Page 15 of 15
printing-3.2 for porteus 3.2
Posted: 24 Jul 2017, 11:37
by amplatfus
Thank you. Sorry, but I pasted wrong version. The correct version that I used when I got the error it was:
07-printing-x86_64-03.02.2017.xzm. I corrected in previous post also.
The strange thing is not at every restart/ shutdown I see this error.
All the best,
amplatfus
printing-3.2 for porteus 3.2
Posted: 24 Jul 2017, 19:54
by Blaze
amplatfus,
Code: Select all
root@porteus:~# ls -l /home/guest/Загрузки/07-printing-i586-03.02.2017/var/log/packages/
итого 740
-rw-r--r-- 1 root root 197969 ноя 16 2016 PyQt5-5.7-i486-1alien
-rw-r--r-- 1 root root 2127 ноя 16 2016 brscan-0.2.4-0.i386
-rw-r--r-- 1 root root 599 ноя 16 2016 brscan-skey-0.2.4-1.i386
-rw-r--r-- 1 root root 1119 ноя 16 2016 brscan2-0.2.5-1.i386
-rw-r--r-- 1 root root 946 ноя 16 2016 brscan3-0.2.11-4.i386
-rw-r--r-- 1 root root 1491 ноя 16 2016 brscan4-0.4.2-1.i386
-rw-r--r-- 1 root root 4893 фев 3 20:53 cndrvcups-common-3.70-1.i386
-rw-r--r-- 1 root root 21733 фев 3 20:55 cndrvcups-ufr2-uk-3.30-1.i386
-rw-r--r-- 1 root root 31497 дек 1 2016 cups-2.1.4-i586-1
-rw-r--r-- 1 root root 1030 ноя 16 2016 cups-bjnp-1.2-i486-1_slonly
-rw-r--r-- 1 root root 5261 ноя 16 2016 cups-filters-1.9.0-i586-2
-rw-r--r-- 1 root root 911 ноя 28 2016 cups-pdf-3.0beta1-i486-1_slonly
-rw-r--r-- 1 root root 4153 дек 1 2016 dbus-python-1.2.4-i586-1
-rw-r--r-- 1 root root 45159 ноя 28 2016 epson-inkjet-printer-escpr-1.6.10-i486-1_SBo
-rw-r--r-- 1 root root 2609 ноя 28 2016 foomatic-db-engine-4.0.12-i486-1_slonly
-rw-r--r-- 1 root root 1501 ноя 16 2016 foomatic-filters-4.0.12-i486-1
-rw-r--r-- 1 root root 30587 ноя 16 2016 ghostscript-9.19-i586-2
-rw-r--r-- 1 root root 4137 ноя 16 2016 ghostscript-fonts-std-8.11-noarch-1
-rw-r--r-- 1 root root 22968 ноя 16 2016 gutenprint-5.2.11-i586-2
-rw-r--r-- 1 root root 80910 ноя 28 2016 hplip-3.16.11-i586-3
-rw-r--r-- 1 root root 2233 ноя 28 2016 hplip-plugin-3.16.10-i586-1_SBo
-rw-r--r-- 1 root root 2419 ноя 16 2016 iscan-2.30.3-1.i686
-rw-r--r-- 1 root root 5147 ноя 16 2016 iscan-data-1.38.0-1.noarch
-rw-r--r-- 1 root root 527 ноя 16 2016 iscan-network-nt-1.1.1-1.i386
-rw-r--r-- 1 root root 580 янв 15 2017 libgimp-2.8.18-alt1.i586
-rw-r--r-- 1 root root 2518 янв 15 2017 libgusb-0.2.9-i586-1_csb
-rw-r--r-- 1 root root 2950 янв 18 2017 libieee1284-0.2.11-i486-3
-rw-r--r-- 1 root root 2617 ноя 16 2016 libnl-1.1.4-i486-1
-rw-r--r-- 1 root root 26057 ноя 16 2016 net-snmp-5.7.3-i586-3
-rw-r--r-- 1 root root 1482 ноя 16 2016 notify-python-0.1.1-i586-5
-rw-r--r-- 1 root root 1247 дек 2 2016 pycairo-1.10.0-i486-1
-rw-r--r-- 1 root root 888 ноя 16 2016 pycups-1.9.73-i586-1
-rw-r--r-- 1 root root 3268 ноя 16 2016 pycurl-7.43.0-i586-1
-rw-r--r-- 1 root root 9945 ноя 16 2016 pygobject-2.28.6-i486-2
-rw-r--r-- 1 root root 34971 дек 1 2016 pygtk-2.24.0-i586-2
-rw-r--r-- 1 root root 2338 ноя 16 2016 qpdf-6.0.0-i586-1
-rw-r--r-- 1 root root 34753 ноя 28 2016 reportlab-3.2.0-i486-1_slonly
-rw-r--r-- 1 root root 18446 янв 15 2017 sane-1.0.25-i586-2
-rw-r--r-- 1 root root 1382 ноя 16 2016 scangearmp2_3.20-1_i386
-rw-r--r-- 1 root root 9700 ноя 16 2016 simple-scan-2.32.0.2-i586-2gv
-rw-r--r-- 1 root root 3613 ноя 16 2016 sip-4.18-i586-1
-rw-r--r-- 1 root root 15089 ноя 16 2016 system-config-printer-1.3.13-i586-2
-rw-r--r-- 1 root root 11479 ноя 16 2016 xsane-0.999-i486-1
root@porteus:~#
try to install
PyQt-4.12-i586-1.txz only and check that this warning is gone.
