Page 1 of 2
USM v3.1.4 errors
Posted: 09 Sep 2014, 03:44
by Rava
I still get the
usm update error, even after upgrading to Port 3.0.1
This happened when I activate my old usm-database module:
Code: Select all
root@porteus:~# usm version
You are using USM version: 3.1.4
root@porteus:/var# usm -u all
root@porteus:/mnt/live/memory/images# usm -u all
alien was already updated today. Skipping.
Starting salix database update
Downloading: vercheck.txt DONE
Downloading: CHECKSUMS.md5 DONE
Downloading: PACKAGES.TXT DONE
Downloading: LIBS.TXT.gz DONE
Downloading: OPTIFEST.gz DONE
Downloading: MANIFEST.bz2 DONE
bunzip2: /var/usm/salix/MANIFEST.bz2 is not a bzip2 file.
==============================================================================
WARNING! WARNING! WARNING! WARNING! WARNING!
==============================================================================
One or more errors occurred while usm was running:
FATAL ERROR!
usm update_database 232
Could not decompress: MANIFEST.bz2
==============================================================================
root@porteus:/mnt/live/memory/images# file /var/usm/salix/MANIFEST.bz2
/var/usm/salix/MANIFEST.bz2: gzip compressed data, from Unix, max speed
When none of you can reproduce this error... could it be I access a salix mirror different from you guys?
Then I deactivated my usm-database module and also rm -r /var/usm. Now it's kinda worse since
usm froze, and after ^C I get the same error:
Code: Select all
root@porteus:/var# usm -u all
Starting alien database update
Downloading: vercheck.txt DONE
Downloading: CHECKSUMS.md5.gz DONE
Downloading: MANIFEST.bz2 DONE
Downloading: PACKAGES.TXT.gz DONE
Downloading: LIBS.TXT.gz DONE
File verification was good.
Optimizing manifest
alien database updated.
Updating config file
[usm freezes]
^C
root@porteus:/var# usm -u all
alien was already updated today. Skipping.
Starting salix database update
Downloading: vercheck.txt DONE
Downloading: CHECKSUMS.md5 DONE
Downloading: PACKAGES.TXT DONE
Downloading: LIBS.TXT.gz DONE
Downloading: OPTIFEST.gz DONE
Downloading: MANIFEST.bz2 DONE
bunzip2: /var/usm/salix/MANIFEST.bz2 is not a bzip2 file.
==============================================================================
WARNING! WARNING! WARNING! WARNING! WARNING!
==============================================================================
One or more errors occurred while usm was running:
FATAL ERROR!
usm update_database 232
Could not decompress: MANIFEST.bz2
==============================================================================
Also,
downloading is not working. What do I do wrong?
Code: Select all
root@porteus:~# usm -s git-1
git-1.8.4-x86_64-1.txz was found in slackware
Packages found: 1
Use: usm -i <package> for more info
Use: usm -g <package> to download
root@porteus:~# usm -i git-1.8.4-x86_64-1
Package: git-1.8.4-x86_64-1.txz (3836 K) [not installed]
git: git (the stupid content tracker)
git:
git: Git is a fast, scalable, distributed revision control system with an
git: unusually rich command set that provides both high-level operations
git: and full access to internals.
git:
git: "git" can mean anything, depending on your mood.
git:
git: Git was originally written by Linus Torvalds and is currently
git: maintained by Junio C. Hamano.
git:
root@porteus:~# usm -g git-1.8.4-x86_64-1
Nothing found for: git-1.8.4-x86_64-1
root@porteus:~# usm -g git-1.8.4-x86_64-1.txz
Nothing found for: git-1.8.4-x86_64-1.txz
Why does usm -i work and usm -g not?
Re: USM v3.1.4 errors
Posted: 09 Sep 2014, 04:23
by Ed_P
Re: USM v3.1.4 errors
Posted: 09 Sep 2014, 14:01
by brokenman
From a fresh v3.0.1 this is what I get:
Code: Select all
root@porteus:/mnt/sda8/projects/kiosk/storage# usm -v
You are using USM version: 3.1.4
root@porteus:/mnt/sda8/projects/kiosk/storage# usm -g git
The following items were found.
