No Internet

[Argo Navis]

Hello!
I'ma total newbie here, with Porteus, and mostly with Linux.
I installed Porteus 5.0 on a usb stick, I am booting on a Intel Gram laptop, it boots fine, but it doesn't connect to the internet.
In the Settings, I see a "Network" option, but there is only something about a VPN, nothing about wifi or other network access.
Do I have to manually mount the wifi chip?
I ran the -lspci command in terminal and got this line that seemed relevant:

00:14.3 Network controller: Intel Corporation Device 51f0 (rev 01)

Any idea how I can get access to wifi?

[Blaze]

Hi Argo Navis.
Can you replace kernel to 6.6.18 from this tarboll ? 64bit-ALL-kernel6.6.18.tar

Code: Select all

# All operations must be done as root user!

# replace 000-kernel.xzm
# remove crippled_sources.xzm
# optionally add 06-crippled_sources-NNN-XXbit.xzm
/path-to/porteus/base

# replace vmlinuz
/path-to/boot/syslinux

# reboot Porteus

[Argo Navis]

Ok, I managed to do the replacements.
Now when I boot, I see a "Wifi" option in Settings, but it says there is "No Wi-Fi Adapter Found". And then if I close "Settings" or click another option, the Wi-Fi menu option actually disappears and doesn't come back, unless I reboot in "Always Fresh" mode.

[Blaze]

Argo Navis, can you share log of these commands

Code: Select all

su
toor
lspci -knn | egrep 'eth|net|wir' -A8
dmesg | egrep -i 'rtl|intel|net|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'

?

[Argo Navis]

Code: Select all

root@porteus:~# lspci -knn | egrep 'eth|net|wir' -A8
	DeviceName: Onboard - Ethernet
	Subsystem: Intel Corporation Device [8086:0094]
	Kernel modules: iwlwifi
00:15.0 Serial bus controller [0c80]: Intel Corporation Device [8086:51e8] (rev 01)
	DeviceName: Onboard - Other
	Subsystem: LG Electronics, Inc. Device [1854:0443]
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.1 Serial bus controller [0c80]: Intel Corporation Device [8086:51e9] (rev 01)


