Page 1 of 2
[SOLVED] pacman/pman --feedback do not attempt
Posted: 08 Nov 2015, 06:08
by aus9
EDIT subject to remove pamac
WARNING I do not know what I am doing so do not attempt.
I am aware that we may have some modules built for us etc and am aware that ArchLinux is normally a rolling release.
I started with trying to find pamac (and mtpaint) as mentioned by francois. here is my journey
feel free to comment or not...commands are root
Code: Select all
pacman -Sy
pacman -Qk
pacman -Su ( not proceeded---abort)
#####################################################################
pacman -S mtpaint
resolving dependencies...
looking for conflicting packages...
Packages (1) mtpaint-3.40-15
Total Download Size: 0.47 MiB
Total Installed Size: 1.56 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
mtpaint-3.40-15-x86_64 480.5 KiB 312K/s 00:02 [################################################] 100%
(1/1) checking keys in keyring [################################################] 100%
warning: Public keyring not found; have you run 'pacman-key --init'?
downloading required keys...
error: key "FCF3C8CB5CF9C8D4" could not be looked up remotely
error: required key missing from keyring
error: failed to commit transaction (could not find or read file)
Errors occurred, no packages were upgraded.
#########################################################################################
pacman-key --init
gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
gpg: no ultimately trusted keys found
gpg: starting migration from earlier GnuPG versions
gpg: porting secret keys from '/etc/pacman.d/gnupg/secring.gpg' to gpg-agent
gpg: migration succeeded
gpg: Generating pacman keyring master key...
gpg: key 4DCACEFC marked as ultimately trusted
gpg: directory '/etc/pacman.d/gnupg/openpgp-revocs.d' created
gpg: Done
==> Updating trust database...
gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
######################################################################
pacman -S pamac
error: target not found: pamac
#######################################################################
pacman -S mtpaint
resolving dependencies...
looking for conflicting packages...
Packages (1) mtpaint-3.40-15
Total Download Size: 0.47 MiB
Total Installed Size: 1.56 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
mtpaint-3.40-15-x86_64 480.5 KiB 312K/s 00:02 [################################################] 100%
(1/1) checking keys in keyring [################################################] 100%
warning: Public keyring not found; have you run 'pacman-key --init'?
downloading required keys...
error: key "FCF3C8CB5CF9C8D4" could not be looked up remotely
error: required key missing from keyring
error: failed to commit transaction (could not find or read file)
Errors occurred, no packages were upgraded.
####################################################################################3
# pacman-key --init
gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
gpg: no ultimately trusted keys found
gpg: starting migration from earlier GnuPG versions
gpg: porting secret keys from '/etc/pacman.d/gnupg/secring.gpg' to gpg-agent
gpg: migration succeeded
gpg: Generating pacman keyring master key...
gpg: key 4DCACEFC marked as ultimately trusted
gpg: directory '/etc/pacman.d/gnupg/openpgp-revocs.d' created
gpg: Done
==> Updating trust database...
gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
Re: pacman/pamac --feedback do not attempt
Posted: 09 Nov 2015, 05:34
by francois
1.0 The story seems to say that you installed mpaint, is it the case?
2,0 Concerning pamac I have tried to do it thru pacaur which is a wrapper for pacman and for aur but was not able to get it thru. pamac is a package build available in AUR with the name pamac-aur. You have to build it:
https://wiki.archlinux.org/index.php/AUR_helpers
Pacman manages official binaries, whereas pacaur will manage both binaries of pacman and of package build of AUR. AUR are packages maintained by the community and not already accepted as binaries. yaourt is another way of building AUR packages.
You can try to buil a gui interface for pacman if you want:
https://aur.archlinux.org/packages/tkpacman/
Make sure you have the prerequisite libraries.
Re: pacman/pamac --feedback do not attempt
Posted: 09 Nov 2015, 07:20
by aus9
The story seems to say that you installed mpaint, is it the case?
No it failed see the gpg errors.
However, under /var/cache/pacman/pkg I do have a mtpaint * .tar.xz download.
