[Solved]Blueman

Get help with XFCE specific problems
xtudiux
Black ninja
Black ninja
Posts: 72
Joined: 07 Mar 2011, 06:01
Location: Philippines

[Solved]Blueman

Post#1 by xtudiux » 17 Aug 2013, 09:14

goodpm,

Anybody able to make bluetooth work in porteus 2.1 xfce 64bit??? it works in v2.0 xfce 64bit...
Last edited by xtudiux on 20 Aug 2013, 09:20, edited 1 time in total.

User avatar
wread
Module Guard
Module Guard
Posts: 1255
Joined: 09 Jan 2011, 18:48
Distribution: Porteus v5.0-kde-64 bits
Location: Santo Domingo
Contact:

Re: Blueman

Post#2 by wread » 17 Aug 2013, 13:10

Do you have Python installed? Try #python --version to find out if you have it...
Porteus is proud of the FASTEST KDE ever made.....(take akonadi, nepomuk and soprano out and you will have a decent OS).
The Porteus Community never sleeps!

xtudiux
Black ninja
Black ninja
Posts: 72
Joined: 07 Mar 2011, 06:01
Location: Philippines

Re: Blueman

Post#3 by xtudiux » 17 Aug 2013, 15:11

I have python..

User avatar
wread
Module Guard
Module Guard
Posts: 1255
Joined: 09 Jan 2011, 18:48
Distribution: Porteus v5.0-kde-64 bits
Location: Santo Domingo
Contact:

Re: Blueman

Post#4 by wread » 17 Aug 2013, 16:43

check to see if you have Pyrex in /usr/lib/python2.7/site-packages/; I needed it to compile Blueman for 32 bits. If you are using the compatibility module, you could use it, I guess...I mean Blueman for 32-bits.
Porteus is proud of the FASTEST KDE ever made.....(take akonadi, nepomuk and soprano out and you will have a decent OS).
The Porteus Community never sleeps!

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Blueman

Post#5 by fanthom » 17 Aug 2013, 19:36

please post the error you are getting.
also - did you download blueman through PPM with all deps (python,dbus-python,notify-python,pycairo,pygobject,pygtk) or got it from 3rd party source (slackyd, module created by other users)?
Please add [Solved] to your thread title if the solution was found.

xtudiux
Black ninja
Black ninja
Posts: 72
Joined: 07 Mar 2011, 06:01
Location: Philippines

Re: Blueman

Post#6 by xtudiux » 19 Aug 2013, 03:40

@francios
I have the python folder..

@fanthom
I got it from ppm.
though i think i have python2.6 and python 2.7 on lib64
BLUEZ is not running but the bluetooth is on... :)

xtudiux
Black ninja
Black ninja
Posts: 72
Joined: 07 Mar 2011, 06:01
Location: Philippines

Re: Blueman

Post#7 by xtudiux » 19 Aug 2013, 10:17

it now works...heheheh...I just download the kernel-firmware...I didnt know you need it...heheheh

User avatar
fanthom
Moderator Team
Moderator Team
Posts: 5666
Joined: 28 Dec 2010, 02:42
Distribution: Porteus Kiosk
Location: Poland
Contact:

Re: Blueman

Post#8 by fanthom » 19 Aug 2013, 19:49

@xtudiux
please share your /var/log/dmesg so i can check which bluetooth firmware is missing and perhaps included it in next release (if wont be too big).
Please add [Solved] to your thread title if the solution was found.

xtudiux
Black ninja
Black ninja
Posts: 72
Joined: 07 Mar 2011, 06:01
Location: Philippines

