nvidia-drivers not working with geforce gt 740

New features which should be implemented in Porteus; suggestions are welcome. All questions or problems with testing releases (alpha, beta, or rc) should go in their relevant thread here, rather than the Bug Reports section.
User avatar
mr_hero
Black ninja
Black ninja
Posts: 61
Joined: 10 Jul 2014, 01:33
Distribution: Porteus
Location: germany

nvidia-drivers not working with geforce gt 740

Post#1 by mr_hero » 08 Sep 2017, 11:39

Hi there,

since my ati-hd 4650 is no longer supported by ati and xorg, I finally replaced my old ati a geforce gt 740. Question now: How do I install proprietarty nvidia-drivers? I tried both nvidia-drivers (340.24 and 304.123) from here and placed them in the modules-folder (not at the same time, of course). No matter which driver I chose, I always got the message:

"Xorg failed to start up - deactiuvating proprietary drivers" at bootup. Any suggestions?

donald
Full of knowledge
Full of knowledge
Posts: 1247
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

nvidia-drivers not working with geforce gt 740

Post#2 by donald » 08 Sep 2017, 13:18

Hi mr_hero

Those drivers are for an older porteus/kernel version => wont work
According to nvidia you need a 340.xx driver for the gt 740

Maybe you have luck and this one will work for you (x86_64)
viewtopic.php?p=52388#p52388

good luck
Last edited by donald on 09 Sep 2017, 01:14, edited 1 time in total.

User avatar
mr_hero
Black ninja
Black ninja
Posts: 61
Joined: 10 Jul 2014, 01:33
Distribution: Porteus
Location: germany

nvidia-drivers not working with geforce gt 740

Post#3 by mr_hero » 08 Sep 2017, 14:17

Thank you for your quick and helpful reply! I'm still on porteus 3.0.1 (I think) and can't change the version easily because of the many customizations I made.
Does this mean the 340-driver actually should work with my card?

Edit:
My kernel-version is: 3.13.6-porteus

Edit 2:

It seems the system is still loading the noveau-drivers. This is my Xorg.0.log:

Code: Select all

[    48.229] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    48.229] X Protocol Version 11, Revision 0
[    48.229] Build Operating System: Slackware 14.1 Slackware Linux Project
[    48.229] Current Operating System: Linux porteus 3.13.6-porteus #1 SMP PREEMPT Fri Mar 7 06:53:36 Local time zone must be set--s x86_64
[    48.229] Kernel command line: quiet root=UUID=10bf5e94-4b13-49ed-bece-1d285226b0f6 changes=/porteus zram=30% fsck noauto timezone=Europe/Berlin volume=50% kmap=de,us
[    48.229] Build Date: 11 January 2014  12:01:12PM
[    48.229]  
[    48.229] Current version of pixman: 0.30.2
[    48.229] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    48.229] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    48.230] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep  8 16:38:47 2017
[    48.235] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    48.236] (==) No Layout section.  Using the first Screen section.
[    48.236] (==) No screen section available. Using defaults.
[    48.236] (**) |-->Screen "Default Screen Section" (0)
[    48.236] (**) |   |-->Monitor "<default monitor>"
[    48.236] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    48.236] (==) Automatically adding devices
[    48.236] (==) Automatically enabling devices
[    48.236] (==) Automatically adding GPU devices
[    48.236] (WW) The directory "/usr/share/fonts/local" does not exist.
[    48.236] 	Entry deleted from font path.
[    48.236] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    48.236] 	Entry deleted from font path.
[    48.236] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    48.237] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    48.237] 	Entry deleted from font path.
[    48.237] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    48.237] 	Entry deleted from font path.
[    48.237] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    48.237] 	Entry deleted from font path.
[    48.237] (WW) The directory "/usr/share/fonts/CID" does not exist.
[    48.237] 	Entry deleted from font path.
[    48.237] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[    48.237] 	Entry deleted from font path.
[    48.237] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[    48.237] 	Entry deleted from font path.
[    48.237] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    48.237] 	Entry deleted from font path.
[    48.237] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    48.238] 	Entry deleted from font path.
[    48.238] (WW) The directory "/usr/share/fonts/cyrillic" does not exist.
[    48.238] 	Entry deleted from font path.
[    48.238] (==) FontPath set to:
	
