Update the kernel of Porteus v3.1
-
- DEV Team
- Posts: 2109
- Joined: 09 Feb 2013, 09:55
- Distribution: APorteus-FVWM-ja-x86_64.iso
- Location: japan
Re: Update the kernel of Porteus v3.1
@Bogomips
Excuse me for my poor English.
I wanted to express that I was researching a better "kernel configuration" than my offered one.
If you use another one, I am interested it.
But if your own tuning is about NVIDIA, I can't evaluate it.
I don't have a NVIDIA.
Thanks.
Excuse me for my poor English.
I wanted to express that I was researching a better "kernel configuration" than my offered one.
If you use another one, I am interested it.
But if your own tuning is about NVIDIA, I can't evaluate it.
I don't have a NVIDIA.
Thanks.
-
- DEV Team
- Posts: 2109
- Joined: 09 Feb 2013, 09:55
- Distribution: APorteus-FVWM-ja-x86_64.iso
- Location: japan
Re: Update the kernel of Porteus v3.1
Update Kernel version.
[New tool module]
upkernel-4.2.7-noarch-1.xzm
upkernel-4.3.2-noarch-1.xzm
upnkernel-4.3.2-noarch-1.xzm
Please refer to the top article of this thread.
Thanks.
---------------------
mainline: 4.4-rc4 2015-12-06
stable: 4.3.2 2015-12-10
stable: 4.2.7 2015-12-09
longterm: 4.1.14 2015-12-09
longterm: 3.18.24 2015-10-31
[New tool module]
upkernel-4.2.7-noarch-1.xzm
upkernel-4.3.2-noarch-1.xzm
upnkernel-4.3.2-noarch-1.xzm
Please refer to the top article of this thread.
Thanks.
---------------------
mainline: 4.4-rc4 2015-12-06
stable: 4.3.2 2015-12-10
stable: 4.2.7 2015-12-09
longterm: 4.1.14 2015-12-09
longterm: 3.18.24 2015-10-31
-
- DEV Team
- Posts: 2109
- Joined: 09 Feb 2013, 09:55
- Distribution: APorteus-FVWM-ja-x86_64.iso
- Location: japan
Re: Update the kernel of Porteus v3.1
Update Kernel version.
[New tool module]
upkernel-3.18.25-noarch-1.xzm
upkernel-4.2.8-noarch-1.xzm
upkernel-4.3.3-noarch-1.xzm
upnkernel-4.3.3-noarch-1.xzm
Please refer to the top article of this thread.
Thanks.
--------------------------------------
mainline: 4.4-rc5 2015-12-14
stable: 4.3.3 2015-12-15
stable: 4.2.8[EOL] 2015-12-15
longterm: 4.1.15 2015-12-15
longterm: 3.18.25 2015-12-25
[New tool module]
upkernel-3.18.25-noarch-1.xzm
upkernel-4.2.8-noarch-1.xzm
upkernel-4.3.3-noarch-1.xzm
upnkernel-4.3.3-noarch-1.xzm
Please refer to the top article of this thread.
Thanks.
--------------------------------------
mainline: 4.4-rc5 2015-12-14
stable: 4.3.3 2015-12-15
stable: 4.2.8[EOL] 2015-12-15
longterm: 4.1.15 2015-12-15
longterm: 3.18.25 2015-12-25
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Update the kernel of Porteus v3.1
Hi.
I tried the upgrade and got this:
What am I doing wrong??
I tried the upgrade and got this:
Code: Select all
guest@porteus:~$ su
Password:
root@porteus:/home/guest# activate /home/guest/Downloads/upkernel-*.xzm
Updating shared library links: /sbin/ldconfig
/sbin/ldconfig: /usr/lib/libv4lconvert.so.0 is not a symbolic link
/sbin/ldconfig: /usr/lib/libv4l2.so.0 is not a symbolic link
/sbin/ldconfig: /usr/lib/libv4l1.so.0 is not a symbolic link
root@porteus:/home/guest# upkernel /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso
bash: upkernel: command not found
Ed
-
- Full of knowledge
- Posts: 2564
- Joined: 25 Jun 2014, 15:21
- Distribution: 3.2.2 Cinnamon & KDE5
- Location: London
Re: Update the kernel of Porteus v3.1
^ Checked the md5sum?
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
-
- DEV Team
- Posts: 2109
- Joined: 09 Feb 2013, 09:55
- Distribution: APorteus-FVWM-ja-x86_64.iso
- Location: japan
Re: Update the kernel of Porteus v3.1
@Ed_P
I followed your operation depending on Bogomips's advice.
