
Jan  1 15:49:13 porteus kernel: [    0.141169] devtmpfs: initialized
Jan  1 15:49:13 porteus kernel: [    0.141629] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
Jan  1 15:49:13 porteus kernel: [    0.141636] PM: Registering ACPI NVS region [mem 0x7bafa000-0x7c1f9fff] (7340032 bytes)
Jan  1 15:49:13 porteus kernel: [    0.142093] pinctrl core: initialized pinctrl subsystem
Jan  1 15:49:13 porteus kernel: [    0.142401] NET: Registered protocol family 16
Jan  1 15:49:13 porteus kernel: [    0.142676] cpuidle: using governor ladder
Jan  1 15:49:13 porteus kernel: [    0.142682] cpuidle: using governor menu
Jan  1 15:49:13 porteus kernel: [    0.142765] ACPI: bus type PCI registered
Jan  1 15:49:13 porteus kernel: [    0.142771] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan  1 15:49:13 porteus kernel: [    0.142922] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jan  1 15:49:13 porteus kernel: [    0.142929] PCI: not using MMCONFIG
Jan  1 15:49:13 porteus kernel: [    0.142933] PCI: Using configuration type 1 for base access
Jan  1 15:49:13 porteus kernel: [    0.152943] ACPI: Added _OSI(Module Device)
Jan  1 15:49:13 porteus kernel: [    0.152950] ACPI: Added _OSI(Processor Device)
Jan  1 15:49:13 porteus kernel: [    0.152954] ACPI: Added _OSI(3.0 _SCP Extensions)
Jan  1 15:49:13 porteus kernel: [    0.152958] ACPI: Added _OSI(Processor Aggregator Device)
Jan  1 15:49:13 porteus kernel: [    0.214847] ACPI: Interpreter enabled
Jan  1 15:49:13 porteus kernel: [    0.214926] ACPI: (supports S0 S5)
Jan  1 15:49:13 porteus kernel: [    0.214931] ACPI: Using IOAPIC for interrupt routing
Jan  1 15:49:13 porteus kernel: [    0.214989] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jan  1 15:49:13 porteus kernel: [    0.225745] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
Jan  1 15:49:13 porteus kernel: [    0.225752] PCI: not using MMCONFIG
Jan  1 15:49:13 porteus kernel: [    0.225788] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jan  1 15:49:13 porteus kernel: [    0.230553] ACPI: Power Resource [USBC] (on)
Jan  1 15:49:13 porteus kernel: [    0.236251] ACPI: Power Resource [WWPR] (off)
Jan  1 15:49:13 porteus kernel: [    0.245330] ACPI: Power Resource [PLPE] (on)
Jan  1 15:49:13 porteus kernel: [    0.252401] ACPI: Power Resource [CLK0] (on)
Jan  1 15:49:13 porteus kernel: [    0.252525] ACPI: Power Resource [CLK1] (on)
Jan  1 15:49:13 porteus kernel: [    0.254528] ACPI: Power Resource [CLK0] (on)
Jan  1 15:49:13 porteus kernel: [    0.254635] ACPI: Power Resource [CLK1] (on)
Jan  1 15:49:13 porteus kernel: [    0.261290] ACPI: Power Resource [P28X] (off)
Jan  1 15:49:13 porteus kernel: [    0.261404] ACPI: Power Resource [P18X] (off)
Jan  1 15:49:13 porteus kernel: [    0.261509] ACPI: Power Resource [P28P] (off)
Jan  1 15:49:13 porteus kernel: [    0.261614] ACPI: Power Resource [P18P] (off)
Jan  1 15:49:13 porteus kernel: [    0.261726] ACPI: Power Resource [P28T] (off)
Jan  1 15:49:13 porteus kernel: [    0.261842] ACPI: Power Resource [P18T] (off)
Jan  1 15:49:13 porteus kernel: [    0.261959] ACPI: Power Resource [P1XT] (off)
Jan  1 15:49:13 porteus kernel: [    0.267580] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jan  1 15:49:13 porteus kernel: [    0.267595] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
Jan  1 15:49:13 porteus kernel: [    0.267725] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
Jan  1 15:49:13 porteus kernel: [    0.268826] PCI host bridge to bus 0000:00
Jan  1 15:49:13 porteus kernel: [    0.268836] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 15:49:13 porteus kernel: [    0.268843] pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
Jan  1 15:49:13 porteus kernel: [    0.268859] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