[    48.238] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    48.238] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    48.238] (II) Loader magic: 0x7f7820
[    48.238] (II) Module ABI versions:
[    48.238] 	X.Org ANSI C Emulation: 0.4
[    48.238] 	X.Org Video Driver: 14.1
[    48.238] 	X.Org XInput driver : 19.1
[    48.238] 	X.Org Server Extension : 7.0
[    48.238] (II) xfree86: Adding drm device (/dev/dri/card0)
[    48.243] (--) PCI: (0:1:8:0) 14f1:8800:0070:9601 rev 5, Mem @ 0xf0000000/16777216
[    48.243] (--) PCI:*(0:6:0:0) 10de:0fc8:196e:109a rev 161, Mem @ 0xed000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[    48.243] (II) Open ACPI successful (/var/run/acpid.socket)
[    48.243] Initializing built-in extension Generic Event Extension
[    48.243] Initializing built-in extension SHAPE
[    48.243] Initializing built-in extension MIT-SHM
[    48.243] Initializing built-in extension XInputExtension
[    48.243] Initializing built-in extension XTEST
[    48.243] Initializing built-in extension BIG-REQUESTS
[    48.243] Initializing built-in extension SYNC
[    48.243] Initializing built-in extension XKEYBOARD
[    48.243] Initializing built-in extension XC-MISC
[    48.243] Initializing built-in extension XINERAMA
[    48.243] Initializing built-in extension XFIXES
[    48.243] Initializing built-in extension RENDER
[    48.243] Initializing built-in extension RANDR
[    48.243] Initializing built-in extension COMPOSITE
[    48.243] Initializing built-in extension DAMAGE
[    48.243] Initializing built-in extension MIT-SCREEN-SAVER
[    48.243] Initializing built-in extension DOUBLE-BUFFER
[    48.243] Initializing built-in extension RECORD
[    48.243] Initializing built-in extension DPMS
[    48.243] Initializing built-in extension X-Resource
[    48.243] Initializing built-in extension XVideo
[    48.243] Initializing built-in extension XVideo-MotionCompensation
[    48.243] Initializing built-in extension XFree86-VidModeExtension
[    48.243] Initializing built-in extension XFree86-DGA
[    48.243] Initializing built-in extension XFree86-DRI
[    48.243] Initializing built-in extension DRI2
[    48.243] (II) LoadModule: "glx"
[    48.255] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    48.274] (II) Module glx: vendor="X.Org Foundation"
[    48.274] 	compiled for 1.14.5, module version = 1.0.0
[    48.274] 	ABI class: X.Org Server Extension, version 7.0
[    48.274] (==) AIGLX enabled
[    48.274] Loading extension GLX
[    48.274] (==) Matched nouveau as autoconfigured driver 0
[    48.274] (==) Matched nv as autoconfigured driver 1
[    48.274] (==) Matched nouveau as autoconfigured driver 2
[    48.274] (==) Matched nv as autoconfigured driver 3
[    48.274] (==) Matched vesa as autoconfigured driver 4
[    48.274] (==) Matched modesetting as autoconfigured driver 5
[    48.274] (==) Matched fbdev as autoconfigured driver 6
[    48.274] (==) Assigned the driver to the xf86ConfigLayout
[    48.274] (II) LoadModule: "nouveau"
[    48.279] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    48.287] (II) Module nouveau: vendor="X.Org Foundation"
[    48.287] 	compiled for 1.14.4, module version = 1.0.10
[    48.287] 	Module class: X.Org Video Driver
[    48.288] 	ABI class: X.Org Video Driver, version 14.1
[    48.288] (II) LoadModule: "nv"
[    48.315] (WW) Warning, couldn't open module nv
[    48.315] (II) UnloadModule: "nv"
[    48.315] (II) Unloading nv
[    48.315] (EE) Failed to load module "nv" (module does not exist, 0)
[    48.315] (II) LoadModule: "vesa"
[    48.323] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    48.335] (II) Module vesa: vendor="X.Org Foundation"
[    48.335] 	compiled for 1.14.3, module version = 2.3.3
[    48.335] 	Module class: X.Org Video Driver
[    48.335] 	ABI class: X.Org Video Driver, version 14.1
[    48.335] (II) LoadModule: "modesetting"
[    48.340] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    48.354] (II) Module modesetting: vendor="X.Org Foundation"
[    48.354] 	compiled for 1.14.4, module version = 0.8.1
[    48.354] 	Module class: X.Org Video Driver
[    48.354] 	ABI class: X.Org Video Driver, version 14.1
[    48.354] (II) LoadModule: "fbdev"
[    48.380] (WW) Warning, couldn't open module fbdev
[    48.380] (II) UnloadModule: "fbdev"
[    48.380] (II) Unloading fbdev
[    48.380] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    48.380] (II) NOUVEAU driver 
[    48.380] (II) NOUVEAU driver for NVIDIA chipset families :
[    48.380] 	RIVA TNT        (NV04)
[    48.381] 	RIVA TNT2       (NV05)
[    48.381] 	GeForce 256     (NV10)
[    48.381] 	GeForce 2       (NV11, NV15)
[    48.381] 	GeForce 4MX     (NV17, NV18)
[    48.381] 	GeForce 3       (NV20)
[    48.381] 	GeForce 4Ti     (NV25, NV28)
[    48.381] 	GeForce FX      (NV3x)
[    48.381] 	GeForce 6       (NV4x)
[    48.381] 	GeForce 7       (G7x)
[    48.381] 	GeForce 8       (G8x)
[    48.381] 	GeForce GTX 200 (NVA0)
[    48.381] 	GeForce GTX 400 (NVC0)
[    48.381] (II) VESA: driver for VESA chipsets: vesa
[    48.381] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    48.381] (++) using VT number 7

