Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

New features which should be implemented in Porteus; suggestions are welcome. All questions or problems with testing releases (alpha, beta, or rc) should go in their relevant thread here, rather than the Bug Reports section.
User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#91 by brokenman » 02 Mar 2014, 19:35

But I had no sound since alsamixer and every software on porteus select Intel Haswell HDMI:
type this into a terminal and then retry your mplayer audio.

Code: Select all

cat >> /etc/asound.conf << EOF
defaults.pcm.card 1
defaults.ctl.card 1
EOF
If it doesn't work substitute the number 1 for 0. This will change the order of your audio cards. I also have this trouble with haswell.

For the package manager please read this thread:
viewtopic.php?f=81&t=3154&p=22319&hilit ... ger#p22319
After updating you will be able to update the USM by running: usm -u usm

For the xdg-open bug in mate (mentioned somewhere in this bug thread that got off topic) you can symlink xdg-open to gvfs-open which should get you out of trouble for now.

Code: Select all

mv /usr/bin/xdg-open /usr/bin/xdg-open.bak
ln -s /usr/bin/gvfs-open /usr/bin/xdg-open
After this it should work: xdg-open http://www.porteus.org
How do i become super user?
Wear your underpants on the outside and put on a cape.

User avatar
Slaxmax
Contributor
Contributor
Posts: 403
Joined: 03 Jan 2013, 09:51
Distribution: KDE4
Location: Campinas Brazil https://goo.gl/yrxwKi

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#92 by Slaxmax » 03 Mar 2014, 23:35

system hangs in porteus 32 and 64 bit

fail log xorg

Code: Select all

[     5.744] (EE) Failed to load module "nv" (module does not exist, 0)
[     5.812] (EE) Failed to load module "fbdev" (module does not exist, 0)
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
fail log dmesg

Code: Select all

[    0.000000] tsc: Fast TSC calibration failed
[ 0.173645] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
“DNA is like a computer program but far, far more advanced than any software ever created.”
― Bill Gates, The Road Ahead

User avatar
fanthom
Site Admin
Site Admin
Posts: 4566
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland, currently - Cork, IE
Contact:

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#93 by fanthom » 03 Mar 2014, 23:42

@Slaxmax
these errors are ok (harmless). at which stage the booting stops?
please setup changes and when you get a hang reboot to a working system and upload /var/log/messages, /var/log/Xorg.0.log and /var/log/Xorg.1.log (if exist) and link here.

thanks
Please add [Solved] to your thread title if the solution was found.

donald
Full of knowledge
Full of knowledge
Posts: 1161
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#94 by donald » 04 Mar 2014, 11:28

xfce 3.0 rc2 32bit
boot from usb into allways fresh (+ nvidia 173 in base Folder), all settings are default

I inserted a CD (ide/master-drive) which was automounted then.Now I wanted my
CD back.In Thunar I tried eject (rightclick-menu and the little button)..
unmount/eject..and the open/close at the CD-Drive, all with the same result.
the CD-tray opens and closes immediately again, before I can grab the CD..no chance..

No one else noticed this behavior ??

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#95 by brokenman » 04 Mar 2014, 18:37

It's amazing how often this anomaly occurs and then reoccurs. There could be many causes of it and it is hard to trouble shoot since I don't have a desktop computer. Does this only happens in xfce? Can you boot into text mode and type: eject /dev/cdrom

Also try pushing the cd tray button manually to eject it and see if it happens. If it does try to push it again very quickly to see if it stays out. Not very technical I know but it will help to see if the polling/timing of the device is playing a part.
How do i become super user?
Wear your underpants on the outside and put on a cape.