Re: Blueman

Post#9 by xtudiux » 20 Aug 2013, 05:25

@fanthom

Code: Select all

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.11-porteus (root@porteus) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 22:29:21 UTC 2013
[    0.000000] Command line: initrd=initrd.xz changes=/porteus  BOOT_IMAGE=vmlinuz 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000075abefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075abf000-0x0000000075ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000075ebf000-0x0000000075fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000075fbf000-0x0000000075ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000075fff000-0x0000000075ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076000000-0x000000007e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Q1VZC/Mimic             , BIOS V1.05 07/19/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 076000000 mask FFE000000 uncachable
[    0.000000]   2 base 078000000 mask FF8000000 uncachable
[    0.000000]   3 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   4 base 100000000 mask FFF800000 write-back
[    0.000000]   5 base 100600000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] e820: last_pfn = 0x76000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01755000, 0x01755fff] PGTABLE
[    0.000000] BRK [0x01756000, 0x01756fff] PGTABLE
[    0.000000] BRK [0x01757000, 0x01757fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[    0.000000]  [mem 0x100400000-0x1005fffff] page 2M
[    0.000000] BRK [0x01758000, 0x01758fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[    0.000000]  [mem 0x100000000-0x1003fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0x75abefff]
[    0.000000]  [mem 0x40200000-0x759fffff] page 2M
[    0.000000]  [mem 0x75a00000-0x75abefff] page 4k
[    0.000000] BRK [0x01759000, 0x01759fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x75fff000-0x75ffffff]
[    0.000000]  [mem 0x75fff000-0x75ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x1ff52000-0x1fffefff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0000000075ffe210 0008C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0000000075ffb000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0000000075fec000 0B7C5 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0000000075fbb000 00040
[    0.000000] ACPI: UEFI 0000000075ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 0000000075ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0000000075ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0000000075ff9000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0000000075ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SLIC 0000000075feb000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0000000075fea000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0000000075fe8000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 0000000075fe3000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0000000075fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0000000075fe0000 0079A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0000000075fdf000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff]
[    0.000000]   NODE_DATA [mem 0x1005fa000-0x1005fdfff]
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880073600000-ffff8800755fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1005fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0x75abefff]
[    0.000000]   node   0: [mem 0x75fff000-0x75ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x1005fffff]
[    0.000000] On node 0 totalpages: 482396
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7451 pages used for memmap
[    0.000000]   DMA32 zone: 476864 pages, LIFO batch:31
[    0.000000]   Normal zone: 24 pages used for memmap
[    0.000000]   Normal zone: 1536 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 0000000075abf000 - 0000000075ebf000
[    0.000000] PM: Registered nosave memory: 0000000075ebf000 - 0000000075fbf000
[    0.000000] PM: Registered nosave memory: 0000000075fbf000 - 0000000075fff000
[    0.000000] PM: Registered nosave memory: 0000000076000000 - 000000007ea00000
[    0.000000] PM: Registered nosave memory: 000000007ea00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc80000
[    0.000000] PM: Registered nosave memory: 00000000ffc80000 - 0000000100000000
[    0.000000] e820: [mem 0x7ea00000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff880100200000 s74944 r8192 d23360 u262144
[    0.000000] pcpu-alloc: s74944 r8192 d23360 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 474701
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: quiet initrd=initrd.xz changes=/porteus  BOOT_IMAGE=vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 1821008k/4200448k available (4123k kernel code, 2270864k absent, 108576k reserved, 1971k data, 784k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 1496.727 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.45 BogoMIPS (lpj=1496727)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000264] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000956] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.001249] Mount-cache hash table entries: 256
[    0.001546] CPU: Physical Processor ID: 0
[    0.001548] CPU: Processor Core ID: 0
[    0.001555] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001555] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001558] mce: CPU supports 7 MCE banks
[    0.001574] CPU0: Thermal monitoring enabled (TM1)
[    0.001589] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.001589] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.001589] tlb_flushall_shift: 5
[    0.001719] Freeing SMP alternatives: 12k freed
[    0.001726] ACPI: Core revision 20130117
[    0.009976] ACPI: All ACPI Tables successfully acquired