Jan  1 15:49:13 porteus kernel: [    0.268866] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
Jan  1 15:49:13 porteus kernel: [    0.268872] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Jan  1 15:49:13 porteus kernel: [    0.268879] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
Jan  1 15:49:13 porteus kernel: [    0.268885] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
Jan  1 15:49:13 porteus kernel: [    0.268892] pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000]
Jan  1 15:49:13 porteus kernel: [    0.268898] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90cffffe]
Jan  1 15:49:13 porteus kernel: [    0.268904] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
Jan  1 15:49:13 porteus kernel: [    0.271494] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.271662] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.271828] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.272006] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.272170] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.272334] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.272498] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.272662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Jan  1 15:49:13 porteus kernel: [    0.283826] vgaarb: setting as boot device: PCI:0000:00:02.0
Jan  1 15:49:13 porteus kernel: [    0.283834] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Jan  1 15:49:13 porteus kernel: [    0.283840] vgaarb: loaded
Jan  1 15:49:13 porteus kernel: [    0.283845] vgaarb: bridge control possible 0000:00:02.0
Jan  1 15:49:13 porteus kernel: [    0.284123] SCSI subsystem initialized
Jan  1 15:49:13 porteus kernel: [    0.284231] ACPI: bus type USB registered
Jan  1 15:49:13 porteus kernel: [    0.284296] usbcore: registered new interface driver usbfs
Jan  1 15:49:13 porteus kernel: [    0.284327] usbcore: registered new interface driver hub
Jan  1 15:49:13 porteus kernel: [    0.284385] usbcore: registered new device driver usb
Jan  1 15:49:13 porteus kernel: [    0.284441] Linux video capture interface: v2.00
Jan  1 15:49:13 porteus kernel: [    0.284595] Advanced Linux Sound Architecture Driver Initialized.
Jan  1 15:49:13 porteus kernel: [    0.284600] PCI: Using ACPI for IRQ routing
Jan  1 15:49:13 porteus kernel: [    0.284997] Switched to clocksource refined-jiffies
Jan  1 15:49:13 porteus kernel: [    0.285102] pnp: PnP ACPI init
Jan  1 15:49:13 porteus kernel: [    0.285497] system 00:01: [io  0x0680-0x069f] has been reserved
Jan  1 15:49:13 porteus kernel: [    0.285506] system 00:01: [io  0x0400-0x047f] has been reserved
Jan  1 15:49:13 porteus kernel: [    0.285513] system 00:01: [io  0x0500-0x05fe] has been reserved
Jan  1 15:49:13 porteus kernel: [    0.285520] system 00:01: [io  0x0600-0x061f] has been reserved
Jan  1 15:49:13 porteus kernel: [    0.285527] system 00:01: [io  0x164e-0x164f] has been reserved
Jan  1 15:49:13 porteus kernel: [    0.290062] pnp: PnP ACPI: found 4 devices
Jan  1 15:49:13 porteus kernel: [    0.295417] NET: Registered protocol family 2
Jan  1 15:49:13 porteus kernel: [    0.295842] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Jan  1 15:49:13 porteus kernel: [    0.295957] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
Jan  1 15:49:13 porteus kernel: [    0.296089] TCP: Hash tables configured (established 16384 bind 16384)
Jan  1 15:49:13 porteus kernel: [    0.296142] TCP: reno registered
Jan  1 15:49:13 porteus kernel: [    0.296156] UDP hash table entries: 1024 (order: 3, 32768 bytes)
Jan  1 15:49:13 porteus kernel: [    0.296191] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Jan  1 15:49:13 porteus kernel: [    0.296296] NET: Registered protocol family 1
Jan  1 15:49:13 porteus kernel: [    0.297121] Unpacking initramfs...