Porteus-LXQT-v3.1-x86_64.iso from the site
http://dl.porteus.org/x86_64/current/Po ... x86_64.iso
upkernel-3.18.25-noarch-1.xzm from the site
http://www.mediafire.com/download/nlboh ... arch-1.xzm
Updated ISO 'UP.Porteus-LXQT-v3.1-x86_64.iso' was gotten.
Thanks.
------------------------------
@Bogomips
Thank you for your advice.
I followed your operation depending on Bogomips's advice.
Porteus-LXQT-v3.1-x86_64.iso from the site
http://dl.porteus.org/x86_64/current/Po ... x86_64.iso
upkernel-3.18.25-noarch-1.xzm from the site
http://www.mediafire.com/download/nlboh ... arch-1.xzm
Code: Select all
% ls -1
Porteus-LXQT-v3.1-x86_64.iso
upkernel-3.18.25-noarch-1.xzm
% md5sum *
92855e540675ba43fcf7c17607b899d2 Porteus-LXQT-v3.1-x86_64.iso
d905a2d98c97160d38efe4c14bce4d9b upkernel-3.18.25-noarch-1.xzm
% su
# activate upkernel-3.18.25-noarch-1.xzm
# upkernel Porteus-LXQT-v3.1-x86_64.iso
# ls -1
Porteus-LXQT-v3.1-x86_64.iso
UP.Porteus-LXQT-v3.1-x86_64.iso
UP.Porteus-LXQT-v3.1-x86_64.iso.md5
upkernel-3.18.25-noarch-1.xzm
Thanks.
------------------------------
@Bogomips
Thank you for your advice.
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Update the kernel of Porteus v3.1
Thanks guys.
I wasn't very clear in what I posted previously. Sorry.
I will redownload the module and try again.
![Friends :friends:](./images/smilies/friends.gif)
I wasn't very clear in what I posted previously. Sorry.
![Sorry :sorry:](./images/smilies/sorry.gif)
Code: Select all
guest@porteus:~$ md5sum /home/guest/Downloads/upkernel*.xzm
fc742b36809568e0a8d93bcb8f812b57 /home/guest/Downloads/upkernel-4.2.8-noarch-1.xzm
guest@porteus:~$
Ed
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Update the kernel of Porteus v3.1
Redownloaded, retried.
Code: Select all
guest@porteus:~$ su
Password:
root@porteus:/home/guest# md5sum /home/guest/Downloads/upkernel-*.xzm
fc742b36809568e0a8d93bcb8f812b57 /home/guest/Downloads/upkernel-4.2.8-noarch-1-B4.xzm
fc742b36809568e0a8d93bcb8f812b57 /home/guest/Downloads/upkernel-4.2.8-noarch-1.xzm
root@porteus:/home/guest# activate /home/guest/Downloads/upkernel-4.2.8-noarch-1.xzm
Updating shared library links: /sbin/ldconfig
/sbin/ldconfig: /usr/lib/libv4lconvert.so.0 is not a symbolic link
/sbin/ldconfig: /usr/lib/libv4l2.so.0 is not a symbolic link
/sbin/ldconfig: /usr/lib/libv4l1.so.0 is not a symbolic link
root@porteus:/home/guest# ls /mnt/sda5/ISOs/Porteus-LXQT-*.iso
/mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso* /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64.iso*
root@porteus:/home/guest# upkernel /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso
bash: upkernel: command not found
root@porteus:/home/guest#
Ed
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Update the kernel of Porteus v3.1
Retried again, this time under Porteus LXQT 3.1.
Previous attempts were run under Porteus RazorQT 3.0.1.
So now the question is:
where's the new .iso file??
Code: Select all
guest@porteus:~$ su
Password:
root@porteus:/home/guest# ls /mnt/sda5/porteus.3.0/Guest/Downloads/upkernel-*.xzm
/bin/ls: cannot access /mnt/sda5/porteus.3.0/Guest/Downloads/upkernel-*.xzm: No such file or directory
root@porteus:/home/guest# ls /mnt/sda5/porteus3.0/Guest/Downloads/upkernel-*.xzm
/mnt/sda5/porteus3.0/Guest/Downloads/upkernel-4.2.8-noarch-1.xzm*
root@porteus:/home/guest# md5sum /mnt/sda5/porteus3.0/Guest/Downloads/upkernel-*.xzm
fc742b36809568e0a8d93bcb8f812b57 /mnt/sda5/porteus3.0/Guest/Downloads/upkernel-4.2.8-noarch-1.xzm
root@porteus:/home/guest# activate /mnt/sda5/porteus3.0/Guest/Downloads/upkernel-*.xzm
Updating shared library links: /sbin/ldconfig
root@porteus:/home/guest# ls /mnt/sda5/ISOs/Porteus-LXQT-*.iso
/mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso* /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64.iso*
root@porteus:/home/guest# upkernel /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso
mount: block device /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso is write-protected, mounting read-only
Setting input-charset to 'UTF-8' from locale.
