Page 5 of 17
Re: Porteus-v3.2rc4 bug reports
Posted: 14 Jul 2016, 07:39
by Blaze
jmhoward56, thanks.
Themes > Settings > need to be
Cinnamon x86_64
Trouble if patch have spaces for
cd and
ls commands
Example. Can't access via terminal to Porteus 3.2 directory - trouble with space 3.2
Code: Select all
root@porteus:~# cd /mnt/sda5/BudSmart_Linux/Porteus 3.2
bash: cd: /mnt/sda5/BudSmart_Linux/Porteus: No such file or directory
root@porteus:~# cd /mnt/sda5/BudSmart_Linux/
root@porteus:/mnt/sda5/BudSmart_Linux# ls /mnt/sda5/BudSmart_Linux/Porteus 3.2
/bin/ls: cannot access '/mnt/sda5/BudSmart_Linux/Porteus': No such file or directory
/bin/ls: cannot access '3.2': No such file or directory
root@porteus:/mnt/sda5/BudSmart_Linux#
Plus
if folder name has spaces I can't to activate, deactivate or extract module
Re: Porteus-v3.2rc4 bug reports
Posted: 14 Jul 2016, 10:50
by Bogomips
Blaze wrote:
Code: Select all
root@porteus:/mnt/sda5/BudSmart_Linux# ls /mnt/sda5/BudSmart_Linux/Porteus 3.2
/bin/ls: cannot access '/mnt/sda5/BudSmart_Linux/Porteus': No such file or directory
/bin/ls: cannot access '3.2': No such file or directory
root@porteus:/mnt/sda5/BudSmart_Linux#
This is to be expected. Space is used as separator:
Code: Select all
guest@porteus:~$ mkdir a1 a2
guest@porteus:~$ touch a1/f1
guest@porteus:~$ touch a2/f2
guest@porteus:~$ ls -l a*
a1:
total 0
-rw-r--r-- 1 guest users 0 Jul 14 12:47 f1
a2:
total 0
-rw-r--r-- 1 guest users 0 Jul 14 12:47 f2
guest@porteus:~$ ls -l a1 a2
a1:
total 0
-rw-r--r-- 1 guest users 0 Jul 14 12:47 f1
a2:
total 0
-rw-r--r-- 1 guest users 0 Jul 14 12:47 f2
Re: Porteus-v3.2rc4 bug reports
Posted: 14 Jul 2016, 18:22
by jmhoward56
You should be able to do ls /mnt/sda5/BudSmart_Linux/"Porteus 3.2" (add quotes around Porteus 3.2) and have it work. If you tried to use mkdir /mnt/sda5/BudSmart_Linux/Porteus 3.2 you may find you have one dir called Porteus and one called 3.2. If the string contains a space you have to enclose it in "quotes".
Re: Porteus-v3.2rc4 bug reports
Posted: 14 Jul 2016, 19:22
by Blaze
Thanks guys for bash lesson.
Cinnamon x86_64
If run in terminal
/usr/bin/cinnamon-settings and select the tab '
Date & Time' - GUI is lost with this message:
Code: Select all
(cinnamon-settings.py:1769): datetime-cc-panel-WARNING **: Failed to get using ntp: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.cinnamon.SettingsDaemon.DateTimeMechanism was not provided by any .service files
(cinnamon-settings.py:1769): datetime-cc-panel-WARNING **: Your system does not have the 'org.cinnamon.settingsdaemon.datetimemechanism.configure' PolicyKit files installed. Please check your installation
(cinnamon-settings.py:1769): datetime-cc-panel-WARNING **: Could not get current timezone: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.cinnamon.SettingsDaemon.DateTimeMechanism was not provided by any .service files
*** Error in `python2': free(): invalid pointer: 0x0000000001a773b0 ***
Re: Porteus-v3.2rc4 bug reports
Posted: 14 Jul 2016, 21:57
by jmhoward56
I switched to the cinnamon 64bit porteus just now and when I run the command on mine as you did I receive the ntp error (network time ) , mine however goes ahead and sets it to Europe/London and displays the screen. Mine is a clean usb install with only the 05-devel.xzm package installed and the crippled_sources.xzm package.
Re: Porteus-v3.2rc4 bug reports
Posted: 15 Jul 2016, 07:07
by Blaze
Confirm - in Always Fresh mode all ok. Thanks.
But - what's mean this message?
Code: Select all
Could not find wacom module; is the cinnamon-control-center package installed?
Full log
Code: Select all
guest@porteus:~$ cinnamon-settings
Could not find wacom module; is the cinnamon-control-center package installed?
