Broadcom BCM57780 GbE controller
Forum rules
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
-
- White ninja
- Posts: 8
- Joined: 05 May 2014, 13:34
- Distribution: Porteus 3
- Location: Otrava, Czech Republic
Broadcom BCM57780 GbE controller
Hello.
I need to PXE boot Porteus kiosk on embedded intel motherboard http://www.winmate.com.tw/BoxPc/Embedde ... od=05_0144. I setup the environment and everythig works great on virtual machines (Hyper-V and Virtual BOX). But on this motherboard kiosk won't start. PXE downloads files from TFTP but then I get error from udhcpc "ioctl 0x8933 failed: no such device" and I finish in command prompt. The problem is probably with driver for my NIC (Broadcom BCM57780). I have only loopback adapter network interface. I've found this page: https://wiki.archlinux.org/index.php/Ne ... m_BCM57780 but I have no idea how I can make this configuration for kiosk edition.
I also tried to boot kiosk edition (latest version) from USB and the problem is the same. GUI wizard on startup can't initialize (wired) network
I need to PXE boot Porteus kiosk on embedded intel motherboard http://www.winmate.com.tw/BoxPc/Embedde ... od=05_0144. I setup the environment and everythig works great on virtual machines (Hyper-V and Virtual BOX). But on this motherboard kiosk won't start. PXE downloads files from TFTP but then I get error from udhcpc "ioctl 0x8933 failed: no such device" and I finish in command prompt. The problem is probably with driver for my NIC (Broadcom BCM57780). I have only loopback adapter network interface. I've found this page: https://wiki.archlinux.org/index.php/Ne ... m_BCM57780 but I have no idea how I can make this configuration for kiosk edition.
I also tried to boot kiosk edition (latest version) from USB and the problem is the same. GUI wizard on startup can't initialize (wired) network
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: Broadcom BCM57780 GbE controller
this bug has been confirmed by at least 2 other users, gmc here and one on a mail:
http://forum.porteus.org/viewtopic.php?f=103&t=3538
looks like tg3 driver from 3.12.20 kernel (used in kiosk 3.1 and soon to be released 3.1.1) does not work with this controller.
you may try to boot some linux livecds on this box and once you find working kernel then i could port it to kiosk through 'customized builds' service:
http://porteus-kiosk.org/builds.html
kernel replacement is the only way i'm afraid.
http://forum.porteus.org/viewtopic.php?f=103&t=3538
looks like tg3 driver from 3.12.20 kernel (used in kiosk 3.1 and soon to be released 3.1.1) does not work with this controller.
you may try to boot some linux livecds on this box and once you find working kernel then i could port it to kiosk through 'customized builds' service:
http://porteus-kiosk.org/builds.html
kernel replacement is the only way i'm afraid.
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 8
- Joined: 05 May 2014, 13:34
- Distribution: Porteus 3
- Location: Otrava, Czech Republic
Re: Broadcom BCM57780 GbE controller
Thank you for fast response fantom! So Porteus Kiosk prior 3.1 should work? May I download some previous version (3.0.x) to test it?
I'll try some live CDs and send you results. Thanks
I'll try some live CDs and send you results. Thanks
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: Broadcom BCM57780 GbE controller
i dont know the answer to this question as first bug reports were with kiosk 3.1So Porteus Kiosk prior 3.1 should work?
you may try some old ones from here:May I download some previous version (3.0.x) to test it?
http://ponce.cc/porteus/i486/archive/
mind that these are only a vanilla ISOs and kiosk wizard (even the old one) wont work with them.
for the clarity: i was referring to any livcd (could be Slax or even latest Ubuntu) as all what we need to do is to determine a kernel version which works with Broadcom BCM57780 NIC and then compile this particular kernel and use it in kiosk.
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 8
- Joined: 05 May 2014, 13:34
- Distribution: Porteus 3
- Location: Otrava, Czech Republic
Re: Broadcom BCM57780 GbE controller
I downloaded current SLAX iso, put it on USB, boot it on my box and NIC works with no problems.
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: Broadcom BCM57780 GbE controller
was it slax-7.0.8?
i'm worrying that the problem is in kiosk kernel configuration rather than kernel version. to be 100% sure please download and try latest Manjaro 32bit which has exactly the same kernel (3.12.20) as kiosk 3.1:
http://downloads.sourceforge.net/manjar ... 0-i686.iso
if Manjaro works then we are in troubles as it emans that i need to track which option (or rather lack of it) in kiosk's kernel config causes problems.
thanks
i'm worrying that the problem is in kiosk kernel configuration rather than kernel version. to be 100% sure please download and try latest Manjaro 32bit which has exactly the same kernel (3.12.20) as kiosk 3.1:
http://downloads.sourceforge.net/manjar ... 0-i686.iso
if Manjaro works then we are in troubles as it emans that i need to track which option (or rather lack of it) in kiosk's kernel config causes problems.
thanks
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 8
- Joined: 05 May 2014, 13:34
- Distribution: Porteus 3
- Location: Otrava, Czech Republic
Re: Broadcom BCM57780 GbE controller
Hi.
Yes it was current slax 7.0.8. This morning I tried manjaro from your link and NIC is working with no problems. So we have problem only with Porteus. I'm going to test Porteus desktop edition now...
Yes it was current slax 7.0.8. This morning I tried manjaro from your link and NIC is working with no problems. So we have problem only with Porteus. I'm going to test Porteus desktop edition now...
-
- White ninja
- Posts: 8
- Joined: 05 May 2014, 13:34
- Distribution: Porteus 3
- Location: Otrava, Czech Republic
Re: Broadcom BCM57780 GbE controller
I downloaded Porteus desktop edition 64bit, text (no GUI), no modules and network card works! May I help you anyhow to make it working in Kiosk?
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: Broadcom BCM57780 GbE controller
so it's definitely a missing option in kiosks kernel configThis morning I tried manjaro from your link and NIC is working with no problems.
you could test the kernel i compile but new kiosk release is scheduled for December so it may take some time till i prepare it (unless you want to go with commercial 'customized builds' solution).May I help you anyhow to make it working in Kiosk?
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 8
- Joined: 05 May 2014, 13:34
- Distribution: Porteus 3
- Location: Otrava, Czech Republic
Re: Broadcom BCM57780 GbE controller
Thank you for info.
So next free try is in December or you can try compile kernel with other options for this NIC earlier?
What could be the price and term for solution to our problem with network card?
So next free try is in December or you can try compile kernel with other options for this NIC earlier?
What could be the price and term for solution to our problem with network card?
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: Broadcom BCM57780 GbE controller
correctSo next free try is in December or you can try compile kernel with other options for this NIC earlier?
the price depends if kiosk will be used for commercial purposes (is made for a company) or will serve local community (is made for a public institution) or is meant for a private use.What could be the price and term for solution to our problem with network card?
regarding term: if i knew which option i need enable then i could deliver testing ISO even tomorrow. unfortunately i will have to search google or (if google fails to give an answer) take a hammer approach and compile suspicious options in the kernel till we find one which is really needed.
i would say early next week is more realistic date for providing a working kiosk ISO.
if you are still interested - please contact me on builds@porteus-kiosk.org and we will discuss the details.
thanks
Please add [Solved] to your thread title if the solution was found.