Jan  1 15:49:13 porteus kernel: [    0.488535] Freeing initrd memory: 684K (ffff880037e9a000 - ffff880037f45000)
Jan  1 15:49:13 porteus kernel: [    0.489601] futex hash table entries: 1024 (order: 4, 65536 bytes)
Jan  1 15:49:13 porteus kernel: [    0.493875] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 15:49:13 porteus kernel: [    0.494025] fuse init (API version 7.23)
Jan  1 15:49:13 porteus kernel: [    0.494218] SGI XFS with ACLs, security attributes, realtime, no debug enabled
Jan  1 15:49:13 porteus kernel: [    0.495209] aufs 3.17-20141110
Jan  1 15:49:13 porteus kernel: [    0.495220] msgmni has been set to 3884
Jan  1 15:49:13 porteus kernel: [    0.495619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan  1 15:49:13 porteus kernel: [    0.495626] io scheduler noop registered
Jan  1 15:49:13 porteus kernel: [    0.495630] io scheduler deadline registered (default)
Jan  1 15:49:13 porteus kernel: [    0.495777] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan  1 15:49:13 porteus kernel: [    0.495823] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan  1 15:49:13 porteus kernel: [    0.495928] efifb: probing for efifb
Jan  1 15:49:13 porteus kernel: [    0.495952] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000480000, using 1920k, total 1920k
Jan  1 15:49:13 porteus kernel: [    0.495958] efifb: mode is 800x600x32, linelength=3200, pages=1
Jan  1 15:49:13 porteus kernel: [    0.495961] efifb: scrolling: redraw
Jan  1 15:49:13 porteus kernel: [    0.495967] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Jan  1 15:49:13 porteus kernel: [    0.551562] Console: switching to colour frame buffer device 100x37
Jan  1 15:49:13 porteus kernel: [    0.606608] fb0: EFI VGA frame buffer device
Jan  1 15:49:13 porteus kernel: [    0.611815] Linux agpgart interface v0.103
Jan  1 15:49:13 porteus kernel: [    0.611855] [drm] Initialized drm 1.1.0 20060810
Jan  1 15:49:13 porteus kernel: [    0.611996] ACPI: Battery Slot [BMBT] (battery present)
Jan  1 15:49:13 porteus kernel: [    0.613593] loop: module loaded
Jan  1 15:49:13 porteus kernel: [    0.613716] usbcore: registered new interface driver rtsx_usb
Jan  1 15:49:13 porteus kernel: [    0.615416] Fusion MPT base driver 3.04.20
Jan  1 15:49:13 porteus kernel: [    0.615421] Copyright (c) 1999-2008 LSI Corporation
Jan  1 15:49:13 porteus kernel: [    0.615436] Fusion MPT SPI Host driver 3.04.20
Jan  1 15:49:13 porteus kernel: [    0.615473] Fusion MPT SAS Host driver 3.04.20
Jan  1 15:49:13 porteus kernel: [    0.615524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 15:49:13 porteus kernel: [    0.615528] ehci-pci: EHCI PCI platform driver
Jan  1 15:49:13 porteus kernel: [    0.615556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 15:49:13 porteus kernel: [    0.615566] ohci-pci: OHCI PCI platform driver
Jan  1 15:49:13 porteus kernel: [    0.615595] uhci_hcd: USB Universal Host Controller Interface driver
Jan  1 15:49:13 porteus kernel: [    0.615848] xhci_hcd 0000:00:14.0: xHCI Host Controller
Jan  1 15:49:13 porteus kernel: [    0.615866] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
Jan  1 15:49:13 porteus kernel: [    0.616758] hub 1-0:1.0: USB hub found
Jan  1 15:49:13 porteus kernel: [    0.616783] hub 1-0:1.0: 6 ports detected
Jan  1 15:49:13 porteus kernel: [    0.617987] xhci_hcd 0000:00:14.0: xHCI Host Controller
Jan  1 15:49:13 porteus kernel: [    0.617999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
Jan  1 15:49:13 porteus kernel: [    0.618374] hub 2-0:1.0: USB hub found
Jan  1 15:49:13 porteus kernel: [    0.618396] hub 2-0:1.0: 1 port detected
Jan  1 15:49:13 porteus kernel: [    0.618768] usbcore: registered new interface driver usb-storage
Jan  1 15:49:13 porteus kernel: [    0.618792] usbcore: registered new interface driver ums-alauda
Jan  1 15:49:13 porteus kernel: [    0.618814] usbcore: registered new interface driver ums-cypress
Jan  1 15:49:13 porteus kernel: [    0.618835] usbcore: registered new interface driver ums-datafab
Jan  1 15:49:13 porteus kernel: [    0.618860] usbcore: registered new interface driver ums_eneub6250
Jan  1 15:49:13 porteus kernel: [    0.618882] usbcore: registered new interface driver ums-freecom
Jan  1 15:49:13 porteus kernel: [    0.618903] usbcore: registered new interface driver ums-isd200
Jan  1 15:49:13 porteus kernel: [    0.618924] usbcore: registered new interface driver ums-jumpshot
Jan  1 15:49:13 porteus kernel: [    0.618944] usbcore: registered new interface driver ums-karma
Jan  1 15:49:13 porteus kernel: [    0.618965] usbcore: registered new interface driver ums-onetouch
Jan  1 15:49:13 porteus kernel: [    0.618999] usbcore: registered new interface driver ums-realtek
Jan  1 15:49:13 porteus kernel: [    0.619020] usbcore: registered new interface driver ums-sddr09
Jan  1 15:49:13 porteus kernel: [    0.619046] usbcore: registered new interface driver ums-sddr55
Jan  1 15:49:13 porteus kernel: [    0.619068] usbcore: registered new interface driver ums-usbat
Jan  1 15:49:13 porteus kernel: [    0.619138] i8042: PNP: No PS/2 controller found. Probing ports directly.
