Porteus Nemesis v3.5 BUG REPORTS
Moderator: M. Eerie
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Porteus Nemesis v3.5 BUG REPORTS
Looking at the changes-exit cheatcode and there seems there is a problem with the changes-exit file not being written (or being nuked) in the /tmp directory. I removed it for now until I can stify it further.
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
Re: Porteus Nemesis v3.5 BUG REPORTS
a BUG for me solved by the following post
Using a modified brokenman script to change to .asoundrc....logout and login proves alsamixer is now able to see the swapped card for those who need it swapped from index=1 to 0
full reboot no change to aplay results so will now need to look for alternatives
Using a modified brokenman script to change to .asoundrc....logout and login proves alsamixer is now able to see the swapped card for those who need it swapped from index=1 to 0
so my .asoundrc has correct contents of#!/bin/bash
# Concept codeblock for rc.M to select non HDMI sound
# card when two controllers/cards are found.
# Author: brokenman
asnd="$HOME/.asoundrc"
pa=/proc/asound
cards=`ls /proc/asound/card[0-9]/id`
if [ `wc -w <<<$cards` -gt 1 ]; then
for a in $cards; do
[ `grep HDMI $a` ] && continue
crd=`cut -d'/' -f4 <<<$a|tr -d [:alpha:]`
cnam=`grep "Codec:" $pa/card${crd}/codec* | awk '{print$NF}'`
cdev=`awk "/$cnam/&&/Device:/" $pa/card${crd}/codec*|tail -n1|awk -F= '{print$NF}'`
done
[ $crd ] && echo "defaults.pcm.card $crd" > $asnd && \
echo "defaults.pcm.device $cdev" >> $asnd && \
echo "defaults.ctl.card $crd" >> $asnd
fi
but speaker-test fails as index has not truly swappeddefaults.pcm.card 1
defaults.pcm.device 1
defaults.ctl.card 1
Code: Select all
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 0/1
Subdevice #0: subdevice #0
Last edited by aus9 on 08 Jan 2016, 00:16, edited 1 time in total.
Re: Porteus Nemesis v3.5 BUG REPORTS
Swap sound index is solved for those who need it
remove all .asoundrc or /etc/asound.conf
use root powers create a file with contents of
save file as (suggestion)
/etc/modprobe.d/index.conf
full reboot to enjoy sound
Please note this is not needed by everyone, but only a suggestion for those who find their index=0 card is hdmi and they want sound to come from the other card (device)
remove all .asoundrc or /etc/asound.conf
use root powers create a file with contents of
change snd_hda_intel to your sound module that needs swappingoptions snd_hda_intel index=1
save file as (suggestion)
/etc/modprobe.d/index.conf
full reboot to enjoy sound
Please note this is not needed by everyone, but only a suggestion for those who find their index=0 card is hdmi and they want sound to come from the other card (device)
- brokenman
- Site Admin
- Posts: 6105
- Joined: 27 Dec 2010, 03:50
- Distribution: Porteus v4 all desktops
- Location: Brazil
Re: Porteus Nemesis v3.5 BUG REPORTS
kde has pulseaudio. As guest, launch pulseaudio from console, then kill it, then start it again. The first run give errors about some missing directories but creates them.
How do i become super user?
Wear your underpants on the outside and put on a cape.
Wear your underpants on the outside and put on a cape.
Re: Porteus Nemesis v3.5 BUG REPORTS
HI
You appear to have some cups files installed but not cups-openrc?
https://wiki.manjaro.org/index.php?titl ... to_systemd
You appear to have some cups files installed but not cups-openrc?
https://wiki.manjaro.org/index.php?titl ... to_systemd
To enable printing support, the cups-openrc package can be installed.
- francois
- Contributor
- Posts: 6435
- Joined: 28 Dec 2010, 14:25
- Distribution: xfce plank porteus nemesis
- Location: Le printemps, le printemps, le printemps... ... l'hiver s'essoufle.
Re: Porteus Nemesis v3.5 BUG REPORTS
@ brokenman:
Thanks finally you are making a Christmas for me.
Octopi might be a better choice than pamac as gui for package manager. On octopi you can set pacaur instead of yaourt as AUR package manager.
Thanks finally you are making a Christmas for me.
Octopi might be a better choice than pamac as gui for package manager. On octopi you can set pacaur instead of yaourt as AUR package manager.
Prendre son temps, profiter de celui qui passe.
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Porteus Nemesis v3.5 BUG REPORTS
Thanks aus9. I tried both, neither worked.aus9 wrote:try cheatcode 1 then 2 if no good
1 load=synaptics_i2c
2 load=synaptics_usb
hmmmm An interesting approach.brokenman wrote:Perhaps you can leave sshd started when the system starts.No. Nothing works except reisub.Then from another machine ssh into the one that doesn't work so you can poke around the logs.Code: Select all
cliexec=/etc/init.d/sshd~start
Code: Select all
sshd guest@XXX.XXX.X.XXX
Enjoy your vacation.I am away tomorrow for a few days drinking caipirinha on the beach.
