USM bug reports

Please reproduce your error on a second machine before posting, and check the error by running without saved changes or extra modules (See FAQ No. 13, "How to report a bug"). For unstable Porteus versions (alpha, beta, rc) please use the relevant thread in our "Development" section.
User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: USM bug reports

Post#136 by brokenman » 08 Aug 2014, 02:11

I've pushed the above error fix to the github ready for merging into next version.

But when I later reboot and my save.dat file is created
I don't quite understand what you mean here.

Put simply, if you change a file or create one, it is added to your 'changes' file/folder. If you don't change or create it then it is not. Your 002-xorg module doesn't get added to your changes folder and in the same way, a module from your modules folder doesn't either. Please leave this thread for bug reports only. Questions should go in the thread under 'community effort'.

The procedure I mentioned there for creating a module is for use in fresh mode.
How do i become super user?
Wear your underpants on the outside and put on a cape.

User avatar
Slaxmax
Contributor
Contributor
Posts: 403
Joined: 03 Jan 2013, 09:51
Distribution: KDE4
Location: Campinas Brazil https://goo.gl/yrxwKi

Re: USM bug reports

Post#137 by Slaxmax » 12 Aug 2014, 19:12

I tested the latest USM in slackware 14.1 i486, worked well, but in the end appears the option of merged the modules. The correct is this option does not appear when using slackware.

thanks
“DNA is like a computer program but far, far more advanced than any software ever created.”
― Bill Gates, The Road Ahead

Bogomips
Full of knowledge
Full of knowledge
Posts: 2534
Joined: 25 Jun 2014, 15:21
Distribution: 3.2.2 Cinnamon & KDE5
Location: London

Re: USM bug reports

Post#138 by Bogomips » 13 Aug 2014, 19:47

brokenman wrote:Bogomips, I just downloaded the latest Porteus-v3.0.1 KDE 32bit and ran the same commands.

Code: Select all

root@porteus:/home/guest# usm -v

 You are using USM version:  3.1.4

root@porteus:/home/guest# usm -g samba

 The following items were found.
 Choose an number to confirm.
 ctrl+c to quit

1) samba-4.1.0-i486-2.txz
2) samba-4.1.11-i486-1_slack14.1.txz
Can you think of any differences that might allow me to further troubleshoot?
Commands were always: usm -g vlc

Repeated a second time with full o/p up to FATAL ERROR in my first post of 5th Aug]. At next boot, on a barebones KDE, error was repeated. Last occurrence repeated in 2nd post of 5th Aug. No occurrence of error after update to KDEv3.0.1. Could be gone or be a slumbering bug. =@
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: USM bug reports

Post#139 by brokenman » 13 Aug 2014, 21:14

Thanks Slaxmax. Will do further testing on slackware.

Bogomips, thanks and keep me updated if the error returns.
How do i become super user?
Wear your underpants on the outside and put on a cape.

cttan
Shogun
Shogun
Posts: 332
Joined: 26 Jan 2011, 16:15
Distribution: Porteus 3.2 64bit KDE
Location: Malaysia

Re: USM bug reports

Post#140 by cttan » 15 Aug 2014, 17:31

Hi,

Just found Ekiga 4.0.1 downloaded from USM is missing OpenLDAP deps which is available on USM as well.

Pitivi missing gst-python so unable to start.

beny
Full of knowledge
Full of knowledge
Posts: 723
Joined: 02 Jan 2011, 11:33
Location: italy

Re: USM bug reports

Post#141 by beny » 15 Aug 2014, 17:40

usm -b gst-python
do the job

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: USM bug reports

Post#142 by brokenman » 15 Aug 2014, 18:18

Thank you. Will add to manual dependencies.
How do i become super user?
Wear your underpants on the outside and put on a cape.

router
White ninja
White ninja
Posts: 18
Joined: 02 Aug 2014, 02:22
Distribution: Porteus 3 and pclinuxOS
Location: usa

Re: USM bug reports

Post#143 by router » 15 Aug 2014, 21:57

running usm as installed with 3.01, it has a couple of quirks i've found i thought i might mention.

one, if i am running it from guest account, which means i had to give the root pass, then when it has downloaded the packages and asks me if i want to open the folder, if i click yes, nothing happens, i'm guessing because it's trying to run the file manager as root and, if it runs, it can't connect to my display, or something like that, i don't know, just a guess in the dark.

two, if a search returns too many results, usm is dead in the water then, it can't do any more actions once it hits that error, i have to restart it.

