SOLVED! : SanDisk Ultra Dual OTG 3.0 is bootable?

Post here if you are a new Porteus member and you're looking for some help.
User avatar
Obosan
Samurai
Samurai
Posts: 114
Joined: 28 Mar 2014, 17:02
Distribution: Porteus v5.01 MATE
Location: JAPAN

SOLVED! : SanDisk Ultra Dual OTG 3.0 is bootable?

Post#1 by Obosan » 12 Oct 2016, 12:16

Hello, everyone! :angel:
I bought 2 pcs of SanDisk Ultra Dual OTG 3.0 16GB in order to make Porteus v3.1 bootable USB for my teacher.

Using GParted, 1st partition FAT32 formatted with boot flag and put boot folder of porteus ISO and 2nd partition ext2 formatted and put porteus folder.
Then I executed the Porteus-installer-for-Linux.com script: as root successfully.
I think the extlinux bootloader should have been installed on the device formatted with FAT32 with this script.

When I boot using PLOP to select USB as target, it shows as follows:

LOADING EHCI DRIVER
SEARCHING ON HOSTS
HOST1
Port 2: DEVICE CONNECTED

Nothing happened after all.

pqi (except pqi U276) and siliconpower pen drives work well based on above mentioned procedure.

Could you tell me whether this is a problem of the pen drive and/or USB 3.0 issue or my way of installation?
This is my first attempt to use USB3.0, so I wander if it is due to U3.0 or SanDisk.

Thanks for your kind attention in advance! :Rose:
Last edited by Obosan on 15 Oct 2016, 13:20, edited 1 time in total.

User avatar
Ed_P
Contributor
Contributor
Posts: 8341
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#2 by Ed_P » 12 Oct 2016, 14:43

Have you seen this posting: viewtopic.php?f=81&t=4632&p=33638#p33604

The only thing I need to do to boot the USB drive is to disable the pc's EFI Secure Boot option and reboot with the USB drive plugged in.
Ed

User avatar
Obosan
Samurai
Samurai
Posts: 114
Joined: 28 Mar 2014, 17:02
Distribution: Porteus v5.01 MATE
Location: JAPAN

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#3 by Obosan » 12 Oct 2016, 21:08

Thanks, Ed_P!

Since I have a basic AMI BIOS computer, I am afraid I don't have UEFI Secure Boot option.
I read your posts in SanDisk forum too.

User avatar
Ed_P
Contributor
Contributor
Posts: 8341
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#4 by Ed_P » 12 Oct 2016, 21:14

Obosan wrote:Since I have a basic AMI BIOS computer, I am afraid I don't have UEFI Secure Boot option.
That's ok, just change the boot sequence order in the BIOS so the USB drive is before the harddrive. The format can stay the same.
I read your posts in SanDisk forum too.
:oops:

:D
Ed

User avatar
Obosan
Samurai
Samurai
Posts: 114
Joined: 28 Mar 2014, 17:02
Distribution: Porteus v5.01 MATE
Location: JAPAN

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#5 by Obosan » 12 Oct 2016, 21:45

@Ed_P :)
As I above mentioned, I use PLOP Boot Manager for USB boot.
My psi pen drive works fine with this, but SanDisk USB drive doesn't.

The order is as follows:
CD-ROM
Removable drive
Hard Disk

Thanks for your prompt reply!

Jack
Contributor
Contributor
Posts: 1857
Joined: 09 Aug 2013, 14:25
Distribution: Porteus and Nemesis
Location: USA

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#6 by Jack » 12 Oct 2016, 21:59

My boot order is this.

Removable drive
CD-ROM
Hard Disk

That was the way to get it to work for me.
I just like Slackware because I think it teach you about Linux to build packages where Ubuntu is like Windows you just install programs you want.

User avatar
Ed_P
Contributor
Contributor
Posts: 8341
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#7 by Ed_P » 12 Oct 2016, 23:17

Obosan wrote:@Ed_P :)
As I above mentioned, I use PLOP Boot Manager for USB boot.
My psi pen drive works fine with this, but SanDisk USB drive doesn't.
I'm unclear as to where you have PLOP and what you have on the USB drive. Is PLOP on the USB drive? And if so how is Porteus on the USB drive? An ISO?
Ed

User avatar
Ed_P
Contributor
Contributor
Posts: 8341
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 5.01 ISO
Location: Western NY, USA

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#8 by Ed_P » 13 Oct 2016, 00:02

Obosan wrote:in order to make Porteus v3.1 bootable USB for my teacher.