User avatar
Slaxmax
Contributor
Contributor
Posts: 403
Joined: 03 Jan 2013, 09:51
Distribution: KDE4
Location: Campinas Brazil https://goo.gl/yrxwKi

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#96 by Slaxmax » 05 Mar 2014, 01:47

fanthom wrote:@Slaxmax
these errors are ok (harmless). at which stage the booting stops?
please setup changes and when you get a hang reboot to a working system and upload /var/log/messages, /var/log/Xorg.0.log and /var/log/Xorg.1.log (if exist) and link here.

thanks
Ok, there are no other errors or failures beyond what showed in the previous post.
The system hangs and only reset by the button.
No new log written after the failure.

xorg.0.log

Code: Select all

[     5.748] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[     5.749] X Protocol Version 11, Revision 0
[     5.749] Build Operating System: Slackware 14.1 Slackware Linux Project
[     5.749] Current Operating System: Linux porteus 3.12.9-porteus #1 SMP PREEMPT Mon Feb 3 15:09:10 Local time zone must be set--s x86_64
[     5.749] Kernel command line: quiet initrd=initrd.xz fsck changes=/mnt/sda1/porteus BOOT_IMAGE=vmlinuz 
[     5.749] Build Date: 11 January 2014  12:01:12PM
[     5.749]  
[     5.749] Current version of pixman: 0.30.2
[     5.749] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.749] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.749] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar  4 22:58:03 2014
[     5.756] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.761] (==) No Layout section.  Using the first Screen section.
[     5.761] (==) No screen section available. Using defaults.
[     5.761] (**) |-->Screen "Default Screen Section" (0)
[     5.761] (**) |   |-->Monitor "<default monitor>"
[     5.761] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.761] (==) Automatically adding devices
[     5.761] (==) Automatically enabling devices
[     5.761] (==) Automatically adding GPU devices
[     5.763] (WW) The directory "/usr/share/fonts/local" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.763] 	Entry deleted from font path.
[     5.763] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.763] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/CID" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
[     5.763] 	Entry deleted from font path.
[     5.763] (==) FontPath set to:
	
