Feedback for Porteus version 2.0 RC2

New features which should be implemented in Porteus; suggestions are welcome. All questions or problems with testing releases (alpha, beta, or rc) should go in their relevant thread here, rather than the Bug Reports section.
gnomic
White ninja
White ninja
Posts: 16
Joined: 29 Dec 2012, 23:56
Distribution: Linuxmint
Location: Aotearoa

Re: Feedback for Porteus version 2.0 RC2

Post#121 by gnomic » 16 Feb 2013, 09:25

Hi, 3G mania continues :-\/ I ran a live session of the rc2 KDE 64 bit and dropped in usb_modeswitch to /usr/sbin. No joy. Logged out as guest and in as root. Nada. Killed modem-manager and restarted it. Nix. Gave up.

I see there is also usb_modeswitch_dispatcher. Not sure what this does exactly but perhaps also needs to be included?

Now running

Code: Select all

Slax 7.0.5. 3G is go. Linux slax 3.6.11 #1 SMP Fri Dec 21 22:57:14 AKST 2012
Vaguely relevant? https://bugzilla.redhat.com/show_bug.cgi?id=733183

Code: Select all

root@slax:~# ls /usr/sbin | grep usb
update-usbids
update-usbids.sh
usb_modeswitch
usb_modeswitch_dispatcher


usb 2-1: new high-speed USB device number 5 using ehci_hcd
usb 2-1: New USB device found, idVendor=19d2, idProduct=2000
usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
usb 2-1: Product: ZTE WCDMA Technologies MSM
usb 2-1: Manufacturer: ZTE,Incorporated
usb 2-1: SerialNumber: MFxxxx
scsi7 : usb-storage 2-1:1.0
usb 2-1: USB disconnect, device number 5
usb 2-1: new high-speed USB device number 6 using ehci_hcd
usb 2-1: New USB device found, idVendor=19d2, idProduct=0117
usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
usb 2-1: Product: ZTE WCDMA Technologies MSM
usb 2-1: Manufacturer: ZTE,Incorporated
usb 2-1: SerialNumber: MFxxxx
scsi8 : usb-storage 2-1:1.3
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
usbserial: USB Serial Driver core
usbcore: registered new interface driver option
USB Serial support registered for GSM modem (1-port)
option 2-1:1.0: GSM modem (1-port) converter detected
usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
option 2-1:1.1: GSM modem (1-port) converter detected
usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
option 2-1:1.2: GSM modem (1-port) converter detected
usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
scsi 8:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
sd 8:0:0:0: [sdb] Attached SCSI removable disk

User avatar
fanthom
Site Admin
Site Admin
Posts: 4624
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland, currently - Cork, IE
Contact:

Re: Feedback for Porteus version 2.0 RC2

Post#122 by fanthom » 16 Feb 2013, 11:20

@claude
booting with 'copy2ram nohd' cheatcode on a frugal install (on hard drive partition) does not automatically umount the hd partition on which the porteus directories reside as it should,
ok - will check it.
Please note that with the 'nomodeset' cheatcode I get an Xwindows resolution of only 1024x768, which is a much smaller screen than the usual 1400x1050 resolution that is usually automatically configured on this dell inspiron 8200 with Nvidia GEFORCE4GO graphic card.
yes - KMS does not work so resolution is not native.
can you change it manually with GUI tool? if not then you are limited to VESA driver i'm afraid.

@gnomic
Unclear about 'pc-suite', that's a phone setting? Or somewhere in NM?
yes. phone let's me select to work as storage or a modem so even usb_modeswitch is not necessary for it i believe.
I ran a live session of the rc2 KDE 64 bit and dropped in usb_modeswitch to /usr/sbin. No joy.
binary may be not enough.
please try with full usb_modeswitch package converted to xzm as it contains udev rules and modem database.

Cheers
Please add [Solved] to your thread title if the solution was found.

User avatar
Rava
Contributor
Contributor
Posts: 1319
Joined: 11 Jan 2011, 02:46
Distribution: Porteus 3.1.0 x86-64 XFCe
Location: Germany

Re: Feedback for Porteus version 2.0 RC2

Post#123 by Rava » 16 Feb 2013, 11:31

fanthom... who is the one maintaining these details in XFCe Porteus, you or Ahau?

Since you not addressed the below, I quote myself to bump the unanswered stuff:

Gnome-Mplayer and Stereo or Surround per default
Rava wrote:The default, like with 2.0rc2 of XFCe version, is set to surround, aka 5.1 or 6.1 sound. When you watch a surround movie with just stereo sound attached, you only will hear the surround sound,no voices.

When you set it to be stereo only instead, all users with surround will complain that surround is not working out of the box...

In my book... either Porteus is able to check if surround is attached and change the settings at boot time (preferable, but also prone to bugs, and it makes startup a tad bit slower), or keep it at the default settings as: surround.
Then we can add a line to the main read me file that addresses the issue. :)
Alsa equalizer
Rava wrote:Ahau wrote:
Rava, is playing everything in gnome-mplayer a suitable option for you? I might even consider dropping audacious entirely if there is no functionality or convenience added over gnome-mplayer.


Audacious has 1 advantage: an equalizer.

I know that alsa can also have one, but I failed to compile it and get it working with Porteus...

Anyone succeeded here? Sure, a systemwide Alsa equalizer is better than just the build-in audacious one...
Cheers!
Yours Rava

claude
Black ninja
Black ninja
Posts: 80
Joined: 02 Jan 2013, 15:16
Distribution: XFCE 3.1
Location: California

Re: Feedback for Porteus version 2.0 RC2

Post#124 by claude » 16 Feb 2013, 15:17

@fanthom
booting with 'copy2ram nohd' cheatcode on a frugal install (on hard drive partition) does not automatically umount the hd partition on which the porteus directories reside as it should,
ok - will check it.
I meant to specify, not mounted under /mnt/sda*, but under /mnt/live/mnt/sda*.
Please note that with the 'nomodeset' cheatcode I get an Xwindows resolution of only 1024x768, which is a much smaller screen than the usual 1400x1050 resolution that is usually automatically configured on this dell inspiron 8200 with Nvidia GEFORCE4GO graphic card.
yes - KMS does not work so resolution is not native.
can you change it manually with GUI tool? if not then you are limited to VESA driver i'm afraid.
No, it cannot be changed, as the max resolution available is now 1024x768. However, on the the same model inspiron with ATI Radeon 9000 card I get a proper 1400x1050 res. What can I do to get this same proper 1400x1050 res. with the Nvidia GEFORCE4GO card? I tried Porteus v1.1 and it produces the native proper 1400x1050 res. on the inspiron with the Nvidia card...