Jan  1 15:49:13 porteus kernel: [    1.370722] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 15:49:13 porteus kernel: [    1.504543] hub 1-1:1.0: USB hub found
Jan  1 15:49:13 porteus kernel: [    1.504834] hub 1-1:1.0: 4 ports detected
Jan  1 15:49:13 porteus kernel: [    1.626710] usb 1-2: new high-speed USB device number 3 using xhci_hcd
Jan  1 15:49:13 porteus kernel: [    1.660808] Switched to clocksource tsc
Jan  1 15:49:13 porteus kernel: [    1.662729] mousedev: PS/2 mouse device common for all mice
Jan  1 15:49:13 porteus kernel: [    1.663621] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
Jan  1 15:49:13 porteus kernel: [    1.663693] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram
Jan  1 15:49:13 porteus kernel: [    1.663757] Intel P-state driver initializing.
Jan  1 15:49:13 porteus kernel: [    1.664314] sdhci: Secure Digital Host Controller Interface driver
Jan  1 15:49:13 porteus kernel: [    1.664326] sdhci: Copyright(c) Pierre Ossman
Jan  1 15:49:13 porteus kernel: [    1.665807] sdhci-acpi 80860F14:00: No vmmc regulator found
Jan  1 15:49:13 porteus kernel: [    1.665826] sdhci-acpi 80860F14:00: No vqmmc regulator found
Jan  1 15:49:13 porteus kernel: [    1.667354] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
Jan  1 15:49:13 porteus kernel: [    1.669689] sdhci-acpi INT33BB:00: No vmmc regulator found
Jan  1 15:49:13 porteus kernel: [    1.669697] sdhci-acpi INT33BB:00: No vqmmc regulator found
Jan  1 15:49:13 porteus kernel: [    1.671208] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
Jan  1 15:49:13 porteus kernel: [    1.672595] sdhci-acpi 80860F14:02: No vmmc regulator found
Jan  1 15:49:13 porteus kernel: [    1.672602] sdhci-acpi 80860F14:02: No vqmmc regulator found
Jan  1 15:49:13 porteus kernel: [    1.674308] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
Jan  1 15:49:13 porteus kernel: [    1.674420] wbsd: Winbond W83L51xD SD/MMC card interface driver
Jan  1 15:49:13 porteus kernel: [    1.674424] wbsd: Copyright(c) Pierre Ossman
Jan  1 15:49:13 porteus kernel: [    1.674522] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
Jan  1 15:49:13 porteus kernel: [    1.677986] usbcore: registered new interface driver vub300
Jan  1 15:49:13 porteus kernel: [    1.678045] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 15:49:13 porteus kernel: [    1.678750] EFI Variables Facility v0.08 2004-May-17
Jan  1 15:49:13 porteus kernel: [    1.684848] hidraw: raw HID events driver (C) Jiri Kosina
Jan  1 15:49:13 porteus kernel: [    1.684901] usbcore: registered new interface driver usbhid
Jan  1 15:49:13 porteus kernel: [    1.684904] usbhid: USB HID core driver
Jan  1 15:49:13 porteus kernel: [    1.685101] TCP: cubic registered
Jan  1 15:49:13 porteus kernel: [    1.685106] NET: Registered protocol family 17
Jan  1 15:49:13 porteus kernel: [    1.687956] registered taskstats version 1
Jan  1 15:49:13 porteus kernel: [    1.689130] rtc_cmos 00:00: setting system clock to 2016-01-01 15:49:05 UTC (1451663345)
Jan  1 15:49:13 porteus kernel: [    1.689269] ALSA device list:
Jan  1 15:49:13 porteus kernel: [    1.689273]   No soundcards found.