[     5.763] (==) ModulePath set to "/usr/lib64/xorg/modules"
[     5.763] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.763] (II) Loader magic: 0x7f7820
[     5.763] (II) Module ABI versions:
[     5.763] 	X.Org ANSI C Emulation: 0.4
[     5.763] 	X.Org Video Driver: 14.1
[     5.763] 	X.Org XInput driver : 19.1
[     5.763] 	X.Org Server Extension : 7.0
[     5.763] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.764] (--) PCI:*(0:0:13:0) 10de:03d6:1849:03d6 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @ 0x????????/131072
[     5.764] (II) Open ACPI successful (/var/run/acpid.socket)
[     5.764] Initializing built-in extension Generic Event Extension
[     5.764] Initializing built-in extension SHAPE
[     5.764] Initializing built-in extension MIT-SHM
[     5.764] Initializing built-in extension XInputExtension
[     5.764] Initializing built-in extension XTEST
[     5.764] Initializing built-in extension BIG-REQUESTS
[     5.764] Initializing built-in extension SYNC
[     5.764] Initializing built-in extension XKEYBOARD
[     5.764] Initializing built-in extension XC-MISC
[     5.764] Initializing built-in extension XINERAMA
[     5.764] Initializing built-in extension XFIXES
[     5.764] Initializing built-in extension RENDER
[     5.765] Initializing built-in extension RANDR
[     5.765] Initializing built-in extension COMPOSITE
[     5.765] Initializing built-in extension DAMAGE
[     5.765] Initializing built-in extension MIT-SCREEN-SAVER
[     5.765] Initializing built-in extension DOUBLE-BUFFER
[     5.765] Initializing built-in extension RECORD
[     5.765] Initializing built-in extension DPMS
[     5.765] Initializing built-in extension X-Resource
[     5.765] Initializing built-in extension XVideo
[     5.765] Initializing built-in extension XVideo-MotionCompensation
[     5.765] Initializing built-in extension XFree86-VidModeExtension
[     5.765] Initializing built-in extension XFree86-DGA
[     5.765] Initializing built-in extension XFree86-DRI
[     5.765] Initializing built-in extension DRI2
[     5.765] (II) LoadModule: "glx"
[     5.768] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[     5.817] (II) Module glx: vendor="X.Org Foundation"
[     5.817] 	compiled for 1.14.5, module version = 1.0.0
[     5.817] 	ABI class: X.Org Server Extension, version 7.0
[     5.817] (==) AIGLX enabled
[     5.817] Loading extension GLX
[     5.817] (==) Matched nouveau as autoconfigured driver 0
[     5.817] (==) Matched nv as autoconfigured driver 1
[     5.817] (==) Matched nouveau as autoconfigured driver 2
[     5.817] (==) Matched nv as autoconfigured driver 3
[     5.817] (==) Matched vesa as autoconfigured driver 4
[     5.817] (==) Matched modesetting as autoconfigured driver 5
[     5.817] (==) Matched fbdev as autoconfigured driver 6
[     5.817] (==) Assigned the driver to the xf86ConfigLayout
[     5.817] (II) LoadModule: "nouveau"
[     5.818] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[     5.841] (II) Module nouveau: vendor="X.Org Foundation"
[     5.841] 	compiled for 1.14.4, module version = 1.0.10
[     5.841] 	Module class: X.Org Video Driver
[     5.841] 	ABI class: X.Org Video Driver, version 14.1
[     5.841] (II) LoadModule: "nv"
[     5.845] (WW) Warning, couldn't open module nv
[     5.845] (II) UnloadModule: "nv"
[     5.845] (II) Unloading nv
[     5.845] (EE) Failed to load module "nv" (module does not exist, 0)
[     5.845] (II) LoadModule: "vesa"
[     5.846] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[     5.873] (II) Module vesa: vendor="X.Org Foundation"
[     5.873] 	compiled for 1.14.3, module version = 2.3.3
[     5.873] 	Module class: X.Org Video Driver
[     5.873] 	ABI class: X.Org Video Driver, version 14.1
[     5.874] (II) LoadModule: "modesetting"
[     5.874] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[     5.907] (II) Module modesetting: vendor="X.Org Foundation"
[     5.907] 	compiled for 1.14.4, module version = 0.8.1
[     5.907] 	Module class: X.Org Video Driver
[     5.907] 	ABI class: X.Org Video Driver, version 14.1
[     5.907] (II) LoadModule: "fbdev"
[     5.908] (WW) Warning, couldn't open module fbdev
[     5.908] (II) UnloadModule: "fbdev"
[     5.908] (II) Unloading fbdev
[     5.908] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.908] (II) NOUVEAU driver 
[     5.908] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.908] 	RIVA TNT        (NV04)
[     5.908] 	RIVA TNT2       (NV05)
[     5.908] 	GeForce 256     (NV10)
[     5.908] 	GeForce 2       (NV11, NV15)
[     5.908] 	GeForce 4MX     (NV17, NV18)
[     5.908] 	GeForce 3       (NV20)
[     5.908] 	GeForce 4Ti     (NV25, NV28)
[     5.908] 	GeForce FX      (NV3x)
[     5.908] 	GeForce 6       (NV4x)
[     5.908] 	GeForce 7       (G7x)
[     5.908] 	GeForce 8       (G8x)
[     5.908] 	GeForce GTX 200 (NVA0)
[     5.908] 	GeForce GTX 400 (NVC0)
[     5.908] (II) VESA: driver for VESA chipsets: vesa
[     5.908] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.908] (++) using VT number 7