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: USM bug reports

Post#144 by brokenman » 15 Aug 2014, 23:07

Thanks router. What file manager are you using?
How do i become super user?
Wear your underpants on the outside and put on a cape.

cttan
Shogun
Shogun
Posts: 332
Joined: 26 Jan 2011, 16:15
Distribution: Porteus 3.2 64bit KDE
Location: Malaysia

Re: USM bug reports

Post#145 by cttan » 16 Aug 2014, 02:11

Hi,

Strange thing happened today. I have updated usm using usm -u all and the sbo seems like not getting updated.

Code: Select all

# usm -u all
alien was already updated today. Skipping.
salix was already updated today. Skipping.
slacky was already updated today. Skipping.
ponce was already updated today. Skipping.
slackware was already updated today. Skipping.
slackwarepatches was already updated today. Skipping.

Downloading: extra-deps.txt  DONE
I have copied the missing sbo folder from older usm -u all version and able to build gst-python
You will need gst-plugins-base-0.10 and gstreamer-0.10
http://pastebin.com/raw.php?i=PJwVTErd

But Pitivi still refused to start.

Code: Select all

# pitivi
Couldn't set locale !, reverting to C locale
Couldn't set locale !, reverting to C locale

(process:5964): Gtk-WARNING **: Locale not supported by C library.
        Using the fallback 'C' locale.
** Message: pygobject_register_sinkfunc is deprecated (GstObject)
Traceback (most recent call last):
  File "/usr/bin/pitivi", line 134, in <module>
    _run_pitivi()
  File "/usr/bin/pitivi", line 122, in _run_pitivi
    import pitivi.application as ptv
  File "/usr/lib64/pitivi/python/pitivi/application.py", line 44, in <module>
    from pitivi.settings import GlobalSettings
  File "/usr/lib64/pitivi/python/pitivi/settings.py", line 29, in <module>
    import xdg.BaseDirectory as xdg_dirs  # Freedesktop directories spec
ImportError: No module named xdg.BaseDirectory
Activated xdg-user-dirs-0.14-x86_64-1.xzm also yield the same results

router
White ninja
White ninja
Posts: 18
Joined: 02 Aug 2014, 02:22
Distribution: Porteus 3 and pclinuxOS
Location: usa

Re: USM bug reports

Post#146 by router » 16 Aug 2014, 02:19

brokenman wrote:Thanks router. What file manager are you using?

dolphin, in kde

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: USM bug reports

Post#147 by brokenman » 16 Aug 2014, 03:49

Thanks router.

cttan, you can update sbo manually: usm -u sbo

pitivi is going to require at least

python
pygtk
pygobject
pycairo
gst-python
pyxdg (should get you past your last error)
goocanvas
pygoocanvas
gnonlin
zope
and probably more.

Please keep this thread on track cttan and post somewhere else about getting pitivi to run. Thanks.
How do i become super user?
Wear your underpants on the outside and put on a cape.

router
White ninja
White ninja
Posts: 18
Joined: 02 Aug 2014, 02:22
Distribution: Porteus 3 and pclinuxOS
Location: usa

Re: USM bug reports

Post#148 by router » 16 Aug 2014, 04:51

@brokenman

you probably find this before you even see this post but i decided to try usmgui from terminal, and got this one more tiny nugget of info on the issue:

Couldn't exec /tmp/usm/xine-ui-0.99.7: Permission denied

(downloading xine and specified that it should make a subfolder, the above is the folder name)

also don't know if this matters to anything but when i first ran it i got:

widget_comboboxtext_input_by_file(): Couldn't open '/tmp/usm.HxAyFu/sbo-categories.tmp' for reading.