Using GParted, 1st partition FAT32 formatted with boot flag and put boot folder of porteus ISO and 2nd partition ext2 formatted and put porteus folder.
Then I executed the Porteus-installer-for-Linux.com script: as root successfully.
I think the extlinux bootloader should have been installed on the device formatted with FAT32 with this script.
Ok, I think I understand now. And I think your scenario may be more complicated than it needs to be. I would remove PLOP and simply install Porteus directly to the drive and then boot the machine. That should impress your teacher.

If you want the drive to be multibootable keep PLOP and have it boot the Porteus ISO not an install. I've never used PLOP so I can't help you with parameters it will need. I use grub4dos and grub2win to multiboot flash drives and ISOs.
Ed

User avatar
Obosan
Samurai
Samurai
Posts: 114
Joined: 28 Mar 2014, 17:02
Distribution: Porteus v5.01 MATE
Location: JAPAN

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#9 by Obosan » 13 Oct 2016, 04:27

I use PLOP Boot Manager for my 11years old PC which doesn't have USB boot option in BIOS.
It works very well for me with Porteus USB drive. I like this distribution very much.
I inform you I have made two bootable sticks of PQI 4GB & 8GB this morning, and will bring them to my teacher.

My question is actually why this SanDisk stick doesn't boot like my other brands sticks.

I tried following ways without any success:
1) Add LBA with boot flag
2) Formatted 1st partition FAT16 instead of FAT32
2a) flag boot
2b) flag boot, LBA
3) Formatted full size ext2

If there is a solution that makes this SanDisk bootable, that will be really helpful.

User avatar
francois
Contributor
Contributor
Posts: 6434
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#10 by francois » 13 Oct 2016, 08:12

konnichiwa obosan. :D

Nice to see you on the porteus forum.

I am sorry that I am of no help to you.
Prendre son temps, profiter de celui qui passe.

User avatar
Obosan
Samurai
Samurai
Posts: 114
Joined: 28 Mar 2014, 17:02
Distribution: Porteus v5.01 MATE
Location: JAPAN

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#11 by Obosan » 13 Oct 2016, 11:02

Ohayo Gozaimasu, francois!
It's early in the morning in your city, isn't it?

I'm still working on this issue.
Visiting my parents home where my father has Win7 Toshiba laptop, I execute diskpart.exe to change MBR format of the disks.
It takes time so during the formatting I took a hot bath watching baseball game on TV.

Salut! :Rose:

beny
Full of knowledge
Full of knowledge
Posts: 2086
Joined: 02 Jan 2011, 11:33
Location: italy

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#12 by beny » 13 Oct 2016, 13:14

hi, obosan please try neko script to format the usb key,and install the neko's iso inside,maybe sandisk have done this key for android device,but...if you do this not from an arch installation,slackware system have a better compatibility for this task.the target of this is the automation of format with a dual file system.

User avatar
francois
Contributor
Contributor
Posts: 6434
Joined: 28 Dec 2010, 14:25
Distribution: xfce plank porteus nemesis
Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#13 by francois » 13 Oct 2016, 14:21

No, it is not morning but noon. I am on a trip in Andalousia, learning the spanish langage so to speak.

I think that beny is the one who will save you. :wink:

Bonne chance.
Prendre son temps, profiter de celui qui passe.

User avatar
Obosan
Samurai
Samurai
Posts: 114
Joined: 28 Mar 2014, 17:02
Distribution: Porteus v5.01 MATE
Location: JAPAN

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#14 by Obosan » 15 Oct 2016, 00:01

@Ciao, beny!
Ti ringrazio tanto! :D
I activated live-usb-3.1-noarch-7.xzm (352 K) of neko's Simple USB Flash Installer and made one bootable disk with it.
Thanks for your suggestion.
However, it also freezes at the same point:
LOADING EHCI DRIVER
SEARCHING ON HOSTS
HOST1
Port 2: DEVICE CONNECTED
Peccato! :sorry:

@Hola, francois!
¡buen viaje! :Bravo:

User avatar
brokenman
Site Admin
Site Admin
Posts: 6105
Joined: 27 Dec 2010, 03:50
Distribution: Porteus v4 all desktops
Location: Brazil

Re: SanDisk Ultra Dual OTG 3.0 is bootable?

Post#15 by brokenman » 15 Oct 2016, 01:06

Hi Obosan.

Please check if your kernel has the options:
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
How do i become super user?
Wear your underpants on the outside and put on a cape.

Post Reply