If not, please install
qt-4.8.7-i586-6.txz yet (I mean both modules
PyQt-4.12-i586-1.txz +
qt-4.8.7-i586-6.txz).
Cheers
printing-3.2 for porteus 3.2
Posted: 25 Jul 2017, 12:30
by amplatfus
Blaze wrote: ↑24 Jul 2017, 19:54
Blaze
Hi,
Thank you @Blaze. After activation of PyQt-4.12-i586-1.txz until now the error disappeared.
All the best,
amplatfus
printing-3.2 for porteus 3.2
Posted: 25 Jul 2017, 17:19
by Blaze
amplatfus, thanks for the information
printing-3.2 for porteus 3.2
Posted: 12 Sep 2017, 00:08
by francois
Hello blaze.
1) Printing xfce with system-config-printer:
Here under xfce, with 07-printing-x86_64-03.02.2017, unable to get system-config-printer without python-2.7.13-x86_64-2_slack14.2. Is this normal?
2) Scanning with brother printer:
2.1 The brother scanner file is installed and libgphoto2-2.5.10-x86_64-1 is installed:
Code: Select all
root@porteus:~# brsaneconfig4 -a name=scanner model=MFC-7860DW ip=192.168.0.107
root@porteus:~# brsaneconfig4 -q | grep scanner
0 scanner "MFC-7860DW" I:192.168.0.107
root@porteus:~#
2.2 Errors running simple-scan and I found libraries on other installation because there is no libgphoto2.so from libgphoto2-2.5.10-x86_64-1:
Code: Select all
root@porteus:~# simple-scan
simple-scan: error while loading shared libraries: libgphoto2.so.6: cannot open shared object file: No such file or directory
root@porteus:~# ln -s /mnt/sda1/usr/lib/x86_64-linux-gnu/libgphoto2.so.6 /usr/lib64/libgphoto2.so.6
root@porteus:~# simple-scan
simple-scan: error while loading shared libraries: libgphoto2_port.so.12: cannot open shared object file: No such file or directory
root@porteus:~# locate libgphoto2_port.so
root@porteus:~# ln -s /mnt/sda1/usr/lib/x86_64-linux-gnu/libgphoto2_port.so.12 /usr/lib64/libgphoto2_port.so.12
root@porteus:~# simple-scan
Simple scan will load, but unable to select brother printer scanner.
Thanks for providing some cues or suggestions.
printing-3.2 for porteus 3.2
Posted: 12 Sep 2017, 17:16
by Blaze
printing-3.2 for porteus 3.2
Posted: 12 Sep 2017, 19:47
by Ed_P
Suggestion: When naming modules with dates put the year before the month and the day after the month.
Why? When one has multiple downloads of similar modules they sort in date sequence easier.
printing-3.2 for porteus 3.2
Posted: 13 Sep 2017, 14:28
by francois
@blaze;
Thanks a lot. I will be trying it this weekend.
printing-3.2 for porteus 3.2
Posted: 26 Sep 2017, 02:05
by francois
@blaze:
Where do you get python-2.7.13-x86_64-2.txz:
Code: Select all
root@porteus:~# usm -g python-2.7
The following items were found.
Choose an number to confirm.
ctrl+c to quit
1) python-2.7.11-x86_64-2.txz
2) python-2.7.13-x86_64-2_slack14.2.txz
#? ^C
root@porteus:~#
and pkgs.org 2.7-11:
https://slackware.pkgs.org/14.2/slackwa ... 2.txz.html
or
2.7.14
http://ftp.slackware.com/pub/slackware/ ... _64-1.txz
No 2.7.13
Thanks
printing-3.2 for porteus 3.2
Posted: 26 Sep 2017, 17:20
by Blaze
In Porteus-current
printing-3.2 for porteus 3.2
Posted: 26 Sep 2017, 23:53
by francois