Ed
Re: Porteus Nemesis v3.5 BUG REPORTS
sorry Ed will look at testing a laptop shortly
@brokenman new bugs for insertion of USB data stick or cd data in PCManFM
on insertion media can be read!
click the eject icon on left hand pane causes PCManFM to immediately close.
Now for the data cd it actually is a bit worse, the eject button works somewhat in that on my tower the tray opens and filemanager closes
but I don't get a chance to remove disc as tray then wants to close again.
Pressing the hardware eject cd button takes two goes before tray stays open.
Not nice for data cd media IMHO
@brokenman new bugs for insertion of USB data stick or cd data in PCManFM
on insertion media can be read!
click the eject icon on left hand pane causes PCManFM to immediately close.
Now for the data cd it actually is a bit worse, the eject button works somewhat in that on my tower the tray opens and filemanager closes
but I don't get a chance to remove disc as tray then wants to close again.
Pressing the hardware eject cd button takes two goes before tray stays open.
Not nice for data cd media IMHO
- Blaze
- DEV Team
- Posts: 3885
- Joined: 28 Dec 2010, 11:31
- Distribution: ⟰ Porteus current ☯ all DEs ☯
- Location: ☭ Russian Federation, Lipetsk region, Dankov
- Contact:
Re: Porteus Nemesis v3.5 BUG REPORTS
aus9, thanks for info. I think it can be done in configs LXDE or xorg (about disable hibernation) without modules and dependencies.
How to disable hibernation in LXDE when i watch online video via adobe flash player?
By default, others partitions will be in /mnt directory.
How to disable hibernation in LXDE when i watch online video via adobe flash player?
I have a suggestion - to show 6 partitions in this sidebar and to give priority for a flash drive (it will be good for mount and umount USB flash drives).It's nice to have them all in the side bar, but some poeple (like me) have 19 partitions.
By default, others partitions will be in /mnt directory.
How to taste (sweet or bitter)? I go skiing - a lot of snow in RussiaI am away tomorrow for a few days drinking caipirinha on the beach.
Last edited by Blaze on 08 Jan 2016, 09:29, edited 1 time in total.
Linux 6.6.11-porteus #1 SMP PREEMPT_DYNAMIC Sun Jan 14 12:07:37 MSK 2024 x86_64 Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz GenuineIntel GNU/Linux
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
MS-7A12 » [AMD/ATI] Navi 23 [Radeon RX 6600] [1002:73ff] (rev c7) » Vengeance LPX 16GB DDR4 K2 3200MHz C16
Re: Porteus Nemesis v3.5 BUG REPORTS
Ed
I have booted up an old Dell laptop D830 via usb stick and surprise without inserting an usb mouse......touchpad works
Howver I am not sure I have a synaptics as the pad in the specs is called
Touch Pad - PS/2 compatible, Track Stick - PS/2 compatible
shows you how little I know about crappy laptops.
anyhow in case people need it here is lsmod beforee I inserted usb mouse
(2) bearing in mind that my pointing device works as is I next try as root'
Not that I know which one will work for you as you already said none of the cheatcodes work so you may need to wait for brokenman or some laptop guru to drop by
I have booted up an old Dell laptop D830 via usb stick and surprise without inserting an usb mouse......touchpad works
Howver I am not sure I have a synaptics as the pad in the specs is called
Touch Pad - PS/2 compatible, Track Stick - PS/2 compatible
shows you how little I know about crappy laptops.
