Porteus Superfly, V 0.2 (pre-alpha) is out!

Porteus Superfly - an even lighter implementation of Porteus, for low-end hardware or minimalists.
User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#1 by Ahau » 02 May 2011, 19:05

Hi All,

As some of you may have heard, I've been working on a light(er) weight version of porteus. This is primarily a sandbox for me to learn more about linux. However, I know there are some folks who have been looking to trim porteus down, eliminate KDE, etc. So, perhaps my efforts here will be of some use.

link:

http://www.mediafire.com/?cnl35ts5566hkjw
md5sum: 4d60e7735bca2989d3b9a6848d96880a

INFO:

Superfly uses a different X-server than regular Porteus. It uses Xvesa, a tiny, standalone X-server that can be used on almost any hardware. The downside is that Xvesa has no graphics accelleration, so movement is choppy at times. In future versions, I hope to create a lightweight xorg-server, which will greatly improve the look and feel of Superfly.

Superfly comes with two "default" resolutions. One is for 4:3 format monitors (1024x768). The other is for widescreen monitors (1280x800). You can specify other resolutions with the "xvesa" cheatcode. You need to press tab at the SYSLINUX menu, and add (or modify) the cheatcode, using your desired resolution and color depth. For example, 'xvesa=800x600x8' would give you an 800x600 pixel screen with 8-bit color depth. Higher resolutions and color depths will look better, but may not work on older hardware. You can enter "Xvesa -listmodes" into a console to see the other modes that this version of Xvesa can use. The highest supported resolution for 4:3 is 1280x1024x24, and for widescreen, it is 1680x1050x24.

Superfly uses Openbox with fbpanel, wmsetbg (to set the wallpaper), and slim (login manager). Many thanks to crashman, as I stole most of this setup from his tiny-desktop module.

It also has the following applications:
pcman (file manager)
xterm
aterm
leafpad
Beaver code editor
Xarchiver
gpicview
Xpaint
Xpdf
alsaplayer
midori web broswer + flashplayer

Take a look and let me know your thoughts. More than once, I have felt that this project has little merit, because Porteus is already so lightweight, and several other distros exist that are lighter than what I've created, with greater functionality. At this point, it remains my sandbox, but I'll continue developing it if others are interested. That said, all efforts should first go towards the official versions of Porteus and getting them ready for V1.0 final.

I'd to thank crashman (again), fanthom and brokenman, as well as the developers of Slitaz (a couple of the applications, such as midori, have been ported from Slitaz).

Future goals include:
adding a lightweight xorg server, mplayer, and some cd recording software; importing some or all of the porteus-specific applications, such as xpns-tool, porteus-module-tools, etc. (these don't work yet in superfly, and have been removed -- command line tools do work), and cleaning up the countless bugs that I'm sure will crop up.

This software should be considered highly experimental, and not used for important or sensitive work. It is not part of the official porteus project, and I expect that it will remain unofficial.

Thanks, all!
Please take a look at our online documentation, here. Suggestions are welcome!

User avatar
82issa
DOC Team
DOC Team
Posts: 127
Joined: 13 Apr 2011, 17:24
Location: USA, NC

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#2 by 82issa » 02 May 2011, 20:08

I really can't wait till I get home to try this out.
Sorry guys... I got to go. My girlfriend just casted "get your dirty ass into the shower" on me.
Oh and here is some naked grandpa pictures too.

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5660
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#3 by fanthom » 02 May 2011, 22:39

looks good :)
few small issues which i have found during testing:
- mouse wheel doesnt work for me
- 4 virtual desktops, 2 could be enough (it's my preferences only)
- mc shows letters instead of lines in Xvesa (works ok in text mode)
- /boot/porteus.cfg has saved copy /boot/porteus.cfg~ (have seen also one in /var/log/packages)
- wrong permissions in /boot and /porteus - all files has 777
- spotted some guest perms (1000:1000) in /etc/xdg/....
- 002-Xlibs has copy of dir2xzm script in /bin
- "lock Display" feature doesnt work saying: "failed to execute 'slock' missing file"
- i'm short of entries for porteus tools like pns-tool
- pxe boot could be added to porteus.cfg

overall - nice done :)
Please add [Solved] to your thread title if the solution was found.

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#4 by Ahau » 02 May 2011, 22:53

Thanks!

I think the mousewheel can be fixed with some changes to Xvesa's configuration. I'll look into it and get an update out.

The permissions issues you see are a result of me saving files to rootcopy in my FAT-formatted flash drive, then copying back into the modules, I'll clean that up.

002-Xlibs has a number of items from /bin that should be in 001-core. This is an error in 32-bit beta, and I should have merged one of my modules into 001 instead of 002. Will be fixed in next version (it will also reduce the .iso size a little bit).