Jan  1 15:49:13 porteus kernel: [    1.691473] Freeing unused kernel memory: 848K (ffffffff81675000 - ffffffff81749000)
Jan  1 15:49:13 porteus kernel: [    1.860844] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
Jan  1 15:49:13 porteus kernel: [    1.941825] usb-storage 1-1.2:1.0: USB Mass Storage device detected
Jan  1 15:49:13 porteus kernel: [    1.944858] scsi host0: usb-storage 1-1.2:1.0
Jan  1 15:49:13 porteus kernel: [    2.009931] usb 1-1.3: new low-speed USB device number 5 using xhci_hcd
Jan  1 15:49:13 porteus kernel: [    2.021059] mmc0: BKOPS_EN bit is not set
Jan  1 15:49:13 porteus kernel: [    2.078163] mmc0: new HS200 MMC card at address 0001
Jan  1 15:49:13 porteus kernel: [    2.078801] mmcblk0: mmc0:0001 NCard  28.9 GiB 
Jan  1 15:49:13 porteus kernel: [    2.079251] mmcblk0boot0: mmc0:0001 NCard  partition 1 4.00 MiB
Jan  1 15:49:13 porteus kernel: [    2.080330] mmcblk0boot1: mmc0:0001 NCard  partition 2 4.00 MiB
Jan  1 15:49:13 porteus kernel: [    2.081215] mmcblk0rpmb: mmc0:0001 NCard  partition 3 4.00 MiB
Jan  1 15:49:13 porteus kernel: [    2.110682] input: Cypress  PS2toUSB KBM Bridge V2.02a as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04B4:00FF.0001/input/input0
Jan  1 15:49:13 porteus kernel: [    2.111189] hid-generic 0003:04B4:00FF.0001: input,hidraw0: USB HID v1.00 Keyboard [Cypress  PS2toUSB KBM Bridge V2.02a] on usb-0000:00:14.0-1.3/input0
Jan  1 15:49:13 porteus kernel: [    2.111502]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
Jan  1 15:49:13 porteus kernel: [    2.120558] input: Cypress  PS2toUSB KBM Bridge V2.02a as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04B4:00FF.0002/input/input1
Jan  1 15:49:13 porteus kernel: [    2.121294] hid-generic 0003:04B4:00FF.0002: input,hidraw1: USB HID v1.00 Mouse [Cypress  PS2toUSB KBM Bridge V2.02a] on usb-0000:00:14.0-1.3/input1
Jan  1 15:49:13 porteus kernel: [    2.121600]  mmcblk0boot1: unknown partition table
Jan  1 15:49:13 porteus kernel: [    2.129269]  mmcblk0boot0: unknown partition table
Jan  1 15:49:13 porteus kernel: [    3.094053] scsi 0:0:0:0: Direct-Access     Generic  USB Flash Drive  1.00 PQ: 0 ANSI: 2
Jan  1 15:49:13 porteus kernel: [    3.095031] sd 0:0:0:0: [sda] 2077184 512-byte logical blocks: (1.06 GB/1014 MiB)
Jan  1 15:49:13 porteus kernel: [    3.095343] sd 0:0:0:0: [sda] Write Protect is off
Jan  1 15:49:13 porteus kernel: [    3.117289]  sda: sda1
Jan  1 15:49:13 porteus kernel: [    3.119089] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan  1 15:49:13 porteus kernel: [    3.346304] Switched to clocksource refined-jiffies
Jan  1 15:49:13 porteus kernel: [    4.061905] random: nonblocking pool is initialized
Jan  1 15:49:13 porteus kernel: <30>[    6.479459] udevd[371]: starting version 182
Jan  1 15:49:13 porteus kernel: [    7.073687] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan  1 15:49:13 porteus kernel: [    7.094345] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Jan  1 15:49:13 porteus kernel: [    7.147753] [drm] Memory usable by graphics device = 2048M
Jan  1 15:49:13 porteus kernel: [    7.147759] [drm] Replacing VGA console driver
Jan  1 15:49:13 porteus kernel: [    7.147770] fb: switching to inteldrmfb from EFI VGA
Jan  1 15:49:13 porteus kernel: [    7.147852] Console: switching to colour dummy device 80x25
Jan  1 15:49:13 porteus kernel: [    7.164113] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Jan  1 15:49:13 porteus kernel: [    7.164116] [drm] Driver supports precise vblank timestamp query.