[     5.911] (II) [drm] nouveau interface version: 1.1.1
[     5.911] (WW) Falling back to old probe method for vesa
[     5.911] (WW) Falling back to old probe method for modesetting
[     5.911] (II) Loading sub module "dri2"
[     5.911] (II) LoadModule: "dri2"
[     5.911] (II) Module "dri2" already built-in
[     5.911] (--) NOUVEAU(0): Chipset: "NVIDIA NV4C"
[     5.911] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.911] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[     5.911] (==) NOUVEAU(0): RGB weight 888
[     5.911] (==) NOUVEAU(0): Default visual is TrueColor
[     5.911] (==) NOUVEAU(0): Using HW cursor
[     5.911] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[     5.911] (==) NOUVEAU(0): Page flipping enabled
[     5.911] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[     5.940] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[     5.969] (II) NOUVEAU(0): EDID for output VGA-1
[     5.969] (II) NOUVEAU(0): Manufacturer: GSM  Model: 4433  Serial#: 16843009
[     5.969] (II) NOUVEAU(0): Year: 2007  Week: 1
[     5.969] (II) NOUVEAU(0): EDID Version: 1.3
[     5.969] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[     5.969] (II) NOUVEAU(0): Sync:  Separate  SyncOnGreen
[     5.969] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[     5.969] (II) NOUVEAU(0): Gamma: 2.20
[     5.969] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     5.969] (II) NOUVEAU(0): First detailed timing is preferred mode
[     5.969] (II) NOUVEAU(0): redX: 0.641 redY: 0.342   greenX: 0.292 greenY: 0.611
[     5.969] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
[     5.969] (II) NOUVEAU(0): Supported established timings:
[     5.969] (II) NOUVEAU(0): 720x400@70Hz
[     5.969] (II) NOUVEAU(0): 640x480@60Hz
[     5.969] (II) NOUVEAU(0): 640x480@75Hz
[     5.969] (II) NOUVEAU(0): 800x600@60Hz
[     5.969] (II) NOUVEAU(0): 800x600@75Hz
[     5.969] (II) NOUVEAU(0): 832x624@75Hz
[     5.969] (II) NOUVEAU(0): 1024x768@60Hz
[     5.969] (II) NOUVEAU(0): 1024x768@75Hz
[     5.969] (II) NOUVEAU(0): 1280x1024@75Hz
[     5.969] (II) NOUVEAU(0): 1152x864@75Hz
[     5.969] (II) NOUVEAU(0): Manufacturer's mask: 0
[     5.969] (II) NOUVEAU(0): Supported standard timings:
[     5.969] (II) NOUVEAU(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
[     5.969] (II) NOUVEAU(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[     5.969] (II) NOUVEAU(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[     5.969] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     5.969] (II) NOUVEAU(0): Supported detailed timing:
[     5.969] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[     5.969] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     5.969] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     5.969] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[     5.969] (II) NOUVEAU(0): Monitor name: L1753T
[     5.969] (II) NOUVEAU(0): Monitor name: 
[     5.969] (II) NOUVEAU(0): EDID (in hex):
[     5.969] (II) NOUVEAU(0): 	00ffffffffffff001e6d334401010101
[     5.969] (II) NOUVEAU(0): 	011101036a221b78ea2ee5a4574a9c25
[     5.969] (II) NOUVEAU(0): 	115054a56b80314f454f614f81800101
[     5.969] (II) NOUVEAU(0): 	010101010101302a009851002a403070
[     5.969] (II) NOUVEAU(0): 	1300520e1100001e000000fd00384b1e
[     5.969] (II) NOUVEAU(0): 	530e000a202020202020000000fc004c
[     5.969] (II) NOUVEAU(0): 	31373533540a202020202020000000fc
[     5.969] (II) NOUVEAU(0): 	00200a20202020202020202020200042
[     5.969] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[     5.969] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     5.969] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     5.969] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     5.969] (II) NOUVEAU(0): Output VGA-1 connected
[     5.969] (II) NOUVEAU(0): Using exact sizes for initial modes
[     5.969] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[     5.969] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     5.969] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[     5.969] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     5.969] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[     5.969] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[     5.969] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[     5.969] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[     5.969] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     5.969] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[     5.969] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     5.969] (==) NOUVEAU(0): DPI set to (96, 96)
[     5.969] (II) Loading sub module "fb"
[     5.969] (II) LoadModule: "fb"
[     5.970] (II) Loading /usr/lib64/xorg/modules/libfb.so
[     5.987] (II) Module fb: vendor="X.Org Foundation"
[     5.987] 	compiled for 1.14.5, module version = 1.0.0
