Porteus module activation status

For discussions about programming and projects not necessarily associated with Porteus.

Re: Porteus module activation status

Postby Bogomips » 24 Oct 2016, 22:08

jssouza wrote:if copy2ram along with load= and noload= cheatcodes are used, it could be a mixture of modules from base/modules/optional in RAM
As well extramod :)
  • Code: Select all
    root@porteus:/home/guest# usm -i
    ++++++++++++++++++++++++++++++
    usm application information

    USM version:  3.2.0
    DB version:  160320
    Current storage: /tmp/usm
    Current config: /etc/usm/usm.conf
    Current platform: Porteus-v3.2rc4
    Current arch: x86_64
    Current Slackware 14.2
    Current kernel 4.6.3-porteus

    quiet from=/dev/sda10/tmp/iso/rc4/x86_64/KDE.iso copy2ram ramsize=30% noauto rootcopy=/dev/sda4/kd64rcp noload=base/003 extramod=/dev/sda5/xtr64;/dev/sda5/kde5 rammod=base;nvidia

  • Code: Select all
    guest@porteus:~$ ls -lh /mnt/sda5/xtr64
    total 31M
    -rw-r--r-- 1 guest users 31M Jul 11 22:30 nvidia-304.131_rc4-x86_64.xzm
    guest@porteus:~$ ls -lh /mnt/sda5/kde5
    total 225M
    -rw-r--r-- 1 guest users 224M Jul  2 02:07 003-kde5.xzm

  • Code: Select all
    root@porteus:/home/guest# cat /var/log/porteus-livedbg
    # Recognized devices:
    ...
    /dev/sda11: UUID="6a0167f6-5cf7-412d-b85f-0076ca590371" TYPE="swap"

    # Booting device:
    /mnt/isoloop

    # Porteus data found in:
    /mnt/isoloop/porteus

    # Changes are stored in:
    memory

    # Non standard /rootcopy dir:
    /dev/sda4/kd64rcp

    # Modules activated during boot time:
    /memory/copy2ram/000-kernel.xzm
    /memory/copy2ram/001-core.xzm
    /memory/copy2ram/002-xorg.xzm
    /memory/copy2ram/nvidia-304.131_rc4-x86_64.xzm
    /mnt/sda5/kde5/003-kde5.xzm

    ISO=/mnt/sda10/tmp/iso/rc4/x86_64/KDE.iso
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
Bogomips
Full of knowledge
Full of knowledge
 
Posts: 2296
Joined: 25 Jun 2014, 16:21
Location: London
Distribution: 3.2.2 Cinnamon & KDE5

Re: Porteus module activation status

Postby Bogomips » 29 Oct 2016, 02:43

Ed_P wrote:
brokenman wrote:If you are checking all conditions, don't forget the scenario where one boots via iso and uses copy2ram.

If one boots via an iso isn't the iso in ram so why would one need to use copy2ram? :unknown:

brokenman wrote:They wouldn't. But if they did you would find a different set of circumstances in /mnt/live/ which have to be taken into account when scripting.


Ed_P wrote:If one boots via an iso isn't the iso in ram
This was somewhat worrying, as the thought arose that had been using copy2ram to no purpose.

If I read it correctly, there are only two places where copy2ram is referenced:
  • Before copying modules to RAM
  • Before checking for removable booting medium
So it seems the only way one can receive a message that booting media are safely removable, is by using copy2ram.

To be doubly sure that copy2ram is not irrelevant when booting via an iso, had a bit of fun doctoring an initrd to provide relevant diagnostic output:
  • copy2ram
    • Upon entry to Live System
      Code: Select all
      guest@porteus:~$ free -m
                    total        used        free      shared  buff/cache   available
      Mem:            879         318          78         248         482         150
      Swap:           644          32         612

    • Code: Select all
      quiet debug from=/dev/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso copy2ram ramsize=30% noauto rootcopy=/dev/sda4/cin_rcp