Jan  1 15:49:13 porteus kernel: [    7.258828] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Jan  1 15:49:13 porteus kernel: [    7.455573] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
Jan  1 15:49:13 porteus kernel: [    7.603639] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
Jan  1 15:49:13 porteus kernel: [    7.720380] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
Jan  1 15:49:13 porteus kernel: [    7.774122] r8152 1-2:1.0 eth0: v1.06.1 (2014/10/01)
Jan  1 15:49:13 porteus kernel: [    7.774287] usbcore: registered new interface driver r8152
Jan  1 15:49:13 porteus kernel: [    7.821089] usbcore: registered new interface driver cdc_ether
Jan  1 15:49:13 porteus kernel: [    7.943357] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
Jan  1 15:49:14 porteus kernel: [    8.050722] fbcon: inteldrmfb (fb0) is primary device
Jan  1 15:49:14 porteus kernel: [    9.138018] Console: switching to colour frame buffer device 240x67
Jan  1 15:49:14 porteus kernel: [    9.160254] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Jan  1 15:49:14 porteus kernel: [    9.160258] i915 0000:00:02.0: registered panic notifier
Jan  1 15:49:14 porteus kernel: [    9.167599] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Jan  1 15:49:14 porteus kernel: [    9.168536] acpi device:09: registered as cooling_device4
Jan  1 15:49:14 porteus kernel: [    9.168704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
Jan  1 15:49:14 porteus kernel: [    9.169314] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
Jan  1 15:49:14 porteus init: Entering runlevel: 4
Jan  1 15:49:14 porteus acpid: starting up with netlink and the input layer
Jan  1 15:49:14 porteus acpid: 4 rules loaded
Jan  1 15:49:14 porteus acpid: waiting for events: event logging is off
Jan  1 15:49:15 porteus avahi-daemon[1167]: Found user 'avahi' (UID 214) and group 'avahi' (GID 214).
Jan  1 15:49:15 porteus avahi-daemon[1167]: Successfully dropped root privileges.
Jan  1 15:49:15 porteus avahi-daemon[1167]: avahi-daemon 0.6.31 starting up.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Successfully called chroot().
Jan  1 15:49:15 porteus avahi-daemon[1167]: Successfully dropped remaining capabilities.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Loading service file /services/sftp-ssh.service.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Loading service file /services/ssh.service.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Network interface enumeration completed.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Registering HINFO record with values 'X86_64'/'LINUX'.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Server startup complete. Host name is porteus.local. Local service cookie is 621205748.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Service "porteus" (/services/ssh.service) successfully established.
Jan  1 15:49:15 porteus avahi-daemon[1167]: Service "porteus" (/services/sftp-ssh.service) successfully established.
Jan  1 15:49:15 porteus avahi-dnsconfd[1208]: Successfully connected to Avahi daemon.
Jan  1 15:49:15 porteus gpm[1215]: *** info [daemon/startup.c(136)]: 
Jan  1 15:49:15 porteus gpm[1215]: Started gpm successfully. Entered daemon mode.
Jan  1 15:49:15 porteus LAPTOP-MODE: Laptop mode enabled, active [unchanged]
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> NetworkManager (version 0.9.8.8) is starting...
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> WEXT support is enabled
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Jan  1 15:49:15 porteus dbus[389]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jan  1 15:49:15 porteus kernel: [   10.937863] NET: Registered protocol family 10
Jan  1 15:49:15 porteus polkitd[1252]: started daemon version 0.105 using authority implementation `local' version `0.105'
Jan  1 15:49:15 porteus dbus[389]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> monitoring kernel firmware directory '/lib/firmware'.