[    48.383] (II) [drm] nouveau interface version: 1.1.1
[    48.383] (WW) Falling back to old probe method for vesa
[    48.383] (WW) Falling back to old probe method for modesetting
[    48.384] (II) Loading sub module "dri2"
[    48.384] (II) LoadModule: "dri2"
[    48.384] (II) Module "dri2" already built-in
[    48.384] (--) NOUVEAU(0): Chipset: "NVIDIA NVE7"
[    48.384] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    48.384] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    48.384] (==) NOUVEAU(0): RGB weight 888
[    48.384] (==) NOUVEAU(0): Default visual is TrueColor
[    48.384] (==) NOUVEAU(0): Using HW cursor
[    48.384] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    48.384] (==) NOUVEAU(0): Page flipping enabled
[    48.384] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    48.387] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[    48.390] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    48.423] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    48.425] (II) NOUVEAU(0): EDID for output DVI-D-1
[    48.427] (II) NOUVEAU(0): EDID for output HDMI-1
[    48.460] (II) NOUVEAU(0): EDID for output VGA-1
[    48.460] (II) NOUVEAU(0): Manufacturer: GSM  Model: 4b16  Serial#: 15769
[    48.460] (II) NOUVEAU(0): Year: 2006  Week: 10
[    48.460] (II) NOUVEAU(0): EDID Version: 1.3
[    48.460] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    48.460] (II) NOUVEAU(0): Sync:  Separate  Composite  SyncOnGreen
[    48.460] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    48.460] (II) NOUVEAU(0): Gamma: 2.20
[    48.460] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    48.460] (II) NOUVEAU(0): First detailed timing is preferred mode
[    48.460] (II) NOUVEAU(0): redX: 0.647 redY: 0.346   greenX: 0.292 greenY: 0.602
[    48.460] (II) NOUVEAU(0): blueX: 0.149 blueY: 0.130   whiteX: 0.313 whiteY: 0.328
[    48.460] (II) NOUVEAU(0): Supported established timings:
[    48.460] (II) NOUVEAU(0): 720x400@70Hz
[    48.460] (II) NOUVEAU(0): 640x480@60Hz
[    48.460] (II) NOUVEAU(0): 640x480@75Hz
[    48.460] (II) NOUVEAU(0): 800x600@60Hz
[    48.460] (II) NOUVEAU(0): 800x600@75Hz
[    48.460] (II) NOUVEAU(0): 832x624@75Hz
[    48.460] (II) NOUVEAU(0): 1024x768@60Hz
[    48.460] (II) NOUVEAU(0): 1024x768@75Hz
[    48.460] (II) NOUVEAU(0): 1280x1024@75Hz
[    48.460] (II) NOUVEAU(0): 1152x864@75Hz
[    48.460] (II) NOUVEAU(0): Manufacturer's mask: 0
[    48.460] (II) NOUVEAU(0): Supported standard timings:
[    48.460] (II) NOUVEAU(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
[    48.460] (II) NOUVEAU(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
[    48.460] (II) NOUVEAU(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
[    48.460] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    48.461] (II) NOUVEAU(0): Supported detailed timing:
[    48.461] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    48.461] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    48.461] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    48.461] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    48.461] (II) NOUVEAU(0): Monitor name: L1952TQ
[    48.461] (II) NOUVEAU(0): Monitor name: 
[    48.461] (II) NOUVEAU(0): EDID (in hex):
[    48.461] (II) NOUVEAU(0): 	00ffffffffffff001e6d164b993d0000
[    48.461] (II) NOUVEAU(0): 	0a1001036e261e78eaec54a5584a9a26
[    48.461] (II) NOUVEAU(0): 	215054a56b80314f454f614f81800101
[    48.461] (II) NOUVEAU(0): 	010101010101302a009851002a403070
[    48.461] (II) NOUVEAU(0): 	1300782d1100001e000000fd00384b1e
[    48.461] (II) NOUVEAU(0): 	530e000a202020202020000000fc004c
[    48.461] (II) NOUVEAU(0): 	3139353254510a2020202020000000fc
[    48.461] (II) NOUVEAU(0): 	000a20202020202020202020202000be
[    48.461] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    48.461] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    48.461] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    48.461] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    48.461] (II) NOUVEAU(0): Output DVI-D-1 disconnected
[    48.461] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    48.461] (II) NOUVEAU(0): Output VGA-1 connected
[    48.461] (II) NOUVEAU(0): Using exact sizes for initial modes
[    48.461] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[    48.461] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    48.461] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[    48.461] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    48.461] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    48.461] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    48.461] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    48.461] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    48.461] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    48.461] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    48.461] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    48.462] (==) NOUVEAU(0): DPI set to (96, 96)
[    48.462] (II) Loading sub module "fb"
[    48.462] (II) LoadModule: "fb"
[    48.473] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    48.474] (II) Module fb: vendor="X.Org Foundation"
[    48.474] 	compiled for 1.14.5, module version = 1.0.0
[    48.474] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    48.474] (II) Loading sub module "exa"
[    48.474] (II) LoadModule: "exa"
[    48.485] (II) Loading /usr/lib64/xorg/modules/libexa.so
[    48.495] (II) Module exa: vendor="X.Org Foundation"
[    48.495] 	compiled for 1.14.5, module version = 2.6.0
[    48.495] 	ABI class: X.Org Video Driver, version 14.1
[    48.495] (II) Loading sub module "shadowfb"
[    48.495] (II) LoadModule: "shadowfb"
[    48.507] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[    48.520] (II) Module shadowfb: vendor="X.Org Foundation"
[    48.520] 	compiled for 1.14.5, module version = 1.0.0
[    48.520] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    48.520] (II) UnloadModule: "vesa"
[    48.520] (II) Unloading vesa
[    48.520] (II) UnloadModule: "modesetting"
[    48.520] (II) Unloading modesetting
[    48.521] (--) Depth 24 pixmap format is 32 bpp
[    48.524] (II) NOUVEAU(0): Opened GPU channel 0
[    48.525] (II) NOUVEAU(0): [DRI2] Setup complete
[    48.525] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    48.525] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    48.536] (II) EXA(0): Driver allocated offscreen pixmaps
[    48.536] (II) EXA(0): Driver registered support for the following operations:
[    48.536] (II)         Solid
[    48.537] (II)         Copy
[    48.537] (II)         Composite (RENDER acceleration)
[    48.537] (II)         UploadToScreen
[    48.537] (II)         DownloadFromScreen
[    48.537] (==) NOUVEAU(0): Backing store disabled
[    48.537] (==) NOUVEAU(0): Silken mouse enabled
[    48.537] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    48.537] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    48.537] (==) NOUVEAU(0): DPMS enabled
[    48.537] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    48.537] (--) RandR disabled