Choose an number to confirm.
ctrl+c to quit
1) git-1.8.4-x86_64-1.txz
could it be I access a salix mirror different from you guys?
No. The MANIFEST.bz2 file is downloaded from sourceforge as it doesn't exist in salix. In fact you can open the file /etc/usm/files.txt and remove MANIFEST.bz2 from the salix section as it is not needed anymore. (will update next release).
So my advice would be to do:
usm -u usm
Then try updating the databases.
Re: USM v3.1.4 errors
Posted: 09 Sep 2014, 19:40
by Rava
I also get an error, but it seems to work:
Code: Select all
root@porteus:/var# usm -u usm
Downloading: vercheck.txt DONE
An update is available for the usm database files.
Please run: usm -u all
A new version of USM is available.
Would you like to download it now? [y/n]
Downloading: usm-latest-0.0-noarch-1.txz DONE
Would you like to install it now? [y/n]
No such package: /var/log/packages/usm-*. Can't remove.
Installing new version now
xz: (stdin): File format not recognized
usm-latest-0.0-noarch-1: [0K]
WARNING: Package has not been created with 'makepkg'
USM was updated successfully
You are currently using:
USM-v3.1.4
How do I create an usm-3.1.4.xzm, or even better, how to update the module of Port 3.0.1 that has the outdated usm?
//edit
Found a typo in the help:
nodeps: No dpepndency resolution.
-> "nodeps: No dependency resolution."
Re: USM v3.1.4 errors
Posted: 09 Sep 2014, 23:26
by brokenman
No such package: /var/log/packages/usm-*. Can't remove.
In a default porteus install there should be the package: /var/log/packages/usm-*
This is not so important, but it shows that your Porteus install has been modified?
You are currently using:
USM-v3.1.4
The latest version is USM-v3.1.6
The typo nodeps: No dpepndency resolution. was fixed in 3.1.6
How do I create an usm-3.1.4.xzm, or even better, how to update the module of Port 3.0.1 that has the outdated usm?
You can download a module from
here
Or download and install the .txz package from the same address. Thanks.
Re: USM v3.1.4 errors
Posted: 12 Sep 2014, 19:36
by Rava
brokenman wrote:The latest version is USM-v3.1.6
Downloaded and activated the module, now all seems to work fine... Searching and updating the databases is OK...
But...
downloading still not works:
Code: Select all
root@porteus:/mnt/live/memory# usm -s midori
midori-0.5.8-x86_64-1ponce.txz was found in ponce
midori-0.5.8-x86_64-2gv.txz was found in salix
Packages found: 2
Use: usm -i <package> for more info
Use: usm -g <package> to download
root@porteus:/mnt/live/memory# usm -i midori-0.5.8-x86_64-1ponce.txz
Package: midori-0.5.8-x86_64-1ponce.txz (2716 K) [not installed]
midori: midori (simple web-browser)
midori:
midori: midori is a simple web-browser, based on the webkit framework.
midori:
midori:
midori:
midori: Homepage: http://midori-browser.org/
midori:
midori:
midori:
midori:
root@porteus:/mnt/live/memory# usm -g midori-0.5.8-x86_64-1ponce.txz
Nothing found for: midori-0.5.8-x86_64-1ponce.txz
root@porteus:/mnt/live/memory# usm -g midori-0.5.8-x86_64-1ponce
Nothing found for: midori-0.5.8-x86_64-1ponce
When running the usmgui it said something along the line of "brokenman needs to update [... some file ...]"
When I see that error again I will post it...
Re: USM v3.1.6 errors
Posted: 13 Sep 2014, 07:44
by Rava
Got another issue just now...
usm v3.1.6 has issues updating the databases.
Code: Select all
root@porteus:/var/usm/alien# usm -u all
alien was updated 14 seconds ago. Skipping.
salix was updated 14 seconds ago. Skipping.
slacky was updated 14 seconds ago. Skipping.
Starting ponce database update
Downloading: vercheck.txt DONE
Downloading: CHECKSUMS.md5.gz DONE
Downloading: MANIFEST.bz2 DONE
Downloading: PACKAGES.TXT.gz DONE
Downloading: LIBS.TXT.gz DONE
Optimizing manifest
ponce database updated.