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> WiFi enabled by radio killswitch; enabled by state file
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> WWAN enabled by radio killswitch; enabled by state file
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> Networking is enabled by state file
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> (eth0): carrier is OFF
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> (eth0): new Ethernet device (driver: 'r8152' ifindex: 2)
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> (eth0): bringing up device.
Jan  1 15:49:15 porteus acpid: client connected from 1249[0:0]
Jan  1 15:49:15 porteus acpid: 1 client rule loaded
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> (eth0): preparing device.
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> (eth0): deactivating device (reason 'managed') [2]
Jan  1 15:49:15 porteus kernel: [   11.113667] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  1 15:49:15 porteus NetworkManager[1247]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/net/eth0
Jan  1 15:49:15 porteus dbus[389]: [system] Activating service name='org.freedesktop.ModemManager1' (using servicehelper)
Jan  1 15:49:16 porteus ModemManager[1263]: <info>  ModemManager (version 1.0.0) starting... 
Jan  1 15:49:16 porteus dbus[389]: [system] Successfully activated service 'org.freedesktop.ModemManager1'
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> ModemManager disappeared from bus
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> ModemManager available in the bus
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> (eth0): carrier now ON (device state 20)
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Jan  1 15:49:16 porteus kernel: [   12.746605] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Auto-activating connection 'Wired connection 1'.
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) starting connection 'Wired connection 1'
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> NetworkManager state is now CONNECTING
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan  1 15:49:16 porteus NetworkManager[1247]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan  1 15:49:17 porteus NetworkManager[1247]: <info> dhcpcd started with pid 1275
Jan  1 15:49:17 porteus NetworkManager[1247]: <info> Activation (eth0) Beginning IP6 addrconf.
Jan  1 15:49:17 porteus dhcpcd[1275]: version 6.0.5 starting
Jan  1 15:49:17 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Jan  1 15:49:17 porteus dhcpcd[1275]: eth0: soliciting an IPv6 router
Jan  1 15:49:17 porteus NetworkManager[1247]: <info> (eth0): DHCPv4 state changed nbi -> preinit
Jan  1 15:49:17 porteus dhcpcd[1275]: eth0: soliciting a DHCP lease
Jan  1 15:49:17 porteus dbus[389]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jan  1 15:49:18 porteus dbus[389]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jan  1 15:49:18 porteus dhcpcd[1275]: eth0: offered 10.0.0.84 from 10.0.0.138
Jan  1 15:49:18 porteus avahi-daemon[1167]: Registering new address record for fe80::209:4cff:fe36:1f66 on eth0.*.
Jan  1 15:49:20 porteus gnome-keyring-daemon[1407]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jan  1 15:49:20 porteus last message repeated 2 times
Jan  1 15:49:21 porteus dbus[389]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jan  1 15:49:21 porteus udisksd[1502]: udisks daemon version 2.1.0 starting
Jan  1 15:49:21 porteus dbus[389]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jan  1 15:49:21 porteus udisksd[1502]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jan  1 15:49:21 porteus dbus[389]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Jan  1 15:49:21 porteus dbus[389]: [system] Successfully activated service 'org.freedesktop.UPower'
Jan  1 15:49:23 porteus dhcpcd[1275]: eth0: leased 10.0.0.84 for 86400 seconds
Jan  1 15:49:23 porteus dhcpcd[1275]: eth0: adding host route to 10.0.0.84 via 127.0.0.1
Jan  1 15:49:23 porteus dhcpcd[1275]: eth0: adding route to 10.0.0.0/24
Jan  1 15:49:23 porteus avahi-daemon[1167]: Joining mDNS multicast group on interface eth0.IPv4 with address 10.0.0.84.
Jan  1 15:49:23 porteus avahi-daemon[1167]: New relevant interface eth0.IPv4 for mDNS.
Jan  1 15:49:23 porteus avahi-daemon[1167]: Registering new address record for 10.0.0.84 on eth0.IPv4.
Jan  1 15:49:23 porteus NetworkManager[1247]: <info> (eth0): DHCPv4 state changed preinit -> bound
Jan  1 15:49:23 porteus NetworkManager[1247]: <info>   address 10.0.0.84
Jan  1 15:49:23 porteus NetworkManager[1247]: <info>   prefix 24 (255.255.255.0)
Jan  1 15:49:23 porteus NetworkManager[1247]: <info>   gateway 10.0.0.138
Jan  1 15:49:23 porteus NetworkManager[1247]: <info>   nameserver '10.0.0.138'
Jan  1 15:49:23 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Jan  1 15:49:23 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started...