[    0.027603] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.037611] smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (fam: 06, model: 2a, stepping: 07)
[    0.037620] TSC deadline timer enabled
[    0.037632] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.037642] ... version:                3
[    0.037643] ... bit width:              48
[    0.037645] ... generic registers:      4
[    0.037647] ... value mask:             0000ffffffffffff
[    0.037649] ... max period:             000000007fffffff
[    0.037650] ... fixed-purpose events:   3
[    0.037652] ... event mask:             000000070000000f
[    0.047771] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.091674] Brought up 4 CPUs
[    0.091678] smpboot: Total of 4 processors activated (11973.81 BogoMIPS)
[    0.095818] devtmpfs: initialized
[    0.096091] PM: Registering ACPI NVS region [mem 0x75ebf000-0x75fbefff] (1048576 bytes)
[    0.096221] NET: Registered protocol family 16
[    0.096710] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.096713] ACPI: bus type PCI registered
[    0.096928] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.096933] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.116079] PCI: Using configuration type 1 for base access
[    0.123941] bio: create slab <bio-0> at 0
[    0.124079] ACPI: Added _OSI(Module Device)
[    0.124082] ACPI: Added _OSI(Processor Device)
[    0.124085] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.124087] ACPI: Added _OSI(Processor Aggregator Device)
[    0.126282] ACPI: EC: Look up EC in DSDT
[    0.128472] ACPI: Executed 1 blocks of module-level executable AML code
[    0.138797] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.139301] ACPI: SSDT 0000000075e18018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.139869] ACPI: Dynamic OEM Table Load:
[    0.139873] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.143032] ACPI: SSDT 0000000075e19a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.143637] ACPI: Dynamic OEM Table Load:
[    0.143640] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.146838] ACPI: SSDT 0000000075e17d98 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.147382] ACPI: Dynamic OEM Table Load:
[    0.147384] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.150746] ACPI: Interpreter enabled
[    0.150757] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[    0.150764] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[    0.150784] ACPI: (supports S0 S3 S4 S5)
[    0.150787] ACPI: Using IOAPIC for interrupt routing
[    0.150873] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.347619] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.347812] \_SB_.PCI0:_OSC invalid UUID
[    0.347814] _OSC request data:1 8 0 
[    0.348686] PCI host bridge to bus 0000:00
[    0.348694] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.348698] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.348701] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.348705] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.348708] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff]
[    0.348721] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.348888] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.348905] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[    0.348914] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.348922] pci 0000:00:02.0: reg 20: [io  0x2000-0x203f]
[    0.349120] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.349160] pci 0000:00:14.0: reg 10: [mem 0x90600000-0x9060ffff 64bit]
[    0.349293] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.349341] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.349434] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.349473] pci 0000:00:16.0: reg 10: [mem 0x90614000-0x9061400f 64bit]
[    0.349604] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.349777] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.350117] pci 0000:00:1a.0: reg 10: [mem 0x90619000-0x906193ff]
[    0.352012] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.352077] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.352176] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.352205] pci 0000:00:1b.0: reg 10: [mem 0x90610000-0x90613fff 64bit]
[    0.352344] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.352394] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.352487] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.352639] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.352692] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.352778] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.352929] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.352985] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.353070] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.353218] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.353275] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.353378] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.353714] pci 0000:00:1d.0: reg 10: [mem 0x90618000-0x906183ff]
[    0.355600] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.355667] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.355758] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.356025] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.356065] pci 0000:00:1f.2: reg 10: [io  0x2088-0x208f]
[    0.356081] pci 0000:00:1f.2: reg 14: [io  0x2094-0x2097]
[    0.356096] pci 0000:00:1f.2: reg 18: [io  0x2080-0x2087]
[    0.356113] pci 0000:00:1f.2: reg 1c: [io  0x2090-0x2093]
[    0.356129] pci 0000:00:1f.2: reg 20: [io  0x2060-0x207f]
[    0.356145] pci 0000:00:1f.2: reg 24: [mem 0x90617000-0x906177ff]
[    0.356243] pci 0000:00:1f.2: PME# supported from D3hot
