Page 1 of 1
USM update ERROR [Solved]
Posted: 09 Jul 2016, 13:11
by Ed_P
Code: Select all
Starting slackonly database update
Downloading: CHECKSUMS.md5.gz DONE
Downloading: MANIFEST.bz2 DONE
Downloading: PACKAGES.TXT.gz DONE
Downloading: LIBS.TXT.gz DONE
gzip: /var/usm/slackonly/CHECKSUMS.md5.gz: unexpected end of file
==============================================================================
WARNING! WARNING! WARNING! WARNING! WARNING!
==============================================================================
One or more errors occurred while usm was running:
FATAL ERROR!
usm update_database 270
Could not decompress: CHECKSUMS.md5.gz
==============================================================================
sh-4.2#
Re: USM update ERROR
Posted: 10 Jul 2016, 03:07
by ncmprhnsbl
looks like Slackonlys' server is down... lets hope its temporary...
maybe even a major upgrade related to the recent Slackware 14.2 release or some improvement to slackrepo repo builder? (pure speculation)
Re: USM update ERROR
Posted: 10 Jul 2016, 11:39
by Jack
USM works again I just updated all.
Re: USM update ERROR [Solved]
Posted: 10 Jul 2016, 19:52
by Jack
When will USM be able to use 14.2 files cause my USM is still load in 14.1 Slackware files?
Re: USM update ERROR [Solved]
Posted: 10 Jul 2016, 21:02
by Blaze
Jack, we are need to wait
brokeman - he will fix it.
Or you can try these commands in terminal
Code: Select all
sed -i 's/14.2/14.1/' /etc/slackware-version
sed -i 's/||.*]//' /usr/share/usm/funcsystemSetup
Re: USM update ERROR [Solved]
Posted: 10 Aug 2016, 22:18
by ChuckyWarly
Hi. I have got the exact same problem as the OP. I tried Blaze's commands but no response in terminal and the problem persists. Any suggestions?
Re: USM update ERROR [Solved]
Posted: 11 Aug 2016, 00:11
by Ed_P
The OP just ran an update and it finished without a problem.
Do note the OP is running a 64-bit system where as you are running a 32-bit one thus pulling different files. And maybe even from different servers than the OP, S. Africa vs USA..
The
Blaze commands have no bearing on the problem you're having.
You will have to wait for
brokenman to fix the problem.
Re: USM update ERROR [Solved]
Posted: 11 Aug 2016, 01:51
by brokenman
If you are running Porteus v3.1 you will need to have version 14.1 in your usm.conf file. If you ran the commands from Blaze you will need to revert them manually. Next open up /etc/usm/mirrors-slackware.txt and change the mirror in there to something near you.
Re: USM update ERROR [Solved]
Posted: 11 Aug 2016, 11:20
by ChuckyWarly
My sincere apologies. On closer inspection, my problem is slightly different to OP.
Code: Select all
Starting ponce database update
Downloading: vercheck.txt DONE
Downloading: CHECKSUMS.md5.gz DONE
Downloading: MANIFEST.bz2 DONE
Downloading: PACKAGES.TXT.gz DONE
Downloading: LIBS.TXT.gz DONE
gzip: /var/usm/ponce/CHECKSUMS.md5.gz: not in gzip format
==============================================================================
WARNING! WARNING! WARNING! WARNING! WARNING!
==============================================================================
One or more errors occurred while usm was running:
FATAL ERROR!
usm update_database 270
Could not decompress: CHECKSUMS.md5.gz
==============================================================================
Re: USM update ERROR [Solved]
Posted: 11 Aug 2016, 17:34
by Ed_P
ChuckyWarly wrote:My sincere apologies. On closer inspection, my problem is slightly different to OP.
That's ok, the solution is still the same.
Re: USM update ERROR [Solved]
Posted: 13 Aug 2016, 22:39
by ChuckyWarly
Ok, so I've checked that I've got 14.1 in my usm.conf file and I've have tried a variety of mirrors, but the problem persists. Also, I am using 3.1 x64 MATE now.
Re: USM update ERROR [Solved]
Posted: 14 Aug 2016, 00:14
by brokenman
Can you please give the output (as root) of: usm -i
Re: USM update ERROR [Solved]
Posted: 14 Aug 2016, 07:15
by ChuckyWarly
Code: Select all
usm application information
USM version: 3.1.9
DB version: 150923
Current storage: /tmp/usm
Current config: /etc/usm/usm.conf
Current platform: Porteus-v3.1
Current arch: x86_64
Slackware Slackware 14.1
Current kernel 3.17.4-porteus
Current distros: slackware slackwarepatches slacky salix alien ponce slackonly
quiet initrd=initrd.xz changes=/porteus timezone=Africa/Johannesburg utc kmap=za,us BOOT_IMAGE=vmlinuz
Use: usm -i <package>
For example: usm -i imagemagick
Re: USM update ERROR [Solved]
Posted: 14 Aug 2016, 10:13
by Bogomips
Slightly offtopic. Been using usm -i <pckage>, but that, without package is great, providing almost all the additional information I like to have at one go, when skipping between desktops, versions, and architecture.