[     5.987] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.987] (II) Loading sub module "exa"
[     5.987] (II) LoadModule: "exa"
[     5.988] (II) Loading /usr/lib64/xorg/modules/libexa.so
[     5.988] (II) Module exa: vendor="X.Org Foundation"
[     5.988] 	compiled for 1.14.5, module version = 2.6.0
[     5.988] 	ABI class: X.Org Video Driver, version 14.1
[     5.988] (II) Loading sub module "shadowfb"
[     5.988] (II) LoadModule: "shadowfb"
[     5.989] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[     5.999] (II) Module shadowfb: vendor="X.Org Foundation"
[     5.999] 	compiled for 1.14.5, module version = 1.0.0
[     5.999] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.999] (II) UnloadModule: "vesa"
[     5.999] (II) Unloading vesa
[     6.000] (II) UnloadModule: "modesetting"
[     6.000] (II) Unloading modesetting
[     6.000] (--) Depth 24 pixmap format is 32 bpp
[     6.001] (II) NOUVEAU(0): Opened GPU channel 0
[     6.002] (II) NOUVEAU(0): [DRI2] Setup complete
[     6.003] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[     6.003] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[     6.015] (II) EXA(0): Driver allocated offscreen pixmaps
[     6.015] (II) EXA(0): Driver registered support for the following operations:
[     6.015] (II)         Solid
[     6.015] (II)         Copy
[     6.015] (II)         Composite (RENDER acceleration)
[     6.015] (II)         UploadToScreen
[     6.015] (II)         DownloadFromScreen
[     6.015] (==) NOUVEAU(0): Backing store disabled
[     6.015] (==) NOUVEAU(0): Silken mouse enabled
[     6.015] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[     6.015] (II) NOUVEAU(0): [XvMC] Extension initialized.
[     6.015] (==) NOUVEAU(0): DPMS enabled
[     6.015] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     6.015] (--) RandR disabled
[     6.406] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     6.406] (II) AIGLX: enabled GLX_INTEL_swap_event
[     6.406] (II) AIGLX: enabled GLX_ARB_create_context
[     6.406] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     6.406] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     6.406] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     6.406] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     6.407] (II) AIGLX: Loaded and initialized nouveau
[     6.407] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.411] (II) NOUVEAU(0): NVEnterVT is called.
[     6.445] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[     6.445] resize called 1280 1024
[     6.675] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.675] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.675] (**) Power Button: Applying InputClass "keyboard-all"
[     6.675] (II) LoadModule: "evdev"
[     6.676] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[     6.730] (II) Module evdev: vendor="X.Org Foundation"
[     6.730] 	compiled for 1.14.3, module version = 2.8.2
[     6.730] 	Module class: X.Org XInput Driver
[     6.730] 	ABI class: X.Org XInput driver, version 19.1
[     6.730] (II) Using input driver 'evdev' for 'Power Button'
[     6.730] (**) Power Button: always reports core events
[     6.730] (**) evdev: Power Button: Device: "/dev/input/event1"
[     6.731] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.731] (--) evdev: Power Button: Found keys
[     6.731] (II) evdev: Power Button: Configuring as keyboard
[     6.731] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     6.731] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.731] (**) Option "xkb_rules" "evdev"
[     6.731] (**) Option "xkb_model" "pc104"
[     6.731] (**) Option "xkb_layout" "us"
[     6.731] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.765] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     6.765] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.766] (**) Power Button: Applying InputClass "keyboard-all"
[     6.766] (II) Using input driver 'evdev' for 'Power Button'
[     6.766] (**) Power Button: always reports core events
[     6.766] (**) evdev: Power Button: Device: "/dev/input/event0"
[     6.766] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.766] (--) evdev: Power Button: Found keys
[     6.766] (II) evdev: Power Button: Configuring as keyboard
[     6.766] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[     6.766] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.766] (**) Option "xkb_rules" "evdev"
[     6.766] (**) Option "xkb_model" "pc104"
[     6.766] (**) Option "xkb_layout" "us"
[     6.766] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.767] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event3)
[     6.767] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[     6.767] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[     6.767] (**) USB Optical Mouse: always reports core events