root@porteus:~# dmesg | egrep -i 'rtl|intel|net|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'
[    0.000000] Linux version 5.18.8-porteus (root@porteus.example.net) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT_DYNAMIC Sat Jul 2 10:05:31 MSK 2022
[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[    0.000000] BIOS-provided physical RAM map:
[    0.005389] ACPI: SSDT 0x00000000432CD000 0039BA (v02 INTEL  IgfxSsdt 00003000 INTL 20200717)
[    0.005391] ACPI: SSDT 0x00000000432BF000 00D3AB (v02 INTEL  TcssSsdt 00001000 INTL 20200717)
[    0.005412] ACPI: DMAR 0x00000000432A7000 000088 (v02 INTEL  EDK2     00000002      01000013)
[    0.005414] ACPI: SSDT 0x00000000432A6000 000BD8 (v02 INTEL  xh_adlLP 00000000 INTL 20200717)
[    0.005418] ACPI: SSDT 0x000000004329D000 000144 (v02 Intel  ADebTabl 00001000 INTL 20200717)
[    0.005472] No NUMA configuration found
[    0.021459] Reserving Intel graphics memory at [mem 0x4c800000-0x503fffff]
[    0.059624] Switched APIC routing to physical flat.
[    0.072081] Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
[    0.072081] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i7-1260P (family: 0x6, model: 0x9a, stepping: 0x3)
[    0.072081] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.097379] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.143210] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.PEG1.VEND], AE_NOT_FOUND (20211217/psargs-330)
[    0.143218] ACPI: Ignoring error and continuing table load
[    0.143219] ACPI Error: Skipping While/If block (20211217/psloop-426)
[    0.143221] ACPI Error: Skipping Else block (20211217/psloop-429)
[    0.143984] ACPI BIOS Error (bug): Failure creating named object [\_TZ.ETMD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.143987] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.144962] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.144965] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.144969] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.144971] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.144975] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.144978] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.144980] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.144983] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.144987] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.144989] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.144992] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.144995] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.144998] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145003] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.TXHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145006] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145021] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145024] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145028] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145030] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145046] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145048] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145051] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145053] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145069] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145071] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145074] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145077] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145092] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145095] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145098] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145100] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145115] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145118] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145121] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145123] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145138] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145141] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145144] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145146] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145162] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145164] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145167] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145169] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145185] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145187] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145190] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145192] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145208] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145210] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145213] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145215] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145232] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145234] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145237] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145239] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145323] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145326] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145328] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145331] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145346] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145349] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145351] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145354] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145369] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145372] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145375] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145377] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145392] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145395] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.145398] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20211217/dswload2-326)
[    0.145400] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20211217/psobject-220)
[    0.146151] ACPI: 16 ACPI AML tables successfully acquired and loaded
[    0.182473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.732133] libata version 3.00 loaded.
[    0.809213] vgaarb: loaded
[    0.813052] pnp: PnP ACPI: found 6 devices
[    0.818112] NET: Registered PF_INET protocol family
[    0.819587] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.821606] DMAR: Intel-IOMMU force enabled due to platform opt in
[    0.821610] DMAR: No ATSR found
[    0.821610] DMAR: No SATC found
[    0.822071] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.833357] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.834407] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.840130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.848147] ACPI: \_SB_.PR00: Found 3 idle states
[    0.852381] ACPI: thermal: [Firmware Bug]: Invalid critical threshold (0)
[    0.857759] loop: module loaded
[    0.862702] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    0.862749] hub 1-0:1.0: USB hub found
[    0.862836] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    0.862868] hub 2-0:1.0: USB hub found
[    0.864456] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    0.864515] hub 3-0:1.0: USB hub found
[    0.864895] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    0.864949] hub 4-0:1.0: USB hub found
[    0.865276] usbcore: registered new interface driver ums-onetouch