3.01a16 (x86_64-unknown-linux-gnu)
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/porteus
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/porteus/rootcopy
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/porteus/optional
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/porteus/modules
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/porteus/base
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/boot
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/boot/syslinux
Excluded by match: /tmp/Porteus-LXQT-v3.1-x86_64-nu/boot/syslinux/isolinux.boot
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/boot/docs
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/EFI
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/EFI/BOOT
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/EFI/BOOT/icons
Scanning /tmp/Porteus-LXQT-v3.1-x86_64-nu/EFI/BOOT/drivers_x64
Writing: Initial Padblock Start Block 0
Done with: Initial Padblock Block(s) 16
Writing: Primary Volume Descriptor Start Block 16
Done with: Primary Volume Descriptor Block(s) 1
Writing: Eltorito Volume Descriptor Start Block 17
Size of boot image is 4 sectors -> No emulation
Done with: Eltorito Volume Descriptor Block(s) 1
Writing: Joliet Volume Descriptor Start Block 18
Done with: Joliet Volume Descriptor Block(s) 1
Writing: End Volume Descriptor Start Block 19
Done with: End Volume Descriptor Block(s) 1
Writing: Version block Start Block 20
Done with: Version block Block(s) 1
Writing: Path table Start Block 21
Done with: Path table Block(s) 4
Writing: Joliet path table Start Block 25
Done with: Joliet path table Block(s) 4
Writing: Directory tree Start Block 29
Done with: Directory tree Block(s) 15
Writing: Joliet directory tree Start Block 44
Done with: Joliet directory tree Block(s) 14
Writing: Directory tree cleanup Start Block 58
Done with: Directory tree cleanup Block(s) 0
Writing: Extension record Start Block 58
Done with: Extension record Block(s) 1
Writing: The File(s) Start Block 59
5.23% done, estimate finish Sun Dec 27 00:34:57 2015
10.48% done, estimate finish Sun Dec 27 00:34:57 2015
15.70% done, estimate finish Sun Dec 27 00:34:57 2015
20.94% done, estimate finish Sun Dec 27 00:34:57 2015
26.16% done, estimate finish Sun Dec 27 00:35:00 2015
31.40% done, estimate finish Sun Dec 27 00:35:00 2015
36.63% done, estimate finish Sun Dec 27 00:34:59 2015
41.87% done, estimate finish Sun Dec 27 00:34:59 2015
47.09% done, estimate finish Sun Dec 27 00:34:59 2015
52.33% done, estimate finish Sun Dec 27 00:34:58 2015
57.56% done, estimate finish Sun Dec 27 00:34:58 2015
62.79% done, estimate finish Sun Dec 27 00:34:58 2015
68.01% done, estimate finish Sun Dec 27 00:34:58 2015
73.25% done, estimate finish Sun Dec 27 00:34:58 2015
78.48% done, estimate finish Sun Dec 27 00:34:58 2015
83.72% done, estimate finish Sun Dec 27 00:34:58 2015
88.95% done, estimate finish Sun Dec 27 00:34:58 2015
94.19% done, estimate finish Sun Dec 27 00:34:58 2015
99.42% done, estimate finish Sun Dec 27 00:34:58 2015
Total translation table size: 2048
Total rockridge attributes bytes: 9888
Total directory bytes: 28672
Path table size(bytes): 184
Done with: The File(s) Block(s) 95360
Writing: Ending Padblock Start Block 95419
Done with: Ending Padblock Block(s) 150
Max brk space used 24000
95569 extents written (186 MB)
root@porteus:/home/guest#
So now the question is:
Code: Select all
root@porteus:/home/guest# ls /mnt/sda5/ISOs/Porteus-LXQT-*.iso
/mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso* /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64.iso*
root@porteus:/home/guest# ls /tmp
keyring-6v9iWv/ keyring-PoQIyI/ keyring-burpmp/ qtsingleapp-qlippe-2dfb-3e8=
keyring-8Y4iGd/ keyring-R0mcqX/ keyring-h45O3y/ qtsingleapp-qlippe-2dfb-3e8-lockfile
root@porteus:/home/guest# ls /mnt/sda5/ISOs/*Porteus-LXQT-*.iso
/mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64-nu.iso* /mnt/sda5/ISOs/Porteus-LXQT-v3.1-x86_64.iso*
root@porteus:/home/guest#
Ed
-
- Full of knowledge
- Posts: 2564
- Joined: 25 Jun 2014, 15:21
- Distribution: 3.2.2 Cinnamon & KDE5
- Location: London
Re: Update the kernel of Porteus v3.1
^ Careful reading of the instructions will reveal that ![:wink:](//cdn.jsdelivr.net/emojione/assets/3.1/png/64/1f609.png)
- the iso to be updated be in a directory which has free space twice the size of the iso
- Change directory to directory containing iso
- Upkernel and new iso will be found in said directory
@Ed_P btw might be an idea to use tab completion. It's a mite faster and more compleat (sez i to a windoze man)Ed_P wrote:Code: Select all
root@porteus:/home/guest# activate /home/guest/Downloads/upkernel-*.xzm
![:wink:](http://cdn.jsdelivr.net/emojione/assets/3.1/png/64/1f609.png)
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Update the kernel of Porteus v3.1
Oops. But I found the .iso, it was in the /home/guest/ directory.Bogomips wrote:Change directory to directory containing iso
Ed
-
- Full of knowledge
- Posts: 2564
- Joined: 25 Jun 2014, 15:21
- Distribution: 3.2.2 Cinnamon & KDE5
- Location: London
Re: Update the kernel of Porteus v3.1
Wasn't sure if /home/guest had been checked. Anyway good to know.Ed_P wrote:Oops. But I found the .iso, it was in the /home/guest/ directory.Bogomips wrote:Change directory to directory containing iso
![Smile :)](./images/smilies/smile.gif)
Linux porteus 4.4.0-porteus #3 SMP PREEMPT Sat Jan 23 07:01:55 UTC 2016 i686 AMD Sempron(tm) 140 Processor AuthenticAMD GNU/Linux
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) MemTotal: 901760 kB MemFree: 66752 kB
-
- DEV Team
- Posts: 2109
- Joined: 09 Feb 2013, 09:55
- Distribution: APorteus-FVWM-ja-x86_64.iso
- Location: japan
Re: Update the kernel of Porteus v3.1
@Ed_P
There are 6 commands in "Update the kernel of Porteus V3.1"
'upkernel' and 'upakernel' commands are offered by the 'upkernel-3.18.NN-noarch-N.xzm' module.
'upkernel4' and 'upakernel4' commands are offered by the 'upkernel-4.2.N-noarch-N.xzm' module.
'upkernel4.3' and 'upakernel4.3' commands are offered by the 'upkernel-4.3.N-noarch-N.xzm' module.
Therefore 'upkernel-4.2.8-noarch-1.xzm' does not include an 'upkernel' command.
It includes an 'upkernel4' commnad.
If you will update the kernel of Porteus V3.1 to version 4.2.N by the command that is included in 'upkernel-4.2.N-noarch-N.xzm' module,
you should execute the 'upkernel4' command.
Thanks.
There are 6 commands in "Update the kernel of Porteus V3.1"
'upkernel' and 'upakernel' commands are offered by the 'upkernel-3.18.NN-noarch-N.xzm' module.
'upkernel4' and 'upakernel4' commands are offered by the 'upkernel-4.2.N-noarch-N.xzm' module.
'upkernel4.3' and 'upakernel4.3' commands are offered by the 'upkernel-4.3.N-noarch-N.xzm' module.
Therefore 'upkernel-4.2.8-noarch-1.xzm' does not include an 'upkernel' command.
It includes an 'upkernel4' commnad.
If you will update the kernel of Porteus V3.1 to version 4.2.N by the command that is included in 'upkernel-4.2.N-noarch-N.xzm' module,
you should execute the 'upkernel4' command.
Thanks.
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Update the kernel of Porteus v3.1
neko wrote:you should execute the 'upkernel4' command.
![Shocked :shock:](./images/smilies/shok.gif)
I am using the 4.3 version so let me rerun the update upkernel4.3 and see what I get this time.
Thanks neko
Ed
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Update the kernel of Porteus v3.1
upkernel4.3 did work and updated the kernel to 4.3. But booting the UP LXQT system on my netbook I lost all network connections. And on the new laptop I didn't get that far.
Thanks for your help neko.
![Sad :(](./images/smilies/sad.gif)
Thanks for your help neko.
Ed