[    48.730] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    48.730] (II) AIGLX: enabled GLX_INTEL_swap_event
[    48.730] (II) AIGLX: enabled GLX_ARB_create_context
[    48.730] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    48.730] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    48.730] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    48.730] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    48.731] (II) AIGLX: Loaded and initialized nouveau
[    48.731] (II) GLX: Initialized DRI2 GL provider for screen 0
[    48.732] (II) NOUVEAU(0): NVEnterVT is called.
[    48.762] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[    48.762] resize called 1280 1024
[    48.876] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    48.876] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    48.876] (**) Power Button: Applying InputClass "keyboard-all"
[    48.876] (II) LoadModule: "evdev"
[    48.887] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    48.900] (II) Module evdev: vendor="X.Org Foundation"
[    48.900] 	compiled for 1.14.3, module version = 2.8.2
[    48.900] 	Module class: X.Org XInput Driver
[    48.900] 	ABI class: X.Org XInput driver, version 19.1
[    48.900] (II) Using input driver 'evdev' for 'Power Button'
[    48.900] (**) Power Button: always reports core events
[    48.901] (**) evdev: Power Button: Device: "/dev/input/event1"
[    48.901] (--) evdev: Power Button: Vendor 0 Product 0x1
[    48.901] (--) evdev: Power Button: Found keys
[    48.901] (II) evdev: Power Button: Configuring as keyboard
[    48.901] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    48.901] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    48.901] (**) Option "xkb_rules" "evdev"
[    48.901] (**) Option "xkb_model" "pc104"
[    48.901] (**) Option "xkb_layout" "us"
[    48.901] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    48.937] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    48.937] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    48.937] (**) Power Button: Applying InputClass "keyboard-all"
[    48.937] (II) Using input driver 'evdev' for 'Power Button'
[    48.937] (**) Power Button: always reports core events
[    48.937] (**) evdev: Power Button: Device: "/dev/input/event0"
[    48.937] (--) evdev: Power Button: Vendor 0 Product 0x1
[    48.937] (--) evdev: Power Button: Found keys
[    48.937] (II) evdev: Power Button: Configuring as keyboard
[    48.937] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    48.937] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    48.937] (**) Option "xkb_rules" "evdev"
[    48.937] (**) Option "xkb_model" "pc104"
[    48.937] (**) Option "xkb_layout" "us"
[    48.937] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    48.938] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4017 (/dev/input/event14)
[    48.938] (**) Logitech Unifying Device. Wireless PID:4017: Applying InputClass "evdev pointer catchall"
[    48.938] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4017'
[    48.938] (**) Logitech Unifying Device. Wireless PID:4017: always reports core events
[    48.938] (**) evdev: Logitech Unifying Device. Wireless PID:4017: Device: "/dev/input/event14"
[    48.938] (--) evdev: Logitech Unifying Device. Wireless PID:4017: Vendor 0x46d Product 0xc52b
[    48.938] (--) evdev: Logitech Unifying Device. Wireless PID:4017: Found 20 mouse buttons
[    48.938] (--) evdev: Logitech Unifying Device. Wireless PID:4017: Found scroll wheel(s)
[    48.938] (--) evdev: Logitech Unifying Device. Wireless PID:4017: Found relative axes
[    48.938] (--) evdev: Logitech Unifying Device. Wireless PID:4017: Found x and y relative axes
[    48.938] (II) evdev: Logitech Unifying Device. Wireless PID:4017: Configuring as mouse
[    48.938] (II) evdev: Logitech Unifying Device. Wireless PID:4017: Adding scrollwheel support
[    48.938] (**) evdev: Logitech Unifying Device. Wireless PID:4017: YAxisMapping: buttons 4 and 5
[    48.938] (**) evdev: Logitech Unifying Device. Wireless PID:4017: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    48.938] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.2/0003:046D:C52B.0003/input/input16/event14"
[    48.939] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4017" (type: MOUSE, id 8)
[    48.939] (II) evdev: Logitech Unifying Device. Wireless PID:4017: initialized for relative axes.
[    48.939] (**) Logitech Unifying Device. Wireless PID:4017: (accel) keeping acceleration scheme 1
[    48.939] (**) Logitech Unifying Device. Wireless PID:4017: (accel) acceleration profile 0
[    48.939] (**) Logitech Unifying Device. Wireless PID:4017: (accel) acceleration factor: 2.000
[    48.939] (**) Logitech Unifying Device. Wireless PID:4017: (accel) acceleration threshold: 4
[    48.940] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4017 (/dev/input/mouse1)
[    48.940] (II) No input driver specified, ignoring this device.
[    48.940] (II) This device may have been added with another device file.
[    48.940] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event7)
[    48.940] (II) No input driver specified, ignoring this device.
[    48.940] (II) This device may have been added with another device file.
[    48.941] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event6)
[    48.941] (II) No input driver specified, ignoring this device.
[    48.941] (II) This device may have been added with another device file.
[    48.942] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event5)
[    48.942] (II) No input driver specified, ignoring this device.
[    48.942] (II) This device may have been added with another device file.
[    48.942] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event4)
[    48.942] (II) No input driver specified, ignoring this device.
[    48.942] (II) This device may have been added with another device file.
[    48.943] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event11)
[    48.943] (II) No input driver specified, ignoring this device.
[    48.943] (II) This device may have been added with another device file.
[    48.944] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event10)
[    48.944] (II) No input driver specified, ignoring this device.
[    48.944] (II) This device may have been added with another device file.
[    48.944] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event9)
[    48.944] (II) No input driver specified, ignoring this device.
[    48.944] (II) This device may have been added with another device file.
[    48.945] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event8)
[    48.945] (II) No input driver specified, ignoring this device.
[    48.945] (II) This device may have been added with another device file.
[    48.945] (II) config/udev: Adding drm device (/dev/dri/card0)
[    48.946] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[    48.946] (II) No input driver specified, ignoring this device.
[    48.946] (II) This device may have been added with another device file.