I'll also look into slock. whether or not I implement it will depend on how big it is (with any dependencies).

pns-tool is installed for use on the command line, but the graphical versions don't work in Xvesa, so I removed the .desktop entries from /usr/share/applications. I plan on tracking down whatever is needed for getting "xdialog" to work, and implementing it in the next release.

I'll add a pxe option to the .cfg file, and see if I can test it out.

Thank you very much!!!
Please take a look at our online documentation, here. Suggestions are welcome!

User avatar
82issa
DOC Team
DOC Team
Posts: 127
Joined: 13 Apr 2011, 17:24
Location: USA, NC

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#5 by 82issa » 03 May 2011, 12:17

I am still trying to work out a problem on my laptop. I use the cheatcode from_iso=/psf.iso and have also tried from_dir=/psf/.
Seems to boot fine, but locks up when xvesa starts. I am gona double check some things, and get back to you. also tried changing resolution 800x600x16 still same problem.

Posted after 3 minutes 48 seconds:
Maybe it is this craptastic ati mobility video card.
Sorry guys... I got to go. My girlfriend just casted "get your dirty ass into the shower" on me.
Oh and here is some naked grandpa pictures too.

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#6 by Ahau » 03 May 2011, 14:34

82issa wrote:I am still trying to work out a problem on my laptop. I use the cheatcode from_iso=/psf.iso and have also tried from_dir=/psf/.
Seems to boot fine, but locks up when xvesa starts. I am gona double check some things, and get back to you. also tried changing resolution 800x600x16 still same problem.

Posted after 3 minutes 48 seconds:
Maybe it is this craptastic ati mobility video card.
Thanks, 82issa!

I think your graphics card is not the likely culprit (but I could be wrong). You could try hitting ctrl-alt-F6, logging in to the CLI, and then check the contents of /var/log/slim.log, which should catch the errors coming out of Xvesa.

The more likely culprit is the kernel and initrd you're using, and/or your cheatcodes. Could you give me the KERNEL and APPEND lines from the porteus.cfg entry you're using, as well as the relevant layout of your drive (e.g., kernel and initrd are in /boot/, iso is in /psf/psf.iso). If your kernel and initrd entries are pointing to /boot/vmlinuz and /boot/initrd.xz, and those are from a 64-bit porteus install, you won't be able to boot up the superfly iso (it will try to use the 64-bit kernel to boot a 32-bit system). If that is the case, then try mounting the superfly iso and copying the /boot/ directory and it's contents to /psf/boot/, and edit your porteus.cfg entry to be KERNEL=/psf/boot/vmlinuz, initrd=/psf/boot/initrd.xz, and from_iso=/psf/psf.iso (or whatever you'ved named the iso). That way, you don't have to reinstall SYSLINUX, and you can still point it to the 32-bit kernel and initrd. This same approach could be used for extracting the full contents of the .iso to /psf/boot/ and /psf/porteus/, using the from_dir=/psf/porteus cheatcode together with the kernel and initrd entries above, and being able to run two porteus installs from the same USB device (or frugal hard drive install).

Also, from_iso and from_dir needn't (shouldn't?) be used together. If your iso is in a subdirectory, you can use from_iso=/psf/psf.iso, or from_iso=/mnt/sdXY/psf/psf.iso.

Let me know if that helps at all...if all else fails, you could burn the .iso to a CD and see if it works properly from that.

Thanks again for testing!
Please take a look at our online documentation, here. Suggestions are welcome!

User avatar
82issa
DOC Team
DOC Team
Posts: 127
Joined: 13 Apr 2011, 17:24
Location: USA, NC

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#7 by 82issa » 04 May 2011, 10:13