Updating config file
slackware was updated 20 seconds ago. Skipping.
slackwarepatches was updated 20 seconds ago. Skipping.
Starting sbo database update
SLACKBUILDS.TXT.gz
Downloading: SLACKBUILDS.TXT.gz DONE
sbo database updated.
Updating config file
Downloading: extra-deps.txt DONE
Downloading: ignore-deps.txt DONE
root@porteus:/var/usm/alien# ls -l
total 412
-rw-r--r-- 1 root root 166887 Sep 11 00:43 CHECKSUMS.md5
-rw-r--r-- 1 root root 35972 Sep 11 09:21 LIBS.TXT
-rw-r--r-- 1 root root 77606 Sep 11 09:21 OPTIFEST
-rw-r--r-- 1 root root 136850 Sep 11 09:21 PACKAGES.TXT
root@porteus:/var/usm/alien# date
Sat Sep 13 09:35:13 CEST 2014
Not only usm is mistaken when alien was updated ("14 seconds ago. Skipping.") but same is true for:
- "salix was updated 14 seconds ago. Skipping."
"slacky was updated 14 seconds ago. Skipping."
"slackware was updated 20 seconds ago. Skipping."
"slackwarepatches was updated 20 seconds ago. Skipping."
All these have last been updated 2 days ago... still usm insists that instead of 2 days, it was 14 or 20 seconds ago...
Re: USM v3.1.4 errors
Posted: 14 Sep 2014, 16:14
by brokenman
Once you've updated to v3.1.6 please provide output of: usm info
Re: USM v3.1.6 errors
Posted: 14 Sep 2014, 21:53
by Ed_P
brokenman wrote:Once you've updated to v3.1.6
It sounds like he has upgraded to it.
Rava wrote:Got another issue just now... usm v3.1.6 has issues updating the databases.
Re: USM v3.1.4 errors
Posted: 16 Sep 2014, 20:01
by Rava
brokenman, here you go:
Code: Select all
root@porteus:/usr/local/bin# usm info
++++++++++++++++++++++++++++++
usm application information
USM version: 3.1.6
DB version: 140901
Current storage: /tmp/usm
Current config: /etc/usm/usm.conf
Current platform: Porteus-v3.0.1
Current arch: x86_64
Slackware Slackware 14.1
Current kernel 3.14.15-porteus
Current distros: slackware slackwarepatches slacky salix alien ponce
quiet initrd=initrd.xz sgnfile=intHDE.sgn ramsize=45% zram=20% timezone=Europe/Berlin volume=75% kmap=de BOOT_IMAGE=vmlinuz
Use: usm -i <package>
For example: usm -i imagemagick
(This is without my usm databases module loaded, fresh after reboot)
Re: USM v3.1.6 errors
Posted: 25 Sep 2014, 11:20
by Rava
And another update. Usm version is still 3.1.6.
Code: Select all
root@porteus:/var# usm -s alpine
alpine-2.11-x86_64-1.txz was found in slackware
Packages found: 1
Use: usm -i <package> for more info
Use: usm -g <package> to download
root@porteus:/var# usm -g alpine-2.11-x86_64-1.txz
Nothing found for: alpine-2.11-x86_64-1.txz
root@porteus:/var# usm -g alpine-2.11-x86_64-1
Nothing found for: alpine-2.11-x86_64-1
Sadly, I am not able to download any package via usm...
Also, this
probably minor bug:
Code: Select all
root@porteus:/Lsfind# usm -u usm
Downloading: vercheck.txt DONE
/usr/share/usm/funcupdateDatabase: line 381: [: -gt: unary operator expected
No database updates were found.
/usr/share/usm/funcupdateDatabase: line 394: [: -gt: unary operator expected
You have the current USM version.
Re: USM v3.1.4 errors
Posted: 25 Sep 2014, 19:42
by beny
sorry rava but with slackware in portable way usm work great:
Processing: alpine-2.11-x86_64-1.txz
Ignored libraries:
Libraries required: 10
Libraries found in system: 10
Libraries to resolve: 0
The following packages are required.
alpine-2.11-x86_64-1.txz [1896K]
Total size: 1 MB
Press [r] to remove packages, [q] to quit, or enter to start downloading.