User avatar
Hamza
Warlord
Warlord
Posts: 1847
Joined: 28 Dec 2010, 07:41
Distribution: Porteus
Location: France

Re: Feedback for Porteus version 2.0 RC2

Post#125 by Hamza » 16 Feb 2013, 15:31

No, it cannot be changed, as the max resolution available is now 1024x768. However, on the the same model inspiron with ATI Radeon 9000 card I get a proper 1400x1050 res.
I'm having the same issue. I'm blocked at 1024x768 screen resolution on Porteus only.

PSINFO:

Code: Select all

----------------------
Output from psinfo
----------------------
script by jayflood
.

====== USER INFO =====
User is: root
.
===== MACHINE INFO =====
Platform: x86_64
Kernel: 3.7.5-porteus
Processor: AMD Athlon(tm) II X2 250 Processor
Base Board Information
	Manufacturer: ASRock
	Product Name: M3A UCC
MemTotal:       12312700 kB
MemFree:         9886808 kB
Bootparam: quiet changes=/mnt/sda2/porteus_save.dat vga_detect
.
===== LIVE DEBUG INFO =====
# Recognized devices:
/dev/sda1: UUID="8008588B085881D8" TYPE="ntfs" 
/dev/sda2: UUID="7C94BE0494BDC146" TYPE="ntfs" 
/mnt/sda2/porteus_save.dat: UUID="5a62b955-541d-42e7-a3d5-d74c051be904" TYPE="ext4" 

# Booting device:
/mnt/sda1

# Porteus data found in:
/mnt/sda1/porteus

# Changes are stored in:
/mnt/sda2/porteus_save.dat

# Non standard /rootcopy dir:
none

# Modules activated during boot time:
/mnt/sda1/porteus/base/000-kernel.xzm
/mnt/sda1/porteus/base/001-core.xzm
/mnt/sda1/porteus/base/002-xorg.xzm
/mnt/sda1/porteus/base/003-lxde.xzm
/mnt/sda1/porteus/base/004-kde.xzm
/mnt/sda1/porteus/base/005-devel.xzm
/mnt/sda1/porteus/base/006-firefox.xzm
/mnt/sda1/porteus/modules/VirtualBox-4.2.6-porteus-v2.0-rc2-x86_64-1ftm.xzm
/mnt/sda1/porteus/modules/binpatch.xzm
/mnt/sda1/porteus/modules/compat32-libraries-2.0-x86_64-1hz.xzm
/mnt/sda1/porteus/modules/filezilla-3.5.3-x86_64-1hz.xzm
/mnt/sda1/porteus/modules/google-chrome-24.0.1312.52-x86_64-1hz.xzm
/mnt/sda1/porteus/modules/htop-1.0.1-x86_64-1hz.xzm
/mnt/sda1/porteus/modules/nVidia-310.32-porteus-v2.0-rc2-x86_64-1ftm.xzm
/mnt/sda1/porteus/modules/opera-12.14.1738-x86_64-1root.xzm
/mnt/sda1/porteus/modules/sublimetext-2-x86_64-1hz.xzm
/mnt/sda1/porteus/modules/vbox-guest-4.2.6-porteus-v2.0-rc2-x86_64-1ftm.xzm
.
===== SOUND INFO =====
Sound card:  0 [SB             ]: HDA-Intel - HDA ATI SB
                      HDA ATI SB at 0xfcff4000 irq 41
 1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xfeb7c000 irq 19
Sound driver: Advanced Linux Sound Architecture Driver Version k3.7.5-porteus.
.
===== PARTITION INFO =====
Mounted: 
devtmpfs       devtmpfs  5.9G  7.0M  5.9G   1% /dev
/dev/sda1      ntfs      232G  157G   76G  68% /mnt/sda1
/dev/sda2      ntfs      234G   83G  152G  36% /mnt/sda2
.
===== OPTICAl DRIVE =====
sr0
.
===== USB INFO =====
Removables: 
Removable status: sd3:0:0:0:[sda]Protect
sd3:0:0:0:[sda]Protect
sd3:0:0:0:[sda]Protect
sd3:0:0:0:[sda]Protect
sd3:0:0:0:[sda]Protect
sd3:0:0:0:[sda]Protect
.
lsusb: Bus 001 Device 003: ID 03f0:8711 Hewlett-Packard Deskjet 2050 J510
Bus 002 Device 002: ID 046e:557f Behavior Tech. Computer Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
.
===== SCREEN INFO =====
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 16384 x 16384
.
===== ACTIVATED MODULES =====
000-kernel.xzm
001-core.xzm
002-xorg.xzm
003-lxde.xzm
004-kde.xzm
005-devel.xzm
006-firefox.xzm
VirtualBox-4.2.6-porteus-v2.0-rc2-x86_64-1ftm.xzm
binpatch.xzm
compat32-libraries-2.0-x86_64-1hz.xzm
filezilla-3.5.3-x86_64-1hz.xzm
google-chrome-24.0.1312.52-x86_64-1hz.xzm
htop-1.0.1-x86_64-1hz.xzm
nVidia-310.32-porteus-v2.0-rc2-x86_64-1ftm.xzm
opera-12.14.1738-x86_64-1root.xzm
sublimetext-2-x86_64-1hz.xzm
vbox-guest-4.2.6-porteus-v2.0-rc2-x86_64-1ftm.xzm
.
===== NETWORK INFO =====
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.99  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::225:22ff:fea1:19a  prefixlen 64  scopeid 0x20<link>
        ether 00:25:22:a1:01:9a  txqueuelen 1000  (Ethernet)
        RX packets 43495  bytes 60676875 (57.8 MiB)
        RX errors 0  dropped 3  overruns 0  frame 0
        TX packets 31179  bytes 4536308 (4.3 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 13  bytes 980 (980.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 13  bytes 980 (980.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
        inet 10.14.0.6  netmask 255.255.255.255  destination 10.14.0.5
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 100  (UNSPEC)
        RX packets 19291  bytes 25421807 (24.2 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 12155  bytes 1084843 (1.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
.
# Generated by NetworkManager
nameserver 8.8.8.8
nameserver 8.8.4.4
nameserver 4.2.2.4
# NOTE: the libc resolver may not support more than 3 nameservers.
# The nameservers listed below may not be recognized.
nameserver 4.2.2.6
nameserver 4.2.2.1
nameserver 4.2.2.2
.
===== PCI INFO =====
lspci: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 (RS480/RS482/RX480/RX482) Chipset - Host bridge [1002:5951] (rev 01)
	Subsystem: ASRock Incorporation Device [1849:5951]
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS480 PCI-X Root Port [1002:5a34]
	Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge [1002:5a37]
	Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA [1002:4380]
	Subsystem: ASRock Incorporation Device [1849:4380]
	Kernel driver in use: ahci
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) [1002:4387]
	Subsystem: ASRock Incorporation Device [1849:4387]
	Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) [1002:4388]
	Subsystem: ASRock Incorporation Device [1849:4388]
	Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) [1002:4389]
	Subsystem: ASRock Incorporation Device [1849:4389]
	Kernel driver in use: ohci_hcd
00:13.3 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) [1002:438a]
	Subsystem: ASRock Incorporation Device [1849:438a]
	Kernel driver in use: ohci_hcd
00:13.4 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) [1002:438b]
	Subsystem: ASRock Incorporation Device [1849:438b]
	Kernel driver in use: ohci_hcd
00:13.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) [1002:4386]
	Subsystem: ASRock Incorporation Device [1849:4386]
	Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 13)
	Subsystem: ASRock Incorporation Device [1849:4385]
	Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB600 IDE [1002:438c]
	Subsystem: ASRock Incorporation Device [1849:438c]
	Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383]
	Subsystem: ASRock Incorporation Device [1849:0397]
	Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge [1002:438d]
	Subsystem: ASRock Incorporation Device [1849:438d]
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
	Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
01:00.0 VGA compatible controller [0300]: nVidia Corporation GF108 [GeForce GT 430] [10de:0de1] (rev a1)
	Kernel driver in use: nvidia
01:00.1 Audio device [0403]: nVidia Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1)
	Kernel driver in use: snd_hda_intel
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
	Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
	Kernel driver in use: r8169
.
.
===== LOGS INFO =====
dmesg | tail 
.
[   15.399638] Bluetooth: BNEP filters: protocol multicast
[   15.399645] Bluetooth: BNEP socket layer initialized
[   15.922726] NET: Registered protocol family 10
[   16.938399] NVRM: GPU at 0000:01:00: GPU-05f3d5d3-c876-f820-7358-69c669632279
[   23.522241] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[   23.523199] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[   23.523204] ata4.00: configured for UDMA/133
[   23.523208] ata4: EH complete
[  422.956767] tun: Universal TUN/TAP device driver, 1.6
[  422.956771] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
.
.
cat /var/log/messages | tail
.
Feb 16 16:43:24 porteus nm-openvpn[2763]: Initialization Sequence Completed
Feb 16 16:43:25 porteus NetworkManager[1928]: <info> VPN connection 'bypass' (IP Config Get) complete.
Feb 16 16:43:25 porteus NetworkManager[1928]: <info> Policy set 'bypass' (tun0) as default for IPv4 routing and DNS.
Feb 16 16:43:25 porteus NetworkManager[1928]: <info> VPN plugin state changed: started (4)
Feb 16 16:43:25 porteus dbus[1438]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Feb 16 16:43:25 porteus dbus[1438]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Feb 16 16:45:52 porteus logger: ACPI action mute is not defined
Feb 16 16:46:43 porteus logger: ACPI action mute is not defined
Feb 16 16:46:46 porteus logger: ACPI action volumedown is not defined
Feb 16 16:46:46 porteus logger: ACPI action volumedown is not defined
..
X.org log:

Code: Select all

[    15.580] 
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    15.580] X Protocol Version 11, Revision 0
[    15.580] Build Operating System: Slackware 14.0 Slackware Linux Project
[    15.580] Current Operating System: Linux porteus 3.7.5-porteus #1 SMP PREEMPT Mon Jan 28 10:58:19 UTC 2013 x86_64
[    15.580] Kernel command line: quiet changes=/mnt/sda2/porteus_save.dat vga_detect
[    15.580] Build Date: 23 August 2012  02:03:27PM
[    15.580]  
[    15.580] Current version of pixman: 0.26.2
[    15.580] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.580] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.580] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 16 16:36:26 2013
[    15.593] (==) Using config file: "/etc/X11/xorg.conf"
[    15.593] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.601] (==) ServerLayout "X.org Configured"
[    15.601] (**) |-->Screen "Screen0" (0)
[    15.601] (**) |   |-->Monitor "Monitor0"
[    15.601] (**) |   |-->Device "Card0"
[    15.601] (**) |-->Input Device "Mouse0"
[    15.601] (**) |-->Input Device "Keyboard0"
[    15.601] (==) Automatically adding devices
[    15.601] (==) Automatically enabling devices
[    15.602] (WW) The directory "/usr/share/fonts/local" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    15.602] 	Entry deleted from font path.
[    15.602] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    15.602] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/CID" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
[    15.602] 	Entry deleted from font path.
[    15.602] (==) FontPath set to:
	