Code: Select all

May  4 05:39:46 (none) kernel: [    6.789520] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
May  4 05:39:46 (none) kernel: [    6.845676] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
May  4 05:39:46 (none) kernel: [    7.593839] r600_cp: Failed to load firmware "radeon/R600_rlc.bin"
May  4 05:39:46 (none) kernel: [    7.593854] [drm:r600_startup] *ERROR* Failed to load firmware!
May  4 05:39:46 (none) kernel: [    7.593858] radeon 0000:01:05.0: disabling GPU acceleration
May  4 05:39:46 (none) kernel: [    7.594895] radeon 0000:01:05.0: f2850400 unpin not necessary
May  4 05:39:46 (none) kernel: [    7.594898] radeon 0000:01:05.0: f2850400 unpin not necessary
May  4 05:39:46 (none) kernel: [    8.675603] Console: switching to colour frame buffer device 170x48
May  4 05:39:46 (none) kernel: [    8.738925] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
May  4 05:39:46 (none) kernel: [    8.922458] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
May  4 05:39:46 (none) kernel: [    6.789520] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
May  4 05:39:46 (none) kernel: [    6.845676] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
[b][color=#FF0000]May  4 05:39:46 (none) kernel: [    7.593839] r600_cp: Failed to load firmware "radeon/R600_rlc.bin"[/color][/b]
May  4 05:39:46 (none) kernel: [    7.593854] [drm:r600_startup] *ERROR* Failed to load firmware!
May  4 05:39:46 (none) kernel: [    7.593858] radeon 0000:01:05.0: disabling GPU acceleration
May  4 05:39:46 (none) kernel: [    7.594895] radeon 0000:01:05.0: f2850400 unpin not necessary
May  4 05:39:46 (none) kernel: [    7.594898] radeon 0000:01:05.0: f2850400 unpin not necessary
May  4 05:39:46 (none) kernel: [    8.675603] Console: switching to colour frame buffer device 170x48
May  4 05:39:46 (none) kernel: [    8.738925] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
May  4 05:39:46 (none) kernel: [    8.922458] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
that is the last couple lines out of my /var/log/syslog I copied it and