    • Prior to Live System entry
      Code: Select all
      Live System ready. About to Pivot Root:

      free -m
                   total         used         free       shared      buffers
      Mem:           879          281          598          260            1
      -/+ buffers:                280          599
      Swap:            0            0            0

      ls -lh /memory/images
      total 0
      drwxr-xr-x    7      83 000-kernel.xzm
      drwxr-xr-x   19     268 001-core.xzm
      drwxr-xr-x    9     130 002-xorg.xzm
      drwxr-xr-x   11     141 003-cinnamon.xzm

      ls -lh /memory/copy2ram
      total 266472
      -rw-r--r--    1   42.8M 000-kernel.xzm
      -rw-r--r--    1   65.6M 001-core.xzm
      -rw-r--r--    1   78.3M 002-xorg.xzm
      -rw-r--r--    1   73.5M 003-cinnamon.xzm

      losetup
      /dev/loop1: 0 /memory/copy2ram/000-kernel.xzm
      /dev/loop2: 0 /memory/copy2ram/001-core.xzm
      /dev/loop3: 0 /memory/copy2ram/002-xorg.xzm
      /dev/loop4: 0 /memory/copy2ram/003-cinnamon.xzm

      mount
      aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
      /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop)
      /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop)
      /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop)
      /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop)

    • At the End of the Day (Shutdown):
      Code: Select all
      free -m
                   total         used         free       shared      buffers
      Mem:           879          293          586          275            0
      -/+ buffers:                280          599
      Swap:            0            0            0

      ls -lh /memory/images
      total 0
      drwxr-xr-x   2     40 000-kernel.xzm
      drwxr-xr-x   2     40 001-core.xzm
      drwxr-xr-x   2     40 002-xorg.xzm
      drwxr-xr-x   2     40 003-cinnamon.xzm

      ls -lh /memory/copy2ram
      total 266472
      -rw-r--r--    1   42.8M 000-kernel.xzm
      -rw-r--r--    1   65.6M 001-core.xzm
      -rw-r--r--    1   78.3M 002-xorg.xzm
      -rw-r--r--    1   73.5M 003-cinnamon.xzm

      losetup

      mount
  • [copy2ram]
    • Upon entry to Live System
      Code: Select all
      guest@porteus:~$ free -m
                    total        used        free      shared  buff/cache   available
      Mem:            879         352          78          25         448         337
      Swap:           517           0         516

    • Code: Select all
      quiet debug from=/dev/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso ramsize=30% noauto rootcopy=/dev/sda4/cin_rcp

    • Prior to Live System entry
      Code: Select all
      Live System ready. About to Pivot Root:

      free -m
                   total         used         free       shared      buffers
      Mem:           879           28          851            0            2
      -/+ buffers:                 26          853
      Swap:            0            0            0

      ls -lh /memory/images
      total 0
      drwxr-xr-x    7      83 000-kernel.xzm
      drwxr-xr-x   19     268 001-core.xzm
      drwxr-xr-x    9     130 002-xorg.xzm
      drwxr-xr-x   11     141 003-cinnamon.xzm

      ls -lh /memory/copy2ram
      total 0

      losetup
      /dev/loop0: 0 /mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso
      /dev/loop1: 0 /mnt/isoloop/porteus/base/000-kernel.xzm
      /dev/loop2: 0 /mnt/isoloop/porteus/base/001-core.xzm
      /dev/loop3: 0 /mnt/isoloop/porteus/base/002-xorg.xzm
      /dev/loop4: 0 /mnt/isoloop/porteus/base/003-cinnamon.xzm

      mount
      /dev/loop0 on /mnt/isoloop type iso9660 (loop,ro)
      aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
      /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop,ro)
      /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop,ro)
      /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop,ro)
      /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop,ro)

    • At the End of the Day (Shutdown):
      Code: Select all
      free -m
                   total         used         free       shared      buffers
      Mem:           879          126          752            15           11
      -/+ buffers:                115          764
      Swap:            0            0            0

      ls -lh /memory/images
      total 0
      drwxr-xr-x   2     40 000-kernel.xzm
      drwxr-xr-x   2     40 001-core.xzm
      drwxr-xr-x   2     40 002-xorg.xzm
      drwxr-xr-x   2     40 003-cinnamon.xzm

      ls -lh /memory/copy2ram
      total 0

      losetup

      mount

Comparing memory usage clearly shows a difference when using copy2ram in the case of bootiing from ISO file. So far noticed no deterioration in performance when not running in RAM, but just from ISO. The bad news is that system is looping at two remove. Firstly on the ISO file, then at two remove on kernel, core, xorg, and cinnamon. So have disk accesses to loop ISO then additional accesses to loop the system modules. The good news however being that some 260M, of limited 879M RAM in total, becomes available. Maybe it's a matter of what you lose on the roundabouts, you gain on the swings. :unknown:

porteus-livedbg
  • copy2ram
    Code: Select all
    quiet debug from=/dev/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso copy2ram ramsize=30% noauto rootcopy=/dev/sda4/cin_rcp