[    0.356378] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.356407] pci 0000:00:1f.3: reg 10: [mem 0x90615000-0x906150ff 64bit]
[    0.356450] pci 0000:00:1f.3: reg 20: [io  0x2040-0x205f]
[    0.356758] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.356971] pci 0000:03:00.0: [14e4:4359] type 00 class 0x028000
[    0.357011] pci 0000:03:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
[    0.357220] pci 0000:03:00.0: supports D1 D2
[    0.357223] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.357279] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.358669] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.358686] pci 0000:00:1c.1:   bridge window [mem 0x90500000-0x905fffff]
[    0.358908] pci 0000:04:00.0: [14e4:16b5] type 00 class 0x020000
[    0.358949] pci 0000:04:00.0: reg 10: [mem 0x90410000-0x9041ffff 64bit pref]
[    0.358980] pci 0000:04:00.0: reg 18: [mem 0x90420000-0x9042ffff 64bit pref]
[    0.359040] pci 0000:04:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
[    0.359153] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.359212] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.359350] pci 0000:04:00.1: [14e4:16bc] type 00 class 0x080501
[    0.359390] pci 0000:04:00.1: reg 10: [mem 0x90400000-0x9040ffff 64bit pref]
[    0.359583] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[    0.361768] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.361788] pci 0000:00:1c.2:   bridge window [mem 0x90400000-0x904fffff 64bit pref]
[    0.361912] \_SB_.PCI0:_OSC invalid UUID
[    0.361914] _OSC request data:1 1f 0 
[    0.361920] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.361924] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.422334] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.422416] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.422495] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.422575] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.422652] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.422734] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.422811] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.422894] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.423270] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.423281] acpi root: \_SB_.PCI0 notify handler is installed
[    0.423360] Found 1 acpi root devices
[    0.423406] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.423621] ACPI: No dock devices found.
[    0.423776] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.423781] vgaarb: loaded
[    0.423783] vgaarb: bridge control possible 0000:00:02.0
[    0.424034] SCSI subsystem initialized
[    0.424039] ACPI: bus type ATA registered
[    0.424160] libata version 3.00 loaded.
[    0.424167] ACPI: bus type USB registered
[    0.424252] usbcore: registered new interface driver usbfs
[    0.424294] usbcore: registered new interface driver hub
[    0.424347] usbcore: registered new device driver usb
[    0.424597] PCI: Using ACPI for IRQ routing
[    0.432626] PCI: pci_cache_line_size set to 64 bytes
[    0.432804] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.432808] e820: reserve RAM buffer [mem 0x75abf000-0x77ffffff]
[    0.432810] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff]
[    0.432813] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[    0.433109] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.433117] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.435139] Switching to clocksource hpet
[    0.435242] pnp: PnP ACPI init
[    0.435256] ACPI: bus type PNP registered
[    0.435367] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.435572] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.435588] pnp 00:02: [dma 4]
[    0.435647] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.435717] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.435888] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.435967] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.436071] system 00:06: [io  0x0680-0x069f] has been reserved
[    0.436075] system 00:06: [io  0xfd60-0xfd63] has been reserved
[    0.436079] system 00:06: [io  0x1000-0x100f] has been reserved
[    0.436082] system 00:06: [io  0xffff] has been reserved
[    0.436085] system 00:06: [io  0xffff] has been reserved
[    0.436089] system 00:06: [io  0x0400-0x0453] has been reserved
[    0.436092] system 00:06: [io  0x0458-0x047f] has been reserved
[    0.436095] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.436098] system 00:06: [io  0x164e-0x164f] has been reserved
[    0.436102] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.436206] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.436322] system 00:08: [io  0x0454-0x0457] has been reserved
[    0.436327] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.496444] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.496448] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.496452] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.496455] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.496459] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.496463] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.496466] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.496470] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[    0.496473] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[    0.496477] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.496480] system 00:09: [mem 0x7ea00000-0x7ea00fff] has been reserved
[    0.496484] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496901] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.496905] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved
[    0.496909] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.496934] pnp: PnP ACPI: found 11 devices