[    15.602] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    15.602] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.602] (WW) Disabling Mouse0
[    15.602] (WW) Disabling Keyboard0
[    15.602] (II) Loader magic: 0x7c48e0
[    15.602] (II) Module ABI versions:
[    15.602] 	X.Org ANSI C Emulation: 0.4
[    15.602] 	X.Org Video Driver: 12.0
[    15.602] 	X.Org XInput driver : 16.0
[    15.602] 	X.Org Server Extension : 6.0
[    15.603] (--) PCI:*(0:1:0:0) 10de:0de1:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000d800/128, BIOS @ 0x????????/524288
[    15.603] (II) Open ACPI successful (/var/run/acpid.socket)
[    15.603] (II) LoadModule: "extmod"
[    15.605] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    15.645] (II) Module extmod: vendor="X.Org Foundation"
[    15.645] 	compiled for 1.12.3, module version = 1.0.0
[    15.645] 	Module class: X.Org Server Extension
[    15.645] 	ABI class: X.Org Server Extension, version 6.0
[    15.645] (II) Loading extension MIT-SCREEN-SAVER
[    15.645] (II) Loading extension XFree86-VidModeExtension
[    15.645] (II) Loading extension XFree86-DGA
[    15.645] (II) Loading extension DPMS
[    15.645] (II) Loading extension XVideo
[    15.645] (II) Loading extension XVideo-MotionCompensation
[    15.645] (II) Loading extension X-Resource
[    15.645] (II) LoadModule: "dbe"
[    15.645] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    15.645] (II) Module dbe: vendor="X.Org Foundation"
[    15.645] 	compiled for 1.12.3, module version = 1.0.0
[    15.645] 	Module class: X.Org Server Extension
[    15.645] 	ABI class: X.Org Server Extension, version 6.0
[    15.645] (II) Loading extension DOUBLE-BUFFER
[    15.645] (II) LoadModule: "glx"
[    15.646] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    16.282] (II) Module glx: vendor="NVIDIA Corporation"
[    16.282] 	compiled for 4.0.2, module version = 1.0.0
[    16.282] 	Module class: X.Org Server Extension
[    16.282] (II) NVIDIA GLX Module  310.32  Mon Jan 14 15:02:04 PST 2013
[    16.282] (II) Loading extension GLX
[    16.282] (II) LoadModule: "record"
[    16.283] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    16.295] (II) Module record: vendor="X.Org Foundation"
[    16.295] 	compiled for 1.12.3, module version = 1.13.0
[    16.295] 	Module class: X.Org Server Extension
[    16.295] 	ABI class: X.Org Server Extension, version 6.0
[    16.295] (II) Loading extension RECORD
[    16.295] (II) LoadModule: "dri"
[    16.296] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    16.313] (II) Module dri: vendor="X.Org Foundation"
[    16.313] 	compiled for 1.12.3, module version = 1.0.0
[    16.313] 	ABI class: X.Org Server Extension, version 6.0
[    16.313] (II) Loading extension XFree86-DRI
[    16.313] (II) LoadModule: "dri2"
[    16.314] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    16.314] (II) Module dri2: vendor="X.Org Foundation"
[    16.314] 	compiled for 1.12.3, module version = 1.2.0
[    16.314] 	ABI class: X.Org Server Extension, version 6.0
[    16.314] (II) Loading extension DRI2
[    16.314] (II) LoadModule: "nvidia"
[    16.314] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    16.421] (II) Module nvidia: vendor="NVIDIA Corporation"
[    16.421] 	compiled for 4.0.2, module version = 1.0.0
[    16.421] 	Module class: X.Org Video Driver
[    16.452] (II) NVIDIA dlloader X Driver  310.32  Mon Jan 14 14:42:46 PST 2013
[    16.452] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    16.452] (++) using VT number 7