    Prior to copying of rootcopy folder

    free -m
                 total         used         free       shared      buffers
    Mem:           879          804           75          262            1
    -/+ buffers:                802           76
    Swap:            0            0            0

    ls -lh /memory/images
    total 0
    drwxr-xr-x    7      83 000-kernel.xzm
    drwxr-xr-x   19     268 001-core.xzm
    drwxr-xr-x    9     130 002-xorg.xzm
    drwxr-xr-x   11     141 003-cinnamon.xzm

    ls -lh /memory/copy2ram
    total 266472
    -rw-r--r--    1   42.8M 000-kernel.xzm
    -rw-r--r--    1   65.6M 001-core.xzm
    -rw-r--r--    1   78.3M 002-xorg.xzm
    -rw-r--r--    1   73.5M 003-cinnamon.xzm

    losetup
    /dev/loop0: 0 /mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso
    /dev/loop1: 0 /memory/copy2ram/000-kernel.xzm
    /dev/loop2: 0 /memory/copy2ram/001-core.xzm
    /dev/loop3: 0 /memory/copy2ram/002-xorg.xzm
    /dev/loop4: 0 /memory/copy2ram/003-cinnamon.xzm

    mount
    /dev/loop0 on /mnt/isoloop type iso9660 (loop,ro)
    aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
    /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop)
    /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop)
    /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop)
    /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop)

    After renewed Setup of File System Table and Before checking for copy into ram of removable media

    free -m
                 total         used         free       shared      buffers
    Mem:           879          807           72          262            3
    -/+ buffers:                804           75
    Swap:            0            0            0

    ls -lh /memory/images
    total 0
    drwxr-xr-x    7      83 000-kernel.xzm
    drwxr-xr-x   19     268 001-core.xzm
    drwxr-xr-x    9     130 002-xorg.xzm
    drwxr-xr-x   11     141 003-cinnamon.xzm

    ls -lh /memory/copy2ram
    total 266472
    -rw-r--r--    1   42.8M 000-kernel.xzm
    -rw-r--r--    1   65.6M 001-core.xzm
    -rw-r--r--    1   78.3M 002-xorg.xzm
    -rw-r--r--    1   73.5M 003-cinnamon.xzm

    losetup
    /dev/loop0: 0 /mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso
    /dev/loop1: 0 /memory/copy2ram/000-kernel.xzm
    /dev/loop2: 0 /memory/copy2ram/001-core.xzm
    /dev/loop3: 0 /memory/copy2ram/002-xorg.xzm
    /dev/loop4: 0 /memory/copy2ram/003-cinnamon.xzm

    mount
    /dev/loop0 on /mnt/isoloop type iso9660 (loop,ro)
    aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
    /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop)
    /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop)
    /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop)
    /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop)

    # Recognized devices:
    ...
    /dev/sda11: UUID="6a0167f6-5cf7-412d-b85f-0076ca590371" TYPE="swap"

    # Booting device:
    /mnt/isoloop

    # Porteus data found in:
    /mnt/isoloop/porteus

    # Changes are stored in:
    memory

    # Non standard /rootcopy dir:
    /dev/sda4/cin_rcp

    # Modules activated during boot time:
    /memory/copy2ram/000-kernel.xzm
    /memory/copy2ram/001-core.xzm
    /memory/copy2ram/002-xorg.xzm
    /memory/copy2ram/003-cinnamon.xzm