** (cinnamon-settings.py:1283): WARNING **: AT-SPI: Could not obtain desktop path or name
** (cinnamon-settings.py:1283): WARNING **: atk-bridge: GetRegisteredEvents returned message with unknown signature
** (cinnamon-settings.py:1283): WARNING **: atk-bridge: get_device_events_reply: unknown signature
** (cinnamon-settings.py:1283): WARNING **: atk-bridge: get_device_events_reply: unknown signature
Loading Calendar module
(cinnamon-settings.py:1283): datetime-cc-panel-WARNING **: Failed to get using ntp: GDBus.Error:org.cinnamon.SettingsDaemon.DateTimeMechanism.GeneralError: Error enabling NTP: OS variant not supported
(cinnamon-settings.py:1283): datetime-cc-panel-WARNING **: Timezone 'localtime' is unhandled, setting Europe/London as default
Re: Porteus-v3.2rc4 bug reports
Posted: 15 Jul 2016, 13:07
by Payoon
Hi folks,
doesnt work (invalid instruction). I took the unrar file from rarlabs' latest beta (5.4) and copied it over the porteus one and then it was OK. Also
is missing libfl.so.2.
All small stuff. Otherwise very good experience with XFCE 32bit rc4. It is very snappy and swift. The only thing that imho should be replaced as default in the final version is the paper icon theme. It is too pale I think. I am using Faenca now and hicolor as fallback.
So long.
Payoon
Re: Porteus-v3.2rc4 bug reports
Posted: 15 Jul 2016, 17:21
by jmhoward56
Blaze, I saw the wacom driver message on mine and all I can think of is it has built in wacom network support in one of the cinnamon-settings applets and is doing a check for all network cards attached to the computer and is unable to do a wacom verification because of the missing driver. I don't think it will be a problem unless you have a wacom card installed and then the driver will probably be loaded.
Re: Porteus-v3.2rc4 bug reports
Posted: 15 Jul 2016, 17:36
by kalehrl
Why isn't LXQT available in these rc builds?
It would be nice to have a light DE.
Any chance of good old LXDE?
Re: Porteus-v3.2rc4 bug reports
Posted: 15 Jul 2016, 23:03
by ncmprhnsbl
@Blaze, jmhoward56
the wacom bit refers to a GUI for graphics tablets settings, either because it isnt there or there is no tablet connected(havnt tested cinnamon myself)
Re: Porteus-v3.2rc4 bug reports
Posted: 16 Jul 2016, 12:01
by Blaze
brokenman and
all
I fixed context menu of Nemo (Cinnamon environment) at
/usr/share/nemo/actions
- added these actions: deb2xzm.nemo_action, remove-slack.nemo_action, rpm2xzm.nemo_action, txz2xzm.nemo_action, unmount-module.nemo_action
- fixed mount-iso.nemo_action (replace /opt/porteus-scripts/context-menu/mount-iso script on mount via gvfsd-archive)
- added Russian localization
- fixed missing icons and removed extra spaces and variables
Download nemo-actions-fix-by-blaze.xzm
But still one thing - if folder name has spaces I can't to activate, deactivate, extract, convert, mount a module etc.
This construction
"quotes
" does not help me.
For example deb2xzm.nemo_action - look at the
"%F"
Code: Select all
[Nemo Action]
Name=Convert %N to xzm
Name[ru]=Конвертировать %N в xzm
Comment=Convert deb package to xzm
Comment[ru]=Конвертировать deb пакет в xzm
Exec=/opt/porteus-scripts/context-menu/convert_deb "%F"
Icon-Name=cdr
Selection=s
Extensions=deb;
but mount-iso.nemo_action seems work fine
Code: Select all
[Nemo Action]
Name=Mount: %N
Name[ru]=Смонтировать: %N
Comment=Mount an ISO
Comment[ru]=Смонтировать образ
Icon-Name=media-optical
Exec=/usr/libexec/gvfsd-archive file="%F"
Selection=s
Extensions=iso;nrg;bin;img;mdf;
If anybody knows how to fix it, please let me know about it.
Re: Porteus-v3.2rc4 bug reports
Posted: 16 Jul 2016, 15:35
by jmhoward56
@Blaze
The problem may be in the porteus scripts and not nemo actions.
according to GitHub, nemo actions can escape spaces on their own by adding this to the file;
Quotes=double and/or EscapeSpaces=true. I tried various combinations of both with the install slackware package action, nothing worked.
I then decided to check the actual porteus script to make sure it was working. I created a directory called "My folder" and placed blackbox-0.70.1-i486-7.txz in it. Opened a terminal there and ran txz2xzm blackbox-* which should have installed the file but did not. To confirm this I placed the same file in "Downloads" and ran same command which did install file. This makes me think porteus script has issue.
Re: Porteus-v3.2rc4 bug reports
Posted: 16 Jul 2016, 16:55
by Blaze
I confirm that unrar in rc4 does not work. If do update unrar to
http://download.salixos.org/x86_64/14.2 ... 64-1gv.txz - all ok.
This makes me think porteus script has issue.
I think so, too.
Re: Porteus-v3.2rc4 bug reports
Posted: 16 Jul 2016, 19:14
by Slaxmax
porteus rc4 where?
Re: Porteus-v3.2rc4 bug reports
Posted: 16 Jul 2016, 19:38
by Jack