[    16.464] (II) Loading sub module "wfb"
[    16.464] (II) LoadModule: "wfb"
[    16.465] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    16.474] (II) Module wfb: vendor="X.Org Foundation"
[    16.474] 	compiled for 1.12.3, module version = 1.0.0
[    16.474] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.474] (II) Loading sub module "ramdac"
[    16.474] (II) LoadModule: "ramdac"
[    16.474] (II) Module "ramdac" already built-in
[    16.484] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    16.484] (==) NVIDIA(0): RGB weight 888
[    16.484] (==) NVIDIA(0): Default visual is TrueColor
[    16.484] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    16.484] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[    16.484] (**) NVIDIA(0): Option "DPI" "96 x 96"
[    16.484] (**) NVIDIA(0): Enabling 2D acceleration
[    16.936] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[    16.937] (II) NVIDIA(0): NVIDIA GPU GeForce GT 430 (GF108) at PCI:1:0:0 (GPU-0)
[    16.937] (--) NVIDIA(0): Memory: 1048576 kBytes
[    16.937] (--) NVIDIA(0): VideoBIOS: 70.08.29.00.30
[    16.937] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    16.938] (--) NVIDIA(0): Valid display device(s) on GeForce GT 430 at PCI:1:0:0
[    16.939] (--) NVIDIA(0):     CRT-0
[    16.939] (--) NVIDIA(0):     CRT-1 (connected)
[    16.939] (--) NVIDIA(0):     DFP-0
[    16.939] (--) NVIDIA(0):     DFP-1
[    16.939] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    16.939] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    16.939] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    16.939] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    16.939] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    16.939] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    16.939] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.939] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[    16.939] (**) NVIDIA(0):     all display devices.)
[    16.940] (==) NVIDIA(0): 
[    16.940] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    16.940] (==) NVIDIA(0):     will be used as the requested mode.
[    16.940] (==) NVIDIA(0): 
[    16.941] (II) NVIDIA(0): Validated MetaModes:
[    16.941] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[    16.941] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    16.964] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[    16.964] (--) Depth 24 pixmap format is 32 bpp
[    16.964] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    16.964] (II) NVIDIA:     access.
[    16.968] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[    17.002] (II) Loading extension NV-GLX
[    17.072] (==) NVIDIA(0): Disabling shared memory pixmaps
[    17.072] (==) NVIDIA(0): Backing store disabled
[    17.072] (==) NVIDIA(0): Silken mouse enabled
[    17.072] (==) NVIDIA(0): DPMS enabled
[    17.072] (II) Loading extension NV-CONTROL
[    17.073] (II) Loading extension XINERAMA
[    17.073] (II) Loading sub module "dri2"
[    17.073] (II) LoadModule: "dri2"
[    17.073] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    17.073] (II) Module dri2: vendor="X.Org Foundation"
[    17.073] 	compiled for 1.12.3, module version = 1.2.0
[    17.073] 	ABI class: X.Org Server Extension, version 6.0
[    17.073] (II) NVIDIA(0): [DRI2] Setup complete
[    17.073] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    17.073] (--) RandR disabled
[    17.073] (II) Initializing built-in extension Generic Event Extension
[    17.073] (II) Initializing built-in extension SHAPE
[    17.073] (II) Initializing built-in extension MIT-SHM
[    17.073] (II) Initializing built-in extension XInputExtension
[    17.073] (II) Initializing built-in extension XTEST
[    17.073] (II) Initializing built-in extension BIG-REQUESTS
[    17.073] (II) Initializing built-in extension SYNC
[    17.073] (II) Initializing built-in extension XKEYBOARD
[    17.073] (II) Initializing built-in extension XC-MISC
[    17.073] (II) Initializing built-in extension XINERAMA
[    17.073] (II) Initializing built-in extension XFIXES
[    17.073] (II) Initializing built-in extension RENDER
[    17.073] (II) Initializing built-in extension RANDR
[    17.073] (II) Initializing built-in extension COMPOSITE
[    17.073] (II) Initializing built-in extension DAMAGE
[    17.075] (II) Initializing extension GLX
[    17.265] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    17.265] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.265] (**) Power Button: Applying InputClass "keyboard-all"
[    17.265] (II) LoadModule: "evdev"
[    17.266] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    17.284] (II) Module evdev: vendor="X.Org Foundation"
[    17.284] 	compiled for 1.12.3, module version = 2.7.3
[    17.284] 	Module class: X.Org XInput Driver
[    17.284] 	ABI class: X.Org XInput driver, version 16.0
[    17.284] (II) Using input driver 'evdev' for 'Power Button'
[    17.284] (**) Power Button: always reports core events
[    17.284] (**) evdev: Power Button: Device: "/dev/input/event3"
[    17.284] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.284] (--) evdev: Power Button: Found keys
[    17.284] (II) evdev: Power Button: Configuring as keyboard
[    17.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    17.284] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.284] (**) Option "xkb_rules" "evdev"
[    17.284] (**) Option "xkb_model" "evdev"
[    17.284] (**) Option "xkb_layout" "us"
[    17.284] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    17.311] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    17.311] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.311] (**) Power Button: Applying InputClass "keyboard-all"
[    17.311] (II) Using input driver 'evdev' for 'Power Button'
[    17.311] (**) Power Button: always reports core events
[    17.311] (**) evdev: Power Button: Device: "/dev/input/event2"
[    17.311] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.311] (--) evdev: Power Button: Found keys
[    17.311] (II) evdev: Power Button: Configuring as keyboard
[    17.311] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    17.311] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    17.311] (**) Option "xkb_rules" "evdev"
[    17.311] (**) Option "xkb_model" "evdev"
[    17.311] (**) Option "xkb_layout" "us"
[    17.311] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    17.311] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[    17.311] (II) No input driver specified, ignoring this device.
[    17.311] (II) This device may have been added with another device file.
[    17.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event7)
[    17.312] (II) No input driver specified, ignoring this device.
[    17.312] (II) This device may have been added with another device file.
[    17.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[    17.312] (II) No input driver specified, ignoring this device.
[    17.312] (II) This device may have been added with another device file.
[    17.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[    17.312] (II) No input driver specified, ignoring this device.
[    17.312] (II) This device may have been added with another device file.
[    17.312] (II) config/udev: Adding input device BTC USB Multimedia Cordless Kit (/dev/input/event0)
[    17.312] (**) BTC USB Multimedia Cordless Kit: Applying InputClass "evdev keyboard catchall"
[    17.312] (**) BTC USB Multimedia Cordless Kit: Applying InputClass "keyboard-all"
[    17.312] (II) Using input driver 'evdev' for 'BTC USB Multimedia Cordless Kit'
[    17.312] (**) BTC USB Multimedia Cordless Kit: always reports core events
[    17.312] (**) evdev: BTC USB Multimedia Cordless Kit: Device: "/dev/input/event0"
[    17.312] (--) evdev: BTC USB Multimedia Cordless Kit: Vendor 0x46e Product 0x557f
[    17.312] (--) evdev: BTC USB Multimedia Cordless Kit: Found keys
[    17.312] (II) evdev: BTC USB Multimedia Cordless Kit: Configuring as keyboard
[    17.312] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    17.312] (II) XINPUT: Adding extended input device "BTC USB Multimedia Cordless Kit" (type: KEYBOARD, id 8)
[    17.312] (**) Option "xkb_rules" "evdev"
[    17.312] (**) Option "xkb_model" "evdev"
[    17.312] (**) Option "xkb_layout" "us"
[    17.312] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    17.313] (II) config/udev: Adding input device BTC USB Multimedia Cordless Kit (/dev/input/event1)
[    17.313] (**) BTC USB Multimedia Cordless Kit: Applying InputClass "evdev pointer catchall"
[    17.313] (**) BTC USB Multimedia Cordless Kit: Applying InputClass "evdev keyboard catchall"
[    17.313] (**) BTC USB Multimedia Cordless Kit: Applying InputClass "keyboard-all"
[    17.313] (II) Using input driver 'evdev' for 'BTC USB Multimedia Cordless Kit'
[    17.313] (**) BTC USB Multimedia Cordless Kit: always reports core events
[    17.313] (**) evdev: BTC USB Multimedia Cordless Kit: Device: "/dev/input/event1"
[    17.313] (--) evdev: BTC USB Multimedia Cordless Kit: Vendor 0x46e Product 0x557f
[    17.313] (--) evdev: BTC USB Multimedia Cordless Kit: Found 3 mouse buttons
[    17.313] (--) evdev: BTC USB Multimedia Cordless Kit: Found scroll wheel(s)
[    17.313] (--) evdev: BTC USB Multimedia Cordless Kit: Found relative axes
[    17.313] (--) evdev: BTC USB Multimedia Cordless Kit: Found x and y relative axes
[    17.313] (--) evdev: BTC USB Multimedia Cordless Kit: Found absolute axes
[    17.313] (II) evdev: BTC USB Multimedia Cordless Kit: Forcing absolute x/y axes to exist.
[    17.313] (--) evdev: BTC USB Multimedia Cordless Kit: Found keys
[    17.313] (II) evdev: BTC USB Multimedia Cordless Kit: Configuring as mouse
[    17.313] (II) evdev: BTC USB Multimedia Cordless Kit: Configuring as keyboard
[    17.313] (II) evdev: BTC USB Multimedia Cordless Kit: Adding scrollwheel support
[    17.313] (**) evdev: BTC USB Multimedia Cordless Kit: YAxisMapping: buttons 4 and 5
[    17.313] (**) evdev: BTC USB Multimedia Cordless Kit: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.313] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input1/event1"
[    17.313] (II) XINPUT: Adding extended input device "BTC USB Multimedia Cordless Kit" (type: KEYBOARD, id 9)
[    17.313] (**) Option "xkb_rules" "evdev"
[    17.313] (**) Option "xkb_model" "evdev"
[    17.313] (**) Option "xkb_layout" "us"
[    17.313] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    17.313] (II) evdev: BTC USB Multimedia Cordless Kit: initialized for relative axes.
[    17.313] (WW) evdev: BTC USB Multimedia Cordless Kit: ignoring absolute axes.
[    17.313] (**) BTC USB Multimedia Cordless Kit: (accel) keeping acceleration scheme 1
[    17.313] (**) BTC USB Multimedia Cordless Kit: (accel) acceleration profile 0
[    17.313] (**) BTC USB Multimedia Cordless Kit: (accel) acceleration factor: 2.000
[    17.313] (**) BTC USB Multimedia Cordless Kit: (accel) acceleration threshold: 4
[    17.314] (II) config/udev: Adding input device BTC USB Multimedia Cordless Kit (/dev/input/mouse0)
[    17.314] (II) No input driver specified, ignoring this device.
[    17.314] (II) This device may have been added with another device file.
[    17.314] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[    17.314] (II) No input driver specified, ignoring this device.
[    17.314] (II) This device may have been added with another device file.
[    17.314] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[    17.314] (II) No input driver specified, ignoring this device.
[    17.314] (II) This device may have been added with another device file.
[    17.314] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event6)
[    17.314] (II) No input driver specified, ignoring this device.
[    17.314] (II) This device may have been added with another device file.
[    35.390] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[    35.390] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    35.390] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[    35.390] (**) NVIDIA(0):     all display devices.)
[   771.305] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[   771.305] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   771.305] (**) NVIDIA(0):     device CRT-1 (Using EDID frequencies has been enabled on
[   771.305] (**) NVIDIA(0):     all display devices.)
Also, why when I click on window reduce button, the current playing file is switched to 'paused' mode until I display the SMPlayer window as current focus window?
NjVFQzY2Rg==