Updates are available.
Program update: not required
Database update: available
Please run: usm -u all and/or usm -u usm
This message can be disabled in /etc/usm/usm.conf
###############################
Downloading: alpine-2.11-x86_64-1.txz DONE
well isn't porteus but it is the same i have a full environment.
SM version: 3.1.6
DB version: 140901
Current storage: /tmp/usm
Current config: /etc/usm/usm.conf
Current platform: UNKNOWN
Current arch: x86_64
Slackware Slackware 14.1
Current kernel 3.12.6
Current distros: slackware slackwarepatches slacky salix alien ponce
quiet auto BOOT_IMAGE=vmlinuz-3.12.6
Re: USM v3.1.4 errors
Posted: 27 Sep 2014, 22:30
by Rava
^
*facedesks* I am at my wit's end... maybe I did an mistake when I included the current usm in my Port 3.0.1 xzm...
Creating my updated 001-core.xzm I renamed it to to 001-core-rava-usm_3.1.6.xzm to reflect the changes made in it.
Re: USM v3.1.6 errors
Posted: 28 Sep 2014, 05:45
by Rava
*Update*
I activated the usm-noarch-3.1.6 module... that should have fixed any potential errors I made while including usm in my 001- module... but to no preveail. It keeps getting to this:
Code: Select all
root@porteus:/# usm -s gimp
gimp-2.8.6-x86_64-1.txz was found in slackware
Packages found: 1
Use: usm -i <package> for more info
Use: usm -g <package> to download
root@porteus:/# usm -g gimp-2.8.6-x86_64-1.txz
Nothing found for: gimp-2.8.6-x86_64-1.txz
... or could it be that the error is somehow
connected to another error...
I run usm via XFCe's terminal... I either use "su" or "su -" there. But even "su -" behaves strange...
from man su:
-, -l, --login
Provide an environment similar to what the user would expect had
the user logged in directly.
When - is used, it must be specified as the last su option. The
other forms (-l and --login) do not have this restriction.
Going to the home directory using "cd" ... gets me to ~ ... but it is
not /root, but /home/guest...
Could this be the reason why my usm behaves strangely?
///
Update
Nope, just tried it in the virtual terminal where I logged in as root directly. There a "cd" gets me to "/root", so the above issue is not there. Still I get the same old error as quoted on top of this post.
Anyway, I don't see anything about dependencies... Gimp needs at least babl and gegl... Would that be solved during the download phase (that's not working for me?)
Re: USM v3.1.4 errors
Posted: 28 Sep 2014, 11:55
by Bogomips
Code: Select all
root@porteus:/home/guest# usm -g gimp-2.8.6-x86_64-1
Nothing found for: gimp-2.8.6-x86_64-1
root@porteus:/home/guest# usm -g gimp
The following items were found.
Choose an number to confirm.
ctrl+c to quit
1) gimp-2.8.6-i486-1.txz
#? 1
Processing: gimp-2.8.6-i486-1.txz
Ignored libraries:
Libraries required: 95
Libraries found in system: 78
Libraries to resolve: 17
Processing library: libaa.so.1
Processing library: libbabl-0.1.so.0
Processing library: libgegl-0.2.so.0
Processing library: libgimp-2.0.so.0
Processing library: libgimpbase-2.0.so.0
Processing library: libgimpcolor-2.0.so.0
Processing library: libgimpconfig-2.0.so.0
Processing library: libgimpmath-2.0.so.0
Processing library: libgimpmodule-2.0.so.0
Processing library: libgimpthumb-2.0.so.0
Processing library: libgimpui-2.0.so.0
Processing library: libgimpwidgets-2.0.so.0
Processing library: libgs.so.9
Processing library: libjasper.so.1
Processing library: libpoppler.so.43
Processing library: libwmf-0.2.so.7
Processing library: libwmflite-0.2.so.7
Processing: aalib-1.4rc5-i486-5.txz
8)