I am reluctant to try and move the bits into a xzm until I resolve the gpg error.
to my eyesight, my first attempt to download it says run the pacman-key --init command
then when I repeat the mtpaint command it keeps on borking the
downloading required keys...
error: key "FCF3C8CB5CF9C8D4" could not be looked up remotely
what is misleading you that mtpaint is installed is the message that
Errors occurred, no packages were upgraded.
tricking you into thinking its installed and not upgrading whereas, its not installed to begin with.
2) so going to etc/pacman.d/gnupg
I deleted all the keys and was able to start again and repeat all the commands and end up with the same error.
Re: pacman/pamac --feedback do not attempt
Posted: 09 Nov 2015, 09:24
by aus9
OK I forgot I disabled my router filter for port 11371 for keys now lets try again
Code: Select all
pacman -S mtpaint
(snip)downloading required keys...
:: Import PGP key 2048R/962855F072C7A01846405864FCF3C8CB5CF9C8D4, "Alexander R��dseth <rodseth@gmail.com>", created: 2011-09-29? [Y/n] y
File /var/cache/pacman/pkg/mtpaint-3.40-15-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded
OK lets try it manually
Code: Select all
gpg --keyserver hkp://pool.sks-keyservers.net --recv-key 962855F072C7A01846405864FCF3C8CB5CF9C8D4
gpg: /root/.gnupg/trustdb.gpg: trustdb created
gpg: key 5CF9C8D4: public key "Alexander R�dseth <rodseth@gmail.com>" imported
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg: imported: 1
repeating mtpaint command still gives corrupt errors for the download.....OK manually delete /var/cache/pacman/pkg/mtpaint-3.40-15-x86_64.pkg.tar.xz
and lets start again.
Code: Select all
pacman -S mtpaint
resolving dependencies...
looking for conflicting packages...
Packages (1) mtpaint-3.40-15
Total Download Size: 0.47 MiB
Total Installed Size: 1.56 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
mtpaint-3.40-15-x86_64 480.5 KiB 312K/s 00:02 [################################################] 100%
(1/1) checking keys in keyring [################################################] 100%
(1/1) checking package integrity [################################################] 100%
error: mtpaint: signature from "Alexander R��dseth <rodseth@gmail.com>" is unknown trust
:: File /var/cache/pacman/pkg/mtpaint-3.40-15-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] n
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I may be wrong but gpg does not seem to accept my import key command for mtpaint manually or thru pacman
I can't get past this error
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Re: pacman/pamac --feedback do not attempt
Posted: 09 Nov 2015, 12:29
by ncmprhnsbl
run 'setup-pman' and that should sort all this(gpg keys) out for you (apart from the pacman-db-upgrade part) and make a module for you..
Re: pacman/pamac --feedback do not attempt
Posted: 09 Nov 2015, 22:42
by aus9
@ncmprhnsbl
Thankyou, that made a huge difference. If you have the time I just need to resolve the module issue before I can mark this as solved
Code: Select all
setup-pman
snip
/tmp/pacman-settings.xzm was moved to your modules directory
###############################################
pacman -S mtpaint
resolving dependencies...
looking for conflicting packages...
Packages (1) mtpaint-3.40-15
Total Download Size: 0.47 MiB
Total Installed Size: 1.56 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
mtpaint-3.40-15-x86_64 480.5 KiB 315K/s 00:02 [################################################] 100%
(1/1) checking keys in keyring [################################################] 100%
(1/1) checking package integrity [################################################] 100%
(1/1) loading package files [################################################] 100%
(1/1) checking for file conflicts [################################################] 100%
(1/1) checking available disk space [################################################] 100%
(1/1) installing mtpaint [################################################] 100%
Optional dependencies for mtpaint
gifsicle: for exporting GIF files from mtPaint
Its not automaticaly moving any modules to my modules folder but my config/modules has there 2 lines
Move2ModuleDir=yes
ModuleDirectory=/mnt/sda3/nemesis/modules
When I did a search
Code: Select all
find / -name mtpaint*xzm
/mnt/sda3/porteus/modules/mtpaint-3.40-x86_64-bundle.xzm
find / -name mtpaint
/mnt/sda3/nemesis/changes/usr/bin/mtpaint
/mnt/live/memory/changes/usr/bin/mtpaint
/usr/bin/mtpaint
to my eyesight and understanding it appears to be doing a live injection AKA install and not creating a module?