gnomic
White ninja
White ninja
Posts: 16
Joined: 29 Dec 2012, 23:56
Distribution: Linuxmint
Location: Aotearoa

Re: Feedback for Porteus version 2.0 RC2

Post#126 by gnomic » 17 Feb 2013, 00:14

3G modem continued

"binary may be not enough.
please try with full usb_modeswitch package converted to xzm as it contains udev rules and modem database."

Sorry, any idea where I could find such a thing? Not sure I am clever enough to work it out, especially since this is nearly release time. I need to check Slackware repository?

User avatar
fanthom
Site Admin
Site Admin
Posts: 4624
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland, currently - Cork, IE
Contact:

Re: Feedback for Porteus version 2.0 RC2

Post#127 by fanthom » 17 Feb 2013, 08:50

@claude
nohd + copy2ram is fixed now.
i also fixed the issue where removable media had 2+ partitions and only booting one was unmounted (probably att's case)

regarding Geforce4Go card - you could try official nVidia driver from legacy branch:
http://www.nvidia.com/object/linux-disp ... river.html
but it will be hard to find a patch for kernel-3.7.x.
best chance is in Debian repo.

or you could go with old and unaccelerated 'nv' driver:
http://ftp.heanet.ie/mirrors/ftp.slackw ... i486-1.txz

make sure that you blacklist nouveau with this package:
http://ftp.heanet.ie/mirrors/ftp.slackw ... arch-1.txz
(or just create a file in /etc/modprobe.d/ which blacklist nouveau driver)

@Hamza
as spoken on Gmail (posting here for others) your issue is here:

Code: Select all

[    35.390] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
and google has many threads marked as SOLVED but seems that one has to create xorg.conf manually.
affected users should search for:

Code: Select all

 NVIDIA Unable to read EDID 
to find possible solution.

btw: when i bought my new 24 inch LCD i also had troubles with getting native 1920x1080 resolution on VGA cable (my GPU had only DVI socket and i had to use DVI->VGA converter). all the problems were solved when i got a DVI cable. hardware could also be a problem in some cases.

@gnomic
please get full usb_modeswitch package from slackware repo:
http://ftp.heanet.ie/mirrors/ftp.slackw ... 6_64-2.txz

Cheers
Please add [Solved] to your thread title if the solution was found.

User avatar
Rava
Contributor
Contributor
Posts: 1319
Joined: 11 Jan 2011, 02:46
Distribution: Porteus 3.1.0 x86-64 XFCe
Location: Germany

Re: Feedback for Porteus version 2.0 RC2

Post#128 by Rava » 17 Feb 2013, 18:03

On my Toshiba Satellite Laptop the sound via HDMI is not working: (XFCe version... me thinks this is still the right thread, yes?)

Code: Select all

----------------------
Output from psinfo
----------------------
script by jayflood
.

====== USER INFO =====
User is: root
.
===== MACHINE INFO =====
Platform: x86_64
Kernel: 3.7.5-porteus
Processor: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
Base Board Information
	Manufacturer: TOSHIBA
	Product Name: NWQAA
--
	Asset Tag: Base Board Asset Tag
	Features:
		Board is a hosting board
MemTotal:        3984404 kB
MemFree:         2856328 kB
Bootparam: quiet initrd=initrd.xz xfce BOOT_IMAGE=vmlinuz 
.
===== LIVE DEBUG INFO =====
# Recognized devices:
/dev/sda1: LABEL="System" UUID="28022B4E022B2074" TYPE="ntfs" 
/dev/sda2: LABEL="intHDD2" UUID="B88C51418C50FAF8" TYPE="ntfs" 
/dev/sda4: LABEL="HDDRECOVERY" UUID="400C76C60C76B68E" TYPE="ntfs" 
/dev/sda5: UUID="e4272d58-1032-471e-9cf1-c3fb9cc84670" TYPE="ext3" 
/dev/sdb1: LABEL="extUSB03" UUID="0f7f7ee9-f4f3-425b-a92d-f9b1c6d92ba3" TYPE="ext2" 