    ISO=/mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso

    Live System ready. About to Pivot Root:

    free -m
                 total         used         free       shared      buffers
    Mem:           879          281          598          260            1
    -/+ buffers:                280          599
    Swap:            0            0            0

    ls -lh /memory/images
    total 0
    drwxr-xr-x    7      83 000-kernel.xzm
    drwxr-xr-x   19     268 001-core.xzm
    drwxr-xr-x    9     130 002-xorg.xzm
    drwxr-xr-x   11     141 003-cinnamon.xzm

    ls -lh /memory/copy2ram
    total 266472
    -rw-r--r--    1   42.8M 000-kernel.xzm
    -rw-r--r--    1   65.6M 001-core.xzm
    -rw-r--r--    1   78.3M 002-xorg.xzm
    -rw-r--r--    1   73.5M 003-cinnamon.xzm

    losetup
    /dev/loop1: 0 /memory/copy2ram/000-kernel.xzm
    /dev/loop2: 0 /memory/copy2ram/001-core.xzm
    /dev/loop3: 0 /memory/copy2ram/002-xorg.xzm
    /dev/loop4: 0 /memory/copy2ram/003-cinnamon.xzm

    mount
    aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
    /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop)
    /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop)
    /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop)
    /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop)

  • [copy2ram]
    Code: Select all
    quiet debug from=/dev/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso ramsize=30% noauto rootcopy=/dev/sda4/cin_rcp
    Prior to copying of rootcopy folder

    free -m
                 total         used         free       shared      buffers
    Mem:           879           23          856            1            1
    -/+ buffers:                 22          857
    Swap:            0            0            0

    ls -lh /memory/images
    total 0
    drwxr-xr-x    7      83 000-kernel.xzm
    drwxr-xr-x   19     268 001-core.xzm
    drwxr-xr-x    9     130 002-xorg.xzm
    drwxr-xr-x   11     141 003-cinnamon.xzm

    ls -lh /memory/copy2ram
    total 0

    losetup
    /dev/loop0: 0 /mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso
    /dev/loop1: 0 /mnt/isoloop/porteus/base/000-kernel.xzm
    /dev/loop2: 0 /mnt/isoloop/porteus/base/001-core.xzm
    /dev/loop3: 0 /mnt/isoloop/porteus/base/002-xorg.xzm
    /dev/loop4: 0 /mnt/isoloop/porteus/base/003-cinnamon.xzm

    mount
    /dev/loop0 on /mnt/isoloop type iso9660 (loop,ro)
    aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
    /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop,ro)
    /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop,ro)
    /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop,ro)
    /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop,ro)

    After renewed Setup of File System Table and Before checking for copy into ram of removable media

    free -m
                 total         used         free       shared      buffers
    Mem:           879           31          847            2            2
    -/+ buffers:                 29          850
    Swap:            0            0            0

    ls -lh /memory/images
    total 0
    drwxr-xr-x    7      83 000-kernel.xzm
    drwxr-xr-x   19     268 001-core.xzm
    drwxr-xr-x    9     130 002-xorg.xzm
    drwxr-xr-x   11     141 003-cinnamon.xzm

    ls -lh /memory/copy2ram
    total 0

    losetup
    /dev/loop0: 0 /mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso
    /dev/loop1: 0 /mnt/isoloop/porteus/base/000-kernel.xzm
    /dev/loop2: 0 /mnt/isoloop/porteus/base/001-core.xzm
    /dev/loop3: 0 /mnt/isoloop/porteus/base/002-xorg.xzm
    /dev/loop4: 0 /mnt/isoloop/porteus/base/003-cinnamon.xzm

    mount
    /dev/loop0 on /mnt/isoloop type iso9660 (loop,ro)
    aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
    /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop,ro)
    /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop,ro)
    /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop,ro)
    /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop,ro)

    # Recognized devices:
    ...
    /dev/sda11: UUID="6a0167f6-5cf7-412d-b85f-0076ca590371" TYPE="swap"

    # Booting device:
    /mnt/isoloop

    # Porteus data found in:
    /mnt/isoloop/porteus

    # Changes are stored in:
    memory

    # Non standard /rootcopy dir:
    /dev/sda4/cin_rcp

    # Modules activated during boot time:
    /mnt/isoloop/porteus/base/000-kernel.xzm
    /mnt/isoloop/porteus/base/001-core.xzm
    /mnt/isoloop/porteus/base/002-xorg.xzm
    /mnt/isoloop/porteus/base/003-cinnamon.xzm

