Epson Perfection 1270 scanner:scanning porteus 3.2

New features which should be implemented in Porteus; suggestions are welcome. All questions or problems with testing releases (alpha, beta, or rc) should go in their relevant thread here, rather than the Bug Reports section.

Epson Perfection 1270 scanner:scanning porteus 3.2

Postby francois » 13 Oct 2016, 17:56

This a post from blaze in the printing module section about the Epson Perfection 1270 scanner:
does not work for me.

I copied firmware esfw3e.bin from Epson Perfection 1270 to /usr/share/sane/snapscan

Opened /etc/sane.d/snapscan.conf

found
Code: Select all
firmware /usr/share/sane/snapscan/your-firmwarefile.bin

replace with
Code: Select all
firmware /usr/share/sane/snapscan/esfw3e.bin

according to a command
Code: Select all
sane-find-scanner

I received this
Code: Select all
found USB scanner (vendor=0x04b8 [EPSON], product=0x0120 [EPSON Scanner]) at libusb:001:002

and I added this to the end of the /etc/sane.d/snapscan.conf file
Code: Select all
# Epson Perfection 1270
usb 0x04b8 0x0120

I turn off and poweron my scanner and checked status of scanner via command
Code: Select all
scanimage -L

I received this
Code: Select all
device `snapscan:libusb:001:005' is a EPSON EPSON Scanner flatbed scanner

Seems all ok.

I tried to run simple-scan, but I don't have success in it.

Code: Select all
root@blaze:~# simple-scan

(simple-scan:2675): Gdk-WARNING **: gdk_window_set_icon_list: icons too large
[snapscan] Scanner warming up - waiting 6 seconds.

** (simple-scan:2675): WARNING **: Unable to start device: Error during device I/O
Error segmentation
root@blaze:~#

Epic fail of my story :)

BTW, VueScan is working for me. But this program is shareware (not free).
Voltaire: Le mieux est l'ennemi du bien.
User avatar
francois
Contributor
Contributor
 
Posts: 4851
Joined: 28 Dec 2010, 15:25
Location: Enfin l'été, le changement climatique attendu: le soleil.
Distribution: kde xfce porteus manjaro kubun

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby francois » 13 Oct 2016, 18:01

Second post of Blaze:

francois wrote:Do you have printing-3.2-lite module and printing-3.2-lite-drivers module?

Yes, I have it and all modules is active.

I've never scanned in Porteus. I decided to try to scan (sporting interest).

Are you able to print?

No, because I threw my printer in the trash :)

francois wrote:Maybe:
http://crunchbang.org/forums/viewtopic.php?id=18403
Code: Select all
chmod a+w /dev/bus/usb/001/002


and/or

panel menu > graphic > simple scan
Then set the preferences to your scanner the epson before scanning

Code: Select all
root@blaze:~# lsusb
Bus 004 Device 001: ID 1d6b:0003 
Bus 003 Device 001: ID 1d6b:0002 
Bus 002 Device 001: ID 1d6b:0003 
Bus 001 Device 004: ID 04b8:0120 
Bus 001 Device 003: ID 046d:c328 
Bus 001 Device 002: ID 0458:003a 
Bus 001 Device 001: ID 1d6b:0002 
root@blaze:~# chmod a+w /dev/bus/usb/001/004
root@blaze:~#

It does not helped me. 1st scan list with artifacts. If I scan a second list, indicator lamp of scanner lights red and scanner goes down.

Image
Image
Image
Voltaire: Le mieux est l'ennemi du bien.
User avatar
francois
Contributor
Contributor
 
Posts: 4851
Joined: 28 Dec 2010, 15:25
Location: Enfin l'été, le changement climatique attendu: le soleil.
Distribution: kde xfce porteus manjaro kubun

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby francois » 13 Oct 2016, 18:04

Can you try with Ahau's 07-printing.xzm 64bit ,I assume that this is the architecture you are using, and report:
http://dl.porteus.org/x86_64/current/modules/

I want to know it is my module or ahau's module. :)
Voltaire: Le mieux est l'ennemi du bien.
User avatar
francois
Contributor
Contributor
 
Posts: 4851
Joined: 28 Dec 2010, 15:25
Location: Enfin l'été, le changement climatique attendu: le soleil.
Distribution: kde xfce porteus manjaro kubun

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby Blaze » 13 Oct 2016, 18:37

I tried Ahau's 07-printing.xzm 64 bit and not had success. The same trouble is still.
Linux porteus 4.11.2-porteus #1 SMP PREEMPT Sat May 20 19:06:02 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
User avatar
Blaze
Moderator
Moderator
 
Posts: 1240
Joined: 28 Dec 2010, 12:31
Location: ☭ Russian Federation, Lipetsk region, Dankov
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby francois » 13 Oct 2016, 22:01

It seems that you have selected the right device.
Code: Select all
oot@blaze:~# chmod a+w /dev/bus/usb/001/004
root@blaze:~#


It seems that you have the right binary file:
https://doc.ubuntu-fr.org/scanner_epson

I will try to search on the net and come back.

Here it is:
http://snapscan.sourceforge.net/
Getting it working now seems to work with xsane, xsane-extra and xsane-common:
https://doc.ubuntu-fr.org/scanner_epson
http://snapscan.sourceforge.net/

Please install xsane-extra and xsane-common from pkgs.org:
https://pkgs.org/ubuntu-16.04/ubuntu-un ... /download/
https://pkgs.org/ubuntu-16.04/ubuntu-un ... /download/

Try both xsane (xscanimage) and simple-scan.

Get the latest version of SANE from the SANE homepage. Development of the SnapScan backend is now done in SANE CVS, so there's no need to download a separate source package for the backend anymore.