[     6.767] (**) evdev: USB Optical Mouse: Device: "/dev/input/event3"
[     6.767] (--) evdev: USB Optical Mouse: Vendor 0x15ca Product 0xc3
[     6.767] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[     6.767] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[     6.767] (--) evdev: USB Optical Mouse: Found relative axes
[     6.767] (--) evdev: USB Optical Mouse: Found x and y relative axes
[     6.767] (II) evdev: USB Optical Mouse: Configuring as mouse
[     6.768] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[     6.768] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[     6.768] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     6.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3/event3"
[     6.768] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[     6.768] (II) evdev: USB Optical Mouse: initialized for relative axes.
[     6.768] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[     6.768] (**) USB Optical Mouse: (accel) acceleration profile 0
[     6.769] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[     6.769] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[     6.769] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[     6.769] (II) No input driver specified, ignoring this device.
[     6.769] (II) This device may have been added with another device file.
[     6.770] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event6)
[     6.770] (II) No input driver specified, ignoring this device.
[     6.770] (II) This device may have been added with another device file.
[     6.770] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event5)
[     6.771] (II) No input driver specified, ignoring this device.
[     6.771] (II) This device may have been added with another device file.
[     6.771] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event4)
[     6.771] (II) No input driver specified, ignoring this device.
[     6.771] (II) This device may have been added with another device file.
[     6.771] (II) config/udev: Adding drm device (/dev/dri/card0)
[     6.772] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[     6.772] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.772] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[     6.772] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     6.772] (**) AT Translated Set 2 keyboard: always reports core events
[     6.772] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[     6.772] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     6.772] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     6.772] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     6.772] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[     6.772] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[     6.772] (**) Option "xkb_rules" "evdev"
[     6.772] (**) Option "xkb_model" "pc104"
[     6.773] (**) Option "xkb_layout" "us"
[     6.773] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    14.312] (II) NOUVEAU(0): EDID vendor "GSM", prod id 17459
[    14.312] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    14.312] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    14.312] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    14.312] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    14.312] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    14.312] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.352] (II) NOUVEAU(0): EDID vendor "GSM", prod id 17459
[    16.352] (II) NOUVEAU(0): Using hsync ranges from config file
[    16.352] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    16.352] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.352] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    16.352] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    16.352] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    16.381] (II) NOUVEAU(0): EDID vendor "GSM", prod id 17459
[    16.381] (II) NOUVEAU(0): Using hsync ranges from config file
[    16.381] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    16.381] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.381] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    16.381] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    16.381] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    25.987] (II) NOUVEAU(0): EDID vendor "GSM", prod id 17459
[    25.987] (II) NOUVEAU(0): Using hsync ranges from config file
[    25.987] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    25.987] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    25.987] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    25.987] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.987] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
“DNA is like a computer program but far, far more advanced than any software ever created.”
― Bill Gates, The Road Ahead

