Code: Select all
CONFIG_PATA_JMICRON=y
Code: Select all
CONFIG_PATA_JMICRON=y
# modprobe dm_mod
# dmraid -ay
# ls -la /dev/mapper/
Example output:
/dev/mapper/control <- Created by device-mapper; if present, device-mapper is likely functioning
/dev/mapper/sil_aiageicechah <- A RAID set on a Silicon Image SATA RAID controller
/dev/mapper/sil_aiageicechah1 <- First partition on this RAID Set
If there is only one file (/dev/mapper/control), check if your controller chipset module is loaded with lsmod. If it is, then dmraid does not support this controller or there are no RAID sets on the system (check RAID BIOS setup again). If correct, then you may be forced to use software RAID (this means no dual-booted RAID system on this controller).
If your chipset module is NOT loaded, load it now. For example:
# modprobe sata_sil
See /lib/modules/`uname -r`/kernel/drivers/ata/ for available drivers.
Code: Select all
root@porteus:/home/guest# CONFIG_PATA_JMICRON=y
root@porteus:/home/guest# modprobe pata_jmicron
root@porteus:/home/guest# modinfo pata_jmicron
modinfo: ERROR: Module pata_jmicron not found.
root@porteus:/home/guest# ls -la /dev/mapper
total 0
drwxr-xr-x 2 root root 60 Jul 17 04:17 ./
drwxr-xr-x 17 root root 6360 Jul 17 02:59 ../
crw------- 1 root root 10, 236 Jul 17 02:17 control
root@porteus:/home/guest# modprobe dm_mod
root@porteus:/home/guest# dmraid -ay
/dev/sdc: "jmicron" and "hpt37x" formats discovered (using hpt37x)!
ERROR: jmicron: wrong # of devices in RAID set "jmicron_JRAID " [1/2] on /dev/sdd
ERROR: removing inconsistent RAID set "jmicron_JRAID "
ERROR: hpt37x: wrong # of devices in RAID set "hpt37x_bdgfeejafj" [1/2] on /dev/sdc
ERROR: removing inconsistent RAID set "hpt37x_bdgfeejafj"
ERROR: no RAID set found
no raid sets
root@porteus:/home/guest# ls -la /dev/mapper/
total 0
drwxr-xr-x 2 root root 60 Jul 17 04:17 ./
drwxr-xr-x 17 root root 6360 Jul 17 02:59 ../
crw------- 1 root root 10, 236 Jul 17 02:17 control