Code: Select all

tail -f >> /mnt/sdb1/logs/syslog

also tail -f the slim.log

Code: Select all

/usr/bin/xauth:  file /var/run/slim.auth does not exist
dmesg

Code: Select all

Initializing
[    0.186185] NetLabel:  domain hash size = 128
[    0.186185] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.186185] NetLabel:  unlabeled traffic allowed by default
[    0.186185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.187054] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.189023] Switching to clocksource hpet
[    0.189141] pnp: PnP ACPI init
[    0.189141] ACPI: bus type pnp registered
[    0.189601] pnp 00:00: [bus 00-ff]
[    0.189604] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.189607] pnp 00:00: [io  0x0d00-0xffff window]
[    0.189610] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.189613] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.189615] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.189618] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.189620] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.189623] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.189626] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.189628] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.189631] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.189633] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.189636] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.189638] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.189641] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.189644] pnp 00:00: [mem 0xc0000000-0xf6ffffff window]
[    0.189646] pnp 00:00: [mem 0xf8000000-0xfed3ffff window]
[    0.189649] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[    0.189651] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.189746] Switched to NOHz mode on CPU #1
[    0.189748] Switched to NOHz mode on CPU #0
[    0.189948] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.190204] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.190207] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.190210] pnp 00:01: [mem 0xf7000000-0xf7ffffff]
[    0.190212] pnp 00:01: [mem 0xfec10000-0xfec1001f]
[    0.190214] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[    0.190359] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.190403] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.190444] system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved
[    0.190484] system 00:01: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.190525] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.190565] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190685] pnp 00:02: [irq 0 disabled]
[    0.190694] pnp 00:02: [irq 8]
[    0.190696] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[    0.190803] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.190847] pnp 00:03: [io  0x0000-0x000f]
[    0.190850] pnp 00:03: [io  0x0081-0x008f]
[    0.190852] pnp 00:03: [io  0x00c0-0x00df]
[    0.190855] pnp 00:03: [dma 4]
[    0.190988] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.191025] pnp 00:04: [io  0x00f0-0x00fe]
[    0.191031] pnp 00:04: [irq 13]
[    0.191113] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.191150] pnp 00:05: [io  0x0070-0x0071]
[    0.191263] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.191271] pnp 00:06: [io  0x0061]
[    0.191373] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.191384] pnp 00:07: [io  0x0060]
[    0.191386] pnp 00:07: [io  0x0064]
[    0.191390] pnp 00:07: [irq 1]
[    0.191494] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.191505] pnp 00:08: [irq 12]
[    0.191634] pnp 00:08: Plug and Play ACPI device, IDs SYN1e28 SYN1e00 SYN0002 PNP0f13 (active)
[    0.191654] pnp 00:09: [io  0x0010-0x001f]
[    0.191656] pnp 00:09: [io  0x002e-0x002f]
[    0.191660] pnp 00:09: [io  0x0072-0x0073]
[    0.191662] pnp 00:09: [io  0x0080]
[    0.191664] pnp 00:09: [io  0x00b0-0x00b1]
[    0.191666] pnp 00:09: [io  0x0092]
[    0.191668] pnp 00:09: [io  0x0400-0x04cf]
[    0.191670] pnp 00:09: [io  0x04d0-0x04d1]
[    0.191672] pnp 00:09: [io  0x04d6]
[    0.191674] pnp 00:09: [io  0x0550]
[    0.191676] pnp 00:09: [io  0x0680-0x06ff]
[    0.191678] pnp 00:09: [io  0x077a]
[    0.191679] pnp 00:09: [io  0x0c00-0x0c01]
[    0.191681] pnp 00:09: [io  0x0c14]
[    0.191683] pnp 00:09: [io  0x0c50-0x0c52]
[    0.191685] pnp 00:09: [io  0x0c6c]
[    0.191687] pnp 00:09: [io  0x0c6f]
[    0.191689] pnp 00:09: [io  0x0cd0-0x0cdb]
[    0.191690] pnp 00:09: [io  0x0380-0x0387]
[    0.191845] system 00:09: [io  0x0400-0x04cf] has been reserved
[    0.191887] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.191926] system 00:09: [io  0x04d6] has been reserved
[    0.191966] system 00:09: [io  0x0550] has been reserved
[    0.192014] system 00:09: [io  0x0680-0x06ff] has been reserved
[    0.192063] system 00:09: [io  0x077a] has been reserved
[    0.192103] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.192142] system 00:09: [io  0x0c14] has been reserved
[    0.192182] system 00:09: [io  0x0c50-0x0c52] has been reserved
[    0.192221] system 00:09: [io  0x0c6c] has been reserved
[    0.192261] system 00:09: [io  0x0c6f] has been reserved
[    0.192300] system 00:09: [io  0x0cd0-0x0cdb] has been reserved
[    0.192340] system 00:09: [io  0x0380-0x0387] has been reserved
[    0.192380] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.192425] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[    0.192428] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[    0.192556] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.192598] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[    0.192638] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.193118] pnp: PnP ACPI: found 11 devices
[    0.193165] ACPI: ACPI bus type pnp unregistered
[    0.232786] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.232861] pci 0000:00:05.0: BAR 15: assigned [mem 0xd0500000-0xd06fffff 64bit pref]
[    0.232909] pci 0000:00:06.0: BAR 14: assigned [mem 0xd0700000-0xd07fffff]
[    0.232951] pci 0000:00:05.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.232991] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.233039] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.233079] pci 0000:00:01.0:   bridge window [mem 0xd0200000-0xd03fffff]
[    0.233120] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.233164] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.233203] pci 0000:00:05.0:   bridge window [io  0x1000-0x1fff]
[    0.233244] pci 0000:00:05.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.233284] pci 0000:00:05.0:   bridge window [mem 0xd0500000-0xd06fffff 64bit pref]
[    0.233330] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0020000-0xd002ffff pref]
[    0.233372] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[    0.233411] pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]
[    0.233452] pci 0000:00:06.0:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.233493] pci 0000:00:06.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.233537] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[    0.233575] pci 0000:00:14.4:   bridge window [io  disabled]
[    0.233617] pci 0000:00:14.4:   bridge window [mem disabled]