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#97 by Kriss » 05 Mar 2014, 03:14

brokenman wrote:@All
Please, please feel free to offer fixes as well as suggestions if you get time. It will be a great way to learn a bit about Porteus and will also take some weight off the devs. All maintainers are now stretched for time with real life taking a front seat and meaning less time for porteus. Other distros have many active and contributing members, and we have many members actively contributing too, but I would like to see more in the area of development. For example why doesn't someone take on the task of creating and maintaining a firefox extension module pack for porteus?
The only thing that I'd like to suggest at the moment is to use PAE for 32 bit kernel. As I understand, the only disadvantage is that it won't boot on i486 (but I doubt any recent kernel will boot on i486).
I'm thinking of pros and cons of x86-pae to get the best of both worlds (x86_64 won't boot on older CPUs) and so far didn't find any disadvantages of pae kernel instead of usual 32bit one...

My other suggestions should belong to server version or someone responsible for rc.M script to add check for rc.bond in case of bonding and to add support for nc373i network card, but it's used on servers so I don't think many people will need it.

BTW, thank you for SAS support. I'll probably need it. =)
Suggestions/corrections/additions are always welcome.

User avatar
Slaxmax
Contributor
Contributor
Posts: 403
Joined: 03 Jan 2013, 09:51
Distribution: KDE4
Location: Campinas Brazil https://goo.gl/yrxwKi

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#98 by Slaxmax » 05 Mar 2014, 15:18

The crashes are probably caused by the gpu drivers. I have 2 pc with amd gpu, and another nvidia.
The pc with nvidia gpu hangs ramdomly and the pc with amd gpu rarely crashes. Not a problem of RAM as not accused memtest errors.
The PSU are of good quality, when used windows did not have these problems ..
“DNA is like a computer program but far, far more advanced than any software ever created.”
― Bill Gates, The Road Ahead

donald
Full of knowledge
Full of knowledge
Posts: 1161
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#99 by donald » 05 Mar 2014, 15:59

XFCE 3.0rc2 32bit
regarding the CD-Rom-Drive issue:
what I've done so far is:
disabled "volume management" in thunar
uncheckt every option in settings-> Removeable Drives and Media
boot into text-mode..as root and guest-> eject /dev/cdrom or sr0/sr1 (2 drives)
mount/ umount-> eject..and also the nocd cheatcode (which stopped booting for a little
while at "Triggering udev events")
all done in always-fresh and normal mode
always the same result, The CD-tray goes open-> close (same behavior sr0 / sr1)
and no,pushing, holding, squeezing the open/close Button at the Cd-drives doesn't
make them stay open. :unknown:
---------------------------------------------------------------
btw:
I'm just reporting..if no one else has this issue..never mind..
my Hardware didn't / don't change that fast,so I'm still happy with 2.0 (pre udisks2) :)

User avatar
Slaxmax
Contributor
Contributor
Posts: 403
Joined: 03 Jan 2013, 09:51
Distribution: KDE4
Location: Campinas Brazil https://goo.gl/yrxwKi

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#100 by Slaxmax » 05 Mar 2014, 18:41

donald wrote:xfce 3.0 rc2 32bit
boot from usb into allways fresh (+ nvidia 173 in base Folder), all settings are default

I inserted a CD (ide/master-drive) which was automounted then.Now I wanted my
CD back.In Thunar I tried eject (rightclick-menu and the little button)..
unmount/eject..and the open/close at the CD-Drive, all with the same result.
the CD-tray opens and closes immediately again, before I can grab the CD..no chance..

No one else noticed this behavior ??
same problem here kde4
“DNA is like a computer program but far, far more advanced than any software ever created.”
― Bill Gates, The Road Ahead

User avatar
fanthom
Site Admin
Site Admin
Posts: 4566
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland, currently - Cork, IE
Contact:

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#101 by fanthom » 05 Mar 2014, 20:28

@donald
please install original slackware-14.1 package and check if it fixes the issue (i cant reproduce it but my CD tray never closes even if i run 'eject -t /dev/sr0'):
http://packages.slackware.com/?r=slackw ... 6_64-4.txz
http://packages.slackware.com/?r=slackw ... i486-4.txz

@Slaxmax
Xorg log looks ok - are you sure that booting hangs? cane you hear the kde welcome sound? maybe it's another acpi trouble so please boot with 'acpi=off' cheatcode

@Kriss
a) i did release PAE kernel in the past (one of rc from porteus-1.1 if i remember correctly) and soeme people were complaining as not every CPU supports pae instructions. quoting Wikipedia:
Some desktop Linux distributions such as Fedora Core 6, Ubuntu and openSUSE do not enable the HIGHMEM64 option by default, which is required to gain access to the NX bit in 32-bit mode, in their default kernel; this is because the PAE mode that is required to use the NX bit causes pre-Pentium Pro (including Pentium MMX) and Celeron M and Pentium M processors without NX support to fail to boot. Other processors that do not support PAE are AMD K6 and earlier, Transmeta Crusoe, VIA C3 and earlier, and Geode GX and LX.
add check for rc.bond in case of bonding
which package provides rc.bond script?