anyhow in case people need it here is lsmod beforee I inserted usb mouse
Code: Select all
guest ~ $ lsmod
Module Size Used by
sha256_ssse3 14728 1
sha256_generic 9024 1 sha256_ssse3
hmac 2176 1
drbg 11904 1
ansi_cprng 2948 0
ctr 2880 2
ccm 5760 2
binfmt_misc 5336 1
wl 6224988 0
arc4 1728 2
iwl3945 37120 0
ppdev 4808 0
dell_wmi 1944 0
iwlegacy 31240 1 iwl3945
snd_hda_codec_idt 35456 1
snd_hda_codec_generic 36032 1 snd_hda_codec_idt
mac80211 235648 2 iwl3945,iwlegacy
dell_laptop 10728 0
snd_hda_intel 16384 0
snd_hda_codec 56896 3 snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel
dcdbas 3832 1 dell_laptop
dell_smm_hwmon 4260 0
coretemp 4740 0
cfg80211 149992 4 wl,iwl3945,iwlegacy,mac80211
tg3 116032 0
input_leds 2432 0
snd_hda_core 21576 4 snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
kvm 210841 0
snd_hwdep 3912 1 snd_hda_codec
ptp 7420 1 tg3
led_class 3016 3 iwlegacy,dell_laptop,input_leds
snd_pcm 50192 3 snd_hda_codec,snd_hda_intel,snd_hda_core
rfkill 10704 3 cfg80211,dell_laptop
pps_core 4852 1 ptp
i915 745824 2
snd_timer 13796 1 snd_pcm
libphy 15808 1 tg3
i2c_i801 9164 0
firmware_class 5256 4 tg3,i915,iwl3945,snd_hda_intel
shpchp 18502 0
intel_agp 8576 0
intel_gtt 9024 3 i915,intel_agp
8250 11720 0
mac_hid 2772 0
parport_pc 20580 0
parport 25072 2 ppdev,parport_pc
wmi 5698 1 dell_wmi
8250_base 15424 1 8250
serial_core 14592 2 8250,8250_base
acpi_cpufreq 5216 1
Code: Select all
root /home/guest # modprobe synaptics_i2c
root /home/guest # lsmod | grep syna*
synaptics_i2c 3331 0
Re: Porteus Nemesis v3.5 BUG REPORTS
laptop seems laggy.. bloddy hell sorry....I am running off an USB stick....I am losing the plot....well the weather is to blame here
http://www.weatherzone.com.au/wa/perth/perth
###########################
I chose wifi connection and it works as expected so good job there!
http://www.weatherzone.com.au/wa/perth/perth
###########################
I chose wifi connection and it works as expected so good job there!
Re: Porteus Nemesis v3.5 BUG REPORTS
is porteus-nemesis-v3.5-kde-x86_64.iso should be 209MB only?
Re: Porteus Nemesis v3.5 BUG REPORTS
Hi brokenman, I'm playing around with porteus-nemesis-v3.5-lxde-x86_64.iso.
I have the same issue of the previous release: I don't have any working mouse (integrated touchpad, USB mouse, touchscreen).
But if I boot in text mode (by adding "3" cheatcode at boot line), loggin into root/toor and sending "startx" command, then LXDE starts and I have a working mouse.
The problem is that starting Porteus in graphic mode in this way, I should have to start manually every service (for example Network Manager, even if I set-up the /config/network file on my USB flash drive).
If you want I can do several tests, outputs for you.
Regarding the new v3.5, I notice a super fast speed at the bootstrap, like it's impossible to read the boot lines Amazing!
Brokenman, thank you for providing these beta ISOs, your work is Always much appreciated!
Regards,
kalo86
I have the same issue of the previous release: I don't have any working mouse (integrated touchpad, USB mouse, touchscreen).
But if I boot in text mode (by adding "3" cheatcode at boot line), loggin into root/toor and sending "startx" command, then LXDE starts and I have a working mouse.
The problem is that starting Porteus in graphic mode in this way, I should have to start manually every service (for example Network Manager, even if I set-up the /config/network file on my USB flash drive).
If you want I can do several tests, outputs for you.
Regarding the new v3.5, I notice a super fast speed at the bootstrap, like it's impossible to read the boot lines Amazing!
Brokenman, thank you for providing these beta ISOs, your work is Always much appreciated!
Regards,
kalo86
- Ed_P
- Contributor
- Posts: 8369
- Joined: 06 Feb 2013, 22:12
- Distribution: Cinnamon 5.01 ISO
- Location: Western NY, USA
Re: Porteus Nemesis v3.5 BUG REPORTS
No apology necessary aus9.aus9 wrote:sorry Ed will look at testing a laptop shortly
A few more testing results:
The new notebook: EFI, grub2 - boots to DE but no mouse / touchpad.
Old netbook: BIOS, grub2 - results in system rebooting.
Old netbook: BIOS, grub4dos - boots to the porteus login prompt.
I've got to review my boot scripts.
Interesting. I will have to try that.kalo86 wrote:I have the same issue of the previous release: I don't have any working mouse (integrated touchpad, USB mouse, touchscreen).
But if I boot in text mode (by adding "3" cheatcode at boot line), loggin into root/toor and sending "startx" command, then LXDE starts and I have a working mouse.
Last edited by Ed_P on 22 Jan 2016, 18:39, edited 1 time in total.
Ed
-
- Full of knowledge
- Posts: 400
- Joined: 02 Jan 2011, 18:41
- Distribution: Porteus 5.0-RC1
- Location: In a hayfield
Re: Porteus Nemesis v3.5 BUG REPORTS
I had this happen too, changed Preferences/Volume Management to "Change folder in the tab to Home Folder"...works here.aus9 wrote:sorry Ed will look at testing a laptop shortly
@brokenman new bugs for insertion of USB data stick or cd data in PCManFM
on insertion media can be read!
click the eject icon on left hand pane causes PCManFM to immediately close.