[    0.233657] pci 0000:00:14.4:   bridge window [mem pref disabled]
[    0.233707] pci 0000:00:01.0: setting latency timer to 64
[    0.233718] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.233759] pci 0000:00:05.0: setting latency timer to 64
[    0.233765] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.233806] pci 0000:00:06.0: setting latency timer to 64
[    0.233814] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.233816] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.233818] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.233821] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.233823] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.233826] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.233828] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.233831] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.233833] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.233835] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.233838] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.233840] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.233843] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.233845] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.233848] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf6ffffff]
[    0.233850] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff]
[    0.233853] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[    0.233855] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.233858] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd03fffff]
[    0.233860] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.233863] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.233865] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.233868] pci_bus 0000:02: resource 2 [mem 0xd0500000-0xd06fffff 64bit pref]
[    0.233870] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.233873] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
[    0.233875] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.233878] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.233880] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.233883] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.233885] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.233887] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.233890] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.233892] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.233895] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.233897] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.233900] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff]
[    0.233902] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.233904] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.233907] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.233909] pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff]
[    0.233912] pci_bus 0000:04: resource 18 [mem 0xc0000000-0xf6ffffff]
[    0.233914] pci_bus 0000:04: resource 19 [mem 0xf8000000-0xfed3ffff]
[    0.233917] pci_bus 0000:04: resource 20 [mem 0xfed45000-0xffffffff]
[    0.233949] NET: Registered protocol family 2
[    0.234042] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.234171] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.234807] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.235225] TCP: Hash tables configured (established 131072 bind 65536)
[    0.235269] TCP reno registered
[    0.235307] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.235356] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.235517] NET: Registered protocol family 1
[    0.235567] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.393133] pci 0000:01:05.0: Boot video device
[    0.393147] PCI: CLS 64 bytes, default 64
[    0.393198] Trying to unpack rootfs image as initramfs...
[    0.394145] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    0.395368] Freeing initrd memory: 1332k freed
[    0.396150] Simple Boot Flag at 0x44 set to 0x1
[    0.397900] highmem bounce pool size: 64 pages
[    0.397961] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.402298] VFS: Disk quotas dquot_6.5.2
[    0.402517] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.403626] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.404120] fuse init (API version 7.16)
[    0.404578] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.406146] SGI XFS Quota Management subsystem
[    0.406508] aufs 2.1-standalone.tree-38-rcN-20110131
[    0.406553] msgmni has been set to 1717
[    0.406841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.406886] io scheduler noop registered (default)
[    0.407324] pcieport 0000:00:05.0: setting latency timer to 64
[    0.407353] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[    0.407475] pcieport 0000:00:06.0: setting latency timer to 64
[    0.407497] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.461987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.518331] brd: module loaded
[    0.519646] loop: module loaded
[    0.520894] ahci 0000:00:11.0: version 3.0
[    0.520914] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.521070] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.521115] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    0.521884] scsi0 : ahci
[    0.522282] scsi1 : ahci
[    0.522529] ata1: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408100 irq 19
[    0.522574] ata2: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408180 irq 19
[    0.526921] scsi2 : pata_legacy
[    0.527294] ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    0.982123] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.982190] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.983046] ata1.00: ATA-8: Hitachi HTS725025A9A364, PC2OC72E, max UDMA/100
[    0.983091] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.984197] ata1.00: configured for UDMA/100
[    0.984454] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72502 PC2O PQ: 0 ANSI: 5
[    0.984909] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.985106] sd 0:0:0:0: [sda] Write Protect is off
[    0.985155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.985187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.002708] ata2.00: ATAPI: hp       CDDVDW TS-L633N, 0300, max UDMA/100
[    1.023425] ata2.00: configured for UDMA/100
[    1.027768] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633N  0300 PQ: 0 ANSI: 5
[    1.036278] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.036325] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.036638] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.351459]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.352386] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.353374] scsi3 : pata_legacy
[    1.353614] ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    1.398111] Refined TSC clocksource calibration: 2094.754 MHz.
[    1.398156] Switching to clocksource tsc
[    1.504643] Fusion MPT base driver 3.04.18
[    1.504684] Copyright (c) 1999-2008 LSI Corporation
[    1.504731] Fusion MPT SPI Host driver 3.04.18
[    1.504861] Fusion MPT FC Host driver 3.04.18
[    1.505020] Fusion MPT SAS Host driver 3.04.18