# Booting device:
/mnt/sdb1

# Porteus data found in:
/mnt/sdb1/porteus

# Changes are stored in:dhcpcd -x;sleep 1;dhcpcd

memory

# Non standard /rootcopy dir:
none

# Modules activated during boot time:
/mnt/sdb1/porteus/base/000-kernel.xzm
/mnt/sdb1/porteus/base/001-core.xzm
/mnt/sdb1/porteus/base/002-xorg.xzm
/mnt/sdb1/porteus/base/006-firefox.xzm
/mnt/sdb1/porteus/base/0090-xfce.xzm
/mnt/sdb1/porteus/base/0091-xfce-apps.xzm
/mnt/sdb1/porteus/base/010-nVidia-310.32-v2.0-rc2-x86_64.xzm
.
===== SOUND INFO =====
Sound card:  0 [MID            ]: HDA-Intel - HDA Intel MID
                      HDA Intel MID at 0xd8400000 irq 47
 1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xd3000000 irq 16
Sound driver: Advanced Linux Sound Architecture Driver Version k3.7.5-porteus.
.
===== PARTITION INFO =====
Mounted: 
devtmpfs       devtmpfs  1.9G     0  1.9G   0% /dev
/dev/sda1      ntfs      1.5G  693M  808M  47% /mnt/sda1
/dev/sda2      ntfs      256G  183G   73G  72% /mnt/sda2
/dev/sda4      ntfs      9.2G  8.7G  611M  94% /mnt/sda4
/dev/sda5      ext3       22G   15G  6.1G  71% /mnt/sda5
/dev/sdb1      ext2      3.8G  2.7G  910M  76% /mnt/sdb1
/dev/sdc       vfat      7.6G  6.8G  781M  90% /run/media/guest/USB_FD07
.
===== OPTICAl DRIVE =====
sr0
.
===== USB INFO =====
Removables: DataTraveler
USB
Removable status: sd1:0:0:0:[sda]Protect
sd6:0:0:0:[sdb]Protect
sd7:0:0:0:[sdc]Protect
sd8:0:0:0:[sdc]Protect
.
lsusb: Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0951:1603 Kingston Technology DataTraveler 1GB/2GB Pen Drive
Bus 002 Device 004: ID 046a:0100 Cherry GmbH 
Bus 002 Device 006: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive
.
===== SCREEN INFO =====
Screen 0: minimum 8 x 8, current 3286 x 1080, maximum 8192 x 8192
.
===== ACTIVATED MODULES =====
000-kernel.xzm
001-core.xzm
002-xorg.xzm
006-firefox.xzm
0090-xfce.xzm
0091-xfce-apps.xzm
010-nVidia-310.32-v2.0-rc2-x86_64.xzm
.
===== NETWORK INFO =====
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 70:5a:b6:c1:eb:ac  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet6 fe80::b682:feff:fee5:ae9d  prefixlen 64  scopeid 0x20<link>
        ether b4:82:fe:e5:ae:9d  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 17  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 56  bytes 3840 (3.7 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 56  bytes 3840 (3.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
.
# Generated by dhcpcd
# /etc/resolv.conf.head can replace this line
# /etc/resolv.conf.tail can replace this line
.
===== PCI INFO =====
lspci: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d132] (rev 11)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11)
	Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
	Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05)
	Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05)
	Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05)
	Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
01:00.0 VGA compatible controller [0300]: nVidia Corporation GT216 [GeForce GT 330M] [10de:0a29] (rev a2)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: nvidia
01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be2] (rev a1)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: r8169
07:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
	Subsystem: Askey Computer Corp. Device [144f:7175]
	Kernel driver in use: wl
16:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] (rev 20)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: sdhci-pci
16:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] (rev 20)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
16:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] (rev 20)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
	Kernel driver in use: jmb38x_ms
16:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2384] (rev 20)
	Subsystem: Toshiba America Info Systems Device [1179:fd30]
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c52] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)
	Subsystem: Intel Corporation Device [8086:8086]
.
.
===== LOGS INFO =====
dmesg | tail 
.
[ 1707.107254] sd 8:0:0:0: [sdc] Write Protect is off
[ 1707.107258] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 1707.107898] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 1707.107909] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1707.111804] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 1707.111813] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1707.213502]  sdc:
[ 1707.428439] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 1707.428451] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1707.428458] sd 8:0:0:0: [sdc] Attached SCSI removable disk
.
.
cat /var/log/messages | tail
.
Feb 17 19:16:49 porteus dhcpcd[5302]: eth1: carrier acquired
Feb 17 19:16:49 porteus NetworkManager[2372]: <info> (eth1): preparing device.
Feb 17 19:16:49 porteus NetworkManager[2372]: <info> (eth1): deactivating device (reason 'managed') [2]
Feb 17 19:16:49 porteus NetworkManager[2372]: <info> (eth1) supports 1 scan SSIDs
Feb 17 19:16:49 porteus NetworkManager[2372]: <info> (eth1): supplicant interface state: starting -> ready
Feb 17 19:16:49 porteus NetworkManager[2372]: <info> (eth1): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Feb 17 19:16:49 porteus NetworkManager[2372]: <info> (eth1): supplicant interface state: ready -> inactive
Feb 17 19:16:49 porteus NetworkManager[2372]: <info> (eth1) supports 1 scan SSIDs
Feb 17 19:16:49 porteus dhcpcd[5302]: eth1: carrier lost
Feb 17 19:16:49 porteus dhcpcd[5302]: eth1: waiting for carrier
..
As you can see, there are two sound cards: 0 being HDA-Intel - HDA Intel MID and 1 being HDA-Intel - HDA NVidia.

aplay only calls #1 "Nvidia" and #0 "Intel":

Code: Select all

root@porteus:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: ALC269VB Analog [ALC269VB Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
With Porteus 1.2 I had to switch on the HDMI sound devices via the different Sound Mixer / Volume Control of XFCe. But the new one opens a terminal with alsamixer now.

When I select the NVidia Card via F6, I get the 4 HDMI devices, listed as "S/PDIF" "S/PDIF 1" "S/PDIF 2" and "S/PDIF 3"

All are switched off, and I cannot access the help menu of alsamixer, cause instead the XFCe or Porteus windows pops up asking me if I want to open the XFCe help file. Which I sure not want, I want to open the terminal program, here = alsamixer help...

So... how do I switch on the HDMI device? usually with 1.2 it was 1:9, so

Code: Select all

mplayer -ao alsa:device=hw=1.9 soundfile
would just work fine, but for now, I have no sound at all.

I want it via the Full HD TV screen / via HDMI, and like I said, it used to run with the above, or with this asound.conf:

Code: Select all

 pcm.!default {
      type plug
      slave.pcm {
              type hw
              card 1
              device 9
      }
 }
But dum dum me could not figure out how to switch on the HDMI device. How can that be done that it is switched on every time I boot Porteus?
Cheers!
Yours Rava

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Feedback for Porteus version 2.0 RC2

Post#129 by Ahau » 17 Feb 2013, 20:42

Hi rava,

sorry for the slow responses, I've had some family illness issues keeping me busy.

Fanthom maintains gnome-mplayer because it is common across all desktops (in 002-xorg.xzm) and I maintain audacious ( in 0091-xfce-apps.xzm).

try using 'man alsamixer' in a terminal for help on alsamixer. 'alsamixer --help' will give info too.

Try 'alsamixer -c 1' or perhaps 'alsamixer -c 1 -D 9' to specify your card/device. you can also hit f6 in alsamixer to change between cards. I have searched high and low for a good gui mixer, but they all have lots of dependencies or are ugly, lack functions, etc.

