Hi,
here is the evolution of the problem.
1) When I insert a USB Key it create the good name on /media and the sdb1 exist on /dev
2) I created manually /mnt/sdb1 as root to mount it and I got this error :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
3) When I use an external HDD with its own power supply then I could mount this kind of external HDD and be able to use it. But a simple USB Key can not be mounted automatically or manually.
Then I removed all my modules and tried again. Nothing changed.
Now I presume it comes from the fact I tried to install the possibility to write in chinese where I got a bad downloaded package and solved it succefully manually. But I am still not able to write chinese. And I currently try to solve this USB Key real problem. May be Ahau could tell me which files was maybe changed and I need to set it back to got this USB Key automoun/mount available.
Sincerely thanks for your help and have a good night.
Miguipda ;-)
==============
Following your remarks :
> which desktop (please fill this info in your profile so i wont have to ask this question again)?
I am on KDE
> is your flash stick formatted?
Of course I use it since many days and still work on Windoz
> please post an error you are getting in terminal when trying to mount it as root and also output of 'dmesg | tail -n50'.
Code: Select all
[ 12.651611] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.651623] Bluetooth: BNEP filters: protocol multicast
[ 12.651650] Bluetooth: BNEP socket layer initialized
[ 13.259125] Adding 3148116k swap on /dev/sda3. Priority:1 extents:1 across:3148116k
[ 13.643526] NET: Registered protocol family 10
[ 34.892666] ata1.00: configured for UDMA/133
[ 34.892684] ata1: EH complete
[ 34.965212] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 35.383197] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 215.248051] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 215.364416] scsi6 : usb-storage 1-3:1.3
[ 215.418461] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
[ 215.418588] usbcore: registered new interface driver usblp
[ 216.368825] scsi 6:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
[ 216.371181] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 319.767126] sd 6:0:0:0: [sdb] 15659007 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 319.768241] sd 6:0:0:0: [sdb] No Caching mode page present
[ 319.768251] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 319.770609] sd 6:0:0:0: [sdb] No Caching mode page present
[ 319.770620] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 319.793029] sdb: sdb1
[ 323.589707] FAT-fs (sdb1): Unrecognized mount option "iocharset=" or missing value
[ 326.695700] FAT-fs (sdb1): Unrecognized mount option "iocharset=" or missing value
[ 414.999336] sdb: detected capacity change from 8017411584 to 0
[ 440.112716] sd 6:0:0:0: [sdb] 15659007 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 440.113842] sd 6:0:0:0: [sdb] No Caching mode page present
[ 440.113857] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 440.116215] sd 6:0:0:0: [sdb] No Caching mode page present
[ 440.116230] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 440.128713] sdb: sdb1
[ 443.627274] FAT-fs (sdb1): Unrecognized mount option "iocharset=" or missing value
[ 455.874716] usb 1-3: USB disconnect, device number 4
[ 455.875178] usblp0: removed
[ 483.863048] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[ 483.979789] scsi7 : usb-storage 1-6:1.0
[ 484.984359] scsi 7:0:0:0: Direct-Access ChipBank SD/MM Reader 4080 PQ: 0 ANSI: 2
[ 484.986236] sd 7:0:0:0: [sdb] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 484.987243] sd 7:0:0:0: [sdb] Write Protect is off
[ 484.987261] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 484.988272] sd 7:0:0:0: [sdb] No Caching mode page present
[ 484.988288] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 484.992215] sd 7:0:0:0: [sdb] No Caching mode page present
[ 484.992226] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 484.993110] sdb: sdb1
[ 484.997233] sd 7:0:0:0: [sdb] No Caching mode page present
[ 484.997244] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 484.997253] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 485.486684] FAT-fs (sdb1): Unrecognized mount option "iocharset=" or missing value
[ 510.317332] FAT-fs (sdb1): Unrecognized mount option "iocharset=" or missing value
[ 572.568102] FAT-fs (sdb1): Unrecognized mount option "iocharset=" or missing value