##############################################
seeing your setup* suggestion I also ran
setup-config-pman
but that appears to be the same as the config/modules file
I did make one change and full reboot
RemovePkg=no
but no detected XZMs
Re: pacman/pamac --feedback do not attempt
Posted: 10 Nov 2015, 00:32
by ncmprhnsbl
this is because you have used pacman which doesnt make modules... (which would be ok if using changes)
use pman wrapper instead:
Re: pacman/pamac --feedback do not attempt
Posted: 10 Nov 2015, 01:08
by francois
@aus9:
pamac is not available on AUR;
Code: Select all
guest /root $ yaourt -S pamac --insecure
[sudo] password for guest:
error: target not found: pamac
guest /root $
octopi is an intersting alternative used on manjaro:
https://wiki.manjaro.org/index.php?title=Octopi
Code: Select all
guest /root $ yaourt -S octopi --insecure
==> Downloading octopi PKGBUILD from AUR...
x .SRCINFO
x PKGBUILD
x enable-kstatus.patch
x octopi-repoeditor.desktop
x octopi.install
acidicX commented on 2015-09-27 10:54
aura also says octopi-notifier-kde and octopi-notifier are in conflict, is there a way to resolve this?
ImNtReal commented on 2015-09-28 13:47
This is why I created octopi-notifier-qt4 as a separate package originally. I think I might try that, again.
kikadf commented on 2015-09-28 14:27
@acidicX, after build, aura saves somewhere the builded binaries?
yaourt saved those in /tmp/yaourt-tmp-$USER/
After build, just cd /tmp/yaourt-tmp-$USER/ pacman -U "wanted binaries"
You can install only one octopi-notifier (default or kde version).
FiyreWyrkz commented on 2015-10-21 19:53
It has been commented previously, however, I shall mention again. This package should likely only provide one of the octopi-notifier packages as there becomes a conflicting issue when trying to build and install the entire package.
Would seem logical to separate the plasma 4 stuff.
pkgname=('octopi' 'octopi-notifier' 'octopi-notifier-kde4' 'octopi-repoeditor' 'octopi-cachecleaner')
package_octopi-notifier() {...
conflicts=('octopi-notifier-qt4' 'octopi-notifier-kde' 'octopi-notifier-kde4')
...
package_octopi-notifier-kde4() ...
conflicts=('octopi-notifier' 'octopi-notifier-kde')
...
AnAkkk commented on 2015-10-28 00:02
When using octopi-notifier on Plasma 5 and when there are updates available, plasmashell CPU usage keeps increasing over time and goes to 100% for some reason. Killing octopi-notifier solves it, and starting it again makes plasmashell goes back to 100%.
octopi 0.8.0-1 (2015-11-09 14:08)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> WARNING: This PKGBUILD describes a split package.
==> Specific package options are unknown
==> octopi dependencies:
- qt5-declarative (already installed) [makedepend]
- libnotify (already installed) [makedepend]
- knotifications (package found) [makedepend]
==> Continue building octopi ? [Y/n]
==> --------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for octopi:
[sudo] password for guest:
resolving dependencies...
:: There are 2 providers available for phonon-qt5-backend:
:: Repository extra
1) phonon-qt5-gstreamer 2) phonon-qt5-vlc
Enter a number (default=1): 1
looking for conflicting packages...