Jan  1 15:49:23 porteus avahi-daemon[1167]: Withdrawing address record for 10.0.0.84 on eth0.
Jan  1 15:49:23 porteus avahi-daemon[1167]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.0.0.84.
Jan  1 15:49:23 porteus avahi-daemon[1167]: Interface eth0.IPv4 no longer relevant for mDNS.
Jan  1 15:49:23 porteus avahi-daemon[1167]: Joining mDNS multicast group on interface eth0.IPv4 with address 10.0.0.84.
Jan  1 15:49:23 porteus avahi-daemon[1167]: New relevant interface eth0.IPv4 for mDNS.
Jan  1 15:49:23 porteus avahi-daemon[1167]: Registering new address record for 10.0.0.84 on eth0.IPv4.
Jan  1 15:49:23 porteus dhcpcd[1275]: eth0: removing IP address 10.0.0.84/24
Jan  1 15:49:23 porteus dhcpcd[1275]: eth0: removing route to 10.0.0.0/24
Jan  1 15:49:24 porteus NetworkManager[1247]: <info> (eth0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Jan  1 15:49:24 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete.
Jan  1 15:49:24 porteus NetworkManager[1247]: <info> (eth0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Jan  1 15:49:24 porteus NetworkManager[1247]: <info> NetworkManager state is now CONNECTED_GLOBAL
Jan  1 15:49:24 porteus NetworkManager[1247]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
Jan  1 15:49:24 porteus NetworkManager[1247]: <info> Activation (eth0) successful, device activated.
Jan  1 15:49:24 porteus dbus[389]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan  1 15:49:24 porteus dbus[389]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan  1 15:49:36 porteus NetworkManager[1247]: <info> (eth0): IP6 addrconf timed out or failed.
Jan  1 15:49:36 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jan  1 15:49:36 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jan  1 15:49:36 porteus NetworkManager[1247]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jan  1 15:51:40 porteus kernel: [ 1817.565911] pcmanfm-qt[1963]: segfault at 0 ip 00007f90f0ed462a sp 00007fffa689db80 error 4 in libfm-qt.so.1.0.0[7f90f0e81000+70000]
Jan  1 15:51:41 porteus kernel: [ 1836.395328] pcmanfm-qt[1998]: segfault at 0 ip 00007fdd8474262a sp 00007fff0f466af0 error 4 in libfm-qt.so.1.0.0[7fdd846ef000+70000]
EDIT: "xrandr --output UNKNOWN1 --off" solved the monitor problem

Code: Select all

guest@porteus:~$ lsmod
Module                  Size  Used by
ipv6                  201992  18 
cdc_ether               3968  0 
usbnet                 14312  1 cdc_ether
r8152                  19616  0 
mii                     2752  2 r8152,usbnet
8250                   23656  0 
i915                  614848  2 
serial_core            13968  1 8250
i2c_hid                 7988  0 
drm_kms_helper         49040  1 i915
intel_gtt               8688  1 i915
acpi_pad                4144  0 
firmware_class          4664  1 drm_kms_helper
iosf_mbi                2108  0 
pwm_lpss                1800  0 

kultex
White ninja
White ninja
Posts: 9
Joined: 30 Dec 2015, 12:11
Distribution: fluxflux
Location: Austria

Re: Atom Z3735F does not boot - how to boot with grubshell?

Post#14 by kultex » 01 Jan 2016, 21:09

I just have to tell, even Porteus boots extremly quick, that performance in Porteus is extremly low - like scrolling in Firefox or even writing in this thread or just draging a window is painful.

With the help of you I managed to get evrything in Lubuntu - I have now mouse and evrithing is very quick and normal and I think, that this are missing kernel modules in Porteus. Just compare my last post with the modules from Ubuntu in my first Post - there is also sound and bluetooth in Ubuntu, but thez are not working until now.

Is there a new trial? version of Porteus, that has this modules?

ok - found something more on this: https://plus.google.com/+IanMORRISON/posts/UNWdwRMqy3j

Post Reply