Error when installing to USB
Posted: 01 Nov 2014, 18:36
I am not able to install porteus to a usb stick at the moment. I had the same problem previously but somehow managed to install it in the end but now I can't find a way around the problem and cannot remember what I did before. The usb stick (sdc1) is formatted to ext4 but I am getting a message saying it cannot install because of error code 3. Here is the debug log:
Code: Select all
device: /dev/sdc
partition: /dev/sdc1
partition number: 1
partition mount point: /media/sdc1-usb-FLASH_Drive_SM_U
installation path: /media/sdc1-usb-FLASH_Drive_SM_U/boot
subfolder:
filesystem: ext4
bootloader: extlinux
error code: 3
system: hyperion 3.16.0-pf1 x86_64
mount details: /dev/sdc1 /media/sdc1-usb-FLASH_Drive_SM_U ext4 rw,nosuid,nodev,noexec,noatime,data=ordered 0 0
full partition scheme:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00029291
Device Boot Start End Blocks Id System
/dev/sda1 2048 264191 131072 83 Linux
/dev/sda2 264192 8652799 4194304 82 Linux swap / Solaris
/dev/sda3 8652800 976773167 484060184 83 Linux
Disk /dev/sdb: 3.8 GiB, 4026531840 bytes, 7864320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 8192 7864319 3928064 b W95 FAT32
Disk /dev/sdc: 3.7 GiB, 3932160000 bytes, 7680000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd1b84d23
Device Boot Start End Blocks Id System
/dev/sdc1 * 2048 7679999 3838976 83 Linux