Packages (15) cdparanoia-10.2-5 gamin-0.1.10-8 gst-plugins-base-1.6.1-1
gst-plugins-base-libs-1.6.1-1 gstreamer-1.6.1-1
kcodecs-5.15.0-1 kconfig-5.15.0-1 kcoreaddons-5.15.0-1
kwindowsystem-5.15.0-1 libdbusmenu-qt5-0.9.3+15.10.20150604-1
libvisual-0.4.0-6 phonon-qt5-4.8.3-2
phonon-qt5-gstreamer-4.8.2-1 qt5-x11extras-5.5.1-3
knotifications-5.15.0-1
Total Download Size: 5.28 MiB
Total Installed Size: 36.13 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
gstreamer-1.6.1-1-x... 1776.5 KiB 2.36M/s 00:01 [######################] 100%
gst-plugins-base-li... 1560.5 KiB 1680K/s 00:01 [######################] 100%
cdparanoia-10.2-5-x... 64.9 KiB 618K/s 00:00 [######################] 100%
libvisual-0.4.0-6-x... 121.8 KiB 771K/s 00:00 [######################] 100%
gst-plugins-base-1.... 170.0 KiB 881K/s 00:00 [######################] 100%
phonon-qt5-gstreame... 103.7 KiB 757K/s 00:00 [######################] 100%
phonon-qt5-4.8.3-2-... 256.6 KiB 812K/s 00:00 [######################] 100%
libdbusmenu-qt5-0.9... 160.5 KiB 747K/s 00:00 [######################] 100%
qt5-x11extras-5.5.1... 10.6 KiB 0.00B/s 00:00 [######################] 100%
kwindowsystem-5.15.... 172.9 KiB 924K/s 00:00 [######################] 100%
kconfig-5.15.0-1-x86_64 306.3 KiB 738K/s 00:00 [######################] 100%
kcodecs-5.15.0-1-x86_64 159.0 KiB 743K/s 00:00 [######################] 100%
gamin-0.1.10-8-x86_64 43.1 KiB 756K/s 00:00 [######################] 100%
kcoreaddons-5.15.0-... 362.9 KiB 1040K/s 00:00 [######################] 100%
knotifications-5.15... 136.9 KiB 744K/s 00:00 [######################] 100%
(15/15) checking keys in keyring [######################] 100%
(15/15) checking package integrity [######################] 100%
(15/15) loading package files [######################] 100%
(15/15) checking for file conflicts [######################] 100%
error: failed to commit transaction (conflicting files)
cdparanoia: /usr/bin/cdparanoia exists in filesystem
cdparanoia: /usr/lib/libcdda_interface.so exists in filesystem
cdparanoia: /usr/lib/libcdda_interface.so.0 exists in filesystem
cdparanoia: /usr/lib/libcdda_interface.so.0.10.2 exists in filesystem
cdparanoia: /usr/lib/libcdda_paranoia.so exists in filesystem
cdparanoia: /usr/lib/libcdda_paranoia.so.0 exists in filesystem
cdparanoia: /usr/lib/libcdda_paranoia.so.0.10.2 exists in filesystem
libvisual: /usr/lib/libvisual-0.4.so exists in filesystem
libvisual: /usr/lib/libvisual-0.4.so.0 exists in filesystem
libvisual: /usr/lib/libvisual-0.4.so.0.0.0 exists in filesystem
libvisual: /usr/lib/pkgconfig/libvisual-0.4.pc exists in filesystem
libvisual: /usr/share/locale/es_AR/LC_MESSAGES/libvisual-0.4.mo exists in filesystem
libvisual: /usr/share/locale/es_ES/LC_MESSAGES/libvisual-0.4.mo exists in filesystem
Errors occurred, no packages were upgraded.
==> Restart building octopi ? [y/N]
==> -------------------------------
==>
guest /root $ yaourt -S pamac --insecure
[sudo] password for guest:
error: target not
There isa problem with conflicting packages.
Re: pacman/pamac --feedback do not attempt
Posted: 10 Nov 2015, 02:22
by aus9
@francois
OK I will still pursue a gui maybe in a separate post. This one is still not resolved
@ncmprhnsbl
So I tried this ...all root commands
Code: Select all
pman -S mtpaint
warning: mtpaint-3.40-15 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) mtpaint-3.40-15
Total Installed Size: 1.56 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring [################################################] 100%
(1/1) checking package integrity [################################################] 100%
(1/1) loading package files [################################################] 100%
(1/1) checking for file conflicts [################################################] 100%
(1/1) checking available disk space [################################################] 100%
(1/1) reinstalling mtpaint [################################################] 100%
root /home/guest # umount /mnt/sda1
root /home/guest # find / -name mtpaint*xzm
/mnt/sda3/porteus/modules/mtpaint-3.40-x86_64-bundle.xzm
no module for nemesis appears to be created?
attempt 2
##########
Code: Select all
pman -R mtpaint
checking dependencies...