I am still trying to figure out how to handle instances where multiplre pci sound devices use the same driver. udev rules should be able to do it but I haven't found a working example for this. If the above does not work, please try closing volumeicon, then open a terminal and unload/reload your sound driver:

rmmod snd-hda-intel
wait one second
modprobe snd-hda-intel

check 'aplay -l' to see if your hdmi card has moved to device 0. if not, unload/reload again. this may not ever work, but it is worth a shot, especially if you notice these devices are sometimes loaded in reverse order on bootup.


I hope this helps!

by the way, what equalizer did yiu try compiling? maybe it is one i have not tried yet.
Please take a look at our online documentation, here. Suggestions are welcome!

nassausky
Black ninja
Black ninja
Posts: 35
Joined: 14 Feb 2013, 18:32
Distribution: Porteus v2.0 rc2 i486
Location: NY

Re: Feedback for Porteus version 2.0 RC2

Post#130 by nassausky » 17 Feb 2013, 21:45

Would it take alot of work to add to the final version of 2.0 changing the color scheme (maybe a dark red border) to thunar when it's running in Super User Mode? When I have multiple thunar windows open, sometimes I forget which one is in Super User Mode.

Thanks :)

hypomania
Samurai
Samurai
Posts: 118
Joined: 10 Mar 2011, 10:50
Distribution: Windows phone
Location: Saudi Arabia

Re: Feedback for Porteus version 2.0 RC2

Post#131 by hypomania » 17 Feb 2013, 23:06

hi
I wrote before that is spell checker not working in Abiword .
but it's work fine, sorry !!
Last edited by hypomania on 19 Feb 2013, 04:08, edited 2 times in total.

gnomic
White ninja
White ninja
Posts: 16
Joined: 29 Dec 2012, 23:56
Distribution: Linuxmint
Location: Aotearoa

Re: Feedback for Porteus version 2.0 RC2

Post#132 by gnomic » 18 Feb 2013, 04:54

3G issue again. Downloaded file you suggested and using gui made it xzm, then double-clicked to activate module. NetworkManager remained unresponsive, but after I logged out as guest and in again as root, mobile broadband was activated and I was able to connect to the ISP - so currently using 3G to send this. Thanks for your help and this should be working in 2.0 final with addition of usb_modeswitch. Do you wish me to confirm it works as user guest? This was all in a live session of KDE4.

root@porteus:~# ls -Fail /usr/sbin | grep mode
2626 -rwxr-xr-x 1 root root 44246 Dec 6 09:43 laptop_mode*
3191 -rwxr-xr-x 1 root root 360928 Jan 23 16:35 modem-manager*
14045 -rwxr-xr-x 1 root root 53416 Aug 29 17:18 usb_modeswitch*
13789 -rwxr-xr-x 1 root root 187816 Aug 29 17:18 usb_modeswitch_dispatcher*

User avatar
Rava
Contributor
Contributor
Posts: 1319
Joined: 11 Jan 2011, 02:46
Distribution: Porteus 3.1.0 x86-64 XFCe
Location: Germany

Re: Feedback for Porteus version 2.0 RC2

Post#133 by Rava » 18 Feb 2013, 05:28

Ahau wrote:sorry for the slow responses, I've had some family illness issues keeping me busy.
No problem, buddy, RL should always come first! :) Hope all are better now.
Fanthom maintains gnome-mplayer because it is common across all desktops (in 002-xorg.xzm) and I maintain audacious ( in 0091-xfce-apps.xzm).
Are details like this (about more programs) somewhere documented so we folks know whom best to address?
Ahau wrote:try using 'man alsamixer' in a terminal for help on alsamixer. 'alsamixer --help' will give info too.
Or I just have gone to a virtual terminal and used F1 there. xD
Ahau wrote:Try 'alsamixer -c 1' or perhaps 'alsamixer -c 1 -D 9' to specify your card/device. you can also hit f6 in alsamixer to change between cards. I have searched high and low for a good gui mixer, but they all have lots of dependencies or are ugly, lack functions, etc.
I first try this, and when it not works the other part with rmmod snd-hda-intel ...

But... I prefer a solution with asound.conf, cause this way it is handy to be put in the rootcopy folder for just for the right machine / PC...
Ahau wrote:by the way, what equalizer did you try compiling? maybe it is one i have not tried yet.
This one:

http://www.thedigitalmachine.net/alsaequal.html Alsaequal:
Alsaequal is a real-time adjustable equalizer plugin for ALSA. It can be adjusted using an ALSA compatible mixer, like alsamixergui or alsamixer.

Alsaequal uses the Eq CAPS LADSPA Plugin as it's default equalizer but you can change it to use almost any LADSPA plugin, like mbeq from the swh-plugin package. Though alsaequal is primarily intended to be used as an equalizer you should be able to use it to control any LADSPA plugin. It's similar in functionality to the LADSPA plugin provided with ALSA but allows for real-time controls as opposed to static controls defined in the asoundrc file.
The only dependency seems to be the CAPS LADSPA Package...

Then again, this blog post https://patrick-nagel.net/blog/archives/180 about that very mixers says:
Update (2012-06-16): Having the .asoundrc in place causes Skype to crash after a few seconds (see also this Gentoo Forums post).
*sigh*
Cheers!
Yours Rava

gnomic
White ninja
White ninja
Posts: 16
Joined: 29 Dec 2012, 23:56
Distribution: Linuxmint
Location: Aotearoa

Re: Feedback for Porteus version 2.0 RC2

Post#134 by gnomic » 18 Feb 2013, 08:46

3G - Switched from root back to guest. NM was still showing ISP link for 3G but guest didn't seem able to use it, link would not activate, until the ISP was selected anew with the sequence of dialogues, ie country, provider etc. Still running session in which usb_modeswitch was activated.

guest@porteus:~$ uptime
08:45:26 up 4:15, 1 user, load average: 0.29, 0.16, 0.05

att
Contributor
Contributor
Posts: 131
Joined: 28 Dec 2010, 17:09

Re: Feedback for Porteus version 2.0 RC2

Post#135 by att » 18 Feb 2013, 10:45

I have a problem with Porteus 64bit 2.0 RC2 : It also automounts the USB stick from where it was loaded!
This happens even if I use the "copy2ram" boot parameter.
The problem with this is, that I cannot unmount the bootable USB stick, it says "resource busy".
I cannot find the program that keeps the USB stick open, tho. I tried to find that program with "lsof" , but I could not find anything.
Just to unplug the stick seems to be a bit rude.

Post Reply