Problem with tg3 driver for Broadcom Ethernet cards

Here you can post about your various experiences with PC hardware. You can also post about hardware that is not compatible with the linux kernel or not recommended for use with Porteus.
Post Reply
fondfire
White ninja
White ninja
Posts: 7
Joined: 27 Aug 2011, 08:00
Location: Baton Rouge, Louisiana, USA

Problem with tg3 driver for Broadcom Ethernet cards

Post#1 by fondfire » 09 Feb 2012, 20:19

I was consistently crashing when trying to boot on a BCM95704A6 network card with 32-bit Porteus 1.1. I tried the 3.2.4 kernel and had the same issue.

Finally, I grabbed the tg3 firmware from Broadcom: http://www.broadcom.com/support/etherne ... server.php. After compiling that driver, creating a module to place tg3.ko into /lib/modules/3.2.4-porteus/kernel/drivers/net/ethernet/broadcom/, and rebooting my system on the problem hardware with the new driver, all the problems ceased.

You may want to investigate fixing this driver in the 1.1 kernel or adding a module for this driver.

Thanks!

--fondfire

User avatar
fanthom
Site Admin
Site Admin
Posts: 4548
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland, currently - Cork, IE
Contact:

Re: Problem with tg3 driver for Broadcom Ethernet cards

Post#2 by fanthom » 10 Feb 2012, 07:49

thanks fondfire,

this driver will be updated separately for 3.2.x kernel.
hopefully Broadcom will manage to merge with mainline for 3.3 and up.
Please add [Solved] to your thread title if the solution was found.

Post Reply