Page 1 of 1
Disabled network management at boot
Posted: 10 Aug 2013, 05:54
by nobrainer
Hi,
I'm using Porteus 4.1 customised build ISO to boot from CD. During boot messages confirm that network manager and dhcpcd are disabled automatically. As a result, on opening network manager is grayed out and i'm unable feed settings for eth0 & eth1. (I 've 2 network cards one connected to internet and other to LAN.) Hence there is no internet & LAN access.
Please help.
Re: Disabled network management at boot
Posted: 10 Aug 2013, 09:03
by fanthom
did you select 'nonetwork' option during the wizard?
if yes then please create new ISO and do not enable this option. if not then please post the output of 'lspci -knn' command.
thanks
Re: Disabled network management at boot
Posted: 10 Aug 2013, 12:11
by nobrainer
No. Most probably I didnot select nonetwork option.
Still, i am posting output of lspci -knn from terminal -
Code: Select all
root@porteus:~# lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: i915
00:03.0 Communication controller [0780]: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller [8086:29c4] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC-2 Gigabit Network Connection [8086:294c] (rev 02)
Subsystem: Intel Corporation Device [8086:0001]
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: Intel Corporation Device [8086:0002]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 02)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02)
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IH (ICH9DH) LPC Interface Controller [8086:2912] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: i801_smbus
02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101] (rev b2)
Subsystem: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101]
Kernel driver in use: pata_marvell
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Device [4554:434e]
Kernel driver in use: 8139too
06:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023]
Subsystem: Intel Corporation Device [8086:5044]
Kernel driver in use: firewire_ohci
root@porteus:~#
Thanks for helping.
Re: Disabled network management at boot
Posted: 10 Aug 2013, 13:23
by francois
@nobrainer:
Really it would be good that you do the first step of the problem solving proposed by fanthom:
did you select 'nonetwork' option during the wizard
That is redo the whole process making sure that you do not select `nonetwork`.
lspci is the second step, and of no use if you did not follow the first step. I would be surprised that fanthom will go further with your demand. In addition for lenghty output, use the Code limits to shrink the space taken by your post.
Re: Disabled network management at boot
Posted: 10 Aug 2013, 14:10
by fanthom
@nobrainer
lspci shows that both of your ethernet cards are supported and this sentence:
During boot messages confirm that network manager and dhcpcd are disabled automatically.
tells me that you are using 'nonetwork' cheatcode somehow (wizard fault?). please run 'cat /proc/cmdline' and check if you get 'nonetwork' string. if yes then:
a) remove every occurrence of it from /boot/syslinux/porteus.cfg
b) if you are saving changes then please read 'nonetwork' cheat description in /boot/docs/cheatcodes.txt and follow instructions to bring back dhcpcd/network manager.
thanks