[    0.870197] intel_pstate: Intel P-state driver initializing
[    0.872262] intel_pstate: HWP enabled
[    0.881963] intel_pmc_core INT33A1:00:  initialized
[    0.882066] NET: Registered PF_PACKET protocol family
[    0.899918] Loaded X.509 cert 'Build time autogenerated kernel key: 4770dae7eb407557c74aae7a8ac9cd47eb16d4a8'
[    0.900339] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no
[    0.901508]   No soundcards found.
[    1.236810] usb 3-5: New USB device found, idVendor=0408, idProduct=50c3, bcdDevice= 0.06
[    1.366419] usb 4-1: New USB device found, idVendor=13fe, idProduct=6700, bcdDevice= 1.10
[    1.603183] usb 3-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
[    3.451598] exFAT-fs (loop1): failed to read boot sector
[    3.451601] exFAT-fs (loop1): failed to recognize exfat type
[    4.255012] NET: Registered PF_INET6 protocol family
[    5.732456] Consider using thermal netlink events interface
[    5.784023] input: Intel HID events as /devices/platform/INTC1070:00/input/input4
[    5.784114] intel-hid INTC1070:00: platform supports 5 button array
[    5.784127] input: Intel HID 5 button array as /devices/platform/INTC1070:00/input/input5
[    6.172469] intel_rapl_common: Found RAPL domain package
[    6.422606] usb 3-5: Found UVC 1.10 device USB webcam (0408:50c3)
[    6.424751] usb 3-5: Found UVC 1.50 device USB webcam (0408:50c3)
[    6.451191] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    6.461222] NET: Registered PF_BLUETOOTH protocol family
[    6.487108] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    6.531414] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.531851] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.531854] cfg80211: failed to load regulatory.db
[    6.579908] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_14.bin (v2.14)
[    6.668752] Bluetooth: hci0: Debug lock is disabled
[    6.668753] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    6.668833] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0040-0041.sfi (-2)
[    6.692192] Intel(R) Wireless WiFi driver for Linux
[    6.692284] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    6.694559] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-72.ucode failed with error -2
[    6.694580] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-71.ucode failed with error -2
[    6.694598] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-70.ucode failed with error -2
[    6.694616] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-69.ucode failed with error -2
[    6.694634] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-68.ucode failed with error -2
[    6.694652] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-67.ucode failed with error -2
[    6.694670] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-66.ucode failed with error -2
[    6.694688] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-65.ucode failed with error -2
[    6.694707] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-64.ucode failed with error -2
[    6.694725] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-63.ucode failed with error -2
[    6.694743] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-62.ucode failed with error -2
[    6.694760] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-61.ucode failed with error -2
[    6.694779] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-60.ucode failed with error -2
[    6.694796] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-59.ucode failed with error -2
[    6.694812] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-58.ucode failed with error -2
[    6.694829] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-57.ucode failed with error -2
[    6.694847] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-56.ucode failed with error -2
[    6.694863] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-55.ucode failed with error -2
[    6.694880] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-54.ucode failed with error -2
[    6.694897] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-53.ucode failed with error -2
[    6.694914] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-52.ucode failed with error -2
[    6.694931] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-51.ucode failed with error -2
[    6.694948] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-50.ucode failed with error -2
[    6.694965] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-49.ucode failed with error -2
[    6.694982] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-48.ucode failed with error -2
[    6.694999] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-47.ucode failed with error -2
[    6.695016] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-46.ucode failed with error -2
[    6.695033] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-45.ucode failed with error -2
[    6.695049] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-44.ucode failed with error -2
[    6.695066] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-43.ucode failed with error -2
[    6.695087] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-42.ucode failed with error -2
[    6.695106] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-41.ucode failed with error -2
[    6.695124] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-40.ucode failed with error -2
[    6.695142] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-gf-a0-39.ucode failed with error -2
[    6.695146] iwlwifi 0000:00:14.3: no suitable firmware found!
[    6.695147] iwlwifi 0000:00:14.3: minimum version required: iwlwifi-so-a0-gf-a0-39
[    6.695148] iwlwifi 0000:00:14.3: maximum version supported: iwlwifi-so-a0-gf-a0-72
[    6.695149] iwlwifi 0000:00:14.3: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
[    6.704027] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[    6.704032] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    6.726806] i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_69.0.3.bin version 69.0
[    6.726810] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9
[    6.842033] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
[    6.842038] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    6.842058] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[    6.842187] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    8.104066] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa0431080)
[    8.134826] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[    8.221963] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[    8.221966] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[    8.221971] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[    8.222003] sof-audio-pci-intel-tgl 0000:00:1f.3: Direct firmware load for intel/sof/sof-adl.ri failed with error -2
[    8.222005] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof firmware file is missing, you might need to
[    8.222005] sof-audio-pci-intel-tgl 0000:00:1f.3:        download it from https://github.com/thesofproject/sof-bin/
[    8.222006] sof-audio-pci-intel-tgl 0000:00:1f.3: error: failed to load DSP firmware -2
[    8.222466] sof-audio-pci-intel-tgl 0000:00:1f.3: error: sof_probe_work failed err: -2
[    8.971326] intel_rapl_msr: PL4 support detected.
[    8.975764] intel_rapl_common: Found RAPL domain package
[    8.975767] intel_rapl_common: Found RAPL domain core
[    8.975768] intel_rapl_common: Found RAPL domain uncore
[    8.975769] intel_rapl_common: Found RAPL domain psys
[  648.939176] transmission-gt[2420]: segfault at 130 ip 00007f8082db96bd sp 00007f807b5cbad0 error 4 in libevent-2.1.so.7.0.1[7f8082d94000+30000]