[    48.947] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[    48.947] (II) No input driver specified, ignoring this device.
[    48.947] (II) This device may have been added with another device file.
[    48.947] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    48.948] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    48.948] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[    48.948] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    48.948] (**) AT Translated Set 2 keyboard: always reports core events
[    48.948] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    48.948] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    48.948] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    48.948] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    48.948] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    48.948] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    48.948] (**) Option "xkb_rules" "evdev"
[    48.948] (**) Option "xkb_model" "pc104"
[    48.948] (**) Option "xkb_layout" "us"
[    48.948] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    48.949] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event3)
[    48.949] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    48.949] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    48.949] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    48.949] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
[    48.949] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[    48.949] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[    48.949] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[    48.949] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[    48.949] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[    48.949] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[    48.949] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[    48.949] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[    48.949] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    48.949] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event3"
[    48.949] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[    48.949] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[    48.950] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[    48.950] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[    48.950] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[    48.950] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[    48.950] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[    48.950] (II) No input driver specified, ignoring this device.
[    48.950] (II) This device may have been added with another device file.
[    59.345] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19222
[    59.345] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    59.345] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    59.345] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    59.345] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    59.345] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    59.345] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    59.345] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    59.345] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    59.345] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    59.345] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    59.345] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    59.345] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    59.346] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    59.346] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    64.589] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19222
[    64.589] (II) NOUVEAU(0): Using hsync ranges from config file
[    64.589] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    64.589] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    64.589] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    64.589] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    64.589] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    64.627] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19222
[    64.627] (II) NOUVEAU(0): Using hsync ranges from config file
[    64.627] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    64.627] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    64.627] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    64.627] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    64.627] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    70.893] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19222
[    70.893] (II) NOUVEAU(0): Using hsync ranges from config file
[    70.893] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    70.893] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    70.893] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    70.893] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    70.893] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    70.893] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    70.893] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    70.893] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    70.894] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    70.894] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    70.894] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    70.894] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    70.894] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    88.605] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19222
[    88.605] (II) NOUVEAU(0): Using hsync ranges from config file
[    88.605] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    88.605] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    88.605] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    88.605] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    88.605] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    95.091] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19222
[    95.091] (II) NOUVEAU(0): Using hsync ranges from config file
[    95.091] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    95.091] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    95.091] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    95.091] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    95.091] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   105.148] (II) NOUVEAU(0): EDID vendor "GSM", prod id 19222
[   105.148] (II) NOUVEAU(0): Using hsync ranges from config file
[   105.148] (II) NOUVEAU(0): Using vrefresh ranges from config file
[   105.148] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   105.148] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   105.148] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   105.148] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
The module nVidia-340.24-porteus-v3.0.1-x86_64-1ftm.xzm is deactivated after bootup. When I activate it manually there is a blacklist-file in /etc/modprobe.d/ to disable the conflicting nouveau-driver.