To correctly install your scanner, you should
detect your scanner device
machine# tools/find-scanner
find-scanner: found scanner "AGFA SNAPSCAN 310 1.20" at device
/dev/XXXXX
if you want your scanner to be recognized easily, create a link. For SCSI scanners use:
machine# ln -s /dev/XXXXX /dev/scanner
For USB scanners use:
machine# ln -s /dev/XXXXX /dev/usbscanner
you should now scan using xscanimage
machine$ xscanimage
Voltaire: Le mieux est l'ennemi du bien.
User avatar
francois
Contributor
Contributor
 
Posts: 4851
Joined: 28 Dec 2010, 15:25
Location: Enfin l'été, le changement climatique attendu: le soleil.
Distribution: kde xfce porteus manjaro kubun

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby Blaze » 14 Oct 2016, 13:05

francois, thx for your help.
I tried different esfw3e.bin firmware with different md5sum, but I have the same story:
It does not helped me. 1st scan list with artifacts. If I scan a second list, indicator lamp of scanner lights red and scanner goes down.

Image

Image

Image
Linux porteus 4.11.2-porteus #1 SMP PREEMPT Sat May 20 19:06:02 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
User avatar
Blaze
Moderator
Moderator
 
Posts: 1240
Joined: 28 Dec 2010, 12:31
Location: ☭ Russian Federation, Lipetsk region, Dankov
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby francois » 14 Oct 2016, 14:06

Did you install xsane-extra and xsane-common from pkgs.org?

Is there any output with the xsane command?
Voltaire: Le mieux est l'ennemi du bien.
User avatar
francois
Contributor
Contributor
 
Posts: 4851
Joined: 28 Dec 2010, 15:25
Location: Enfin l'été, le changement climatique attendu: le soleil.
Distribution: kde xfce porteus manjaro kubun

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby Blaze » 14 Oct 2016, 20:34

Yes and no :)
Linux porteus 4.11.2-porteus #1 SMP PREEMPT Sat May 20 19:06:02 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
User avatar
Blaze
Moderator
Moderator
 
Posts: 1240
Joined: 28 Dec 2010, 12:31
Location: ☭ Russian Federation, Lipetsk region, Dankov
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby beny » 14 Oct 2016, 20:56

hi blaze but you have installed the epson driver: iscan-bundle-1.0.0.x64.rpm.tar.gz or 32 bit,start from here not ubuntu or a lot of packages that you do not need, seem.i have a brother so i can't help you, but mine work in slackware and arch
beny
Full of knowledge
Full of knowledge
 
Posts: 719
Joined: 02 Jan 2011, 12:33
Location: italy

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby francois » 15 Oct 2016, 10:42

Sorry blaze, my last post was full of errors. The Android phones is playing games on me. I should reread myself.

From the french link I gave xsane-extra and xsane-common and closing instructions is said to make the difference.
Voltaire: Le mieux est l'ennemi du bien.
User avatar
francois
Contributor
Contributor
 
Posts: 4851
Joined: 28 Dec 2010, 15:25
Location: Enfin l'été, le changement climatique attendu: le soleil.
Distribution: kde xfce porteus manjaro kubun

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby Blaze » 15 Oct 2016, 11:00

beny, thanks, but I don't have success
Image
Linux porteus 4.11.2-porteus #1 SMP PREEMPT Sat May 20 19:06:02 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
User avatar
Blaze
Moderator
Moderator
 
Posts: 1240
Joined: 28 Dec 2010, 12:31
Location: ☭ Russian Federation, Lipetsk region, Dankov
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby francois » 15 Oct 2016, 11:25

Maybe you did read me. I repeat anyway. :wink:

From the french link I gave xsane-extra and xsane-common and closing instructions is said to make the difference.

Your scanner would be included in these packages.

But as these are .deb, maybe there are additional dependencies debian type.
Voltaire: Le mieux est l'ennemi du bien.
User avatar
francois
Contributor
Contributor
 
Posts: 4851
Joined: 28 Dec 2010, 15:25
Location: Enfin l'été, le changement climatique attendu: le soleil.
Distribution: kde xfce porteus manjaro kubun

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby Blaze » 15 Oct 2016, 11:55

I don't like way with manual diamonds. For the average users this is not ice.
I and users of course wanted this to work out of the box. It's better way.
Linux porteus 4.11.2-porteus #1 SMP PREEMPT Sat May 20 19:06:02 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
User avatar
Blaze
Moderator
Moderator
 
Posts: 1240
Joined: 28 Dec 2010, 12:31
Location: ☭ Russian Federation, Lipetsk region, Dankov
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby beny » 15 Oct 2016, 18:33

hi blaze click on image link? why you use windows,

The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.

Please try the following:

Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly.
If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted.
Click the Back button to try another link.

HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)

Technical Information (for support personnel)

Go to Microsoft Product Support Services and perform a title search for the words HTTP and 404.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and About Custom Error Messages.
beny
Full of knowledge
Full of knowledge
 
Posts: 719
Joined: 02 Jan 2011, 12:33
Location: italy

Re: Epson Perfection 1270 scanner:scanning porteus 3.2

Postby Blaze » 16 Oct 2016, 07:55

beny, it's not my hosting with pictures.
I uploaded img on another hosting http://savepic.ru/11798448.png

Cheers
Linux porteus 4.11.2-porteus #1 SMP PREEMPT Sat May 20 19:06:02 x86_64 Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
User avatar
Blaze
Moderator
Moderator
 
Posts: 1240
Joined: 28 Dec 2010, 12:31
Location: ☭ Russian Federation, Lipetsk region, Dankov
Distribution: ⟰ Porteus 3.2 Cinnamon x86_64

Next

Return to Development



Who is online

Users browsing this forum: No registered users and 1 guest