wishes - new
Forum rules
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
Porteus Kiosk section of the forum is unmaintained now. Its kept in a 'read only' mode for archival purposes.
Please use the kiosk contact page for directing your queries: https://porteus-kiosk.org/contact.html
-
- White ninja
- Posts: 23
- Joined: 26 Feb 2016, 14:36
- Distribution: -
- Location: tambov rossia
wishes - new
wish:
- implement the setting in the config page zoom
- implement the possibility to remap CTRL+/- for any other key + scroll mouse
- implement the setting in the config page zoom
- implement the possibility to remap CTRL+/- for any other key + scroll mouse
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: wishes - new
Hello Sergei,
"implement the setting in the config page zoom"
For Firefox you could try 'browser_preferences=' parameter:
http://porteus-kiosk.org/parameters.htm ... references
and use 'layout.css.dpi' preference as described here:
https://wiki.archlinux.org/index.php/fi ... _DPI_value
"implement the possibility to remap CTRL+/- for any other key + scroll mouse"
I doubt many users would benefit from this feature and i wont accept any addons in the official build (they often goes outdated/incompatible). Please follow these instructions:
http://dottech.org/157597/how-to-change ... tcuts-tip/
Thanks
"implement the setting in the config page zoom"
For Firefox you could try 'browser_preferences=' parameter:
http://porteus-kiosk.org/parameters.htm ... references
and use 'layout.css.dpi' preference as described here:
https://wiki.archlinux.org/index.php/fi ... _DPI_value
"implement the possibility to remap CTRL+/- for any other key + scroll mouse"
I doubt many users would benefit from this feature and i wont accept any addons in the official build (they often goes outdated/incompatible). Please follow these instructions:
http://dottech.org/157597/how-to-change ... tcuts-tip/
Thanks
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 23
- Joined: 26 Feb 2016, 14:36
- Distribution: -
- Location: tambov rossia
Re: wishes - new
how to unlock Ctrl+scrol mouse ?
-
- White ninja
- Posts: 23
- Joined: 26 Feb 2016, 14:36
- Distribution: -
- Location: tambov rossia
Re: wishes - new
what about the tasks hot key to determine the IP or mac kiosk?
-
- White ninja
- Posts: 23
- Joined: 26 Feb 2016, 14:36
- Distribution: -
- Location: tambov rossia
Re: wishes - new
and the introduction of a random variable for hostname you can implement?
example - hostname=firma1_filial2_4*1-9) => microsoft_moskva_1234
or even better, add to the name of the PC polednik digits of the mac address
example - hostname=firma2_mac => microsoft_1234
example - hostname=firma1_filial2_4*1-9) => microsoft_moskva_1234
or even better, add to the name of the PC polednik digits of the mac address
example - hostname=firma2_mac => microsoft_1234
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: wishes - new
Hello Sergei,
"how to unlock Ctrl+scrol mouse ?"
Perhaps you need to remaster instalaltion ISO and edit 003-settings.xzm/etc/xdg/openbox/rc.xml.
"the introduction of a random variable for hostname you can implement?"
Please use 'run_command=' parameter which supports shell scripting syntax:
http://porteus-kiosk.org/parameters.html#run_command
Example:
Of course you need to write proper code to get the MAC.
"how to unlock Ctrl+scrol mouse ?"
Perhaps you need to remaster instalaltion ISO and edit 003-settings.xzm/etc/xdg/openbox/rc.xml.
"the introduction of a random variable for hostname you can implement?"
Please use 'run_command=' parameter which supports shell scripting syntax:
http://porteus-kiosk.org/parameters.html#run_command
Example:
Code: Select all
run_command=hostname $(get_mac_function)
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 23
- Joined: 26 Feb 2016, 14:36
- Distribution: -
- Location: tambov rossia
Re: wishes - new
Thank you.
I understand what to edit original image wizard makes no sense?
still xzm sway with the installation of the new from the Internet.
ie need to rebuild the iso has already been created?
ifconfig -a | grep eth0 |grep HWaddr .
but how it to change, I can not do it.
I understand what to edit original image wizard makes no sense?
still xzm sway with the installation of the new from the Internet.
ie need to rebuild the iso has already been created?
the maximum that know how to get the row with the Mac address.Of course you need to write proper code to get the MAC.
ifconfig -a | grep eth0 |grep HWaddr .
but how it to change, I can not do it.
Re: wishes - new
I tried to force 150% zoom by pointing to a config withfanthom wrote:Hello Sergei,
"implement the setting in the config page zoom"
For Firefox you could try 'browser_preferences=' parameter:
http://porteus-kiosk.org/parameters.htm ... references
user_pref("zoom.minPercent", 150);
user_pref("zoom.maxPercent", 150);
Result is: Firefox still starts in 100%.
However, when I do STRG+mousewheel (= manual zooming) then it jumps to 150% and stays there = the parameters do go into effect, but are ignored at start.
any suggestions how to reach specific zoom level from start?
Thanks and regards,
Sebastian
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: wishes - new
"I understand what to edit original image wizard makes no sense?"
It does make sense - please follow my instructions.
"the maximum that know how to get the row with the Mac address.
ifconfig -a | grep eth0 |grep HWaddr .
but how it to change, I can not do it."
'hostname' command does that. Again - you should follow my instructions.
"any suggestions how to reach specific zoom level from start?"
you could use run_command= parameter. Sleep for 20 seconds (to make sure the browser actually starts) and then emulate Ctrl++ key press with xdotool utility.
Google has many examples how to use xdotool.
It does make sense - please follow my instructions.
"the maximum that know how to get the row with the Mac address.
ifconfig -a | grep eth0 |grep HWaddr .
but how it to change, I can not do it."
'hostname' command does that. Again - you should follow my instructions.
"any suggestions how to reach specific zoom level from start?"
you could use run_command= parameter. Sleep for 20 seconds (to make sure the browser actually starts) and then emulate Ctrl++ key press with xdotool utility.
Google has many examples how to use xdotool.
Please add [Solved] to your thread title if the solution was found.
-
- White ninja
- Posts: 23
- Joined: 26 Feb 2016, 14:36
- Distribution: -
- Location: tambov rossia
Re: wishes - new
i.e. the command hostname $(get_mac_function) will work?'hostname' command does that. Again - you should follow my instructions.
and no need to invent code ?
- fanthom
- Moderator Team
- Posts: 5667
- Joined: 28 Dec 2010, 02:42
- Distribution: Porteus Kiosk
- Location: Poland
- Contact:
Re: wishes - new
Yes - you need to write code to get the MAC address.
Please add [Solved] to your thread title if the solution was found.