So...does this mean porteus is just not activating the nvidia-xzm-module at boot-time?

donald
Full of knowledge
Full of knowledge
Posts: 1247
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

nvidia-drivers not working with geforce gt 740

Post#4 by donald » 08 Sep 2017, 21:05


User avatar
mr_hero
Black ninja
Black ninja
Posts: 61
Joined: 10 Jul 2014, 01:33
Distribution: Porteus
Location: germany

nvidia-drivers not working with geforce gt 740

Post#5 by mr_hero » 08 Sep 2017, 22:34

Thank you. Unfortunately, the 334.21-package (64 bit) from your link leads to the same error. In addition, nvidia-settings doesn't load up and says "segmentation fault". Before (with the 340.24-package) nvidia-settings did start but complained about the non-loaded nvidia-driver. So the program seems to be broken in the 334.21-package.

I tried copying /etc/modprobe.d/nvidia-installer-disable-nouveau.conf from one of the nvidia-packages to /etc/modprobe.d manually. Afterwards, I tried both nvidia-packages (340.24 and 334.21) again. I now get VGA-graphics and the nvidia-driver still won't load.

Edit:

Wait wait wait....let me guess...I need the 340.xx-drivers but they are incompatible with my version of porteus ?! :(

Did I mention the reason for buying a new graphics-card? It's because ATI stopped support for the Radeon HD4650 and Xorg is incompatible with the legacy-drivers. This would mean I now have two graphics cards: One too old and the other too new for my porteus-version. :wall: This is just frustrating...

donald
Full of knowledge
Full of knowledge
Posts: 1247
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

nvidia-drivers not working with geforce gt 740

Post#6 by donald » 09 Sep 2017, 01:11

It's not so easy as one might think

Nvidia drivers -the kernel module- must be compiled against the kernel in use.
The mentioned 340.24 package has been compiled for porteus 3.0.1 = kernel 3.14.15
you are using kernel 3.13.6.
Even if the settings GUI showed up, the kernel module will not get loaded because
of the wrong kernel version.

According to this page:
http://www.nvidia.com/object/unix.html
your card wants a 340.xx driver.

There is no info about 334.21 anymore.
This driver is compiled for the 3.13.6 kernel but seem not to support your card.

The driver package from the post by fulalas
(nvidia-driver-340.98-x86_64-kernel-4.9.xzm)
is compiled for kernel version 4.9 which is porteus 3.2.2

You have 2 options:
a) install porteus 3.2.2 onto an (empty) usb-flash together with this driver.
If it works, stay with it and redo your customizations.

or b)
try to compile the (340.102) nvidia driver in your old system, which may also
not work because of the older Xorg version.
You need the "devel" and "crippled sources" modules to compile the driver.
I'm not sure if they are still available.

How to
How to create a Nvidia driver xzm module
and
Porteus и NVIDIA. Собираем актуальный драйвер для видеокарты

And yes,the nvidia-installer-disable-nouveau.conf is needed to suppress
the nouveau driver.

User avatar
Ed_P
Contributor
Contributor
Posts: 3422
Joined: 06 Feb 2013, 22:12
Distribution: Cinnamon 3.2.2 64-bit ISO
Location: Western NY, USA

nvidia-drivers not working with geforce gt 740

Post#7 by Ed_P » 09 Sep 2017, 04:48

mr_hero If you haven't already you might consider adding the Porteus system 000, 001 & 002 modules found here: http://dl.porteus.org/x86_64/archive/Po ... 0/modules/ to your modules folder to see if they help the problem. And running the Menu's - Administration - Porteus Settings Centre's Porteus Update option.
Ed

neko
DEV Team
DEV Team
Posts: 995
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

nvidia-drivers not working with geforce gt 740

Post#8 by neko » 09 Sep 2017, 07:11

@mr_hero
If you need to update the kernel of Porteus v3.0 ISO,
you can do it easily as follow.

1. preparation
download a tool & an example

Tool:Porteus Kernel Builder
mkKernel-17.09.04-noarch-1.xzm (3.6 M)
http://www.mediafire.com/file/598zlfbo1 ... arch-1.xzm
md5sum: e209c6afebbc67d2bc5863aee4047d4b mkKernel-17.09.04-noarch-1.xzm

Build example:
v4.13.tar.xz (41 M)
http://www.mediafire.com/file/vaiqb2ag3 ... .13.tar.xz
md5sum: 83e3281637bb5631fb181f74f05265ef v4.13.tar.xz

http://www.mediafire.com/file/n5ite2pmp ... .10.tar.xz

2. set directory & execute tool
execute on Porteus environment.