[    0.496936] ACPI: bus type PNP unregistered
[    0.507167] pci 0000:04:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[    0.507195] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.507201] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.507205] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.507241] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.507245] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.507249] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.507255] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7eb00000-0x7ecfffff]
[    0.507260] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7ed00000-0x7eefffff 64bit pref]
[    0.507264] pci 0000:00:1c.2: BAR 14: assigned [mem 0x7ef00000-0x7effffff]
[    0.507269] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.507273] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.507279] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.507287] pci 0000:00:1c.0:   bridge window [mem 0x7eb00000-0x7ecfffff]
[    0.507295] pci 0000:00:1c.0:   bridge window [mem 0x7ed00000-0x7eefffff 64bit pref]
[    0.507306] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.507314] pci 0000:00:1c.1:   bridge window [mem 0x90500000-0x905fffff]
[    0.507330] pci 0000:04:00.0: BAR 6: assigned [mem 0x90430000-0x904307ff pref]
[    0.507333] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.507342] pci 0000:00:1c.2:   bridge window [mem 0x7ef00000-0x7effffff]
[    0.507349] pci 0000:00:1c.2:   bridge window [mem 0x90400000-0x904fffff 64bit pref]
[    0.507598] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.507601] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.507604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.507607] pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff]
[    0.507611] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.507614] pci_bus 0000:02: resource 1 [mem 0x7eb00000-0x7ecfffff]
[    0.507617] pci_bus 0000:02: resource 2 [mem 0x7ed00000-0x7eefffff 64bit pref]
[    0.507620] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
[    0.507623] pci_bus 0000:04: resource 1 [mem 0x7ef00000-0x7effffff]
[    0.507626] pci_bus 0000:04: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[    0.507664] NET: Registered protocol family 2
[    0.507869] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.507953] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.508008] TCP: Hash tables configured (established 16384 bind 16384)
[    0.508037] TCP: reno registered
[    0.508045] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.508061] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.508156] NET: Registered protocol family 1
[    0.508171] pci 0000:00:02.0: Boot video device
[    0.531339] PCI: CLS 64 bytes, default 64
[    0.531390] Unpacking initramfs...
[    0.663598] Freeing initrd memory: 692k freed
[    0.663720] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.663724] software IO TLB [mem 0x6f600000-0x73600000] (64MB) mapped at [ffff88006f600000-ffff8800735fffff]
[    0.663789] Simple Boot Flag at 0x44 set to 0x1
[    0.669588] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.669776] fuse init (API version 7.21)
[    0.669983] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.670866] aufs 3.9-20130722
[    0.670875] msgmni has been set to 3558
[    0.671312] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.671316] io scheduler noop registered
[    0.671318] io scheduler deadline registered (default)
[    0.672034] intel_idle: MWAIT substates: 0x21120
[    0.672037] intel_idle: v0.4 model 0x2A
[    0.672039] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.673992] loop: module loaded
[    0.674749] ahci 0000:00:1f.2: version 3.0
[    0.674910] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    0.674954] ahci: SSS flag set, parallel bus scan disabled
[    0.674981] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    0.674986] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    0.674993] ahci 0000:00:1f.2: setting latency timer to 64
[    0.676296] scsi0 : ahci
[    0.676462] scsi1 : ahci
[    0.676609] scsi2 : ahci
[    0.676755] scsi3 : ahci
[    0.676902] scsi4 : ahci
[    0.677056] scsi5 : ahci
[    0.677202] ata1: SATA max UDMA/133 abar m2048@0x90617000 port 0x90617100 irq 40
[    0.677204] ata2: DUMMY
[    0.677206] ata3: DUMMY
[    0.677208] ata4: DUMMY
[    0.677209] ata5: DUMMY
[    0.677211] ata6: DUMMY
[    0.680487] Fusion MPT base driver 3.04.20
[    0.680489] Copyright (c) 1999-2008 LSI Corporation
[    0.680498] Fusion MPT SPI Host driver 3.04.20
[    0.680552] Fusion MPT SAS Host driver 3.04.20
[    0.680614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.680616] ehci-pci: EHCI PCI platform driver
[    0.680735] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.680740] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.680748] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.680767] ehci-pci 0000:00:1a.0: debug port 2
[    0.684673] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.684693] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90619000
[    0.690094] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.690352] hub 1-0:1.0: USB hub found
[    0.690359] hub 1-0:1.0: 2 ports detected
[    0.690551] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.690556] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.690564] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.690583] ehci-pci 0000:00:1d.0: debug port 2
[    0.694496] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.694516] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90618000
[    0.700090] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.700323] hub 2-0:1.0: USB hub found
[    0.700329] hub 2-0:1.0: 2 ports detected