[    1.505194] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.505255] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.505314] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    1.505318] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.505361] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.510120] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[    1.510170] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.510235] ehci_hcd 0000:00:12.2: debug port 1
[    1.510295] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0408600
[    1.516085] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.516414] hub 1-0:1.0: USB hub found
[    1.516455] hub 1-0:1.0: 5 ports detected
[    1.516571] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.516629] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    1.516633] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.516675] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.522115] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[    1.522165] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.522232] ehci_hcd 0000:00:13.2: debug port 1
[    1.522283] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0408500
[    1.528085] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.528413] hub 2-0:1.0: USB hub found
[    1.528453] hub 2-0:1.0: 5 ports detected
[    1.528575] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.528633] ehci_hcd 0000:00:16.2: setting latency timer to 64
[    1.528636] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    1.528678] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.534107] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[    1.534155] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.534221] ehci_hcd 0000:00:16.2: debug port 1
[    1.534272] ehci_hcd 0000:00:16.2: irq 17, io mem 0xd0408400
[    1.540089] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.540438] hub 3-0:1.0: USB hub found
[    1.540479] hub 3-0:1.0: 4 ports detected
[    1.540686] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.540759] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.540819] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    1.540823] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.540866] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.546137] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd0407000
[    1.601382] hub 4-0:1.0: USB hub found
[    1.601429] hub 4-0:1.0: 5 ports detected
[    1.601541] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.601599] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    1.601603] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.601645] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.606129] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0406000
[    1.661378] hub 5-0:1.0: USB hub found
[    1.661425] hub 5-0:1.0: 5 ports detected
[    1.661536] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.661594] ohci_hcd 0000:00:14.5: setting latency timer to 64
[    1.661598] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.661639] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.666121] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd0405000
[    1.721386] hub 6-0:1.0: USB hub found
[    1.721432] hub 6-0:1.0: 2 ports detected
[    1.721540] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.721599] ohci_hcd 0000:00:16.0: setting latency timer to 64
[    1.721603] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.721644] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.726121] ohci_hcd 0000:00:16.0: irq 18, io mem 0xd0404000
[    1.781379] hub 7-0:1.0: USB hub found
[    1.781425] hub 7-0:1.0: 4 ports detected
[    1.781603] uhci_hcd: USB Universal Host Controller Interface driver
[    1.781843] usbcore: registered new interface driver uas
[    1.781882] Initializing USB Mass Storage driver...
[    1.782021] usbcore: registered new interface driver usb-storage
[    1.782061] USB Mass Storage support registered.
[    1.782205] usbcore: registered new interface driver ums-alauda
[    1.782330] usbcore: registered new interface driver ums-cypress
[    1.782471] usbcore: registered new interface driver ums-datafab
[    1.782594] usbcore: registered new interface driver ums-freecom
[    1.782737] usbcore: registered new interface driver ums-isd200
[    1.782861] usbcore: registered new interface driver ums-jumpshot
[    1.783012] usbcore: registered new interface driver ums-karma
[    1.783139] usbcore: registered new interface driver ums-onetouch
[    1.783281] usbcore: registered new interface driver ums-sddr09
[    1.783406] usbcore: registered new interface driver ums-sddr55
[    1.783549] usbcore: registered new interface driver ums-usbat
[    1.790287] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.807107] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.807193] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.808317] device-mapper: uevent: version 1.0.3
[    1.808666] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    1.808852] cpuidle: using governor ladder
[    1.808891] cpuidle: using governor menu
[    1.808988] TCP cubic registered
[    1.809040] NET: Registered protocol family 17
[    1.809085] Registering the dns_resolver key type
[    1.809138] Using IPI No-Shortcut mode
[    1.818116] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.829896] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.843457] md: Waiting for all devices to be available before autodetect
[    1.843502] md: If you don't use raid, use raid=noautodetect
[    1.843818] md: Autodetecting RAID arrays.
[    1.843857] md: Scanned 0 and added 0 devices.
[    1.843895] md: autorun ...
[    1.843932] md: ... autorun DONE.
[    1.843992] RAMDISK: xz image found at block 0
[    1.933786] scsi4 : usb-storage 1-1:1.0
[    2.094214] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    2.094304] Freeing unused kernel memory: 360k freed
[    2.265086] usb 5-2: new full speed USB device using ohci_hcd and address 2
[    2.936738] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[    2.938426] sd 4:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB)
[    2.938987] sd 4:0:0:0: [sdb] Write Protect is off
[    2.938992] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08
[    2.939609] sd 4:0:0:0: [sdb] Asking for cache data failed
[    2.939613] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.941733] sd 4:0:0:0: [sdb] Asking for cache data failed
[    2.941738] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.942480]  sdb: sdb1
[    2.945857] sd 4:0:0:0: [sdb] Asking for cache data failed
[    2.945862] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.945865] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    4.890195] EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
[    6.279669] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.279724] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.279776] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.371250] wmi: Mapper loaded
[    6.387790] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.514329] cfg80211: Calling CRDA to update world regulatory domain
[    6.599428] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 1235
[    6.599434] shpchp 0000:00:01.0: Cannot reserve MMIO region