Code: Select all

% cd work
% ls -1
mkKernel-17.09.04-noarch-1.xzm
v4.13.tar.xz
% su
# activate mkKernel-17.09.04-noarch-1.xzm
# xz -dc v4.13.tar.xz | tar -x
# /usr/local/sbin/guimkKernel
GUI 1. set working direcory: "work" as above
GUI 2. select kernel version: 4.13
GUI 3. select ISO whose kernel will be update.
GUI 4. push OK



-----------------------------------
Note:
If you want to update firefox too,
you can do it easily as follow.

1. preparation
download a tool

spm-17.08.30-noarch-1.xzm (1.3 M)
http://www.mediafire.com/file/luh3cq118 ... arch-1.xzm
md5sum: b99041cd784254e17e1d6df39b86c1ba spm-17.08.30-noarch-1.xzm

2. execute tool
execute on Porteus environment.

Code: Select all

% cd work
% ls -1
spm-17.08.30-noarch-1.xzm
% su
# activate spm-17.08.30-noarch-1.xzm
# mkfirefox
# ls -1
004-firefox-en-US-55.0.3-x86_64-1.xzm
spm-17.08.30-noarch-1.xzm

Thanks.

User avatar
mr_hero
Black ninja
Black ninja
Posts: 61
Joined: 10 Jul 2014, 01:33
Distribution: Porteus
Location: germany

nvidia-drivers not working with geforce gt 740

Post#9 by mr_hero » 09 Sep 2017, 12:38

Thank you for the awesome links! Before I try compiling by myself, I want to mention another idea I got meanwhile: I downloaded the newest driver from the nvidia-homepage (NVIDIA-Linux-x86_64-384.69.run). It's an executable file. I also found a tutorial for making a xzm-file here.

Problems:

1) Is it possible with my porteus-version anyway?
2) The tutorial just copies the /mnt/live/memory/changes-folder into a package. This folder is full of stuff on my system -> not a good idea.
3) I remember some old tool...bpkg...or something...which could compile things directly into a package. Not sure where to get it and if it works with the self-executable .run-file from nvidia.

According to the base-modules:
devel-module is present. Crippled sources isn't. The link in the russian tutorial is dead, unfortunately.

My base modules:

Code: Select all

000-kernel.xzm*  003-kde_locales.xzm  07-printing.xzm*
001-core.xzm*    04-firefox.xzm*      08-VirtualBox-5.1.18-porteus-v3.0-x86_64-1prt.xzm
002-xorg.xzm*    05-devel.xzm*
003-kde.xzm*     06-libreoffice.xzm*
Number of modules in the modules-folder: 149 -> Updating porteus (or just the kernel) really is a problem for me.

donald
Full of knowledge
Full of knowledge
Posts: 1247
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

nvidia-drivers not working with geforce gt 740

Post#10 by donald » 09 Sep 2017, 13:21

Hi
--> NVIDIA-Linux-x86_64-384.69.run <--

--> Is it possible with my porteus-version anyway? <--
maybe,maybe not - it depends on which Xorg and kernel version is (still) supported by this driver package.

--> ..This folder is full of stuff on my system..<--
Compiling should be done in always fresh mode ;)
-- nvidia drivers in text mode --
and i use Blaze's script "nvidia.sh" from the tutorial to build a clean xzm.

One more problem:
Do you have the kernel headers module (crippled sources) for your kernel version?
Its not possible to compile nvidia drivers without them - IIRC
(the linked files in the (ru) tutorial wouldn't work anyway (in your case) -- wrong kernel version (4.5.3)

EDIT
I found a list of supported cards by the "nVidia-334.21-porteus-v3.0-x86_64-1ftm.xzm"
package, which has been build for porteus 3.0.
http://www.nvidia.com/download/driverRe ... 3666/en-us

as a last resort you could replace your card with one of these.....- :bad: - i know...

neko
DEV Team
DEV Team
Posts: 995
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

nvidia-drivers not working with geforce gt 740

Post#11 by neko » 09 Sep 2017, 14:53

@donald
I have a question to you.
Already I have the Porteus-XFCE-v3.0-x86_64.iso whose kernel has been updated to 4.13.
Can I build the NVIDIA driver using following crippled_sources-4.13-64bit.xzm ?
If I can do, would you tell me how to do it ?

crippled_sources-4.13-64bit.xzm (19 M)
http://www.mediafire.com/file/sbq2ubtc4 ... -64bit.xzm
md5sum: 4afa13d73573e88cd721476f7725bb6b crippled_sources-4.13-64bit.xzm


Thanks.

donald
Full of knowledge
Full of knowledge
Posts: 1247
Joined: 17 Jun 2013, 13:17
Distribution: Porteus 3.2.2 XFCE 32bit
Location: Germany

nvidia-drivers not working with geforce gt 740

Post#12 by donald » 09 Sep 2017, 16:04

@ neko
Hello neko

Well, that depends on a trial., as usual.
Do you have the matching "devel. xzm" and which nvidia driver?
( the older Xorg version may cause a problem )

It's been a while since I had to build a driver.
Besides the patching I had to do for my driver, I followed strictly Blaze's tutorial.
It's not difficult to understand - the pictures tell the story.

