[Solved] 3.0.1 : pxe and copy2ram doest not work together
Posted: 06 Nov 2014, 17:02
Hello
Booting from a usb key (containing raw copy of an iso hybrid of Porteus 3.0.1) and attempting to launch
shows the following error message during the boot :
(No hard disk is present in the computer. The objective is to remove the USB and let the computer run alone.)
The boot continues normally.
But when attempting to boot a client thru PXE in that config, it will never boot even if it find the DHCP.
(I did test without copy2ram and everything works as exepected.)
Jean-Marc
Booting from a usb key (containing raw copy of an iso hybrid of Porteus 3.0.1) and attempting to launch
Code: Select all
vmlinuz copy2ram initrd=initrd.xz pxe utc
Code: Select all
/opt/porteus-scripts/pxe-server: line 45 : /mnt/sda1/boot/syslinux/initrd.xz: No such file or directory
The boot continues normally.
But when attempting to boot a client thru PXE in that config, it will never boot even if it find the DHCP.
(I did test without copy2ram and everything works as exepected.)
Jean-Marc