Packages (1) mtpaint-3.40-15
Total Removed Size: 1.56 MiB
:: Do you want to remove these packages? [Y/n] y
(1/1) removing mtpaint
pman -S mtpaint
(same as above )
find / -name mtpaint*xzm
/mnt/sda3/porteus/modules/mtpaint-3.40-x86_64-bundle.xzm
Re: pacman/pman --feedback do not attempt
Posted: 10 Nov 2015, 06:31
by ncmprhnsbl
@francois
-Ss = search
Code: Select all
guest ~ $ yaourt -Ss --insecure pamac
aur/pamac-aur 2.4.3-3 (46)
A Gtk3 frontend for libalpm
aur/pamac-patched-headerbar 2.4.3-2 (0)
A Gtk3 frontend for libalpm, patched by me to use GtkHeaderBar to match
GNOME
@aus9 are you using changes cheatcode? i'm not sure if brokenman made it so module isnt created when using changes?
heres how it should look: (without 'changes=' cheatcode)
Code: Select all
root / # pacman-db-upgrade
==> Pre-4.2 database format detected - upgrading...
root / # pman -S mtpaint
resolving dependencies...
looking for conflicting packages...
Packages (1) mtpaint-3.40-15
Total Download Size: 0.47 MiB
Total Installed Size: 1.56 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
mtpaint-3.40-15-x86_64 480.5 KiB 13.8K/s 00:35 [######################] 100%
(1/1) checking keys in keyring [######################] 100%
(1/1) checking package integrity [######################] 100%
(1/1) loading package files [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) checking available disk space [######################] 100%
(1/1) installing mtpaint [######################] 100%
Optional dependencies for mtpaint
gifsicle: for exporting GIF files from mtPaint
Decompressing mtpaint-3.40-15-x86_64.pkg.tar.xz
Stripping mtpaint-3.40-15-x86_64.pkg.tar.xz
Size before strip:
1.7M
Size after strip:
1.7M
Parallel mksquashfs: Using 2 processors
Creating 4.0 filesystem on /tmp/mtpaint-3.40-15-x86_64.pkg.xzm, block size 262144.
[=================================================================\] 28/28 100%
Exportable Squashfs 4.0 filesystem, xz compressed, data block size 262144
compressed data, compressed metadata, compressed fragments, compressed xattrs
duplicates are removed
Filesystem size 507.35 Kbytes (0.50 Mbytes)
31.56% of uncompressed filesystem size (1607.78 Kbytes)
Inode table size 618 bytes (0.60 Kbytes)
24.94% of uncompressed inode table size (2478 bytes)
Directory table size 590 bytes (0.58 Kbytes)
33.13% of uncompressed directory table size (1781 bytes)
Number of duplicate files found 0
Number of inodes 77
Number of files 26
Number of fragments 4
Number of symbolic links 0
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 51
Number of ids (unique uids + gids) 1
Number of uids 1
root (0)
Number of gids 1
root (0)
Operation completed successfully.
The following modules were copied to your modules folder:
/mnt/sdb1/nemesis/modules
mtpaint-3.40-15-x86_64.pkg.xzm
Packages were removed from /var/cache/pacman/pkg.
Re: pacman/pman --feedback do not attempt
Posted: 10 Nov 2015, 09:06
by aus9
@aus9 are you using changes cheatcode?
Yes and did not realize that changes cheatcode was seen by some as being not recommended?
OK lets go, booted up with nochanges bootcode and commands as root
Code: Select all
pacman-db-upgrade
==> Pre-4.2 database format detected - upgrading...
pman -S mtpaint
resolving dependencies...
looking for conflicting packages...
Packages (1) mtpaint-3.40-15
Total Download Size: 0.47 MiB
Total Installed Size: 1.56 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
mtpaint-3.40-15-x86_64 480.5 KiB 313K/s 00:02 [###########################################] 100%
(1/1) checking keys in keyring [###########################################] 100%
(1/1) checking package integrity [###########################################] 100%
(1/1) loading package files [###########################################] 100%
(1/1) checking for file conflicts [###########################################] 100%
(1/1) checking available disk space [###########################################] 100%
(1/1) installing mtpaint [###########################################] 100%
Optional dependencies for mtpaint
gifsicle: for exporting GIF files from mtPaint
Decompressing mtpaint-3.40-15-x86_64.pkg.tar.xz
Stripping mtpaint-3.40-15-x86_64.pkg.tar.xz
Size before strip:
1.7M
Size after strip:
1.7M
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /tmp/mtpaint-3.40-15-x86_64.pkg.xzm, block size 262144.