add support for nc373i network card, but it's used on servers so I don't think many people will need it.
exactly - we are focusing on desktop and size

thank you for SAS support. I'll probably need it. =)
no prob - SAS controllers are sometimes found in desktop PCs so i have added it :)
Please add [Solved] to your thread title if the solution was found.

donald
Full of knowledge
Full of knowledge
Posts: 1161
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#102 by donald » 05 Mar 2014, 22:30

@fanthom
To be on the safe side I made a fresh installation.no Drivers,nothing extra.
What I can say is that eject / eject -t is working correctly as long as I don't
insert a CD (tray stays open) After inserting a CD the Problem occurs.
The install of the eject-2.1.5-i486-4.txz package does not fix this, but a new
message appeared in CLI:
guest@porteus:~$ eject /dev/sr0
eject: unable to eject, last error: Inappropriate ioctl for device

User avatar
Slaxmax
Contributor
Contributor
Posts: 403
Joined: 03 Jan 2013, 09:51
Distribution: KDE4
Location: Campinas Brazil https://goo.gl/yrxwKi

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#103 by Slaxmax » 06 Mar 2014, 01:34

@fanthom

Kde works "fine", but the system hangs randomly
For example: If run 4 instances glxgears the system hangs .
“DNA is like a computer program but far, far more advanced than any software ever created.”
― Bill Gates, The Road Ahead

Kriss
Samurai
Samurai
Posts: 133
Joined: 06 Jul 2011, 07:07
Location: Russia

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#104 by Kriss » 06 Mar 2014, 02:11

fanthom wrote:@Kriss
a) i did release PAE kernel in the past (one of rc from porteus-1.1 if i remember correctly) and soeme people were complaining as not every CPU supports pae instructions. quoting Wikipedia:
Some desktop Linux distributions such as Fedora Core 6, Ubuntu and openSUSE do not enable the HIGHMEM64 option by default, which is required to gain access to the NX bit in 32-bit mode, in their default kernel; this is because the PAE mode that is required to use the NX bit causes pre-Pentium Pro (including Pentium MMX) and Celeron M and Pentium M processors without NX support to fail to boot. Other processors that do not support PAE are AMD K6 and earlier, Transmeta Crusoe, VIA C3 and earlier, and Geode GX and LX.
Ah... A pity then. =(
I used it back then and wasn't aware of these problems so I didn't understand why it wasn't accepted as the default kernel. Sorry =(
fanthom wrote: add check for rc.bond in case of bonding
which package provides rc.bond script?
I don't know about scripts, I just googled "slackware bonding"
http://www.sgvulcan.com/network-interfa ... sion-13-1/
It's a rare thing for desktop PC to have multiple network cards (which is the case for my maximus IV extreme-z motherboard), and to be honest, I think that this should've been done by someone like Patrick if that's really necessary. But I was baffled by the fact that I had to change rc.M (it was the first time I had to edit it, as far as I remember).
But then again, not many desktop PCs will need it.
fanthom wrote: add support for nc373i network card, but it's used on servers so I don't think many people will need it.
exactly - we are focusing on desktop and size
Agreed. =)
Suggestions/corrections/additions are always welcome.

User avatar
brokenman
Site Admin
Site Admin
Posts: 5456
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v3.2rcX all desktops
Location: Brazil
Contact:

Re: Porteus Desktop Edition 3.0 rc2 bugs/feedback thread

Post#105 by brokenman » 06 Mar 2014, 02:51

Donald it sounds like it is in the core modules if booting to text mode still doesn't work.

Firstly please try a simple permission change on /usr/bin/eject:

Code: Select all

chmod 4755 /usr/bin/eject
Then try to eject as guest.

Secondly please try killing the udev daemon and then try to eject the tray (as root and guest)

Code: Select all

for a in `pgrep -f udevd`; do kill $a ;done
eject -T /dev/cdrom
How do i become super user?
Wear your underpants on the outside and put on a cape.

Post Reply