[    0.700471] ehci-platform: EHCI generic platform driver
[    0.700522] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.700620] uhci_hcd: USB Universal Host Controller Interface driver
[    0.700786] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.700791] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.700798] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.700899] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.700971] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.701185] xHCI xhci_add_endpoint called for root hub
[    0.701188] xHCI xhci_check_bandwidth called for root hub
[    0.701257] hub 3-0:1.0: USB hub found
[    0.701267] hub 3-0:1.0: 4 ports detected
[    0.701671] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.701677] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.701838] xHCI xhci_add_endpoint called for root hub
[    0.701840] xHCI xhci_check_bandwidth called for root hub
[    0.701909] hub 4-0:1.0: USB hub found
[    0.701918] hub 4-0:1.0: 4 ports detected
[    0.709190] Initializing USB Mass Storage driver...
[    0.709263] usbcore: registered new interface driver usb-storage
[    0.709266] USB Mass Storage support registered.
[    0.709318] usbcore: registered new interface driver ums-alauda
[    0.709367] usbcore: registered new interface driver ums-cypress
[    0.709417] usbcore: registered new interface driver ums-datafab
[    0.709466] usbcore: registered new interface driver ums-freecom
[    0.709516] usbcore: registered new interface driver ums-isd200
[    0.709566] usbcore: registered new interface driver ums-jumpshot
[    0.709616] usbcore: registered new interface driver ums-karma
[    0.709666] usbcore: registered new interface driver ums-onetouch
[    0.709722] usbcore: registered new interface driver ums-realtek
[    0.709772] usbcore: registered new interface driver ums-sddr09
[    0.709822] usbcore: registered new interface driver ums-sddr55
[    0.709871] usbcore: registered new interface driver ums-usbat
[    0.710005] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSA1] at 0x60,0x64 irq 1,12
[    0.723216] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.723253] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.723422] rtc_cmos 00:07: RTC can wake from S4
[    0.723632] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.723670] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.723729] Intel P-state driver initializing.
[    0.723746] Intel pstate controlling: cpu 0
[    0.723765] Intel pstate controlling: cpu 1
[    0.723781] Intel pstate controlling: cpu 2
[    0.723796] Intel pstate controlling: cpu 3
[    0.723981] cpuidle: using governor ladder
[    0.724729] cpuidle: using governor menu
[    0.724791] sdhci: Secure Digital Host Controller Interface driver
[    0.724793] sdhci: Copyright(c) Pierre Ossman
[    0.724813] sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[    0.739668] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.754119] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
[    0.754407] wbsd: Winbond W83L51xD SD/MMC card interface driver
[    0.754410] wbsd: Copyright(c) Pierre Ossman
[    0.754755] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    0.754923] usbcore: registered new interface driver vub300
[    0.754982] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.755574] hidraw: raw HID events driver (C) Jiri Kosina
[    0.755701] usbcore: registered new interface driver usbhid
[    0.755703] usbhid: USB HID core driver
[    0.755839] TCP: cubic registered
[    0.755843] NET: Registered protocol family 17
[    0.756769] registered taskstats version 1
[    0.758493] rtc_cmos 00:07: setting system clock to 2013-08-20 08:40:37 UTC (1376988037)
[    0.982031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.983812] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA920, max UDMA/133
[    0.983825] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.984786] ata1.00: configured for UDMA/133
[    0.985165] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    0.986004] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.986011] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.986175] sd 0:0:0:0: [sda] Write Protect is off
[    0.986181] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.986241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.993021] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.083823]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.085115] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.090326] Freeing unused kernel memory: 784k freed
[    1.114996] hub 1-1:1.0: USB hub found
[    1.117250] hub 1-1:1.0: 6 ports detected
[    1.219976] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.335382] hub 2-1:1.0: USB hub found
[    1.335536] hub 2-1:1.0: 8 ports detected
[    1.410060] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.472057] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    1.498330] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[    1.499036] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    1.572995] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.664873] tsc: Refined TSC clocksource calibration: 1496.601 MHz
[    1.664881] Switching to clocksource tsc
[    2.524449] REISERFS warning (device loop5): sh-2006 read_super_block: bread failed (dev loop5, block 2, size 4096)
[    2.524463] REISERFS warning (device loop5): sh-2006 read_super_block: bread failed (dev loop5, block 16, size 4096)
[    2.536098] REISERFS warning (device loop6): sh-2006 read_super_block: bread failed (dev loop6, block 2, size 4096)
[    2.536110] REISERFS warning (device loop6): sh-2006 read_super_block: bread failed (dev loop6, block 16, size 4096)
[    3.095509] REISERFS warning (device loop15): sh-2006 read_super_block: bread failed (dev loop15, block 16, size 4096)