[================================================================================================================/] 28/28 100%
Exportable Squashfs 4.0 filesystem, xz compressed, data block size 262144
compressed data, compressed metadata, compressed fragments, compressed xattrs
duplicates are removed
Filesystem size 507.34 Kbytes (0.50 Mbytes)
31.56% of uncompressed filesystem size (1607.78 Kbytes)
Inode table size 618 bytes (0.60 Kbytes)
24.94% of uncompressed inode table size (2478 bytes)
Directory table size 590 bytes (0.58 Kbytes)
33.13% of uncompressed directory table size (1781 bytes)
Number of duplicate files found 0
Number of inodes 77
Number of files 26
Number of fragments 4
Number of symbolic links 0
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 51
Number of ids (unique uids + gids) 1
Number of uids 1
root (0)
Number of gids 1
root (0)
ERROR: Module directory is not mounted or unwritable.
Check your module config file for ModuleDirctory=
Operation completed successfully.
The following modules were copied to your modules folder:
/mnt/sda3/nemesis/modules
mtpaint-3.40-15-x86_64.pkg.xzm
ERROR: Module directory is not mounted or unwritable.
well blow me, I should have checked this but this is the first time I get the error to check it
Code: Select all
ls -al /mnt/sda3/nemesis
total 36
dr-xr-xr-x 7 root root 4096 Nov 7 13:09 .
drwxr-xr-x 10 1001 games 4096 Nov 7 13:04 ..
dr-xr-xr-x 2 root root 4096 Nov 9 22:22 base
drwxr-xr-x 11 root root 4096 Nov 1 21:50 changes
-r-xr-xr-x 1 root root 853 Oct 9 22:36 make_iso.sh
dr-xr-xr-x 2 root root 4096 Nov 10 08:56 modules
-r--r--r-- 1 root root 437 Dec 12 2013 nemesis-v3.1-x86_64.sgn
dr-xr-xr-x 2 root root 4096 Nov 9 23:02 optional
drwxr-xr-x 2 root root 4096 Nov 1 21:50 rootcopy
However, it is likely to be explained that I simply unpacked the iso and copied umm cd files and should have made them read writeable
However (2) without chmod command to fix this issue
Code: Select all
find / -name mtpaint-3.40-15-x86_64.pkg.xzm
/mnt/sda3/nemesis/modules/mtpaint-3.40-15-x86_64.pkg.xzm
It still got in there!
will fix and report back if changes bootcode now works with the chmod to fix directories
Re: pacman/pman --feedback do not attempt
Posted: 10 Nov 2015, 09:27
by aus9
OK this post is a full reboot using the changes bootcode cheatcode
no modules is created so it does look like I will need to watch that.
ncmprhnsbl and francois
You have got beyond the job description to help me out.
I now know how to get a module and the gui to package manager can be a later topic
for now, thankyou very much marked as solved
Re: [SOLVED] pacman/pman --feedback do not attempt
Posted: 10 Nov 2015, 12:06
by ncmprhnsbl
aus9 wrote:
Yes and did not realize that changes cheatcode was seen by some as being not recommended?
well it is the default entry in the bootloader and definately not "not recomended"
aus9 wrote:It still got in there!
that it wrote to unwritable is a bit odd..
bear in mind that this is a work in progress and i think pman should inform us when its not
making a module and why..or perhaps a choice.. along the lines of:
You are saving your changes, so you dont need a module?(Y/N)
or
Changes cheatcode detected, package(s) will be installed. Do you wish to make a Module as well?(Y/N)
Re: [SOLVED] pacman/pman --feedback do not attempt
Posted: 10 Nov 2015, 21:15
by brokenman
You are saving your changes, so you dont need a module?(Y/N
Yes thanks. This has been implemented in the latest version (as yet unreleased). If you are saving changes but have the option to create modules in the config file then it will still create the module. I have also added a script to create a module from a package that you already have installed. A little like: bacman will create a tarball of a package you have installed. pkg2xzm will create a porteus module from a package.
Re: [SOLVED] pacman/pman --feedback do not attempt
Posted: 10 Nov 2015, 22:19
by francois
@ brokenman:
Very good.
Thanks.