[    6.599455] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.650732] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.650765] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.650808] r8169 0000:03:00.0: setting latency timer to 64
[    6.650852] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    6.650963] r8169 0000:03:00.0: eth0: RTL8102e at 0xf843c000, c8:0a:a9:84:8e:03, XID 04e00000 IRQ 42
[    6.719582] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    6.719906] ACPI: AC Adapter [ACAD] (on-line)
[    6.728106] [Firmware Bug]: Invalid critical threshold (0)
[    6.735045] thermal LNXTHERM:00: registered as thermal_zone0
[    6.735049] ACPI: Thermal Zone [THRM] (82 C)
[    6.741188] ACPI: acpi_idle registered with cpuidle
[    6.743201] ACPI: processor limited to max C-state 1
[    6.789520] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    6.789529] ACPI: Battery Slot [BAT0] (battery present)
[    6.789650] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    6.789753] ACPI: Power Button [PWRB]
[    6.789826] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    6.791045] ACPI: Lid Switch [LID]
[    6.791137] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.791244] ACPI: Power Button [PWRF]
[    6.793051] acpi device:04: registered as cooling_device2
[    6.793343] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[    6.793515] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.845676] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
[    6.845680] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.903809] input: HP WMI hotkeys as /devices/virtual/input/input5
[    7.010285] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input6
[    7.010494] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2/input0
[    7.020244] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input7
[    7.020434] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-2/input1
[    7.020451] usbcore: registered new interface driver usbhid
[    7.020453] usbhid: USB HID core driver
[    7.027817] Linux agpgart interface v0.103
[    7.163248] mousedev: PS/2 mouse device common for all mice
[    7.170042] rtc_cmos 00:05: RTC can wake from S4
[    7.170307] [drm] Initialized drm 1.1.0 20060810
[    7.173569] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    7.173598] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    7.274164] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.274225] HDA Intel 0000:00:14.2: setting latency timer to 64
[    7.302799] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.302811] ath9k 0000:02:00.0: setting latency timer to 64
[    7.369507] ath: EEPROM regdomain: 0x60
[    7.369510] ath: EEPROM indicates we should expect a direct regpair map
[    7.369514] ath: Country alpha2 being used: 00
[    7.369516] ath: Regpair used: 0x60
[    7.370273] hda_codec: ALC270: BIOS auto-probing.
[    7.377017] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    7.377152] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    7.514596] [drm] radeon defaulting to kernel modesetting.
[    7.514599] [drm] radeon kernel modesetting enabled.
[    7.514677] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.514683] radeon 0000:01:05.0: setting latency timer to 64
[    7.516506] [drm] initializing kernel modesetting (RS880 0x1002:0x9712).
[    7.516560] [drm] register mmio base: 0xD0300000
[    7.516562] [drm] register mmio size: 65536
[    7.521936] ATOM BIOS: HP_JoYaHeWi
[    7.521961] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[    7.521965] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[    7.522154] [drm] Detected VRAM RAM=256M, BAR=256M
[    7.522158] [drm] RAM width 32bits DDR
[    7.522216] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    7.522409] Registered led device: ath9k-phy0::radio
[    7.522428] Registered led device: ath9k-phy0::assoc
[    7.522445] Registered led device: ath9k-phy0::tx
[    7.522462] Registered led device: ath9k-phy0::rx
[    7.522667] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8860000, irq=17
[    7.528466] [TTM] Zone  kernel: Available graphics memory: 439822 kiB.
[    7.528470] [TTM] Zone highmem: Available graphics memory: 1424546 kiB.
[    7.528473] [TTM] Initializing pool allocator.
[    7.528493] [drm] radeon: 256M of VRAM memory ready
[    7.528496] [drm] radeon: 512M of GTT memory ready.
[    7.528515] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.528517] [drm] Driver supports precise vblank timestamp query.
[    7.528537] [drm] radeon: irq initialized.
[    7.528540] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    7.529269] [drm] Loading RS780 Microcode
[    7.593839] r600_cp: Failed to load firmware "radeon/R600_rlc.bin"
[    7.593854] [drm:r600_startup] *ERROR* Failed to load firmware!
[    7.593858] radeon 0000:01:05.0: disabling GPU acceleration
[    7.594895] radeon 0000:01:05.0: f2850400 unpin not necessary
[    7.594898] radeon 0000:01:05.0: f2850400 unpin not necessary
[    7.594904] [drm] Enabling audio support
[    7.595198] [drm] Radeon Display Connectors
[    7.595201] [drm] Connector 0:
[    7.595202] [drm]   VGA
[    7.595205] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    7.595207] [drm]   Encoders:
[    7.595209] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.595211] [drm] Connector 1:
[    7.595212] [drm]   LVDS
[    7.595214] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    7.595216] [drm]   Encoders:
[    7.595218] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[    7.595220] [drm] Connector 2:
[    7.595221] [drm]   HDMI-A
[    7.595222] [drm]   HPD1
[    7.595225] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    7.595227] [drm]   Encoders:
[    7.595228] [drm]     DFP1: INTERNAL_UNIPHY
[    7.656546] [drm] radeon: power management initialized
[    7.675423] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[    8.638058] [drm] fb mappable at 0xC0040000
[    8.638062] [drm] vram apper at 0xC0000000
[    8.638064] [drm] size 4325376
[    8.638066] [drm] fb depth is 24
[    8.638067] [drm]    pitch is 5632
[    8.638191] fbcon: radeondrmfb (fb0) is primary device
[    8.675603] Console: switching to colour frame buffer device 170x48
[    8.686963] fb0: radeondrmfb frame buffer device
[    8.686965] drm: registered panic notifier
[    8.686973] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[    8.718639] EXT3-fs: barriers not enabled
[    8.738890] kjournald starting.  Commit interval 5 seconds
[    8.738925] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[    8.739045] EXT3-fs (sda1): using internal journal
[    8.739048] EXT3-fs (sda1): recovery complete
[    8.739052] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    8.912708] EXT3-fs: barriers not enabled
[    8.922412] kjournald starting.  Commit interval 5 seconds
[    8.922458] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
[    8.922593] EXT3-fs (sda5): using internal journal
[    8.922597] EXT3-fs (sda5): recovery complete
[    8.922602] EXT3-fs (sda5): mounted filesystem with ordered data mode
[    8.999861] Adding 1916924k swap on /dev/sda7.  Priority:1 extents:1 across:1916924k 
Sorry guys... I got to go. My girlfriend just casted "get your dirty ass into the shower" on me.
Oh and here is some naked grandpa pictures too.