[Blaze]

Hi Argo Navis,

• 1st install Porteus again from this repo http://ftp.nluug.nl/os/Linux/distr/port ... eus-v5.01/ (06-Mar-2024)
• 2nd copy firmware-iwlwifi-20240305-noarch-1bl.xzm to

  Code: Select all

  /...your-path/porteus/modules

• 3rd boot up latest Porteus 5.01 with latest updates (comes with kernel 6.6.20)

[Argo Navis]

Thank you, it seems to have solved my connection problems.
I was not sure at first, because my install started acting real buggy after I tried your fix, but it seems it is from another source, something related with the savefile causing hanging during booting. I don't know why, but it seems my computer doesn't like Porteus.
Anyway, thanks again, when I am in Always Fresh, I can connect to the internet fine now.

[Ed_P]

when I am in Always Fresh, I can connect to the internet fine now.

That implies one, or more, of your changes is the problem or one or more of your modules is the problem. Start with AF and gradually add a module into the booting process one by one then your changes. It will help pin point the problem.

[Blaze]

Hi Argo Navis.
Awesome. I need current logs from you

Can you open terminal and run these commands again

Code: Select all

su
toor
dmesg | egrep -i 'rtl|intel|net|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'

and of course share it in this topic?

Thanks.

[Argo Navis]

Here you go:

Code: Select all

[    0.865707] hub 3-0:1.0: USB hub found
[    0.866285] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    0.866320] hub 4-0:1.0: USB hub found
[    0.866615] usbcore: registered new interface driver ums-onetouch
[    0.870471] intel_pstate: Intel P-state driver initializing
[    0.871048] intel_pstate: HWP enabled
[    0.871634] intel_pmc_core INT33A1:00:  initialized
[    0.871743] Initializing XFRM netlink socket
[    0.871749] NET: Registered PF_PACKET protocol family
[    0.903014] Loaded X.509 cert 'Build time autogenerated kernel key: e079c55cfec89f76147f440f05d0b6cfa11e1642'
[    0.904234] Btrfs loaded, zoned=no, fsverity=no
[    0.904359]   No soundcards found.
[    1.237848] usb 3-5: New USB device found, idVendor=0408, idProduct=50c3, bcdDevice= 0.06
[    1.363127] usb 4-1: New USB device found, idVendor=0b27, idProduct=2251, bcdDevice= 1.10
[    1.609136] usb 3-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
[    3.284039] exFAT-fs (loop1): failed to read boot sector
[    3.284039] exFAT-fs (loop1): failed to recognize exfat type

That was not easy because the mouse is not working and the keyboard mapping is changed too, so the keyboard shortcuts are out of whack.
I'm using UFEI in BIOS and the usb is FAT32.

[Argo Navis]

Sorry, I'm posting in two different thread about this, but I just wanted to indicate I solved my problem by changing the way I enter the path to my savefile in porteus.cfg.
Thank you for your help.

On another note, is it common to have troubles with the drivers like I did? The reason I ask is because I want to use Porteus in my classroom with computers brought by my students. They will have all manners of different builds, so it would be kind of a deal breaker if I have to manage everyone like had to with my build. Is it just the Intel machines, or the Broadcom hardware, as I have read many posts about them?

[Ed_P]

Download or create some driver modules and bring them with you to class. If a student has a problem, find out what driver they are missing and copy the appropiate one to their /porteus/modules folder. Use Blaze's code to test their system.

Code: Select all

su
toor
dmesg | egrep -i 'rtl|intel|net|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'

And to make it easier for you you should make Blaze's code a bash script on your Porteus system that you can copy to their system that is having problems and run it.

[Ed_P]

This should work for you:

debug.sh

Code: Select all

#!/bin/sh

# https://forum.porteus.org/viewtopic.php?p=98857#p98857

if [ `whoami` != "root" ]; then
   echo -e "Enter root's password\033[1;31m"
   su -c "sh $0 $1 $2"; exit
fi
echo -e "\033[0m"; echo -en "\033]0;Searching for the problem\a" 

dmesg | egrep -i 'rtl|intel|net|broadcom|wlan|firmware|b43|phy|bcm|fw|wl|error|faile|warn|issue|resolve|found|bug|loaded'
read

Save it on your system and make it executable.

[Argo Navis]

Wow! that is super nice of you!
I'm turbo-learning all this, it's a bit overwhelming, but it is great to see the community is so active and supportive.

Is there a repository for drivers? I can't find anything on porteus.org.

[Blaze]

Drivers? What is kind of devices?