    ISO=/mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso
    Live System ready. About to Pivot Root:

    free -m
                 total         used         free       shared      buffers
    Mem:           879           28          851            0            2
    -/+ buffers:                 26          853
    Swap:            0            0            0

    ls -lh /memory/images
    total 0
    drwxr-xr-x    7      83 000-kernel.xzm
    drwxr-xr-x   19     268 001-core.xzm
    drwxr-xr-x    9     130 002-xorg.xzm
    drwxr-xr-x   11     141 003-cinnamon.xzm

    ls -lh /memory/copy2ram
    total 0

    losetup
    /dev/loop0: 0 /mnt/sda10/tmp/iso/v3.2/i586/Porteus-CINNAMON-v3.2rc5-i586.iso
    /dev/loop1: 0 /mnt/isoloop/porteus/base/000-kernel.xzm
    /dev/loop2: 0 /mnt/isoloop/porteus/base/001-core.xzm
    /dev/loop3: 0 /mnt/isoloop/porteus/base/002-xorg.xzm
    /dev/loop4: 0 /mnt/isoloop/porteus/base/003-cinnamon.xzm

    mount
    /dev/loop0 on /mnt/isoloop type iso9660 (loop,ro)
    aufs on /union type aufs (nowarn_perm,xino=/memory/xino/.aufs.xino,br:/memory/changes=rw)
    /dev/loop1 on /memory/images/000-kernel.xzm type squashfs (loop,ro)
    /dev/loop2 on /memory/images/001-core.xzm type squashfs (loop,ro)
    /dev/loop3 on /memory/images/002-xorg.xzm type squashfs (loop,ro)
    /dev/loop4 on /memory/images/003-cinnamon.xzm type squashfs (loop,ro)

Last edited by Bogomips on 06 Nov 2016, 15:56, edited 2 times in total.
Reason: loop vs memory
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
Bogomips
Full of knowledge
Full of knowledge
 
Posts: 2296
Joined: 25 Jun 2014, 16:21
Location: London
Distribution: 3.2.2 Cinnamon & KDE5

Re: Porteus module activation status

Postby jssouza » 21 Feb 2017, 14:18

Here is a small script that can dynamically update the status of activated modules in openbox's context menu. It uses openbox's menu feature called Pipe Menus. This way, a single right click should show the activated modules in openbox, as well as desktops that use openbox like LXDE/LXQT. The menu updates automatically when new modules are activated/deactivated.
Code: Select all
#!/bin/bash

NUM_MODULES=$(ls -1 "/mnt/live/memory/images/" | wc -l)
echo "<openbox_pipe_menu>"
echo "<item label=\"Modules Activated: $NUM_MODULES\"/>"
echo "<separator/>"
for MODULE in $(ls -1 "/mnt/live/memory/images/"); do
  echo "<item label=\""$MODULE"\"/>"
done
echo "</openbox_pipe_menu>"

Save this as lsmodules.sh (executable bit set) in /home/guest/.config/openbox.

Update openbox's menu.xml (usually, this is /home/guest/.config/openbox/menu.xml) and add the following lines:
Code: Select all
  <separator />
  <menu id="lsmodules" label="Porteus Modules" execute="/home/guest/.config/openbox/lsmodules.sh" />

Log out and log back in or just run in a terminal
Code: Select all
openbox --reconfigure

The right click context menu should now show the list of activated modules.
Image

On LXDE, I use /home/guest/.config/openbox/lxde-rc.xml to take a local menu in /home/guest/.config/openbox/lxde-menu.xml where the openbox menu items are updated.
jssouza
Samurai
Samurai
 
Posts: 112
Joined: 09 Jul 2015, 15:17
Location: Liechtenstein
Distribution: Porteus x86 arm

Re: Porteus module activation status

Postby ncmprhnsbl » 03 Mar 2017, 04:37

cool.. i'll look at including this in my next 003-openbox module ... thanks :)
Forum Rules : http://forum.porteus.org/viewtopic.php?f=35&t=44
User avatar
ncmprhnsbl
Full of knowledge
Full of knowledge
 
Posts: 685
Joined: 20 Mar 2012, 04:42
Location: australia
Distribution: 3.2.2-64bit xfce/openbox

Re: Porteus module activation status

Postby jssouza » 03 Mar 2017, 16:06

Glad you like it :)
jssouza
Samurai
Samurai
 
Posts: 112
Joined: 09 Jul 2015, 15:17
Location: Liechtenstein
Distribution: Porteus x86 arm

Previous

Return to Programming



Who is online

Users browsing this forum: No registered users and 1 guest