But i have built drivers only for Hardware actually in use.
Until now I haven't build any driver for "not present" Hardware.

1)get the nvidia-*.run
1b) and the blacklist.xzm, nvidia.sh, nvidia.tar.bz2 (from Blaze)
place them somewhere outside of the live system.

2)put devel, crippled sources, blacklist.xzm into the base folder > reboot into text mode

3)start the Midnight Commander (mc) locate (left column) the *run file and nvidia.sh, nvidia.tar.bz2
and copy them into /tmp (right column) > chmod +x *.run and nvidia.sh

4) run the nvidia *.run file -- if successfully finished, run nvidia.sh --
IMPORTANT: check that you have set the right path in nvidia.sh (bottom lines) before running it.
otherwise you will have no module in place.

User avatar
mr_hero
Black ninja
Black ninja
Posts: 61
Joined: 10 Jul 2014, 01:33
Distribution: Porteus
Location: germany

nvidia-drivers not working with geforce gt 740

Post#13 by mr_hero » 09 Sep 2017, 17:39

No, I don't have crippled sources for porteus 3.0 :(

On the porteus-file-server crippled sources are placed in the kernel-folder on porteus 3.2 and later. Earlier versions don't have this folder. BTW, do you know the cheatcode for booting into fresh-porteus in text-mode? I'm booting porteus with grub4dos. When I set-up the menu a long time ago, I didn't implement "always fresh" and "text-mode" in my self-made menu.

neko
DEV Team
DEV Team
Posts: 995
Joined: 09 Feb 2013, 09:55
Distribution: APorteus-FVWM-ja-x86_64.iso
Location: japan

nvidia-drivers not working with geforce gt 740

Post#14 by neko » 10 Sep 2017, 05:06

@donald
Thank you for your reply.

This condition is mismatch against my devel module.
-- Do you have the matching "devel. xzm" and which nvidia driver? --

So, I gave up to build.

I introduced the binary module from Arch and changed the directory placement to match with Slackware.
I changed the kernel version from 4.13 to 4.12.11 of Porteus-XFCE-v3.0-x86_64.iso
in order to match with the Arch nvidia module.

Thanks.

--------------------------
@mr_hero

Here is a tar file that includes kernel 4.12.11 and nvidio module for 64 bit Porteus v3.0.

Pv3.0-Kv4.12.11-N340.102.tar (28 M)
http://www.mediafire.com/file/h13koljbo ... 40.102.tar
md5sum: 054d6ff3057b70916f64819b2907b669 Pv3.0-Kv4.12.11-N340.102.tar

Code: Select all

% tar -tf Pv3.0-Kv4.12.11-N340.102.tar
Pv3.0-Kv4.12.11-N340.102/
Pv3.0-Kv4.12.11-N340.102/vmlinuz
Pv3.0-Kv4.12.11-N340.102/001-nvidia-340xx-340.102-x86_64-17.xzm
Pv3.0-Kv4.12.11-N340.102/000-kernel.xzm
Blacklist of nouveau is commented out to boot without nvidia.
"#blacklist nouveau" of
001-nvidia-340xx-340.102-x86_64-17.xzm@/lib/modprobe.d/nvidia.conf

If you have a time to try, change to "blacklist nouveau".


Thanks.

User avatar
mr_hero
Black ninja
Black ninja
Posts: 61
Joined: 10 Jul 2014, 01:33
Distribution: Porteus
Location: germany

nvidia-drivers not working with geforce gt 740

Post#15 by mr_hero » 12 Sep 2017, 15:19

No luck with new kernel and driver. The graphics card doesn't even get mentioned in the system-logs anymore. It's missing in dmesg and lspci. No messages from X.Org anymore...not even something about the nouveau-driver.

In addition, I get trouble with the number of modules getting loaded at system-startup:

I get plenty of messages like this:

Code: Select all

[   28.416453] REISERFS warning (device loop125): sh-2006 read_super_block: bread failed (dev loop125, block 16, size 4096)
[   28.699115] REISERFS warning (device loop126): sh-2006 read_super_block: bread failed (dev loop126, block 16, size 4096)
[   28.721614] aufs test_add:233:mount[1718]: number of branches exceeded /memory/images/psutils_1.17-27_amd64.xzm
[   28.762665] aufs test_add:233:mount[1729]: number of branches exceeded /memory/images/pulseview-0.2.0-x86_64-1_SBo.xzm
[   28.774377] REISERFS warning (device loop128): sh-2006 read_super_block: bread failed (dev loop128, block 16, size 4096)
[   28.791129] aufs test_add:233:mount[1740]: number of branches exceeded /memory/images/pv-1.6.0-1.x86_64.xzm
[   28.840989] aufs test_add:233:mount[1751]: number of branches exceeded /memory/images/python3-3.3.2-x86_64-1gv.xzm
Also, pathes seem to be lost: I can't run su anymore. I will change back to old kernel now and try to compile drivers myself in fresh-mode.

Anyway, thank you for package and advises.

Post Reply