[    4.672870] REISERFS warning (device loop42): sh-2006 read_super_block: bread failed (dev loop42, block 16, size 4096)
[    5.192442] REISERFS warning (device loop52): sh-2006 read_super_block: bread failed (dev loop52, block 16, size 4096)
[    5.396592] REISERFS warning (device loop57): sh-2006 read_super_block: bread failed (dev loop57, block 16, size 4096)
[    5.753258] REISERFS warning (device loop64): sh-2006 read_super_block: bread failed (dev loop64, block 16, size 4096)
[    5.836994] REISERFS warning (device loop66): sh-2006 read_super_block: bread failed (dev loop66, block 16, size 4096)
[    6.128426] REISERFS warning (device loop72): sh-2006 read_super_block: bread failed (dev loop72, block 16, size 4096)
[    6.432192] REISERFS warning (device loop77): sh-2006 read_super_block: bread failed (dev loop77, block 16, size 4096)
[   12.685554] udevd[2080]: starting version 182
[   14.031087] wmi: Mapper loaded
[   14.381856] [Firmware Bug]: battery: (dis)charge rate invalid.
[   14.381982] ACPI: Battery Slot [BAT1] (battery present)
[   14.382211] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1
[   14.382965] ACPI: Power Button [PWRB]
[   14.383165] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input2
[   14.383376] ACPI: Lid Switch [LID0]
[   14.383552] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3
[   14.383666] ACPI: Sleep Button [SLPB]
[   14.383864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   14.384067] ACPI: AC Adapter [ACAD] (on-line)
[   14.384565] ACPI: Power Button [PWRF]
[   14.618377] lib80211: common routines for IEEE802.11 drivers
[   14.618385] lib80211_crypt: registered algorithm 'NULL'
[   14.782233] media: Linux media interface: v0.10
[   14.838946] ACPI Warning: 0x0000000000002040-0x000000000000205f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[   14.838960] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.373464] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2292, fw id: 1146734
[   15.433743] Bluetooth: Core ver 2.16
[   15.433784] NET: Registered protocol family 31
[   15.433791] Bluetooth: HCI device and connection manager initialized
[   15.433805] Bluetooth: HCI socket layer initialized
[   15.433814] Bluetooth: L2CAP socket layer initialized
[   15.433830] Bluetooth: SCO socket layer initialized
[   15.447384] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[   15.480700] Linux video capture interface: v2.00
[   15.716717] usbcore: registered new interface driver btusb
[   15.742776] mousedev: PS/2 mouse device common for all mice
[   16.009717] ACPI: Requesting acpi_cpufreq
[   16.043763] Linux agpgart interface v0.103
[   16.191145] pps_core: LinuxPPS API ver. 1 registered
[   16.191171] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   16.323990] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.323999] Bluetooth: BNEP filters: protocol multicast
[   16.324022] Bluetooth: BNEP socket layer initialized
[   16.394937] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
[   16.400222] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[   16.400395] usbcore: registered new interface driver uvcvideo
[   16.400401] USB Video Class driver (1.1.1)
[   16.411610] PTP clock support registered
[   16.448708] Bluetooth: RFCOMM TTY layer initialized
[   16.448728] Bluetooth: RFCOMM socket layer initialized
[   16.448732] Bluetooth: RFCOMM ver 1.11
[   16.468811] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   16.954791] acer_wmi: Acer Laptop ACPI-WMI Extras
[   16.954813] acer_wmi: Function bitmap for Communication Button: 0x801
[   16.954985] acer_wmi: Brightness must be controlled by acpi video driver
[   16.973573] input: Acer WMI hotkeys as /devices/virtual/input/input7
[   16.974214] input: Acer BMA150 accelerometer as /devices/virtual/input/input8
[   16.981129] tg3.c:v3.130 (February 14, 2013)
[   16.999356] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:ce:64:84
[   16.999366] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   16.999373] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   16.999378] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   17.004571] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.004708] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.076805] [drm] Initialized drm 1.1.0 20060810
[   17.114132] wl: module license 'unspecified' taints kernel.
[   17.114140] Disabling lock debugging due to kernel taint
[   17.204923] lib80211_crypt: registered algorithm 'TKIP'
[   17.205243] eth1: Broadcom BCM4359 802.11 Hybrid Wireless Controller 5.100.82.112
[   17.227348] [drm] Memory usable by graphics device = 2048M
[   17.227360] i915 0000:00:02.0: setting latency timer to 64
[   17.258850] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   17.258866] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   17.258869] [drm] Driver supports precise vblank timestamp query.
[   17.258969] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   17.335498] [drm] Wrong MCH_SSKPD value: 0x16040307
[   17.335506] [drm] This can cause pipe underruns and display issues.
[   17.335510] [drm] Please upgrade your BIOS to fix this.
[   17.348101] fbcon: inteldrmfb (fb0) is primary device
[   18.086268] Console: switching to colour frame buffer device 170x48
[   18.097902] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   18.097909] i915 0000:00:02.0: registered panic notifier
[   18.399660] acpi device:3c: registered as cooling_device4
[   18.399931] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   18.400006] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   18.400127] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   18.725692] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off


Post Reply