Bogomips
Full of knowledge
Full of knowledge
Posts: 2534
Joined: 25 Jun 2014, 15:21
Distribution: 3.2.2 Cinnamon & KDE5
Location: London

Re: USM bug reports

Post#149 by Bogomips » 16 Aug 2014, 23:39

brokenman wrote:Bogomips, thanks and keep me updated if the error returns.
FATAL ERROR!
  1. Code: Select all

    root@porteus:/home/guest# usm -u all
     Starting alien database update 
    ...
     slackwarepatches  database updated. 
    
    Updating config file
    
    Downloading: extra-deps.txt  DONE
  2. First USM Invocation
  3. Immediately following USM Invocation

    Code: Select all

    root@porteus:/home/guest# usm -v
    
     You are using USM version:  3.1.4
    
    root@porteus:/home/guest# usm -g vlc  | tee u_v 2>> u_v
    
     The following items were found.
     Choose an number to confirm. 
    1) vlc-2.1.2-i486-1sl.txz      4) vlc-2.1.5-i486-1alien.txz
    2) vlc-2.1.2-i686-1dj.txz      5) vlc-qt-0.10.0-i486-1sl.txz
    3) vlc-2.1.4-i486-1alien.txz
    #?  ctrl+c to quit
    
    4
    
    Processing:   vlc-2.1.5-i486-1alien.txz 
    
    Libraries required:  187
    Libraries found in system: 117
    Libraries to resolve: 70
    ...
    
    Processing:   openssl-solibs-1.0.1i-i486-1_slack14.1.txz 
              
    
    ==============================================================================
    WARNING!        WARNING!        WARNING!        WARNING!        WARNING!
    ==============================================================================
    One or more errors occurred while usm was running:                       
     
    FATAL ERROR!
     resolve_deps 382
    Could not find: LIBS.TXT
     
    ============================================================================== 
    
    guest@porteus:~$ diff p10/Por/usm.conf /etc/usm
    CONFIGURATION FILE HAS NOT CHANGED!
    
  4. Second USM Invocation
  5. Code: Select all

    loop0     7:0    0  15.6M  0 loop /mnt/live/memory/images/000-kernel.xzm
    loop1     7:1    0  48.9M  0 loop /mnt/live/memory/images/001-core.xzm
    loop2     7:2    0  45.4M  0 loop /mnt/live/memory/images/002-xorg.xzm
    loop3     7:3    0  64.7M  0 loop /mnt/live/memory/images/003-kde.xzm
    loop4     7:4    0     4K  0 loop /mnt/live/memory/images/0099-settings.xzm
    loop5     7:5    0  29.2M  0 loop /mnt/live/memory/images/nVidia-304.123-porteus-v3.0.1-i486
    loop6     7:6    0    44K  0 loop /mnt/live/memory/images/slackyd-1.0.20110809-i486-4sl.xzm
    loop7     7:7    0   528K  0 loop /mnt/live/memory/images/sudo-1.8.9p5-i486-1.xzm
    loop8     7:8    0    12M  1 loop /mnt/live/memory/images/python-2.7.5-i486-1.xzm
    loop9     7:9    0   836K  1 loop /mnt/live/memory/images/spacefm-0.8.2-i486-1dj.xzm
    loop10    7:10   0  16.7M  1 loop /mnt/live/memory/images/Kate_040814.xzm
    loop11    7:11   0  35.9M  1 loop /mnt/live/memory/images/VLC_040814.xzm
    
P.S. psinfo available if needed.
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: USM bug reports

Post#150 by brokenman » 17 Aug 2014, 02:57

Thanks router will check it out.

Bogomips I couldn't reproduce this just now under 64bit but will try in 32bit tomorrow. I pushed a database update tonight. There were updates in the alien repo.
How do i become super user?
Wear your underpants on the outside and put on a cape.

Post Reply