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5660
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#8 by fanthom » 04 May 2011, 16:38

@issa82
"[drm:r600_startup] *ERROR* Failed to load firmware!"

you have an Ati card and kernel is trying to enable KMS (ati cards needs firmware). Xvesa used in Superfly doesn't use/need KMS so i would suggest adding 'nomodeset' to porteus.cfg in all booting options.
Please add [Solved] to your thread title if the solution was found.

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#9 by Ahau » 04 May 2011, 17:03

Ahh, thank you, fanthom!

I blacklisted nouveau, but forgot about the other KMS drivers.

Sorry, 82issa, and others with ATI boards!
Please take a look at our online documentation, here. Suggestions are welcome!

crashman
Contributor
Contributor
Posts: 118
Joined: 28 Dec 2010, 17:03
Location: Poland

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#10 by crashman » 08 May 2011, 12:06

Hello Ahau

I found problem with fbapnel run in aterm and see:
volume: can't open /dev/mixer
fbpanel: can't start plugin volume
just only hash "plugin volume" in fbpanel configuration file and work now.

pizzar0
White ninja
White ninja
Posts: 28
Joined: 08 May 2011, 22:26
Location: Chritmas Island

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#11 by pizzar0 » 02 Jun 2011, 05:37

May be I'm missing something (probably??) but what exactly is the point of "Superfly"?
Why not just run Slitaz through Linux Live and call it... something. (Took about 2 hours, including creating 400+ modules. It works perfectly fine.)

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#12 by Ahau » 02 Jun 2011, 05:44

thanks, pizzar0!

The main point of Superfly was for me to learn more about linux, and it has served that purpose quite well :)

You're right, running Slitaz this way would be great (better than superfly, unless one was a die-hard slackware fan...and even then...).

The most likely outcome of my experiment is a (far in the future) module of low-RAM applications, for use in conjunction with crashman's "tiny desktop" project. This would allow users to strip all of the modules form porteus except 000, 001, and 002, then install tiny-desktop and superfly-apps (or whatever I choose to call it) and have something that is porteus-compatible that uses under 100MB of RAM.
Please take a look at our online documentation, here. Suggestions are welcome!

Wkb58hot
Ronin
Ronin
Posts: 2
Joined: 13 Aug 2012, 01:51
Location: plymouth in.

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#13 by Wkb58hot » 27 Mar 2013, 01:43

I love porteus superfly. I have found one problem however. I can not seem to get wireless working properly on my ibm r51 laptop with built in wireless.
it recognizes my wireless device i use
ifconfig eth1 up
to get that started. When i type in iwlist scan it shows the networks in my area but i can't seem to get an ip adress. My midori browser never connects is there anything that im not doing that would help.
thankx Wkb

User avatar
Ahau
King of Docs
King of Docs
Posts: 1331
Joined: 28 Dec 2010, 15:18
Distribution: LXDE & Xfce 32/64-bit
Location: USA

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#14 by Ahau » 28 Mar 2013, 15:19

Welcome, Wkb58hot!

I'm glad you like porteus-superfly! As you can see from posts earlier in this thread, I've not really updated or maintained it for the last couple of years.

For your wifi issues: first, I would try booting without saved changes (so none of your previous modifications can influence the test) and running 'pns-tool' from the command line to try setting up your wifi that way. If that fails as well, try running 'psinfo' and post the report on pastebin.com with a link here and I'll take a look.

That said, it's doubtful at this point that I'll resurrect superfly in way similar to what it was. I wasn't very happy with the performance of Xvesa, and I didn't get it small enough to warrant using Xvesa over a more modern X.org server. What is it that you like about it? The openbox/tint2 interface, or does Xvesa actually work better on your hardware than the standard porteus edition?

I could forsee, for example, building an openbox module that would run on standard porteus. That would be more sustainable and have a broader appeal, in my opinion.
Please take a look at our online documentation, here. Suggestions are welcome!

n2prtsusr
White ninja
White ninja
Posts: 14
Joined: 12 Nov 2012, 02:33
Distribution: Porteus 2.1 lxde 130809
Location: us

Re: Porteus Superfly, V 0.2 (pre-alpha) is out!

Post#15 by n2prtsusr » 07 Apr 2013, 23:46

Ahau

Are you thinking of a openbox module for porteus 2.0?

Post Reply